COPA - upload hierarchy from R/3 to BW - version

Hi,
we have crated via t-code KES3 user hirerarchy on the COPA user characteristic ( country). I created new Data Source in tr. KEB1 for this COPA char and BW InfoObject 0COUNTRY. There is a problem with uploading hier. data because property for hierarchy in BW IO 0COUTRY is set up as a hierarcchy "time dependent", but generated DataSource from R/3 does not contain valule data validity FROM TO. The DataSourec gives date 00.00.0000. The same is problem for depending BW hier on the version. Please how to solve it. Is possible to add time validity on the R/3 side? Thank Tom

Hi Krishna,
Pls use BW07 & BW10 Tcodes for generating the Hierarchy Data Source in R/3.
For External Hierarchy in BW , download to Flatfild and then upload.
The useful link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
**PLS assign points,if info is useful***
Regards
CSM Reddy
Message was edited by: REDDY CSM

Similar Messages

Upload hierarchy from flat file to BPC

Hello SAP Guru,
I have download customer / material hierarchy in flat flie from BI/BW and now I want to upload hierarchy from flat file to BPC
Please can any one give me step by step method to load hierarchy from Flat file to SAP - BPC.
Thanks in advance.
With regards,
Anand Kumar

Hi Saida Reddy,
why you resurrect a 5 years old thread? Surely he solved in the meanwhile his issue, see please dr Frankenstein.
Regards
Roberto

Issue in uploading Hierarchy from BW to SEM BCS

Hi All,
We are getting the following error while trying to upload the hierarchy from BW to SEM BCS.FYI , Hierarchy is loaded into BW but it still throws an error.
Error is : No hierarchies for InfoObject 0PROFIT_CTR available in BW.
Can somebody help me out ...
Regards,
Jeevan

Hi Eugene,
I am loading from BW (0PROFIT_CTR) hierarchy to SEM BCS.
I am loading thru "Load from data stream".
Following are the steps :
1.Selected data type "Consolidation unit"
2.Selected characteristic "Profit Center"
3.In the settings tab,
a) I also maintained "source data basis" with the Infoobject cataloag & I used the same.
b) selected "0profit_ctr" infoobject.
c)also selected the check boxes "load master data" & "load hierarchy".
4)In the mapping tab, selected all the necessary fields and mapped correctly.
5)In the selection tab,maintained controlling area = 1000 .
6)after the steps 1to 5, executed the method.
It gives an error "No hierarchy exists in BW for profit center ".
Can you tell me, do we need to do any other steps before executing the method.
Regards,
Jeevan

Error while uploading data from a flat file to the hierarchy

Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Sri

there is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go.

How do I upload CDs from my PC to my ipod using the cloud?

How do I upload CDs from my PC to my ipod using the cloud?

The iTUnes sync syncs the contents of a folder you choose. ANd it handles only one folder at a time.
What I did to keep things straight, was to make a separate folder inside the 'my photos' part of my computer. Then put in that folder copies of things I wanted on my iPad. I could then add/remove from that folder as the mood struck and since everything in there was a copy I wouldn't lose any. (you would add/remove from the folder, then do a sync to allow iTunes to update that folder on your iPad to match the folder on your PC)
Another way, to get away from maintaining a folder, if you don't have a ton of photos, just e-mail them to yourself, save them from that e-mail. Keep them on the iPad as long as you like, then you can delete them as you wish. Photos that are synced onto the iPad must be synced off (as in removed from that folder then a sync performed to remove them)
E-mailing the photos to yourself gives you more flexibility in managing them on the iPad.

How do I upload photos from my PC to my ipad without deleting the photos already on my ipad?

How do I upload photos from my PC to my ipad without deleting the photos already on my ipad???

The iTUnes sync syncs the contents of a folder you choose. ANd it handles only one folder at a time.
What I did to keep things straight, was to make a separate folder inside the 'my photos' part of my computer. Then put in that folder copies of things I wanted on my iPad. I could then add/remove from that folder as the mood struck and since everything in there was a copy I wouldn't lose any. (you would add/remove from the folder, then do a sync to allow iTunes to update that folder on your iPad to match the folder on your PC)
Another way, to get away from maintaining a folder, if you don't have a ton of photos, just e-mail them to yourself, save them from that e-mail. Keep them on the iPad as long as you like, then you can delete them as you wish. Photos that are synced onto the iPad must be synced off (as in removed from that folder then a sync performed to remove them)
E-mailing the photos to yourself gives you more flexibility in managing them on the iPad.

Uploading data from a windows mobile device to a server using GPRS

I want to upload data from a java application in pda (a Windows Mobile 6.1 device) to a server using a GPRS connection.My application uses a IBM weme VM.
I want to know whether I can do this in Java itself,because otherwise I would have to resort to some C++ methods(that uses the connection manager api) and call that using jni. But if there is some java method for this,it would have been helpful and straightforward..
Can I do this using socket connection in java? if so, Would somebody provide a code snippet ?Which port to connect to in that case?
Plz let me know about this.
Thanks in advance.
Edited by: shreya_ann on Sep 23, 2010 4:44 AM

Hey forum....
When I dock my Windows Mobile device in a Windows 7 PC, the Windows Mobile Device Center opens and I can browse the device and copy files between it and the PC. However, I'm looking some kind of way to automate this process. All I'm really interested in
is a single file named TEXT.TXT which is stored in the My Documents folder. Basically, I'm looking for a script that will detect the Windows device (it's USB-attached) when docked, find the file TEXT.TXT in the My Documents folder and then copy this file to
the /Temp folder on the desktop.
I've tried using the synchronization feature of WMDC but it copies the file to a documents folder set up for the specific device. Instead, I'm looking to find and copy the file to C:\TEMP regardless of the device.
Thanks in advance for any help!
Everett
Just configure the device to sync the folders you want to sync. Start by reading the help very carefully.
This is not a scripting question and this forum is not for end user questions. I suggest posting in the Windows Phone forum.
You can also sync via OneDrive over a cellular or wireless connection.
¯\_(ツ)_/¯

Uploading HierarchyData from a flatfile in 2.0B

Hi All,
Can Anyone help me on "How to Upload HierarchyData from a flatfile in 2.0B".
I want to upload three levels data .
Orgunit>Position>Person . I am confused, how should
i maintained columns order in flatfile and in BW side.
Pls clarify this.
Is it possible from r/3 to BW, i.e 0ORGUNIT_HR01_HIER data source Having only one level(0orgunit). I need other levels also.
Please help me ..
Regards,
Srilaxmi.

Hi Laxmi,
The file will have a column for InfoObject. I'll mail you the document that I have but the best way to proceed is to first draw the entire hierarchy including all the levels for e.g.
0ORGUNIT                 10010001 (1)
00RGUNIT         10010002 (2)              10010003 (7)
                   /         \               |
0HRPOSITION   40010001 (3) 40010002(5)    40010003 (8)
0PERSON       80010001 (4) 80010002(6)     80010004 (9)
Then you can read it from top to bottom and then left to right for e.g.
Then you can read it from top to bottom and then left to right for e.g.
Node    InfoObject   Level        Parent      Next      Child
1        0ORGUNIT      1                         2
2        0ORGUNIT      2         1         7     3
3        0HRPOSITION   3         2         5     4
4        0PERSON       4         3
5        0HRPOSITION   3         2               6
6        0PERSON       4         5
7        0ORGUNIT      2         1               8
8        0HRPOSITION   3         7               9
9        0PERSON       4         8
The column that I've left out is the value column. For e.g. the actual org unit value 10010001. Parent, next and child all refer to node id's.
With regards to having more than one level on the org unit hierarchy on R/3. This is definately possible - you can many, many levels on R/3. Normally a BW person won't change the main version of the hierarchy for his needs, the structure of the hierachy is determined by the business structure.
I've also mailed through the documentation for the help.
Hope this is helping you.
Kind regard,
Dorothy

Unable to upload files from local computer to remote server (Was: Dreamweaver)

I have lost the connection between the remote location and the local location for files on my computer. Where to I correct this issues, since I cannot upload files from local to remote. Host server from server to my computer works fine, Running Dell computerr XP operating system with CS3 Dreamweaver. Need all the help I can get.

I am now having a "ftp error - cannot make connection to host. Dreamweaver
encoutered a netwoerk or file system error. I did as you suggested and I
get to basic site definition, ( which looks o.k.), next screen ( no,I do
not want to use a server technology) Next screen ( edit local copies on my
machine ( file location looks o.k.), next screen (connect to remote
server=ftp) address of web server is correct, ( no folder on server, or ftp
login or ftp password) do not enable check in or check out
summary: local
Site name:midhba
local root folder:midhba
remote info:
access; ftp
FTP host: midhba.com
check in.check out diabled
testing server (set up later)

Problem uploading pictures from my computer to internet

I just got my new imac. I have since uploaded two "events" in iPhoto and wanted to upload some of these pictures from my computer to some online programs (flikr etc..). But when I go to choose the photos to upload, I go to user - pictures - and then there is iPhoto Library and Photobooth. But photobooth is the only one that has a little arrow allowing me to choose the pictures in that folder. Iphoto library doesn't have an arrow and therefore doesn't even seem to read that there are indeed photos in the library. What is going on??
PLEASE HELP.

cmhudson33
Welcome to the Apple Discussions.
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
If you're uploading to a site via a web browser, the procedure is to use the File -> Export option and export the pics to the desktop. Then upload them from there. After the upload you can trash the pics on the desktop - they are only copies and the originals are safe in iphoto.
Regards
TD

How to load hierarchy from file into InfoObject with compounding Attr & LN

Hi,
I have created an InfoObject called YCOSTC0 which has a compounding attribute 0CO_AREA. and Text is Lanugage dependent, hence the key is YCOSTC0, 0CO_AREA and LANGUAGE, now when i load hierarchy from flat file as mentioned below, it creates duplicate blank rows in master data table, becuase the flat file contains only the YCOSTC0 Info Object and this data gets loaded into 0CO_AREA column in master data table which is the first column. how can i load hierarchies from flat file into an InfoObject that has a compounding attribute and Language dependent. please provide me a sample file structure with data.
NodeID     InfoObject     Node Name     Link Name     Parent ID     Language     Short Text     Medium Text     Long Text
1     0HIER_NODE     CC_HIER               EN     Cost Center Heirarchy     Cost Center Heirarchy     Cost Center Heirarchy
2     YCOSTC0     C001          1     EN     CC 1     Cost Center 1     Cost Center 1
3     YCOSTC0     C002          2     EN     CC 2     Cost Center 2     Cost Center 2
4     YCOSTC0     C003          2     EN     CC 3     Cost Center 3     Cost Center 3
5     YCOSTC0     C004          3     EN     CC 4     Cost Center 4     Cost Center 4
6     YCOSTC0     C005          3     EN     CC 7     Cost Center 7     Cost Center 7
7     YCOSTC0     C006          4     EN     CC 5     Cost Center 5     Cost Center 5
8     YCOSTC0     C007          4     EN     CC 8     Cost Center 8     Cost Center 8
9     YCOSTC0     C008          4     EN     CC 10     Cost Center 10     Cost Center 10
10     YCOSTC0     C009          7     EN     CC 6     Cost Center 6     Cost Center 6
11     YCOSTC0     C010          6     EN     CC 9     Cost Center 9     Cost Center 9
Thanks
Akila R

Hi -
    Check the following link.
Hierarchy Upload from Flat files
Anesh B

How to Create Hierarchy From Flat file Structure

Hi Gurus,
There is a scenario for me regarding the Hierarchy.
Required Hierarchy structure - Region>Director>Manager-->Sales id
I have flat file which gives the info like user id , sales id , manager id, director id.
But the transaction data Flat file has structure with sales id, region id, sales amt, sales qty.
Note : Region id is another Master Data.
How i can create hierarchy from the first flat file which doesnot have region info in that but it is available in the transaction data Flat file.
Is there anyway we can create hierarchy based on the first Flat file structure which contains more that 1,00,000 records.
Try to Suggest me in this regard .
This is urgent.
Regards,
Mano

Hi Mano,
                Defining the source system from which to load data
Choose the source system tree File ® Create.
       2.      Defining the InfoSource for which you want to load data
Optional: choose InfoSource Tree ® Root (InfoSources) ® Create Application Components.
Choose InfoSource Tree ® Your Application Component ® Other Functions ® Create InfoSource 3.x ® Direct Update.
Choose an InfoObject from the proposal list, and specify a name and a description.
       3.      Assigning the source system to the InfoSource
Choose InfoSource Tree ® Your Application Component ® Your InfoSource ® Assign Source System. The transfer structure maintenance screen appears.
The system automatically generates DataSources for the three different data types to which you can load data.
○       Attributes
○       Texts
○       Hierarchies (if the InfoObject has access to hierarchies)
The system automatically generates the transfer structure, the transfer rules, and the communication structure (for attributes and texts).
       4.      Maintaining the transfer structure / transfer rules
Select the DataSource for uploading hierarchies.
IDoc transfer method: The system automatically generates a proposal for the DataSource and the transfer structure. This consists of an entry for the InfoObject for which hierarchies are loaded. With this transfer method, the structure is converted to the structure of the PSA during loading, which affects performance.
PSA transfer method: The transfer methods and the communication structure are also generated here.
       5.      Maintaining the hierarchy
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy
Hope this helps
Regards
Karthik
Assign points if Helpful

How to upload blob from forms6i

Hi,
Anyone has idea how to upload blob
using forms6i ?????
Mehul

Hi,
Set-AzureStorageBlobContent copies a file from the host it is run on to Azure Blob Storage. Running this cmdlet on your local machine means it will copy files from your local machine to Azure Blob Storage. Running this cmdlet in a runbook means it will copy
files from the sandbox running the runbook to Azure Blob Storage. Runbooks have no access to your local machine, since they run in Azure.
If you want to interact with files on your local machine from within runbooks, you need to put the local files into Blob Storage, and then download them from Blob Storage within the runbook.
Here's an example of PowerShell you could put in a runbook to download files from Blob Storage:
$AzureConnectionName = "SomeAzureConnectionAssetName"
$TempFileLocation = "C:\abc.cscfg"
$StorageAccountName = "MyStorageAccount"
$ContainerName = "MyContainer"
$BlobName = "MyDeploymentConfig.cscfg"
Connect-Azure -AzureConnectionName $AzureConnectionName
InlineScript {
Select-AzureSubscription -SubscriptionName $Using:AzureConnectionName
$StorageAccount = (Get-AzureStorageAccount -StorageAccountName $Using:StorageAccountName).Label
Set-AzureSubscription `
-SubscriptionName $Using:AzureConnectionName `
-CurrentStorageAccount $StorageAccount
$blob =
Get-AzureStorageBlobContent `
-Blob $Using:BlobName `
-Container $Using:ContainerName `
-Destination $Using:TempFileLocation `
-Force

Syntax error while loading hierarchy from an external file

Dear Expert:
I am new to BW and I met a problem today while loading hierarchy from an external file. Actually I am following below article to load the hierarchy:
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
When I schedule the infopackage, the error message says: "Syntax error in template RSTMPL9C, ROW 76". Actually there is only around 20 lines of records.
Since I am not familiar with hierarchy load, so:
1. while loading from external file, do I need to create one hierarchy in advance through "Maintain Hierarchies" in the infoobject? My understanding is since I can load that hierarchy from file, so I do not need to create one in advance, once the load completed, the hierarchy should automatically generated there. Is my understanding correct?
2. Before loading the hierarchy, do I need to load the master data of external characteristics in the hierarchy first? Here in my example, the sales hierarchy has 2 external characteritics (Country and region) in the hierarchy. Do I need to load some data first?
3. My 'Preview' function in the infopackage is gray so that I can not test the data loading. Why is it gray?
Information like file name, file dir, file type(csv), seperator should be correct there.
Can anybody help me take a look into that? Many thanks for your time in advance!
Tim

Hi ctsiszidane:
There are some other SAP Notes that can help you solve the problem. Depending on your Support Package level check which of them is applicable.
Note 659461 - RSAR 682: Syntax error in template RSTMPL9A, row 246
Note 605690 - Escape characters are not processed correctly
Note 620152 - Syntax error in RSTMPL9A during data loading from a file
Regards,
Francisco Milán.

How to lod Hierarchy from one info object to anothe info object

Dear Friends,
I am facing one problem with the loading of hierarchy from one object to another.
Please find my scenario below.
We are having 0material with hierarchy.This hierarchy is loading from R/3.We have to load this hierarchy to anothe object by replacing the nodes.So can you guys please suggest how to achieve this.Please let me know if you people are required additional information.
Thanks in advance.
Regards
Madhu

Hi Madhu,
By default, you cant use a transformation to load data into the Hierarchy Master data.
I havent tried it myself, but for you to explore, I'll suggest the below idea.
Write an ABAP program to download the hierarchy table data from 0material into a flat file.
Create flat file datasource to upload hierarchy to the other infoobject.
Put both of them in a process chain and execute one after another.
Hope this helps. Pls let us know.
Regards,
Bijesh

COPA - upload hierarchy from R/3 to BW - version

Similar Messages

Maybe you are looking for