COPA Valuation when Billing posting, the exchange rage M
To anybody met this kid of situation,
Controlling area currency: USD
Company code currency: RMB
When i am doing costing run the result of components could be saved by both of RMB and USD.
But when billing is being posted, the amount of cost components is recalculated by exchange rate M again.
As a result, the amount of costing run in RMB and the amounts posted to PA in RMB are not consistent.
Anybody knows how to solve this problem ? Please advice.
Thanks very much.
Hi,
In case of postings with VPRS system will always calculate
operating concern currency (if it's different from company code
currency) using exchange rate type 'M' (notes 429517 and 547570).
Is it your rpoblem? Value of VPRS in operating concern currency during billing?
If yes, you should code enhancement COPA0005.
That's what we did to address this issue.
Cheers,
Szymon
Similar Messages
-
When i post the invoice in MIRO Bill of lading number not displayed
Hi,
When i post the goods receipt i entered the bill of lading number .When i try to post the invoice with reference to the PO ( for which i had done goods receipt) bill of lading number not populated in the corresponding field.I can see the field in MIRO but it is not having the value.I have the same issue, did you get a response to your problem. If yes please share it.
Thanks
AL -
I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, SheilaTV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!
-
When billing, forward the sale cost
Dear All.
about billing and forwarding sale cost. we now do according to the following two steps.
A .When do goods issues(Mvt:601).the system generate the below accounting document:
Dr: Cost of Goods Sold
Cr: Stock-Finished goods
B.When billing, the system generate the below accounting document:
Dr: Accounts Receivable
cr: Sales income.
but there is some faults according the above steps,because do month-closing,perhaps do goods issue but don't billing ,so the income and the cost won't macth.
my problem is how configure in system can generate the following effect:
when do goods issue:the system generate the below accounting document:
Dr: Stock-Finished goods-in transist
Cr: Stock-Finished goods
B.When billing, the system generate the below accounting document:
Dr: Accounts Receivable
cr: Sales income.
Dr:Cost of Goods Sold
cr:Stock-Finished goods-in transist
Best regards.Hi,
No is no other way.
You have to bill the goods delivered in old period only.
Then only you can generate P&L Stmt correctly. -
As I read these various posts I see that blackberry users are innovative, demanding, creative, particular but effective smartphone users. However sometimes our frustration manifests in the typical comments such as:
Come on blackberry how the eff could you not include in the z10 "mypin" auto generation in sms. How the $hit do you think I invite most of my bbm contacts, not as many people are using blackberries you know so the email invite (yes it generates in email mode so you can simply copy and paste) is not as efficient any more. There i am done ranting
What if we knew blackberry's attentions were focused in this support forum, and through it they could make sure their updates meet the needs of their users? If bb'ers begin posting ideas within categories that would effectively cover all aspects from application/ interface adjustments to developments blackberry devices could effectively grow with the user. It is a beautifully reciprocal experience as companies/individuals will have free market research and power of change.
Companies and developers can simply calculate if they have a positive return on their investment of time, cost, resourcess and efforts. Whether it be a company who is interested in direct billing, a contract or advertising OR a customer is interested in attempting to impact a change. Both sides have a vested interest. People could see how many others potentially like their new ideas whether in be in the realm of functionality or applications. I have been told (and have read a bit) Linux systems are an awesome example of how ideas mixed with creativity, critique, feedback and passion drive the force that is innovation, which is amazing.
We have the opportunity to create what could include even more people now. As mobile technology spans the globe and should call for impeccable security, who better to afford you and your ideas both the collaberation potential with the luxury and security of the safest network in the business. Since the phone is complete as a unit superficially; shape and weight are perfect for a phone, 3.5 small buttons on the whold device, and perfect size screen for communication and visual needs, (also read my post on external battery charger.....bravo blackberry),there would only be a need for minor external and relative internal improvements as technology requires adaptation. Thus the only thing to really continue to work on is the interface and user experience.
It is a work of balance and interdependence as both consumer/creator roles are shared by all parties within the company/owner and the open market. The customer experiences the ability for impact on their own environment and efficiency/comfort withn that through application and function improvements, and blackberry gets happy loyal customers and supporters.
If we knew could post ideas with the help of blackberry of course (online tallies ballot system etc) to provide numbers or structure or to help guide the process of evolution in regards to this aspect of our lives (obviously they cannot make every change in the same amount of time as they would have to balance attending to ideas with great support to addressing ones with fewer numbers but specific ideas. Also the factor of people who like the option as it is or would support change would have to be taken into consideration. ) than I am certain our dispositions would change when we encounter an obstacle because we know there is option for remedy.
For example with a great enough support for lets say to change a function of operation, there is also the possibility that the idea would simply inspire blackberry to offer it in various modes like ringtones notification or options within program settings are. I am sure as a group of intelligent users we could contribute to the establishment of a ratio for attending to the necessary factors involved. How does it work with linux systems?
We would have to be patient of course as this would take time to gain the momentum it would require to have turnaround be speedy when it occurs. It could happen, remember happy people are patient people. Show us you hear us, make some of the changes that we see and address over and over in this post and it is inevitable you will see an increase in users and ideas which will only keep the progress in motion.
Eventually every idea reaches a point where you decide if there is enough reason to continue to develop, practise, or refine it. If not you simply move on to your next idea. Blackberry If you allow people to share ideas on an item that is so vastly involved in our daily lives how could you not continue to receive support.
If not this (as this is simply ones persons idea ) , then please blackberry, establish something that shows you hear and acknowledge us because you have a dedicated group of driven and precis users who simply want their blackberry to work because they see its true potential and it has the ability to surpasses all other mobile experiences in terms of convenience and output as it once did. Some of your users are also financial supporters who believe enough in what you have the potential to create they invest their own hard earned money. I am both and I am certain others are in the same situation. I have never been so frustrated and so happy with the same item than I have at different points throughout my years with blackberry. The customer support or lack of voice has been my biggest concern. We scrutinize your products daily, we have some of the best feedback for you, but without a reception they will only turn into complaints or rants.
Offer the capacity for impact at a level no one else has to this point in the game has. As you prepare to launch to one of the biggest user markets in the world see that there is the potential to also create one of the largest communities of innovation in the world.
Smartphone users collectively creating a device that would be both seamless and secure anywherre it went on the globe Owning the software and the hardware affords you this ability to offer us some input to some level. The ability to adjust to your users constantly changing environment is what every business owner should strive for. Listen to your customers before they end up in the rant section of their forum. Please continue to let blackberry know we would like to have our feedback heard.
Thank youAs I read these various posts I see that blackberry users are innovative, demanding, creative, particular but effective smartphone users. However sometimes our frustration manifests in the typical comments such as:
Come on blackberry how the eff could you not include in the z10 "mypin" auto generation in sms. How the $hit do you think I invite most of my bbm contacts, not as many people are using blackberries you know so the email invite (yes it generates in email mode so you can simply copy and paste) is not as efficient any more. There i am done ranting
What if we knew blackberry's attentions were focused in this support forum, and through it they could make sure their updates meet the needs of their users? If bb'ers begin posting ideas within categories that would effectively cover all aspects from application/ interface adjustments to developments blackberry devices could effectively grow with the user. It is a beautifully reciprocal experience as companies/individuals will have free market research and power of change.
Companies and developers can simply calculate if they have a positive return on their investment of time, cost, resourcess and efforts. Whether it be a company who is interested in direct billing, a contract or advertising OR a customer is interested in attempting to impact a change. Both sides have a vested interest. People could see how many others potentially like their new ideas whether in be in the realm of functionality or applications. I have been told (and have read a bit) Linux systems are an awesome example of how ideas mixed with creativity, critique, feedback and passion drive the force that is innovation, which is amazing.
We have the opportunity to create what could include even more people now. As mobile technology spans the globe and should call for impeccable security, who better to afford you and your ideas both the collaberation potential with the luxury and security of the safest network in the business. Since the phone is complete as a unit superficially; shape and weight are perfect for a phone, 3.5 small buttons on the whold device, and perfect size screen for communication and visual needs, (also read my post on external battery charger.....bravo blackberry),there would only be a need for minor external and relative internal improvements as technology requires adaptation. Thus the only thing to really continue to work on is the interface and user experience.
It is a work of balance and interdependence as both consumer/creator roles are shared by all parties within the company/owner and the open market. The customer experiences the ability for impact on their own environment and efficiency/comfort withn that through application and function improvements, and blackberry gets happy loyal customers and supporters.
If we knew could post ideas with the help of blackberry of course (online tallies ballot system etc) to provide numbers or structure or to help guide the process of evolution in regards to this aspect of our lives (obviously they cannot make every change in the same amount of time as they would have to balance attending to ideas with great support to addressing ones with fewer numbers but specific ideas. Also the factor of people who like the option as it is or would support change would have to be taken into consideration. ) than I am certain our dispositions would change when we encounter an obstacle because we know there is option for remedy.
For example with a great enough support for lets say to change a function of operation, there is also the possibility that the idea would simply inspire blackberry to offer it in various modes like ringtones notification or options within program settings are. I am sure as a group of intelligent users we could contribute to the establishment of a ratio for attending to the necessary factors involved. How does it work with linux systems?
We would have to be patient of course as this would take time to gain the momentum it would require to have turnaround be speedy when it occurs. It could happen, remember happy people are patient people. Show us you hear us, make some of the changes that we see and address over and over in this post and it is inevitable you will see an increase in users and ideas which will only keep the progress in motion.
Eventually every idea reaches a point where you decide if there is enough reason to continue to develop, practise, or refine it. If not you simply move on to your next idea. Blackberry If you allow people to share ideas on an item that is so vastly involved in our daily lives how could you not continue to receive support.
If not this (as this is simply ones persons idea ) , then please blackberry, establish something that shows you hear and acknowledge us because you have a dedicated group of driven and precis users who simply want their blackberry to work because they see its true potential and it has the ability to surpasses all other mobile experiences in terms of convenience and output as it once did. Some of your users are also financial supporters who believe enough in what you have the potential to create they invest their own hard earned money. I am both and I am certain others are in the same situation. I have never been so frustrated and so happy with the same item than I have at different points throughout my years with blackberry. The customer support or lack of voice has been my biggest concern. We scrutinize your products daily, we have some of the best feedback for you, but without a reception they will only turn into complaints or rants.
Offer the capacity for impact at a level no one else has to this point in the game has. As you prepare to launch to one of the biggest user markets in the world see that there is the potential to also create one of the largest communities of innovation in the world.
Smartphone users collectively creating a device that would be both seamless and secure anywherre it went on the globe Owning the software and the hardware affords you this ability to offer us some input to some level. The ability to adjust to your users constantly changing environment is what every business owner should strive for. Listen to your customers before they end up in the rant section of their forum. Please continue to let blackberry know we would like to have our feedback heard.
Thank you -
Adobe Ilustrator stop working when I use the Exchange Panel
I try to use the Adobe Exchange Panel in ilustrator but it stop working when I click on "my stuff" button
What platform and version are you using? If CS6 try updating to 16.04.
-
I ran EntreCheck in case this is helpful in diagnosing the problem:
EtreCheck version: 1.9.15 (52)
Report generated September 29, 2014 5:11:17 PM EDT
Hardware Information: ?
MacBook Pro (Retina, 13-inch, Late 2012) (Verified)
MacBook Pro - model: MacBookPro10,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: 768 MB
Color LCD 2560 X 1600
System Software: ?
OS X 10.8.5 (12F45) - Uptime: 0 days 0:3:18
Disk Information: ?
APPLE SSD SM256E disk0 : (251 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Harddrive (disk0s2) / [Startup]: 250.14 GB (47.24 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
Startup Items: ?
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.sonos.smbbump.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.quickmenu.application.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items: ?
BoxSyncHelper
iTunesHelper
Microsoft Database Daemon
Dropbox
SAVDiskMountNotify
ScanNotification
Launch Nikon Message Center 2
ConnectService
SymSecondaryLaunch
Internet Plug-ins: ?
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 6.0 Support
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
CitrixICAClientPlugIn: Version: 11.5.0 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
AdobePDFViewer: Version: 10.1.10 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 25 Check version
Audio Plug-ins: ?
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
3rd Party Preference Panes: ?
Box Sync Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Perian Support
SymAutoProtect
Symantec\nQuickMenu Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU: ?
7% WindowServer
3% Dock
1% fontd
1% SymAutoProtect
0% BoxSyncEngine
Top Processes by Memory: ?
819 MB SymAutoProtect
205 MB mds
172 MB Safari
156 MB Dock
131 MB WebProcess
Virtual Memory Information: ?
3.97 GB Free RAM
2.27 GB Active RAM
87 MB Inactive RAM
1.67 GB Wired RAM
297 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
IIS service not showing when I use the get-exchangeCertificate | fl cmdlet
Hello All,
I just installed a 3rd party digital certificate to my Exchange 2010 via powershell then assigned the 4 services IIS, pop, smtp, imap but when I use the get-exchangecertificate | fl cmdlet the IIS service is not showing.The rest of the services were fine.
During the process of installing the certificate via powershell, I got a message that says: Do you want to enforce SSL communication on the root web
site? If not, rerun the cmdlet with the -DoNotRequireSSL parameter. I said No to all and the operation continued. By the way, I also invoke the iisreset /restart right after installing the digital
certificate. I then proceeded to install my root certificate and intermediate certificates. All were imported successfully via certificate snap-in. When I access the exchange 2010 EMC console, the status for the Exchange Certificate still says pending certificate
signing request. Not sure if that is related at all to the fact that IIS service is not showing amongst the assigned services listed. Any idea why IIS service is not in the list of assigned services for Exchange certificate?? Can I re-run my powershell and
repeat my steps, but this time just assigned IIS service alone? Or should I re-run powershell altogether and assign all 4 services again??? Also, what about the pending certificate signing request in the EMC console should I process and complete the request??
Any advise is appreciated. Let me know please.
Thanks!
Lotusmail1
Franz GarciaHi Lotusmail1,
Please run the following command to just assign IIS service to this third-party certificate (using certificate 5113ae0233a72fccb75b1d0198628675333d010e as a example), then run Get-ExchangeCertificate to check it again:
Enable-ExchangeCertificate -Thumbprint 5113ae0233a72fccb75b1d0198628675333d010e -Services IMAP,POP,IIS,SMTP
Regards,
Winnie Liang
TechNet Community Support -
My web pages aren't loading when connected to the internet through Ethernet cable?
Yesterday my web pages stopped loading on Safari. I tried loading them on google chrome and had the same problem. I then deleted all saved web site data and reset Safari but this still didn't solve the problem. Finally I restarted with safe mode, where the web pages loaded, but slowly, however when I restarted normally the web pages still weren't loading or partially loading. To test whether this was my computer or the ethernet cable I was connected to, I connected to the wifi at my university, where the web pages loaded perfectly. Plus, when connected to the ethernet cable I could Skype, use Spotify etc., it is just the web pages that are causing a problem. Any suggestions how I can fix this? Thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ \(\2\)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caught bu|GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi Experts,
When I post the Idoc from the external system to the SAP,I am getting the
error as application document not posted and status code as 52.so what I need
to do to overcome this error,please help me over this issue.
Regards,
Kiran.Hi,
you have to check the idoc in debugg mode and pull it out the reason why i has 52 and you know how to debug inbound - go to we19 and here give any existing idoc no and press F8 and enter into screen, in that select 'INBOUND FUNCTION MODULE' select give ur standard F.M name and select the background mode.
or thre way is goto BD87 make the correct the error idoc manually.
--Use Tcode BD87 to check for IDocs that are not been processed and reactivate.
u can find here if any data wrong or missing.
<b>Reward if useful</b>
Regards,
Vijay -
Part2 tab not coming after posting the part1 through J1IEX
Dear Experts,
when I post the part1 entry through J1IEX,
Part2 entry tab not shown when i display the document,
please advice me where the required config is missed,
thanks in advance
lakshmi reddyDear,
In your case, Check your input Tax code in Purchase Order . If its modavatable then when you tick at migo item ok Excise Tab must be displayed at header level. After posting when you see MIGO document, check at header level excise tab and see part2 entry.
More general look like you have inputed wrong tax code.
Regards,
Rajesh koladiya -
Hi,
When we post the park document, the following error Message showing.
No Batch Input data for Screen SAPMF05A 0302
What is the problem and how to solve this?
Thanks in advanceHello,
Refer SAP Note 1226243 - Parking the fields BSEG-VERTT, BSEG-VERTN, BSEG-VBEWA
Regards,
Ravi -
Error oocuring after posting the IDOC
Hi
i am getting a error in a scenario
the scenario is Idoc to file. when we post the IDoc, its getting posted successfully. but the pipiline is getting failed at the inbound message when monitoring in SXMB_MONI.
i am getting the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Inbound Message --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIAdapter</SAP:Category><SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code>
<SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/>
<SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>ALEAUDIT IDoc cannot find request IDoc in Integration Server
</SAP:Stack><SAP:Retry>N</SAP:Retry></SAP:Error>
all the experts help me out in solving this issueHi Deepika,
their might be some problems with ur ALE settings.
Here is a detail of the steps to be followed.
Do verify whether u have done the steps or repeat the steps as stated:
Steps for ALE settings:-
Steps for XI
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the R3 system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto IDX1.
Create a new port.
Give the port name.
Give the client number for the R3 system.
Select the created Rfc Destination.
Step 3)
Goto IDX2
Create a new Meta data.
Give the Idoc type.
Select the created port.
Steps for R3.
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the XI system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto WE21.
Create a port under transactional RFC.(R3->XI)
Designate the RFC destination created in prev step.
Step 3)
Goto SALE.
Basic settings->Logical Systems->Define logical system.
Create two logical systems(one for XI and the other for R3)
Basic settings->Logical Systems->Assign logical system.
Assign the R3 logical system to respective client.
Step 4)
Goto WE20.
Partner type LS.
Create two partner profile(one for XI the other for R3).
Give the outbound or inbound message type based on the direction.
Step 5)
Goto WE19
Give the basic type and execute.
fill in the required fields.
Goto IDOC->edit control records.
Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
Click outbound processing.
Step 6)
Go to SM58
if there are any messages then there is some error in execution.
Goto WE02.
Check the status of the IDOC.
Goto WE47.
TO decode the status code.
Step 7)
Not mandatory.
Goto BD64.
Click on Create model view.
Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check) -
Hi,
when iam posting the goods iam getting the following error.
Account 160000 for trans./event key WRX is a K control account
The account automatically determined by the system in this case is a control account, which is not relevant to this goods movement.
How to resolve this.
Thanks.Hi,
GL A/c 160000 is a Reconciliation A/c for Vendor, which is to be assigned in Vendor Master.
Check in FS00 for GL A/c 160000 > Control Data > Recon. account for acct type "K" ie. Vendors
Create a new GL A/c for GR/IR Clearing and assign to WRX in OBYC, it should not have anything in "Recon. account for acct type" field. -
How to post the revenue on exchange rate in SAP ?
Hi All,
a Company gets a g.l. bank account in USD (account currency). The local currency is EUR.
2010.01.01: its balance was 9.527,23 USD (account currency). Given a currency exchange rate 1 USD x 1,4406 EUR, the amount of the account in local currency was 6.613,38 EUR.
2010.01.15: the bank account is closed. Given a currency exchange rate 1 USD x 1,4374 EUR, the amount of the account in local currency is 6.628,10 EUR
When the account bank is closed the balance in local currency is 14,72 EUR -
2010.01.01 --> 9.527,23 USD (account currency); 6.613,38 EUR (local currency).
2010.01.15 --> 9.527,23 USD (account currency); 6.628,10 EUR (local currency).
20.01.15: in local currency I've to post a revenu of 14,72 EUR
Could anyone tell me which account posting I've to do for this revenue?
ThanksThe differemce is due to exchange rate difference post the difference in a new g/l name it exchange rate diff. revenue account for more read below:
Exchange Rate Rounding Differences
When an invoice is posted in a foreign currency, the amounts are translated into local currency. Since the system rounds off the amounts in each posting line, this can lead to rounding differences due to the currency translation.
These differences are posted to an expense or income account.
During the document check, the system displays a posting line for the corresponding account.
Thanks,
Vishal
Maybe you are looking for
-
When I Click on some of the bookmark folders I do get a dropdown list of sites but not always all of the sites that were bookmarked. If I copy a nonresponding folder, the new copy can be accessed but apparently does not contain all of the sites. If I
-
I can get the currently logged in user's first name from the profile object as p.getAttributeString("iwtUserInfoProvider-firstName") and I can get the role (assuming I set it as user-readable) as p.getAttributeString("iwtUser-role"). I can't seem to
-
Create a validation for check double invoice
Hi, I have read here on SDN for check double invoice on reference number. We want to create an warning message if same reference number is posted twice, not depending on invoice date. So if I, on 1st of October have posted an invoice with reference n
-
Sql question : TRUNCATE vs Delete
hi this is sql question, i don't know where i should post it, so here it is. i just want to know the best usage of each. both commands delete records in a table, one deletes all, and the other can do the same plus option to delete specified records.
-
How do I uninstall Adobe 9.3.3 from my Macbook Pro?
I downloaded an Adobe Reader update yesterday and since then my Pdf files are taking 10 minutes to print! I have never had this problem before. I have a HP Laserjet 3390 printer. I would like to uninstall the Adobe Reader and re-install an older vers