Copia de repositorio de Oracle Designer version 10.1.2.6
Estamos trabajando en un repositorio del Oracle Designer v.10.1.2.6. Necesitamos hacer una copia de un repositorio creando uno nuevo para modificaciones especiales.
Hemos intentado con el export/import y copia los objetos (tablas, diagramas) pero no sus elementos (columnas, triggers, etc).
Necesitamos realizar una copia ya sea por fuera (copia del datafile) y attacharlo al Designer, o realizar la exportacion de todos los elementos de un container sin controlar las dependencias.
Como podriamos lograrlo??
Gracias!
My problem is solved . I was using wrong jar file...
Thanks Francois.......It is a great tool!!!!
Edited by: Nishu on Jun 16, 2010 3:00 PM
Similar Messages
-
Cannot delete anything in Oracle Designer version 10.1.2.4 get RME-02014
did not occur in version 10.1.2.3
seems to be a new bug introduced in version 10.1.2.4
fixed by:
alter system set "_optimizer_cost_based_transformation"=off scope=both;
see thread
Does Designer 10g work on 11gMy problem is solved . I was using wrong jar file...
Thanks Francois.......It is a great tool!!!!
Edited by: Nishu on Jun 16, 2010 3:00 PM -
Designer Version for O9i ver. 9.2.0.1.0 ?
Hi,
Where can i get Oracle Designer version that goes with Oracle 9.2.0.1.0 for Win2K ?
I have downloaded the ones currently available -
A99230-01.zip
A99231-01.zip
But these are for 9.0.2.0.1 and while installing this on top of 9.2.0.1.0, it gives error "Oracle9iAS cannot be installed into an existing Oracle9i 9.2.0.1.0 or higher Oracle Home"
There seems to be a version mis-match. Where can i get the latest one for my 9.2.0.1.0 ?
Thnx.Hi Suneet,
There is actually no 9i Designer version 9.2.0.1.0.
From the information you provided, it seems you are
trying to install the full 9iDS pack (9.0.2.0.1) on
the top of a 9.2.0.1.0 database, which I would not
advise. Install the products in this way:
1) 9i database 9.2.0.1.0 into one home
2) 9iDS 9.0.2.0.1 pack into a separate home
3) 9i Designer 9.0.2.5.0 into the iDS home
9i Designer 9.0.2.5.0 is available from our Designer
pages here on OTN.
Hope this helps.
Regards,
Dominic
Designer Product Management
Oracle Corp -
Error when trying to copy a work area in Oracle designer
In oracle designer,I tried to copy a work area by selecting.
File-->>Change work area.
Then from the "Work area" pop up window,I selected the new option.
In the Create work area wizard i chose "Copy a work area" and gave the Name ,description and the work area to be copied.
When i click the finish button,I am getting the following error.
"CDR-01005: Workarea compilation failed: ORA-01422: exact fetch returns more than requested number of rows. "
Please let me know how to copy a work area in Oracle designer.
Thanks in advance.Note 277801.1
Views Return Records From The Wastebasket.
Possible Symptoms
~~~~~~~~~~~~~~~~~
1) executing a SELECT FROM CI_... views return more rows than expected.
2) SELECT ... INTO ... FROM CI_... views raises error
ORA-1422: exact fetch returns more than requested number of rows.
3) Deleting an object from the repository fails with the following errors:
RME-00020: Internal API error -
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "<repos_owner>.JR_NAME", line 3680
ORA-06512: at "<repos_owner>.JR_NAME", line 4138
ORA-06512: at "<repos_owner>.JR_ERROR", line 193
ORA-06512: at "<repos_owner>.SDD_TAB_D", line 961
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-04088: error during execution of trigger '<repos_owner>.SDD_TAB_D'
NB: the name of the trigger (SDD_TAB_D in the above example) will vary
depending on the object type you are deleting
4) Compilation of a Workarea fails with the following errors:
CDR-01005: Workarea compilation failed:
ORA-01422: exact fetch returns more than requested number of rows.
Workaround
~~~~~~~~~~
For symptoms 1 and 2, define the context of a workarea before selecting from
the CI_... views:
exec jr_context.set_workarea ('<Workarea Name>');
For the other symptoms, the errors are caused by RDBMS bugs that were fixed
in the last patch set releases of databases.
We recommend that you upgrade to a version of the database that is certified
with the release of Designer that you are using.
See Note 60705.1 for details -
How to track changes made in the ERD in oracle designer
I want to track all changes made in my ERD in oracle 10g designer. Please suggest how to achieve it.
use case: An ERD was approved in design phase. Few changes were made by development team and now in Implementation phase I need to track what all changes were made from say 3-Jan-12 to 3-Mar-2012
Edited by: 909570 on Mar 5, 2012 1:14 PM
To add here:
Designer Version is 10.1.2.0.2.
1. In my project versioning of ER is not being used so ER Version diff is not an option for me.
2. In Reports, there are options for getting all entities, attributes which are created/modified in a period. But it seems it is not giving me correct results.
Edited by: 909570 on Mar 5, 2012 1:14 PMSince versioning if off, there is no way to track changes.
You can get a rough overview of possible changes by looking at the audit attributes (date created, date modified) in the properties palette, but that is already mentioned in your point 2.
Basically, developers should comment what they added/modified. -
How i will run copy the file in oracle 7.3 ?
how i will run copy the file in oracle 7.3.
new version of oracle copy function is available in util_file but in oracle 7.3 this is not available.here i am using 7.3.
please help
Thanks
Deepak S.The technique used to be to send messages from your procedure to a waiting shellscript listener using DBMS_PIPE. You would write a script (could be ksh, Perl, Ruby etc) on the server with a loop in which it connects to the database and waits for DBMS_PIPE messages. When it gets one, it executes the command that was contained in the message and loops around to continue waiting again.
7.3 is really ancient though. If you're running it at all this far out of support it should really just be ticking over and not subject to new development. -
Oracle Designer 10g With Oracle 11g DB possible
Hi,
Please clarify my below query,
we are currently using oracle designer 10g and deploying the components to production DB which is in oracle 9i, We are planning to migrate to oracle supported version 11g DB, since oracle designer 11g is not there we would be sticking to oracle 10g itself, Now my question is, will we be having issues or road blocks with this combination Oracle designer 10g and Oracle 11g DB???
Regards
Bala@Erik
Don't have a doc id. You have to go to the certication tab in My Oracle Support. Search for Oracle Designer 10.1.2.6.0 there you will find the three supported database version.
Oracle Designer 10.1.2.6.0 is certified with Oracle Database 11.2.0.1.0 on Microsoft Windows (32-bit) XP
Oracle Designer 10.1.2.6.0 with Oracle Database 11.2.0.1.0
Customers must review MetaLink Doc 1299040.1 Application Design Transformer Hangs at 65% when running against Oracle 11gR2
Certified with:
Oracle Fusion Middleware 10g 10.1.2.0.2 Oracle Developer Suites 10g 10.1.2.0.2 Oracle AS/DS Patch Set 10g 10.1.2.3.0
@Bala
Colleagues of mine have imported a designer repository inside 11gR2 and where not able to change objects inside the repository. When they imported the same designer dump inside an 11gR1 database it worked fine.
In the other post (Re: 11G compatibility it is also written that there are some major bugs and those bugs will not be fixed. -
Generation of DDL similar to Oracle Designer (Data Modeler 3.0 EA1.)
Hi,
Will the production version of SQL Data Modeler allow the creation of separate DDL files similar to that which Oracle Designer does? For example, I can create a sequence number generator in Data Modeler (DM) and then make a call to that in an Object Type method. However the DDL file that is generated by DM has all DDL in one file. This would allow to take dependencies were taken into consideration, that is create the sequences before object types, packages and tables, then object type bodies, package bodies, etc...
Thanks,
ScottKAt this stage we do not support multiple files. We do plan to do this in the future. However you can work around this by repeating the DDL generation for the different objects types you want to have files for.
Remember that you can vote on the Exchange for your most desired features.
Sue -
Oracle Designer 6.0 rel. 2.1.2 hazy installation
I'm trying to install an oracle designer 6.0 rel 2.1.2.
I have installed oracle server 8.1.7 on WIN NT workstation
machine hp p700 128mb. The 8.1.7 server is installed without
java server because PARAMETER COMPATIBLE = 8.0.5, compatibility
with 8.0.5 oracle server, needed for designer 6.0 to work ( as
per docs ).
I install repository on server then start repository manager on
client and go create repository. The repository procedure starts
working then stops at this stage:
CKRAU20.EXE
STAGE DETAILS
CKPACK
OBJECT DETAILS
CIOUE_ELEMENT_TYPE
SUBMITTING DEFINITION/STATEMENT
CIUEET.OPB
There's no other way out than killing the process. The problem
is exactly the ciueet.opb sql package; executed standalone
against sqlplus, stops everything the same.
As anybody ever hear about something similar or can guess the
cause/workaround?
thank you, daffy duckDesigner versions prior to version 6.5.40 (aka Designer 6i
Release 2) will strike this problem when attempting to import or
install a repository on Oracle database version 8.1.7.
Patchset 7 for Designer 6.0 has a workaround included so that
Designer 6.0 can now avoid this problem.
regards,
David -
Oracle Designer 9.0.2.3.
Hello all,
I have Oracle Designer 9.0.2.3 installed with an Oracle 9i Database. My repository is created but whenever I eneter any of the Model System Requirements Tools and try to create a new container I get the following messages:
Message
ORA-01086: savepoint 'RM_DISPATCH' never established
Message
ORA-06512: at line 18
Message
ORA-06510: PL/SQL: unhandled user-defined exception
Message
RME-02124: Failed to execute SQL statement: declare
utility varchar2(3);
curr_el integer;
begin
savepoint rm_dispatch;
rmmes.clear;
curr_el := 0;
RMOACTIVITY.OPEN(:p1_el0,:p2_el0);
:errcnt := 0;
exception when others then
rmmes.get_error_state(utility,:excode);
rmmes.get_product(utility,:exprod);
:exutil := utility;
:errcnt := rmmes.getsize;
:sqlcod := SQLCODE;
:sqlmsg := SQLERRM;
:currel := curr_el;
rollback to savepoint rm_dispatch;
end;
Message
RME-00222: Failed to dispatch operation to Repository
Message
RME-00223: Failed to open new activity
I saw a similar individual have the same type of errors but they were running an older version of Designer. Any help would be appreciated.
ThanksThis problem occurs because Oracle9i import and export utilities are not
compatible with an Oracle 8.1.7 database. This not a bug but an
Oracle9i design feature.
Workaround:
To install Oracle SCM on an Oracle 8.1.7 database, you will first need to
install Oracle 8.1.7 import and export utilities in a separate Oracle
Home. The registry variables EXECUTE_IMPORT and EXECUTE_EXPORT need to be
changed to point to these 8.1.7 import and export
utilities instead of to the Oracle9i versions. These variables are found under
the key:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\REPOS61
Note that when installing the 8.1.7 import and export utilities, the following
error may be encountered:
There is no oracle.swd.jre 1.1.8.10
The workaround here is to use the Oracle Universal Installer installed onto
your hard disk with the Oracle9i install, to install the Oracle 8.1.7
components.
Hope this helps -
CDS-11025 Error: Oracle Designer generation error with PL/SQL package
Hi friends,
We tried to generate a database package from Oracle Designer (10.1.2.6) and getting "syntax errors" but the package has no syntax errors when we copy and paste the code and compile in TOAD (10.6)
Error from Designer:
Server Generator 10.1.2.6 (Build 10.1.2.11.12) , Wed Oct 17 10:58:43 2012
Copyright (c) Oracle Corporation 1995, 2010. All rights reserved.
CDS-11025 Error: The PL/SQL within PACKAGE BODY AVP_WATER_ANALYSIS_V has syntax errors - At token 'END', around:
...te_dist.VLV_INTL_ID;
END LOOP;
Processing Complete: 1 error(s), 0 warning(s)
code snippet from the Error message:
FOR rec_update_dist IN cur_update_dist (i_anlyd_intl_id,
i_iterd_intl_id,
i_phsed_intl_id,
i_wtrc_intl_id)
LOOP
UPDATE AVP_VALVE AvpValve
SET AvpValve.DIST_FROM_EDGE = rec_update_dist.DIST_FROM_EDGE
WHERE AvpValve.ANLYD_INTL_ID = rec_update_dist.ANLYD_INTL_ID
AND AvpValve.ITERD_INTL_ID = rec_update_dist.ITERD_INTL_ID
AND AvpValve.PHSED_INTL_ID = rec_update_dist.PHSED_INTL_ID
AND AvpValve.WTRC_INTL_ID = rec_update_dist.WTRC_INTL_ID
AND AvpValve.VLV_INTL_ID = rec_update_dist.VLV_INTL_ID;
END LOOP;
Thanks for any feedback,
JimFound the problem.
It was an issue with the CURSOR with the SELECT ... FROM (SELECT CASE WHEN THEN ELSE END). After swithing to the DECODE statement, Designer is able to generate the package.
CASE
WHEN ISOLATION_IND = 'Y' THEN
'A'
WHEN OPERATED_IND = 'Y' THEN
'B'
ELSE
'C'
END
decode(ISOLATION_IND,'Y','A',decode(OPERATED_IND,'Y','B','C'))
However, still strange to me that Designer doesn't like the CASE as part of SELECT.
Edited by: user476620 on Oct 18, 2012 8:13 PM -
Problem with Oracle Designer 10
Hi,
I have a problem with Oracle Designer 10 version 9.0.4.7 installed in Windows 2000 platform.
I don't know if the origin of the problem is at the server side or client side. I try to launch the repository reports but it doesn't work. The screen never appear. I have to finish the client process but the oracle session remmains:
SID SERIAL# LOGON_TIME PROGRAM
============================
36 13137 01-12-2008 des2k61.exe
38 15583 01-12-2008 ckrpt61.exe
The second line belongs to repository report process.
I have to kill Oracle session manually. Do you know if the problem is in the server side or client installation??
SGA VALUES
=============================
Total System Global Area 320302432 bytes
Fixed Size 736608 bytes
Variable Size 285212672 bytes
Database Buffers 33554432 bytes
Redo Buffers 798720 bytes
Client values
=============================
1Gb RAM
Windows 2000 SP4
3Gb Virtual Mem
2 GHz AMD
Thanks in advance.I have two homes for oracle developer ..
old ---- C:\*DevSuite*
new -- C:\>C:\*DevSuite_1*
I have executed the below statement .........
C:\>C:\*DevSuite_1*\bin\tnsping disd9i
TNS Ping Utility for 32-bit Windows: Version 10.1.0.4.2 - Production on 09-SEP-2
010 19:29:22
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\*DevSuite*\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(Host = VHRTY76.ASPNDT.NET)(Port = 1521))) (CONNECT_DATA = (SID = POU)))
OK (720 msec)
I think the new one is point to the old version 9 - sqlnet.ora and tnsnames.ora .
How to point the new one..?
Can I have two tns_admin as env variable ?
Edited by: user12045030 on Sep 9, 2010 7:12 AM -
Create a new user on Oracle Designer 6
I know this version is not supported anymore but the client still uses it.
I have to create a new repository user and it's done but the user doesn't have access to the different application systems. I get the error CDI-20540 and i can't find a way to give the user access.
This is what i did:
I've created the user in the database.
Next, I got into Maintain Users in Repository Admin utility and I insert a row for the user by selecting the oracle user I just recreated.
The user should now have access to designer repository and he he can connect but he has no access to any application system.
I go into Repository Object Navigator and I go to Application - Grant Access by Application.
I click on Add User but the repository user doesn't show up.
What am I missing?
Thanks!This has been a lot of years ago but I will try to
help
1. grant the user all of the required permissions by
SYS
connect, resource, create sequence, creat synonyn,
create table,
Then you will need to select the Maintain Users
button.
This will allow the user to connect to the reposity.
However they cannot see any of the application
except the ones they create.
age 2-28 of the instalation guide.
( I do not why I still have that manual here)
To view the other applications theyse must be granted
by the application owner.
Page 918 of the Oracle Designer Handbook shows the
Grant Access by User screen. needsto be set for you
to view the applications.Thanks for replying but my problem is when I got to Grant Access by User screen, I don't see the user i just created. (Oracle user exists and i can connect to the repository as newly created user).
That's kinda strange and i'm not sure what else i can try. -
Hi Friends,
I plan to learn Oracle Designer, Please help me to get Documentation(Pdf,.doc).
I searched lot in Google, but no use.
Regards,
KishoreI'm not surprised that Google didn't tell you much - Oracle Designer was never a really popular product, and now is slowly dying. Which makes me wonder why you want to learn Designer? Don't get me wrong, it's a great product, and I'm REALLY sorry that Oracle isn't developing it further. Still, I would suggest that SQL Developer Data Modeling, or the UML-based design tools built into JDeveloper are probably better long term choices for the newbie, even though they don't have much in the way of application generation capabilities.
As for documentation - when you install Designer you will get a good amount of documentation installed with it. Pay special attention to the Help files - these are really quite good IMHO. Beyond this, check out the Designer pages on OTN at http://www.oracle.com/technology/products/designer/index.html where you will find links to the Oracle documentation, and a few white papers and tutorials.
For third party sources, look at the book, Oracle Designer Handbook by Paul Dorsey and Peter Koletzke. This was written for Designer 2.1, but a lot of it is still valid for the current version. And EVERY Designer user should be a member of the Oracle Development Tools Users Group (ODTUG) - the Designer white papers on the ODTUG website, http://www.odtug.com/ will give you information that isn't in the official documentation. That is especially true if you'll be using the versioning capabilities of Designer. It's worth the price of membership, but if you can't afford that, you can become an associate member for free and get access to most of the papers. -
Heterogeneous system copy from MSSQL to Oracle
Dear Experts,
I have performed ABAP+JAVA system copy R3load based from Oracle to Oracle and MSSQL to MSSQL platform.
Homogeneous system copy many times.
But this is first time i am perfoming an Export from MSSQL source system with r3load Export method .....My Target system is havign Oracle 10.2.0.2 software installed along with installation prerequisites.
But while Importing the same MSSQL Export ...I am not getting any option for heterogeneous system copy.
I am running on ECC6.0 windows platform and i also have generated Migartion KEY.
But where should i put this key.
I have gone through system copy guide many times but unable to understand Exact options to follow to Migrate to Oracle target system. Appreciate if anyone can give me detail steps i need to carry on Target system
Best Regards,
AjitRMarkus,
Thanks for the help, i have done Export with mentioned way and this time DBSIZE.xml file got created under ORA directory ....i started installation at target system....It went smooth until phase Import java Dump Done. .....But during Post load activities It gave error...
When i tried connectivity to Oracle database it works fine and
R3trans -d gives below mentioned error....Looks like table does not exist....all ENV variables are also got set at target machine.....
Error as below
Now 'SAPSR3/<pwd>@TST' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 389 0.171885
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 23682 0.195567
4 ETW000 [dev trc ,00000] Database instance TST is running on CSSLDELL-3 with ORACLE version 10.2.0.2.0 since 20080522
4 ETW000 4056 0.199623
4 ETW000 [dev trc ,00000] Connection 0 opened (DBSL handle 0) 14523 0.214146
4 ETW000 [dblink ,01299] ***LOG BZA=>table SVERS does not exist on database [dblink#3 @ 1299]
4 ETW000 8145 0.222291
4 ETW000 [dev trc ,00000] NTAB: SELECT COMPCNT FROM DDNTT FAILED 1021 0.223312
4 ETW000 [dev trc ,00000] NTAB: SELECT VERSION FROM DDNTT FAILED 520 0.223832
4 ETW000 [dbntab.c ,00000] *** ERROR => NTAB: SELECT VERSION/DBASE FROM DDNTT FAILED
4 ETW000 505 0.224337
4 ETW000 [dbntab ,01273] ***LOG BZY=>unexpected return code 103 calling NTAB [dbntab#3 @ 12737]
Please help...Points rewarded anyways.....
Maybe you are looking for
-
How to install Adobe CC with elevated admin rights?
I am trying to install the trail version of Illustrator CC, but the install script comes back with the message "Installation Failed" Administrator priviedges are required to install. Please Install later." I can install programs on my computer, but i
-
Conversion cords for apple products from US to Ireland
what type of conversion cords do I need for an Iphone (U.S) in Ireland?
-
I just purchased a complete series on itunes... Im trying to watch the episodes but its only showing 20 seconds.. can some one help me know what Im doing wrong?
-
Hi All, I have observed one thing that when we restart J2ee engine, all file, jdbc and jms adapters auto start however SOAP adapter needs a manual start in RWB. Could someone put some light on this, and is there a way that the adapter auto s
-
Not detected: Creative X-Fi Titanium Fatal1ty Champion and Windows 7
Hi! i have a strange problem: my Creative X-Fi Titanium Fatalty Champion Soundcard is not detected when I want to upgrade or download PowerDVD. It shows up in the devices list as "SB X-FI" though - but this seems to be the incorrect name!?!?! Also I