Copied midi files won't play

Hey, I am new to this forum and I'm hoping someone can help me.
I opened up an old file that I created in Logic 5, and tried to copy some events from the session into a new Logic 8 window. The events appear grayed out (with their original colors around the edge), and with a small circle in the top left corner. It now won't play. I can still see the score/matrix, etc, but no signal is coming out, despite what instrument I select.
I took a screen grab of what I mean, and put it here.
http://i942.photobucket.com/albums/ad266/logicmidiproblem/picture.jpg
Hope you can help me get the sounds back!

K, that sounds simple! This may sound dumb... but how do i do that? Like in the pic I grabbed, the mute button isn't selected/highlighted.

Similar Messages

MIDI regions won't play back in Logic X

Suddenly my MIDI regions won't play back. I can hear the notes when when I play on my MIDI controller and when I mark the MIDI notes in the piano roll, but not when play it back in the arrange window. This worked fine the last time I opened the project.
- I have done a restart of all my equipment, computer and Logic.
- Nothing is muted - not the track or the regions.
- The MIDI in/out in the piano roll is ON.
- The channel strip setting is set to ON.
- This applies to all instruments.
- It works as usual for MIDI written using the pen tool, but not for MIDI played on the keyboard.
- MIDI channel are set to 1 (as seen in the event window).
- Instrument channel is set to "all".
Logic X 10.0.2
OSX 10.8.4
iMac early 2009
2.66 GHz Intel Core Duo
4 GB ram
SATA disc
M-Audio Fast Track Pro, with M-Audio Radium 49.
Does anyone know what could be wrong? Any help is appreciated.
Thanks!

See if this is the problem.
Is this an imported Logic 9 project file?
Check the track Inspector settings and see if you have any over the top values for some of the settings (like Delay)

After a itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this?

I have two anserws I think might work for you. The first one is: This solved the issue down loading and re-installing Quicktime 7.5.5
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
I'd create a backup of the System / Components and Quicktime folders first though, just incase you need to revert back.
and the 2nd one is:
I HAVE A FIX...AND IT WORKS!!!!!!!!! Actually a friend found this fix somewhere else, but I just did it and it worked. The only rub is you need to have access to another system that has not been updated to iTunes 10.5 or QT 7.7.
On the system that has not been updated, go to:
MAC HD/System/Library/Components and copy that folder to an external drive...next go to
MAC HD/System/Library/QuickTime and copy that folder to an external drive.
On the system that is not working, go to the same places on the MAC HD and delete those two folders. Then copy the folders from your external drive to the same location. Restart you system...i did it twice...and everything should be back to normal. This has worked on both systems here that were previously jacked up. If you do not have access to a system that was not messed up, let me know and maybe we can swap files.
I havent tried any of these yet because I'm in the middle of a project and I dont wnat anything to go wrong right now. After I'm done I will be sure to get started on one of these.
If you try any one of these let me know how it works out.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate. When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet) in full screen mode just fine. When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing. I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse. Does anybody have an answer or a work-around for me?

Hi Watch this video,
If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

MP4 files won't play in mobile browser?

I have a media file, MP4, which plays fine on desktop browsers. But on the iPhone4 and on Android 2.2 mobile devices this media file won't play within the browser. I get a broken link where the embedded video should be playing. I am using proper object/embed tags per a previous successful attempt I made doing this and I cross referenced my classid to one that was posted online to make sure I didn't miss any syntax. What could be going wrong? Did I encode the mp4 incorrectly? If so, then why does a 3gp file that I rendered FROM the broken mp4 play within the mobile devices without a hitch?
Sincerely,
markerline

Are you sure you have Photoshop Elements 8 and not Photoshop Premier elements 8? I would have thought that MP4 files can be played in Premier elements (PE) rather than Photoshop elements (PSE). PSE is for photos and PE is for movies and videos.
Perhaps you could try installing the trial version of PE13 to see if anything changes. I am not into movies and all that so my answer is just a guess work.

HD movie and tv show files won't play in iTunes 10.6.3.

Just did a fresh install of Mountain Lion and for some reason now HD movie and tv show files won't play. I get a black screen.
Standard Def tv shows and movies are still playing fine though.
Oh and yes I already tried switching it to 32-bit mode via the "Get Info" screen. Same problem results.
Any suggestions?

I think I have the same problem. Every time I play some HD movies in iTunes the movie seems to be stuck and the screen black. If I scrub the movie forward I can see the picture, even captions, but I can't play them. I said some because there are certain movies that DO play. I mean HD ones, SD video plays fine. But I couldn't find any clue. It's not a matter of file size, neither a matter of resolution, compressio... I'll wait for an update (system and/or iTunes) and if nothing happens I think I'll dig a little more. This is no big issue for me since they ALL seem to play perfectly when I select AirPlay to my Apple TV.
I'll try checking tags

.3g2 files won't play in any media player

Hello.
Ever since we updated to OS X Mavericks, any old .3g2 files won't play in any media player on our iMac. When we go to play them, they play button in QuickTime just flashes from pause to play and then back to pause and and nothing happens. I'm not sure if this file type is becoming outdated and therefore is not compatible with the new OS X, but I am just curious if anyone knows if there is a way to fix this.
Thanks.

Did you try VLC?

Music files won't play in windows media player.

My music files won't play in windows media player. all of them have .wpl as the file name extention. Could that be the reason they will not play? Help!

Hi
Please find the link given below please run the Microsoft fix it. Also second might help you as well to resolve your issue.
Information about the Multimedia file types that Windows Media Player supports
Troubleshoot
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Wav files won't play in Firefox 22

Wav files won't play in Firefox 22. Previous versions of Firefox are fine. Other sound is fine. I have the latest mac OS X. Quicktime is set to play wav files. I have the latest version of it.
Is there a fix for this?
Is there any other plugins I can install which will play the wav files?

Thank you for your response Alice.
I checked about:plugins and I DO have audio/wav and audio/x-wav. It it QuickTime 7.7.1 I have.
In Firefox Preferences Applications Panel I do not seem to have the iTunes.Document audio/x-wav there, only the audio/wav and Waveform Audio.
Re the New Email Notification feature with my Webmail, this is not activated via a Firefox extension. I don't really know how it works but when I'm logged into my Webmail email account and a new email arrives, a wav sound is played to alert me of the new email. This has always happened with all previous versions of Firefox, just not since I updated to Firefox 22 but when I go back to Firefox 21, it works again.
I have previously asked about this with my Webmail company. They knew nothing of this problem. I have now asked them for a second time now that I know that it is only THEIR wav sound that won't play. Other wav files play OK with Firefox 22.
I do not know what is at fault - Firefox 22, QuickTime or the Webmail site but for the past few days I have frequently switched between Firefox 22 and Firefox 21. Each time the New Email Notification wav sound works with Firefox 21 and doesn't with Firefox 22 so that makes me suspect that somehow Firefox 22 is at fault.
But it is a mystery and I might be stuck with it - unless it disappears as mysteriously as it arrived with a newer version of Firefox or maybe even a newer version of Quicktime.
Thank you to everybody who has tried to help me.

After an itunes update my HDV mov files won't play on my mac.

I applied and update to my MacBook pro and BAM!! Now my HDV.mov files won't play with QuickTime or final cut pro. I'm in the middle of a project and I can't finish it because when the files play in fcp I get a error. Can anybody help me with this.

Take a look at this thread...
https://discussions.apple.com/thread/3385122

IMovie Audio Files Won't Play when the File is Moved

I imported a lot of audio files into iMovie from my desktop and I set them out how I wanted them in my project. But as my desktop was getting too cluttered, I had to move the audio files into a different folder in my documents, but now the audio files won't play and a warning icon is on each audio clip. Is there a simple way to relocate the files, without moving the files back to my desktop and without having to set out my all my audio files all over again?

Besides the two files you mentioned in your post, you also need to upload YOUR .swf as well. Then you need to upload your music file/folder.
Also double check that the path to your mp3 is correct RELATIVE to the location of the Web page that you placed the .swf on, NOT the physical location of the .swf.
var req:URLRequest = new URLRequest("../Sound/dreamsSound1.mp3");
This needs to be the path from the WEB PAGE to the mp3, NOT the path from the physical location of the .swf.
Once you have the pathing correct, it should NOT work when testing in Flash CS4, because the path to the mp3 needs to be RELATIVE to the Web page.
Best wishes and Good Luck!
Adninjastrator

Local files won't play on Windows 10

All of my local files won't play in spotify in windows 10, please help....

Hello:
How did you encode the music files? If you used iTunes to rip the music with make sure you have Apple Quicktime player installed and/or check for an update for Quicktime player. Does you music files play in any other music player? Also try to uncheck all music sources log out of the Spotify desktop app and log back into the Spotify desktop app, add music sources back again into the Spotify desktop app and see if local music files play now.
What Spotify desktop app version are you running?

Premiere pro/audition bug? Mixdown file won't play in sequence

Howdy.
Never had this happen before, so I thought I'd ask you academic types what's going on.
I created a sequence in PP that contained multiple audio (wav)/video files. I exported the audio to Audition, balanced the amplification, declicked, popped, etc. Created a mixdown of the files and exported (wav). I imported the mixdown to PP and placed it into the sequence (I've done this thousands of times before). Unfortunately, there were no waveforms on the file and no audio can be heard.
However, if I open the same file in the source monitor the waveforms are there and the file plays as it should. I can also open and play the wav file in media play, for example, and everything appears to be fine.
Any ideas on why it won't play in the program monitor/timeline/sequence?
Thanks

Oh well, not a big deal. I was able to use the clip by creating a new sequence, dragging from source monitor to new sequence, then copy/paste from the new sequence to the sequence I needed.

File won't play in Win only (Error 2048)

Hi,
I've read through lots of the posts regarding 2048 and haven't found a solution.
A QT movie was prepared for me and delivered to me on a DVD. I'm currently running WinXP SP2 with QT 7.1.3. Here are the things that will and won't work:
1. Try to play the .mov file on the DVD; Win QT gives me error 2048.
2. Drag the .mov file to my desktop; error 2048.
3. Drag the .mov from my desktop to my flash drive and take it to a Mac -- now Mac QT won't play it.
4. Put the DVD in a Mac -- the file plays fine.
5. On a Mac, copy the file to my flash drive -- the Mac will play it fine from my flash drive.
Looking at 3-5, what grabs me is not just that Mac will play the file and Win won't, but that if the file just passes through my PC, then Mac won't play it either. This almost sounds like one of the old data fork/resource fork problems that used to plague Mac/PC compatibility, except that we shouldn't be seeing that anymore.
I have tried this with 2 different machines running Windows, so I know it's not just my machine.
Any suggestions would be appreciated.
Thanks,
Aaron.

Open the file (on a Mac) using QuickTime and open the Movie Info window. Report back what codecs and formats are in the file.
The (-2048) error message usually means the format is MPEG-2 and it requires the QuickTime PMEG-2 Playback Component to view.
You could also try installing the free VLC app (Windows version) to play the file.

Presenter 9 after I publish the file won't play on my computer

Hi,
Quick version- presenter 9 won't play a published file. It starts the viewer, but the green circle just spins.
Details-
brand new computer, fresh download of presenter 9 today.
Win 8.1
office 2013
Firefox browser
FIle created in Presenter 7 on aother computer, copied into a new computer (along with all the resource and data and so files).
it's long, about 45 min
I am able to preveiw the entire thing- audio works, embedded shockwave demos created in captivate work. It just won't play in the browser. I've tried both 'view output when complete' when I'm publising it, and just manuallly clicking on the index file after it's published. neither works. I also tried using explorer but that was worse- it leaves a white screen without even loading the viewer.
just to test I made a new presentation with only a couple slides and no audio. that will publish and play in the browser properly.
I have the latest flash and shockwave.
It seems like it should work since it previews fine.
any ideas??
thanks!

Hi Sunil-
I watched the global settings video and added my C: drive and also the entire 'my adobe presentations' and the indivisual file for this presentation to the allow list. It didn't help. is there something else I need to do on the flash settings other than this 'allow' list? (picture below).
The other option you mentioned was transfering using a package. my old computer has Presenter 7. I don't see in that version of presneter an option to create a package. I can try that if you can tell me how to do that.
finally, if i would need to share a file with you how would I do that? it's a 24000 KB file.
thanks for the help!

Copied midi files won't play

Similar Messages

Maybe you are looking for