Copied query not changeable when "Changeable Original" setting used.

Hi
We are letting users create queries in Production. All the authorisations are working as designed. We have settings for query elements set to "Changeable Original" in the object changeability.
When a user creates a new query they can save it, change it, save copies, all as required. The expectation is that they would be able to copy a query that originated in another system but was transported and save it under a new technical name and change it. This is not possible. It is as though the system thinks that the copy originated in the other system and as such cannot be changed.
If we change the query elements to "Changeable Everything" it all works but we do not want this setting for obvious reasons.
Has anyone come accross this? Can anyone suggest a way to fix this issue?
Thanks
Gareth

Hi Chetan, VNK
Thanks for your replies...
We have made the decision to allow query developement to a limited user community in Production. This has it's own name space different from the name space used for the transported queries. There are many reasons for this approach which i won't go into (unless you want me to...)!
The users do have the correct access to create in production. They are able to create and change new reports within their namespace within their InfoArea and all that is working fine. I would expect that opening and existing query in production and saving a copy in their namespace, that the new query should be changeable. Would you not expect this? You are correct, i do not want them to be able to change queries that originated in the development environment but the name space control combined with the changeable original setting in object changeability should control this.
The error i get is not a transport error...it is a system changeability error suggesting that the system thinks the new query was not created in production.
Any further ideas?
Thanks
Gareth

Similar Messages

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turn

I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turned on off iPad and iPhone but neither will set up, I have given up and forwarded all new emails from hotmail to icloud until I sort this out. Please help it's doing my brain in!!!! Thanks

You need to turn off find my ipad in settings
Then restore to factory settings ipad will then be
as new then enter you Apple ID and password
bsydd uk

[svn] 3652: Fix for SDK-17328 - Package description missing when they' re set using Overviews_Base.xml

Revision: 3652
Author: [email protected]
Date: 2008-10-15 10:18:08 -0700 (Wed, 15 Oct 2008)
Log Message:
Fix for SDK-17328 - Package description missing when they're set using Overviews_Base.xml
Fix for SDK-17185 - Allow HTML chars to be set for footer string
Fix for SDK-17259 - Exception name missing when generating asdoc with @throw tag
QA: Yes
Doc: No
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17328
http://bugs.adobe.com/jira/browse/SDK-17185
http://bugs.adobe.com/jira/browse/SDK-17259
Modified Paths:
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/asdoc/templates/package-detail.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

I believe I have found my solution!
I can currently boot with my bios in ide mode- but my raid1 mirror is showing as independent drives (c and d)
I do a simple windows search for winload.exe on the C: drive and get nothing
that same search on the D: turns up winload.exe all over
When I look at I my BCD 'device partation=C:'
shouldnt this be D:?
If so is this just a simple bcdedit, reboot into the bios, change my bios from IDE mode to RAID mode, save to cmos then, theoretically boot into windows with my raid correct (showing as a singe drive C: )
Please someone correct me if I am wrong
C:\>bcdedit
Windows Boot Manager
identifier              {bootmgr}
device                  partition=C:
description             Windows Boot Manager
locale                  en-US
inherit                 {globalsettings}
default                 {current}
resumeobject            {8b18c20b-c12d-11db-afc2-ac36bbabc8b2}
displayorder            {current}
toolsdisplayorder       {memdiag}
timeout                 30
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.exe
description             Microsoft Windows Vista
locale                  en-US
inherit                 {bootloadersettings}
osdevice                partition=C:
systemroot              \Windows
resumeobject            {8b18c20b-c12d-11db-afc2-ac36bbabc8b2}
nx                      OptIn
vga                     No
quietboot               Yes

QBE style(Find-Execute) Query not executing when VO has bind parameter

I have an Entity Based ViewObject that is composed of 3 Entities so the entities are related through an Assoc. Then the ViewObject also has a bind paremeter defined and used in the WHERE clause.
In my page everything is fine until when I use/click on the Find operation on the JSF page. When the Find operation is executed the page/form goes blank so I can enter by QBE query. Now when I Execute my search by executing the ExecuteWith params operation. Nothing is happening to the screen, it seems that query was not executed. Although there was no errors or exceptions displayed.
However if I remove the bind parameter, and execute the Execute operation instead after going to Find mode, the query is executed properly and I get expected results.
My problem is a bit general, but are there anyone who had a similar problem like this? Im still in the process of creating a test case.
regards,
Anton

Hi Frank,
But the "ExecuteWithParams" operation provides the bind variable right? (i had the value hardcoded on the pagedef). So it must have supplied a value. I also noticed that this is happening only when if the VIewObject contains two or more Entities. If the Viewobject has only 1 entity, the ViewObject queries properly.
Anyway Frank, I had found a fix for this. I set an InvokeAction on the pagedef that binds to the ExecuteWithParams that is invoked during page load only(!postback condition). and then I just use the Find-Execute operations instead of the Find-ExecuteWithParams operations that I used previously.
I will try to replicate the issue again to investigate what's really going on. I just want to know if its a bug or just an expected behavior or i just made a mistake.
regards,
Anton

HT204053 I have another Apple ID from when I originally set up this iPod, now I can't reset it as I am also set up with Find My iPhone which may have been doen by mistake I have been in contact with Apple itself and they can't fix the problem so far

i have originally forgotten my pass code for a new iPod Touch, now I have with Apple's help reset it to factory, my issue is due to the change in my Apple ID , the iPod will not let me set it up under the new Id or the old one.I also have been set up with find my iPhone and I don't remember if I did this or not, could have been the grand children trying to help out. Any ideas or suggestions, I haven't even used this yet and I have owned it for 6months already. Really am disappointed that the process is so difficult to navigate.

I have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

Flash is not visible when transparent is set to true

Hi everyone. I'm writing an application in HTML and
Javascript which uses <OBJECT> and <EMBED> to display a
flash. The flash is invisible when transparent = false in the
application settings xml file.
I used the following to HTML code to display the flash:
quote:
<p width="100%" align="center"><embed pluginspage="
http://www.adobe.com/go/getflashplayer"
src="
http://www.yourminis.com/Dir/GetContainer.api?uri=yourminis/yourminis/mini:youtube"
wmode="transparent" width="370" height="280"
FlashVars="height=270&xheight=280&xwidth=370&width=360&uri=yourminis%2Fyourminis%2Fmini%3 Ayoutube&swfurl=%2Fwidget%5Fyoutube%2Eswf&"
type="application/x-shockwave-flash"
allowScriptAccess="always"></embed><br /></p>
This is a flash file that is designed to run on a domain
other than where the flash file is hosted on. More information on
the flash at
http://www.yourminis.com/minis/yourminis/yourminis/mini:youtube
So the question is... how do I display a flash file when
transparent is set to true?
OS: Windows XP
CPU: Intel Centrino Pro

This means that the SWF is written so that it only works when
embedded in a web page. When you add the SWF to the stage as a
stand-alone display object using addChild() it is not being hosted
in the web page.
You have 2 options:
1. Modify the SWF code (if possible) to remove the
ExternalInterface requirement. You can write code in your AIR
application javascript to subscribe directly to events from the SWF
using addListener() and call functions directly on the SWF object
(Flash/Actionscript is not my primary development environment... so
if I have gotten the terminology wrong I apologize, but I HAVE
written a flash application that worked as I describe). My SWF
actually works embedded in HTML or not using the code "if
(ExternalInterface.available) {
ExternalInterface.addCallback("setIsPlaying", setIsPlaying ); }"
2) Somehow add a HTMLLoader in a new child window (with
transparent = false) to the stage as a new child. I have not yet
figured out exactly how to do this, so If anyone can provide
information on how to do this, I too would be appreciative.

PDF loaded using ActiveX will not load when the executable is used on another computer

Hello,
I am fairly new to Labveiw and have created a CAN diagnostic tool which uses an ActiveX control to display the CAN Spec PDF on the front panel. This works absolutely fine and still works fine when I create and use an executable on the same computer. However, I need to use the application on multiple computers that do not have Labview installed, and therefore require the executable. I have tried placing a copy of the PDF in the "Volume" folder and recreating the .exe with that path, then placing it in the same location on another computer, but no luck. I am fairly certain it has to do with the static file path, set in the Main VI, since it refers to a static location that does not necessarily exist on the next computer. I need some way to get around this though, so that I can easily transfer the application from one computer to another. The code I am using is very simple; I just open Adobe Reader and the file during initialization then close the reference path (see attached picture). Any Ideas?
Thank you for your assistance!
-Mike
Attachments:
ActiveX_pdf_code.jpg ‏23 KB

A solution that I have found to work well is to use the Project Directory node as a root path. In the development environment this node will always return the path to the directory containing the project that is calling it. In an executable, it returns the path to where the executable is located.
With that known starting point, I can put files like that pdf in either the same directory as the project/executable or a subdirectory of that location and I can always find it.
When creating a build spec you can include non-LV files and specify destinations for them. Likewise, the installer will then put these files where they belong during the installation.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

4.0 webservice does not work when Address Cleanse is used

Hello,
For my real time web service, I am unable to add any address cleansing transforms and make it work. The web service works fine as long as I do not add any address cleanse transform.
As soon as I add any address cleanse transform and try to start the service, the real time services list icon would turn yellow for more than 10 mins with the status stuck as "Service Starting"
The code in designer complies fine. The address cleanse transform works fine with batch jobs. Web services without address cleanse transforms work fine. Am not sure what the problem might be.
It'd be great if you could give some pointers on how to resolve it.
Thanks for looking.
Regards
T.

Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary

Automatic hierarchie aggregation not working when dimension formula is used

Hey folks,
i'm facing the following issue. currently i'm setting up an application to plan sales quantities, prices and manufacturing costs.
subsequently i want to calculate following values for members of account dimension:
- turnover (price * sales)
      -> implemented as dimension formula
      -> in the account hierarchie it's a child of net revenue
      -> account type: inc
      => calculation work fine in the reports
- manufacturing cost (manufacturing cost * sales)
      -> implemented as dimension formula
      -> in the account hierarchie it's a child of net revenue
      -> account type: exp
      => calculation work fine in the reports
- net revenue (turnover - manufacturing cost)
      -> in the account hierarchie it's the parent of turnover, manufacturing cost
      -> account type: inc
      => key figure is empty !!
As far as i understood BPC is aggregating automatically along the hierarchie. That means to me that net revenue should be automatically calculated due to the hierarchical relation in account dimension.
Did anyone ever face same issue ? probably the hierachical aggregation is not working when key figures based on dimension formula is used !? Do i really have to implement script logic to solve this issue ?
Looking forward to interesting approaches to solve this issue !
Best regards,
Moritz

Hey,
sorry my description was misleading at this point. i don't have a formula define for net revenue dimension member. i expected the system to automatically calculate it by aggregation along the account dimension hierarchy where net revenue is parent to the turnover and manufacturing costs which are calculated by dimension formula.
Best regards,
Moritz

Call to second number not ringing when first is in use - Z3 Dual

Hiall,
I've only had my Z3 dual for a few days, but have discovered a couple of problems which has me stumped.
If I am on an active call and someone rings my other sim number (and it doesn't matter what way round this is), then the second caller does not get ringing, just silence until the call diverts to voicemail..which is very disconcerting for the caller, as they think the call has dropped.
Youtube videos of the dual sim working showed the second caller hearing ringing before the call went to voicemail, even though the call did not appear on the handset.
Additionally, when I am on a call, the inactive SIM signal meter changes to show an hourglass!! Didn't see that mentioned anywhere either!
One other thing, if I enable the Dual Sim Reachability feature, then not only do I not see the appropriate origination (which I expected), but the calls seem to go to the wrong voicemails as well!
e.g. Sim 1 active
Call to Sim 2
Sim 1 active call notified of waiting call
Sim 2 call diverts to Sim 1 voicemail on no answer!!
Seems a bit counter intuitive, as I would have expected the call to be pulled back and diverted to the SIM 2 voicemail when not answered.
Anyone got any thoughts on either of these two issues?

http://en.wikipedia.org/wiki/Dual_SIM
You should check it out with your network.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Smart View Ribbon not shown when Excel is invoked using VBA

Dear Hyperion Gurus,
I am in need to invoke smartview refresh by calling excel using VBA from an excel module in another sheet(master template). But when I invloke Excel using VBA, smartview ribbon does not get activated, due to which the HypConnect, HypVMenuRefresh command does not work. If I directly open excel and run the module it connects fine and does the refresh without any problem. I have tried to enable and disable smartview using VBA but it does not work either. If I call excel directly using a batch using Call command, then it works fine, however the batch file does not close as if I use ThisWorkbook.Close command, then it does not completely close Excel, the instance still runs, and if I try to close using Application.Quit, then it closes down Excel completely. Any help would be highly appreciated.
Thanks and Regards,
SiddN.

Hi,
I was able to achieve this using batch files by calling the excel templates one by one.
Thanks,
SiddN.

Code insight is not available when eding jsp by using 10.1.3.36.73

I use 10.1.3.36.73 jdeveloper on windows to develop web application,
but code insight is easy not available when editing jsp 2.0.
I must restart jdeveloper and it still isn't often available.
ex. in jsp
ArrayList al = new ArrayList();
for (Iterator it=al.
Code insight is not supported for jsp or this is bug?

Do you still have any code error in your jdev editor? no matter the error is JSP or HTML (it is signed by little red box at the right of the window near scroll bar), code insight sometimes is not available.

When is a valid query not valid when made into a subquery?

I have a query that works great, but when I wrap a "select * from ( [insert regular query here] ) t_inline_view;" around it, it fails with an error of "ORA-02016: cannot use a subquery in a START WITH on a remote database".
For details of my problem, please refer to this other thread:
Receiving ORA-02016 error in ApEx, but not TOAD or SQL Workshop
My main query, which performs well and works like a charm, contains remote database links, a hierarchy query "start with ... connect by ....", and some unions. The original query is in the previous thread for you to review if you like.
I am simply asking what syntax/method/etc. is being used in my query that is causing it to break as a subquery, but work as a regular query? If it's easier to just give me a link to some documentation describing all the things that will cause a query to not be a valid subquery, that is fine with me.
Shane.

What is it you want to know not contained in the
error message text?You're kidding me, right? The real weird problem is that my query already has a "start with .... connect by ...." in a subquery against a remote database. If I took the error at face value, I would expect to get that error even when running my query as a stand alone query. It doesn't error until the entire thing is a subquery. I'm just trying to understand what's wrong with my query and why it seems to error when it shouldn't and why it doesn't error when it seems like it should.
If that doesn't help be sure when you post here to
include full version information.The database running the query is 9.2.0.4 and remote database where all of the objects are stored is a 9.2.0.8 database.
The docs on "START WITH" can be found at
http://tahiti.oracle.com.
Thanks. I checked the 9iR2 documentation and found this. I am familiar with what it means by a "scalar subquery expression." The link I found is http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_103a.htm#2075989. I found the "START WITH Clause" section by doing a "find" when the page loaded.
Shane.

Ie9 flash object not showing when wmode is set

I'm searching and searching but do not find any solution for this.
We're having a flex web application that is working fine until now. We're using until recently the google maps flash api, unfortunately this is already deprecated and will disappear completely in september 2014. Therefor we moved the whole integration to the js v3 api, which is working fine. The whole thing is an overlay over the application, since everything is moved to js, I added the property wmode to the object in html and set it to opaque in order to be able to layer everything. It's working fine for most people, but some (including my boss) are seeing a blank screen. Seems that nothing happens (although the swf loads), and I can not figure out why. Same browser (ie 9 or 10), same flash player version (11.6.xxx). Browser cache cleared, flash player cache cleared...
Somebody having a clue? Removing the wmode-property solves the issue, but then I'm not be able to get my map on top of the application.
The swf is definetly loading since I see calls made to the server in order to login etc. It's also not a flash player issue. The swf-file is directly accessable and rendering if done so.
Thanks
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">

<head>
    <title>${title}</title>
    <meta name="google" value="notranslate" />
    <meta http-equiv="X-UA-Compatible" content="IE=10; IE=9;"/>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    
    <style type="text/css" media="screen">
        html, body { height:100%; }
        body { margin:0; padding:0; overflow:hidden; text-align:center;
               background-color: ${bgcolor}; }
        object:focus { outline:none; }
        #flashContent { display:none;}
    </style>
    
    
    
    <script src="PlusOptixSync.js" language="javascript"></script>
    
     <script language="javascript">
        function getEIDxml()
          var strXML = document.MirageApplet.readCardAsXMLString() + " ";
          return strXML;
        function setOuterSize()
            var nomWidth = 1280;
            var nomHeight = 800; // 786 viewable in fullscreen
            var actWidth = nomWidth;
            var actHeight = nomHeight + 150 - 30; // fullscreen change coeff (ruimte die we winnen door f11) - taakbalk
            window.resizeTo(actWidth, actHeight);
            //window.outerWidth = actWidth;
            //window.outerHeight = actHeight;
            //script die de F1 help functionaliteit van de browser afzet. Dit is nodig omdat IE de F1 functionaliteit van de flex applicatie onderdrukt
            document.onhelp=new Function("return false");
            window.onhelp=new Function("return false");
    </script>
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
        // For version detection, set to min. required Flash Player version, or 0 (or 0.0.0), for no version detection.
        var swfVersionStr = "${version_major}.${version_minor}.${version_revision}";
        // To use express install, set to playerProductInstall.swf, otherwise the empty string.
        var xiSwfUrlStr = "${expressInstallSwf}";
        var flashvars = {};
        var params = {};
        params.quality = "high";
        params.bgcolor = "${bgcolor}";
        params.allowscriptaccess = "sameDomain";
        params.allowfullscreen = "true";
        params.wmode = "transparent";
        var attributes = {};
        attributes.id = "${application}";
        attributes.name = "${application}";
        attributes.align = "middle";
        swfobject.embedSWF(
            "${swf}.swf", "flashContent",
            "${width}", "${height}",
            swfVersionStr, xiSwfUrlStr,
            flashvars, params, attributes);
        // JavaScript enabled so display the flashContent div in case it is not replaced with a swf object.
        swfobject.createCSS("#flashContent", "display:block;text-align:left;");
    </script>
      
      <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/2.0.0/jquery.min.js"></script>
      <script src="http://code.highcharts.com/highcharts.js"></script>
      <script src="http://code.highcharts.com/modules/exporting.js"></script>
      <script type="text/javascript" src="../js/util/Namespace.js"></script>
      <script type="text/javascript" src="../js/util/mirage-services.js"></script>
      <script type="text/javascript" src="../js/util/mirage-binding-utils.js"></script>
      <script type="text/javascript" src="../js/util/mirage-event-dispatcher.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-constants.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-theme.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-config.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-factory.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-zoomer.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-formatter.js"></script>
      <script type="text/javascript" src="../js/util/groeicurven-highcharts-prototype.js"></script>
      <script type="text/javascript" src="../js/groeicurven-events.js"></script>
      <script type="text/javascript" src="../js/groeicurven-controller.js"></script>
      <script type="text/javascript" src="../js/groeicurven-flex-bridge.js"></script>
      <script language="javascript">
            initGroeicurvenFlexBridge("${application}");
      </script>
    
    <link rel="stylesheet" href="../css/google-maps.css">
    <script src="http://maps.googleapis.com/maps/api/js?sensor=false"></script>
    <script type="text/javascript" src="http://google-maps-utility-library-v3.googlecode.com/svn/trunk/styledmarker/src/StyledMarker.js"></script>
    <script type="text/javascript" src="../js/util/cvi_busy_lib.js"></script>
    <script type="text/javascript" src="../js/google-maps-events.js"></script>
    <script type="text/javascript" src="../js/google-maps-controller.js"></script>
    <script type="text/javascript" src="../js/google-maps-mediator.js"></script>
    <script language="javascript">
        function openMaps(data)
            document.getElementById('mapsContent').style.visibility ="visible";
            document.getElementById('optionsList').style.visibility ="visible";
            document.getElementById('activeCheckboxDiv').style.visibility ="visible";
            document.getElementById('mapsContent').style.zIndex = 100;
            onLoadHandler(data);
        function adresFoundHandler(marker, filtereEnabled){
            document.getElementById('mapsContent').style.visibility ="hidden";
            document.getElementById('optionsList').style.visibility ="hidden";
            document.getElementById('activeCheckboxDiv').style.visibility ="hidden";
            document.getElementById('activeCheckbox').style.visibility ="hidden";
            document.getElementById('mapsContent').style.zIndex = 0;
            clearLocations();
            ${application}.responseGoogleMaps(marker, filtereEnabled);
    </script>
    
</head>
<body scroll="no" onLoad="setOuterSize();">
    
    <div id="flashContent">
        <p>
            To view this page ensure that Adobe Flash Player version
            ${version_major}.${version_minor}.${version_revision} or greater is installed.
        </p>
        <script type="text/javascript">
            document.write("<a href='http://www.adobe.com/go/getflashplayer'><img src='get_flash_player.gif' alt='Get Adobe Flash player' /></a>" );
        </script>
    </div>
    <noscript>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="${width}" height="${height}" id="${application}">
            <param name="movie" value="${swf}.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="${bgcolor}" />
            <param name="allowScriptAccess" value="sameDomain" />
            <param name="allowFullScreen" value="true" />
            <param name="wmode" value="transparent" />
            
            <object type="application/x-shockwave-flash" data="${swf}.swf" width="${width}" height="${height}">
                <param name="quality" value="high" />
                <param name="bgcolor" value="${bgcolor}" />
                <param name="allowScriptAccess" value="sameDomain" />
                <param name="allowFullScreen" value="true" />
            
            
                <p>
                    Either scripts and active content are not permitted to run or Adobe Flash Player version
                    ${version_major}.${version_minor}.${version_revision} or greater is not installed.
                </p>
            
                <a href="http://www.adobe.com/go/getflashplayer">
                    <img src="get_flash_player.gif" alt="Get Adobe Flash Player" />
                </a>
            
            </object>
            
        </object>
    </noscript>
    <noscript>Your browser does not support JavaScript!</noscript>
    <applet
      id ="MirageApplet"
      codebase = "AppletLibs"
      archive = "kg-eid-tools-2.6.jar,beidlib-1.1.jar,jdom-1.0.jar,joda-time-1.6.jar,commons-lang-2.4.jar"
      code     = "be.kg.mirage.MirageApplet.class"
      name     = "MirageApplet"
      hspace   = "0"
      vspace   = "0"
      style="width: 0px; height: 0px;">
        <param name="Reader" value="">
        <param name="OCSP" value="0">
        <param name="CRL" value="0">
        <param name="DisableWarning" value="true">
    </applet>
    <div id ="mapsContent">
        <h3 id="typeLabel">Google Maps</h3>
        <select id="optionsList"></select>
        <input id="searchInput" type="text"></input>
        <div id="activeCheckboxDiv">
            <input id="activeCheckbox" type="checkbox"></input>
            <label for="activeCheckbox">Toon enkel actieve locaties</label>
        </div>
        <button id="searchButton" type="button" class="secondElementButton">Zoeken</button>
        <button id="annuleerButton" type="button" class="annuleerButton">Annuleer</button>
        <ul id="locations" class="thirdElement"></ul>
        <div id="canvasMap"></div>
    </div>

This means that the SWF is written so that it only works when
embedded in a web page. When you add the SWF to the stage as a
stand-alone display object using addChild() it is not being hosted
in the web page.
You have 2 options:
1. Modify the SWF code (if possible) to remove the
ExternalInterface requirement. You can write code in your AIR
application javascript to subscribe directly to events from the SWF
using addListener() and call functions directly on the SWF object
(Flash/Actionscript is not my primary development environment... so
if I have gotten the terminology wrong I apologize, but I HAVE
written a flash application that worked as I describe). My SWF
actually works embedded in HTML or not using the code "if
(ExternalInterface.available) {
ExternalInterface.addCallback("setIsPlaying", setIsPlaying ); }"
2) Somehow add a HTMLLoader in a new child window (with
transparent = false) to the stage as a new child. I have not yet
figured out exactly how to do this, so If anyone can provide
information on how to do this, I too would be appreciative.

Copied query not changeable when "Changeable Original" setting used.

Similar Messages

Maybe you are looking for