Copied screen program not working

Dear experts,
There is one screen program which is already created.
I have to remove One push button from text box.
I had this program and removed the push button .
Now when I test the program through SE51 the other pushbuttons are not working.
When I debugged It . The program is not calling my screen but it is calling SAPLSCR0 and screen Number 0401.
My doubt is from where this program is called.
After copying the program which screen numbers I have to give to copied program.
Can I give the same screen numbers Or I have to change screen number.
how to check the available screen numbers which I can use.

Hi,
What Raghavender said is exactly correct. Also Besides this, You have to create Transaction since it is the module pool program. While creation of the transaction code, make sure that you have to provide the main screen number. I mean the initial screen number. This effects the screen execution alot.
Cheers,
Murali Krishna T

Similar Messages

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IPad 2 has slowed down copy paste is not working it hangs when filling in user name , please do something to solve all these problems ,Apple please wake up

IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast

Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
Restore iPad to Factory Settings
http://support.apple.com/kb/ht1414
Download Past Purchases
http://support.apple.com/kb/ht2519

'Program not working' - panorama

When I attempt to create a panorama using Photoshop Elements 9 on my recently purchased Windows 8.1 pc I get a message saying 'Program not Working' and I have to close the editor. This function was ok on my old Windows XP pc. Can anyone help?

First, quit the editor, then restart it while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do. Note that if you have set the welcome screen to automatically open the editor, it won't work from that shortcut. Use the actual .exe/application file or the buttons in the organizer or on the welcome screen.

HT1212 My screen is not working

I can not enter my passcode nor turn my phone off to back up my phone. I am getting a new iPhone and i need to back my current one right now, but iTunes is not letting me due to my passcode. Since my screen is not working, how can I back up my account without having to use my screen?

Do as the User's Guide suggests and restore the device.
If the device has been used as designed, contact would be synced to a supported application on the computer or a cloud service and pictures taken with the device would regularly be copied off to a computer as would be done with any digital camera.
If you have not been using the device as designed, the data is likely lost and you've learned a valuable lesson about backing up your data.

What should I do if my touch screen is not working?

My touch screen is not working and I can reset my ipod because I cant turn it off. Help!

- Are you saying that yu can't do this?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Do it if you can.
- Next connect to the computer and restore from backup via iTunes
- If problem persists, retore to factory defaults/new iPod.
If iTunes does not see the iPod try placing the iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore
You can also use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

My USB port (closest to the screen) is not working? And what is an IR Receiver in my USB port?

Hi everyone,
     I recently found out that my USB port, closest to my screen, is not working. Before I called Apple Care for help, I performed a PRAM and a SMC RESET, which unfortunately did not work. I called Apple Care and they help me troubleshoot simple resets such as, shutdowns and restarts. The representative I spoke with conluded that the physical hardware has an issue and must be brought to the Apple Store for a diagnosis. I called the Apple Store to at least budget the fee for getting a USB port fixed and it's about $300.00. I never dropped my macbook or had any sort tactile encounterment with hard surfaces by dropping or hitting. I don't understand how my macbook pro would be physically damaged. I then thought maybe my software was out of date (right now I am running 10.9 Mavericks) or I forgot to do the minor software updates, but I was at a lost again because my macbook is up-to-date. I searched for further help and found a way to monitor what's plugged into my usb ports. (I read in the apple forums that a girl had nothing in her usb ports, but upon looking at the System Information> Hardware> USB, that the macbook recognizes that there are drives in the ports) I looked at my ports; one is being used by wirless mouse (the port that works) and the other (the port that doesnt work) is being used by an "IR RECEIVER". Now, is the IR Receiver actually using that port and that's why my macbook cannot recognize other devices inserted into that port? Or is the IR RECEIVER suppose to be in that port and that the hardware for that port is simply damaged (which would mean I need $300.00 to get that fixed)? I know this is a lot, but someone help me?
(PORT THAT WORKS)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c2d
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfa
FaceTime HD Camera (Built-in):
Product ID:          0x8509
Vendor ID:          0x05ac (Apple Inc.)
Version:           5.16
Serial Number:          DJHBAJ06VRDH7FL0
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa200000 / 3
Current Available (mA):          500
Current Required (mA):          500
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfa100000 / 2
Current Available (mA):          500
Current Required (mA):          2
Microsoft® Nano Transceiver v2.0:
Product ID:          0x0745
Vendor ID:          0x045e (Microsoft Corporation)
Version:           6.34
Speed:          Up to 12 Mb/sec
Manufacturer:          Microsoft
Location ID:          0xfa130000 / 6
Current Available (mA):          500
Current Required (mA):          100
Apple Internal Keyboard / Trackpad:
Product ID:          0x0252
Vendor ID:          0x05ac (Apple Inc.)
Version:           1.18
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa120000 / 5
Current Available (mA):          500
Current Required (mA):          40
BRCM2070 Hub:
Product ID:          0x4500
Vendor ID:          0x0a5c (Broadcom Corp.)
Version:           1.00
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa110000 / 4
Current Available (mA):          500
Current Required (mA):          94
Bluetooth USB Host Controller:
Product ID:          0x821a
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.42
Speed:          Up to 12 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0xfa113000 / 8
Current Available (mA):          500
Current Required (mA):          0
(PORT THAT DOESN'T WORK)
USB Hi-Speed Bus:
Host Controller Location:          Built-in USB
Host Controller Driver:          AppleUSBEHCI
PCI Device ID:          0x1c26
PCI Revision ID:          0x0005
PCI Vendor ID:          0x8086
Bus Number:          0xfd
Hub:
Product ID:          0x2513
Vendor ID:          0x0424 (SMSC)
Version:           b.b3
Speed:          Up to 480 Mb/sec
Location ID:          0xfd100000 / 2
Current Available (mA):          500
Current Required (mA):          2
IR Receiver:
Product ID:          0x8242
Vendor ID:          0x05ac (Apple Inc.)
Version:           0.16
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Apple Computer, Inc.
Location ID:          0xfd110000 / 3
Current Available (mA):          500
Current Required (mA):          100

I can help with the "IR Receiver" part of your question. That's the piece of hardware inside older MacBook Pros (MBPs) that lets them work with the Apple Remote. "IR" is the standard abbreviation for "infrared," the portion of the electromagnetic spectrum used by remotes for many common devices (stereos, cable boxes, Apple TVs, etc.). The remote sends a coded stream of IR pulses; a corresponding receiver in the target device "sees" the infrared light and decodes it. The MBP's internal IR Receiver sends the received signals to the processor via USB through an internal hub.
The most recent MacBook Pros have dropped the IR receiver and no longer work with the Apple Remote.

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
B-rock

HT1212 I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?

You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.

I have an ipod touch 3rd generation and the whole touch screen is not working.

I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

My 5800 touch screen is not working properly.

Hi,
Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
Thanks in advance,
Tarun Konduri.

Tarun_Konduri wrote:
Hi,
Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
Thanks in advance,
Tarun Konduri.
Tarun_Konduri wrote:
Hi,
Frequently my 5800 touch screen is not working. Some times I am unable to use the screen. It's just hung. The call, menu and disconnect buttons only work during this time. Can any please let me know what might be the problem.?
Thanks in advance,
Tarun Konduri.
Dear all,
I had the same issue with my nokia 5800, finally I found very interesting thing, I have been doing everything to bring my phone back to original condition where simply I can touch and access the phone.
Actually the issue was with the thin plastic piece which was put on the touch screen for its protection. I was struggling to touch and access the phone but i coudnt for almost 2 weeks, it was directing me to bottom left corner touch buttons of the phone and automatically opens and activate functional which I didn't want.
Solution was, I simply removed the thin plastic layer from the phone , Now it works fine.
Hope this will help.

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

The touch screen is not working when I am in the Music app of my iPod Touch. How do I get it to begin working? It just stopped today.

The touch screen is not working when I am in the Music app of my iPod Touch. How do I get it to begin working? It just stopped today.
Does anyone know what I can do? I am unable to switch screens, and I can not see the track that is playing. The only was I can switch between songs is to use the controls on my headphones.

Try the stamdard fixes to rule out a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

I need to turn off 'find my iPhone' so that I am able to restore my phone but my screen is not working. I logged into my iCloud but was not able to turn it from here. How do I do this?!

My iPhone 4 screen stopped working. The phone is still on but the screen is not working at all, it is juts black. I was told restoring my phone might solve this problem so i plugged it into iTunes. When I click on the restore iPhone button a message popped up saying I needed to turn off 'find my iPhone' in phone settings for the restore to be go ahead. Problem is I cant access my phone!
I went onto my cloud account to see if i could do it from here but it doesn't seem to be doing anything. Any ideas?

From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.

Copied screen program not working

Similar Messages

Maybe you are looking for