Copied TEXT MODULES or SMARTFORMS is required to translated into other lang
Hi all,
Actually I copied standard form HRRCF_CS_IT_EXA_QUESTIONNAIRE and Text Module HRRCF_CS_MT_QUESTIONNAIRE
into Z FORM and Z TEXTMODULE.
Standard ones have already converted into other languages like GERMAN.CHINES.etc, SO Do I NEED TO CONVERT MY Z FORM and Z TEXT module into convert into other languages explictly or std functionality is applicable to my Z* ones. please confirm on this.
I logged into DE , I gave my Z text moudele name in SMARTFORMS, I am able to see GERMAN TEXT.
The translation would be applicable to your 'Z' version as well.
Hope this answers your question.
Thanks,
Abhishek
Similar Messages
-
Create Text Module in smartforms
Hi guys,
How can we create text module in smartforms? and I need this to be translated into other languages...
Thanks a lot!
Always,
MarkHi,
In the smartforms initial screen you can find Test module radio button.
Provide the name and create the text there.
In the following screen you find Management tab, where bydefault translate to all language radio button is selected.
Thanks,
Phani Diwakar. -
URGENT: Copying text from word doc to text module in smartforms
Hi ALl
I have a problem, when i copy texts from word documents to smartforms, some words getting clubbed together. there is no space. I tried justified and left aligned. In both i am getting problem like this. Is there any special way to copy and paste the text to text module from word.
Thanks
MuraliTry to copy to notepad first, then copy to the text module.
-
Hi ,
I am trying to append a text at the end of main window at any page ..when ever main window ends.for this I created a text module in transaction SMARTFORMS.and tried to add it into the form when I am doing it ..How should I select the options in the TASK KEY..there are 4 things to be filled
TEXT NAME :
TEXT OBJECT : ???
TEXT ID :??? (I am doing a print doc for deliveries)
LANGUAGE
Anyone help me out of this ASAPIf you created a <b>text module</b> that you want to include in your form, you don't refer to it like that.
Once you selected the area / window your text should be in, right-click on the window name, select Create -> Text. Then, in the 'General Attributes' tab, you have to change the type to 'M' (Text module). On the next screen, you just specify the name of your text module that you want to include and the language key. You can specify under 'Conditions' that your text should only be displayed before or after the end of the main window (or whatever your requirement may be).
Now if you want to include an already existing text (that you created via SO10, for instance), then you have to select the type 'I' instead. For SO10 texts, the text object will be TEXT, and you should know the other three parameters if you were the one creating the text. Obviously, the text object will change to another value if you want to include an application-dependent text - then, as it was mentioned, SE75 will help you find the proper object name.
I'm not sure where do you see the "options in the TASK KEY"... hope this helps a bit though. -
Translations,folders and text modules in smartforms
Hi Everyone,
Please help me to learn :
1. Translations into different languages in smartforms
2. Creating folders in smartforms
3. Creating and the usage of text modules.
4. More information about page navigations in smartforms.
Helpful links and reference material would be helpful.
KKhi kk,
text modules:
these r like global texts, which we created once can be used in any smartform.
u can create this in t-code: smartforms
select the radio button text modules, in the editor give the text which u want.
to use this in our form:
select the window -> create text
in genaral attributes -> text type -> select text module
give the name, language(generally en) which u created. then it gets the text which u gave in text module.
note: when using existing text modules, as we r not aware of text size, it is better to use them in main window. so that we wont lose any data.
hope it helps u. reward if helpful. -
Difference between Include Text and Text Modules in Smartform?
Hello Experts,
I need to know the differences between Include Text and Text Modules in the Smartform.
When we create a Text in smartform, the text type can be text element Or Include Text Or Text Module.
Now i need to know the differences between Include Text and Text Module.
Thanks and Best Regards,
SureshHi Suresh,
Kindly check the below link for Text Modules.
[http://help.sap.com/saphelp_nw70/helpdata/EN/24/ccbd2a00c811d4b588006094192fe3/content.htm]
For Include Text:
[Include Text|http://help.sap.com/saphelp_nw70/helpdata/en/03/7560efcf0d11d3b565006094192fe3/content.htm]
Regards,
-Syed. -
How do I copy text and objects from pages to and paste into Email, objects don't show in Email
Anyone know how I copy text and objects from pages and paste into Email, objects don't show in Email, thanks
You can't expect Mail to support all the objects of Pages which can include anything up to charts generated from spreadsheet tables.
Even if Mail was a superset of Pages, what would the recipients who don't have either Mail or Pages, make of it?
Peter -
Smartform translation into other language
Hello Experts,
i have a requirement of printing of smartform in multiple languages i.e english and french or english and chinese depending on the selection. i have developed my form in 'English'. Now, how to translate the form in other language? Whats the process of doing that..
Can you please explain step by step
Regards
ShekharHi,
First you change the seetings in your Smartform.
Goto Global Settings ---> Form Attributes ---> General Attributes tab
Select the Radio Button "To All Languages".
Now you can use smartforms in any languages.
Please Go through the link for further reference:
URGENT : Converting Smartform into different languages
Re: Multiple Language Support in Smartforms
Hope this will help you.
Regards,
Dhanalakshmi L -
Pls explain how to add standard text in sapscript & smartforms
Dear friends,
pls explain how to implement standard text into sap script and smartforms.
in how many we can do.
and what is diff between include text & text modules in smartforms.
how we can translate into multiple languages.
Regards
Jagadeeshwar.Bhi,
for the include text goto tcode so10.
for changing the smartform and scripts use there methods..
1. goto se63>translation->abap objects->other long texts->FS Forms and Styles---> for scripts use Forms
for smartforsm use SAPSmart form
for styles use Styles
2. goto se71->utilities->original language.---> source lang
(for scripts) target lang
to include the include text created in the tcode so10 in the smartforms go to general attributes of the text element--text type> include text...
regards,
venkat.
Edited by: venkat appikonda on Mar 22, 2008 11:56 AM -
Very Urgent Text Modules - Smartform in diff lang
Hi,
Could any one give me a detailed info on how to use one text module in Smartform to other languages <b>without logging</b> into the system in that language.
I <b>tried</b> Example in the thread containing as below nut unable to succeed.
/: INCLUDE z_txt OBJECT TEXT ID txt LANGUAGE &Variable&
Name: z_text
Object: Text
Text id: Txt (Text id from SO10)
Language: variable[/code][/code][/code]
Its very Urgent
Thanks
DanDan...
you want to give the Language for Text elemetn dinamically..
in genaral attributes of the Text Module winodow..
Text name: xxxxxxx
Text Object: Text
Text ID: ST
Language: as below...
so wht i am suggesting is give the &CONTROL_PARAMETERS-REPLANGU1& (if it contain the Language)..
in Language tab.. Press the button right side of this element ">" then the text box will be become large.. then enter &CONTROL_PARAMETERS-REPLANGU1&..
if it is not clear plese tell wht exactly you r requirement again
<b>Please Close this thread.. when u r problem ise solved</b>
Reward if Helpful
Regards
Naresh Reddy K -
Problem related to language translation in Smartforms using Text Module.
I have done translation of text module from English (enUS) to Spanish (esSP) using SE63. In text node I have used this translated text module. Language of the node is selected as sy-langu. So when I logged into System in English language I should be able to see the output in English but it giving output in Spnaish. While debugging sy-langu value is 'E'.
hi,
You have a text in english and you have maintained the translation in Spanish, mention the original text in the SmartForm. in this way when your login lang is EN you will see that text in Eng and if the lang is Spanish you will see the translation in the output.
Thanks. -
Hi friends,
Could any one tell me what is "Text module" in Smartforms.
How we use them in Standard Smarforms .
With Regards,
Ramesh.Hi ramesh,
In smartform there are three text types:
<b>Text element</b> : to enter new text in the PC editor
<b>Text module</b> : to include a text module
<b>Include text</b> : to include an existing SAPscript text
The texts are displayed in the form using text nodes. The only exceptions are addresses. This uses its own node. The predecessor node of the text node determines its use:
<b>Predecessor node Used to</b>
Sub window Position text on one or more pages
Main window Display text in relation to other nodes in the main window,
it may cover several pages
Template Displays texts for table cells of a static table
Table Display table contents
Header and footer Display column headings and grand totals in tables
Event node Display subtotals in a table
<b>Including text modules:</b>
<b>Text module</b> of the text node is used to refer to an existing text module in the system. The text modules can be used in two ways:
<u><i><b>STEPS :</b></i></u>
1) Refer to the text module. The text then appears read-only in the PC editor and
is included when the form is printed.
2) Copy the text module. The system then copies the text of the module and
automatically converts the text node into an editable text element.
3) To create a text node , call the context menu for that node in the tree
structure that shall contain the text and choose create->text
4) Enter a unique name for the node and a description
5) On the general attributes tab select the text type text module
6) Enter the name of the text module in the text name field
reward points if useful....
thanks ,
Ginni... -
How to copy a module pool program
Hi All,
How to copy a module pool program from one system (Organization) to other system(organization) i.e. from one company to other company. My requirement is to how to download & upload module pool program.
Regards,
Rajesh VasudevaHi,
Check the below link
[How to DOWNLOAD a whole module pool program????]
[Download the Module pool program]
Cheers,
Surinder -
How can I edit a Text Module in Landscape
Hi to all,
I would like to create a new Text Module in Smartforms and I would like to know if the graphic editor, similar to MS-Word, can be setup to display the page in Landscape?
My text is always edited in Portrait format and I would like to avoid calculating my characters to fit in a larger landscape presentation format.
Thank you in advance for your answers.
Best regards,
SylvainHi,
Thank you all for your answers but I still have the same issue.
@ Hari,
I tried your procedure and found that I was using DINA4 as a default page format. In SPAD this format was defined for Portrait and Landscape. I created a new page format ZDINA4 with a larger width but the text module presentation remains the same. I only defined the landscape record and I have the same result by clicking Print Layout or Draft. Do you know if this page format has an influence on the Text Module presentation? I would like to put the ruler much wider that it is locked at 21. Any suggestion on how to enlarge the ruler?
@ Adrian,
Yes I know how to set up the page format in the Smartforms itself but I am talking about the text module. My key user will create the Text Module and I would like to have the same width as my landscape page in the form. If will make things easier for the user to make the data entry since it looks like MS-Word except for the Portrait/Landscape issue. Any idea?
Thank you in advance for your suggestion.
BR,
Sylvain -
Smartform - Form or text into diff Lang
Hi,
Could any one give me a detailed info on how to use one text module in Smartform to other languages without logging into the system in that language.
I tried Example in the thread containing as below nut unable to succeed.
/: INCLUDE z_txt OBJECT TEXT ID txt LANGUAGE &Variable&
Name: z_text
Object: Text
Text id: Txt (Text id from SO10)
Language: variable[/code][/code][/code]
Its very Urgent
Thanks
DanHi,
Try using READ_TEXT FM for different language text.
Regards,
Amit
Maybe you are looking for
-
I hate that my messages pop up while I'm watching Netflix, and I have finally removed Messages from my notification center. Yet, for some reason i still keep hearing the noise that lets me know I have a message, and I a still seeing badges pop up on
-
I do have a third party keyboard installed (fleksy), and I removed english and emoji from the keyboards list in settings before rebooting the ipod. When it booted up, it asked for my device password with the default keyboard, but I can't type any let
-
How to get the full path or name of the Layer to which Filter is applied?
Hi All, I have created a layer using some background image as source. How to get the name or ful path of the background image? I checked the documentation and found GetPathNameProc(SPPlatformFileSpecification*) function, but I couldn't get
-
How to test E- filing GB scenario with live server.
Hi, XI ver: 7 E-Filing ver: 1.0, patch 10 I am trying to configure e-filing for GB based on the configuration guide. After importing the latest XI content for E-Filing and HR, I have configured the outbound and inbound interfaces in ID. After complet
-
Error when importing a .fxp file
When I try to import a .fxp file, I get an error: An error occured when attempting to open the FXP file. Verify if any other applications are using this file or if the destination directory has writer permissions. Thank you for any help you can provi