Copied Transaction ZCS02 not working...

Hi,
I want to create a copy of transaction CS02. But this is a function Group (CSDI).. After all, i copy the Function Group with all Function Modules. Also create a t.code ZCS02 through SE93 (copy program SAPMC29S also).
But, when i m executing the ZCS02 transaction, it's not working..means not responding.
Please tell me what would be the problem..
Regards,

Thanks for ur reply,
We have some issues with the users, so don;t want to give the CS02 transaction to them...so i want to create a new Z transaction for user.
But after copy the function group from SE80, it is not working properly...
Please suggest..
regards......
Edited by: Prince Kumar on Jun 4, 2009 3:20 PM

Similar Messages

  • IPad 2 has slowed down copy paste is not working it hangs when filling in user name , please do something to solve all these problems ,Apple please wake up

    IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast

    Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
    Go to Settings>Safari>Clear History and Website Data
    Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
    If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
    Restore iPad to Factory Settings
    http://support.apple.com/kb/ht1414
    Download Past Purchases
    http://support.apple.com/kb/ht2519

  • Copy/paste function not working in Firefox 22. Always good in previous versions

    Copy/paste function not working in Firefox 22. Always good in previous versions editions

    Well I've uninstalled FF22, thanks for the suggestion.
    Chrome works perfectly with ZA and C&P.

  • SQL*Plus COPY command does not work

    SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP.
    copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name>
    Does it work on different versions of SQL Developer ?
    Anyone had any success in trying COPY command in SQL Developer?
    Thanks in advance.

    While it hasn't been updated for v1.5, this page lists the supported SQL*Plus commands. COPY is explicitly listed as not supported.
    theFurryOne

  • I reinstalled microsoft word and now have a copy that will not work that is the default

    I reinstalled microsoft word and now have a copy that will not work that is the default

    I have MS word 2008 for MAC version 12.1
    When I left click the MS word applications that is the default seems to be corrupted as indicated by the message below but when I right click i can select the second MS word application that works.  The message from the left click is
    Process:         Microsoft Word [10367]
    Path:            /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
    Identifier:      com.microsoft.Word
    Version:         ??? (???)
    Build Info:      Unknown-80409~0
    Code Type:       X86 (Native)
    Parent Process:  launchd [128]
    Date/Time:       2011-07-25 17:25:09.413 -0400
    OS Version:      Mac OS X 10.6.7 (10J869)
    Report Version:  6
    Interval Since Last Report:          166920 sec
    Crashes Since Last Report:           5
    Per-App Crashes Since Last Report:   5
    Anonymous UUID:                      1C5621D4-1D85-488D-A24C-CB298759DBC6
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
      Referenced from: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.53f13
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
    Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528ASQ, 931.51 GB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0x24300000
    USB Device: Cruzer Mini, 0x0781  (SanDisk Corporation), 0x5150, 0x24310000
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0x24320000
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26500000
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000
    USB Device: Back-UPS ES 750 FW:841.I3 .D USB FW:I3, 0x051d  (American Power Conversion), 0x0002, 0x06400000
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000

  • Copy fuction does not work

    When I try to make a copy of something the arrow just keeps spinning and never allows me to copy.

    Hi , Welcome to the HP Forums! I understand that the copy function does not work with your HP Envy 5530. I am happy to look into this copying issue for you!  So I have a better understanding of your question. Is this happening when printing from the computer? Or, when you place a sheet of paper on the glass and select copy?  If you are trying to print from the computer, what Operating System do you have? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. In the meantime, please make sure the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. Also, you will want to make sure the printer's firmware is up-to-date. Getting Printer Updates for HP Photosmart 5520 e-All-in-One, HP ENVY 5530 e-All-in-One, and HP Deskjet Ink Advantage 4510 and 5520 e-All-in-One Printer Series. Thank you for posting, and hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • Why does the "fix" for firefox copying and pasting not work?

    I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.

    In what way is Firefox slow?
    Is this all the time or only with loading web pages?
    What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?

  • Copy inspection results not working

    Dear Gurus,
    I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
    Any ideas??
    Regards,
    MaX

    Go through following docs
    http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
    Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf

  • Copied screen program not working

    Dear experts,
    There is one screen program which is already created.
    I have to remove One push button from text box.
    I had this program and removed the push button .
    Now when I test the program through SE51 the other pushbuttons are not working.
    When I debugged It . The program is not calling my screen but it is calling   SAPLSCR0 and screen Number 0401.
    My doubt is from where this program is called.
    After copying the program which screen numbers I have to give to copied program.
    Can I give the same screen numbers Or I have to change screen number.
    how to check the available screen numbers which I can use.

    Hi,
         What Raghavender said is exactly correct. Also Besides this,  You have to create Transaction since it is the module pool program. While creation of the transaction code, make sure that you have to provide the main screen number. I mean the initial screen number. This effects the screen execution alot.
    Cheers,
    Murali Krishna T

  • Copied layout is not working for Sales order item assinment block

    Hi Experts,
    I copied the standard componet BT115IT_SLS/items view layout  with custom role configuration key and worked fine.
    I have added one more field to the item view  with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete  BTADMINI context fileds and This is the issue.
    I have seen configured fields only in  the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
    But Items assignment block is displaying all the fileds (taking  from the context node BTADMINI).
    I have deleted existing customer configuration and again copied  from the standard layout.But I got the same issue.
    I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
    Please help me , where I have done the mistake and provide me some inputs.
    Thanks,
    Venkky

    Hi Experts,
    Solved isuues myself.
    The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
    Thanks,
    Venkky

  • Copy Function is Not Working properly In Order Management

    Hi,
    Description-
    When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
    option class lines and the option item lines (unshipped and shipped).
    Example-
    Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
    pd-pto-model 5 qty
    pd-std-item1 (included item) 5 qty
    pd-pto-oc (option class) 5 qty
    pd-std-item1 (included item with rfr checked) 5 qty
    pd-std-item2 (option item with rfr checked) 5 qty
    pd-std-item3 (option item) 5 qty
    Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
    pd-pto-model Closed
    pd-std-item1 (included item) Picked
    pd-pto-oc (option class) Closed
    pd-std-item1 (included item with rfr checked) Picked
    pd-std-item2 (option item with rfr checked) Picked
    pd-std-item3 (option item) Partially Interfaced to receivables
    Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
    Anyone can help me on this issue.
    Thanks,
    Chinna

    haisrig wrote:
    Hi ,
    We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
    Program name :- sel.cpp
    int main()
    struct timeval sleeptime;
    sleeptime.tv_sec = 60;
    printf("1\n");
    select(0,NULL,NULL,NULL,&sleeptime);
    printf("2");
    return 0;
    When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
    When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
    When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
    I think because of that the above select function is not working properly in solaris 10.
    Why the tv_usec is not taking 0 as default values in Solaris 10?
    We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
    It sounds to me that you've been lucky for 20 years then.
    Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
    (dbx) run
    Running: sel
    stopped in main at line 9 in file "sel.cpp"
        9      sleeptime.tv_sec = 60;
    (dbx) print sleeptime
    sleeptime = {
        tv_sec  = -4198732
        tv_usec = 0
    }That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
    (dbx) print sleeptime
    sleeptime = {
    tv_sec = -830490588
    tv_usec = 134510556
    and I see the behaviour that you describe.
    Paul

  • Transaction variant not working in quality

    Hi,
    I have created a transaction varient in SHD0 and activated it in develpoment and then
    it is working fine in development system.Then variant transported to quality and there also
    it is activated but somehow it is not working in qulaity sytem.
    I checked in the respctive transaction with following path
    SYSTEM>>>>>STATUS>>>>>SAP REPOSITORY DATA and i can find it is transaction variant name
    below screen program.
    Pl suggest the resolution.
    Regards,
    Rushikesh

    Hi,
    Check the variant is  transported properly in QA. If present then check the transaction for the same.
    If you make this transaction for a table the check the table delivery and maintenance allowed or not. It should be maintenance allowed.
    Thanks
    Subhankar

  • File copy in KM not working from a par file.

    Hi Experts,
                      We created a par file which will copy a file from a folder and copy this onto a seperate folder under the same parent folder. This applications works well on testing system, but is not working when deployed to the portal server where it supposed to work.
    Please give your thoughts and your valuable suggestions on this issue.
    Thanks in advace
    Sateesh

    Hi Raghu,
                   What is CM system and where it needs to be added.
    I am copying the code please check and give your valuable inputs.
    import java.util.Properties;
    import com.sap.tc.logging.FileLog;
    import com.sap.tc.logging.Severity;
    import com.sap.tc.logging.TraceFormatter;
    import com.sapportals.wcm.repository.CopyParameter;
    import com.sapportals.wcm.repository.ICollection;
    import com.sapportals.wcm.repository.ICopyParameter;
    import com.sapportals.wcm.repository.IResourceList;
    import com.sapportals.wcm.repository.ResourceContext;
    import com.sapportals.wcm.repository.ResourceFactory;
    import com.sapportals.wcm.service.scheduler.ISchedulerTask;
    import com.sapportals.wcm.util.uri.RID;
    import com.sapportals.wcm.util.usermanagement.WPUMFactory;
    public class archiveContent implements ISchedulerTask {
         private static final com.sap.tc.logging.Location logger =
              com.sap.tc.logging.Location.getLocation("KMScheduler");
      public void run( String id, Properties properties ) {
         // implement the tasks to be scheduled
         logger.setEffectiveSeverity(Severity.ALL);
         FileLog mFile1 = new FileLog("/usr/sap/EPD/JC00/j2ee/cluster/server0/log/KMScheduler/reportArchiver.log",10485760,5,new TraceFormatter("%d %m"));
         logger.addLog(mFile1);
         String Filename=null;
         int flag=0;
         logger.infoT("Entering Archive Application try block");
         try{
         com.sapportals.portal.security.usermanagement.IUser epUser = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
         ResourceContext ctx = new ResourceContext(epUser);
    //     Get the path of the bi-broadcast (start) folder and create a resource
         //RID birid = RID.getRID("/bi-broadcast");
         RID birid = RID.getRID("/documents/KMScheduler_test");
    //     Create resource holding the contents of the bi-broadcast/top level folder
         com.sapportals.wcm.repository.IResource bires= ResourceFactory.getInstance().getResource(birid,ctx);
         if(bires!=null)
    //          Create a collection of the bi-broadcast resource and get the child resources i.e. Categories
              ICollection categorycollection=(ICollection)bires;
              IResourceList categorylst= categorycollection.getChildren();                                             
              com.sapportals.wcm.repository.IResource categoryres = null;
              if(categorylst!=null)
                   for(int i=0;i<categorylst.size();i++)
                        categoryres = categorylst.get(i);
    //                    Check if the Category is Template. if it is do not enter the loop
                        //if(!categoryres.getName().equalsIgnoreCase("Template"))          
    //                         Get the path of the Category folder
                             //RID categoryrid = RID.getRID("/bi-broadcast/"+categoryres.getName());
                             //RID categoryrid = RID.getRID("/documents/KMScheduler_test/bi_reports/"+categoryres.getName());
                             //logger.infoT("Folder ""\"/documents/KMScheduler_test/bi_reports/"categoryres.getName()+"\" detected");
                             if(categoryres!=null)
    //                              Create a collection of the Category resource and get the child resources i.e. Area      
                                  ICollection areacollection=(ICollection)categoryres;
                                  IResourceList arealst= areacollection.getChildren();                                                            
                                  com.sapportals.wcm.repository.IResource areares = null;     
                                  if(arealst!=null)
                                       for(int j=0;j<arealst.size();j++)
                                            areares=arealst.get(j);
                                            Filename=areares.getName();                              
    //                                        Get the path of the Area folder
                                            RID arearid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"+areares.getName());
                                            logger.infoT("Folder ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()+"\" detected");
                                            if(areares!=null)
    //                                             Create a collection of the Area resource and get the child resources i.e. Region
                                                 ICollection regioncollection=(ICollection)areares;
                                                 IResourceList regionlst= regioncollection.getChildren();                                        
                                                 com.sapportals.wcm.repository.IResource regionres = null;     
                                                 if(regionlst!=null)
                                                      for(int k=0;k<regionlst.size();k++)
                                                           regionres=regionlst.get(k);
                                                           Filename=regionres.getName();
    //                                                       Get the path of the Region folder
                                                           RID regionrid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"+regionres.getName());
                                                           logger.infoT("Folder ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()+"\" detected");
                                                           if(regionres!=null)
    //                                                       Create a collection of the Region resource and get the child resources i.e. File
                                                                ICollection filecollection=(ICollection)regionres;
                                                                IResourceList filelst= filecollection.getChildren();                                             
                                                                com.sapportals.wcm.repository.IResource fileres = null;     
                                                                if(filelst!=null)
                                                                     for(int l=0;l<filelst.size();l++)
                                                                          fileres=filelst.get(l);
    //                                                                      Check if the file is Archive or Special. if it is don not move it to Archive
                                                                          if(!fileres.getName().equalsIgnoreCase("Archive"))
                                                                               if(!fileres.getName().equalsIgnoreCase("Special"))
                                                                                    flag=1;
    //                                                                                Get the path of the File in the region folder
                                                                                    RID filerid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Archive/"+fileres.getName());
                                                                                    logger.infoT("File ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Archive/"fileres.getName()+"\" detected");                                                                                                              
    //                                                                                Move one child at a time to the Archive folder
                                                                                    ICopyParameter cp=new CopyParameter(true);
                                                                                    fileres.move(filerid,cp);
                                                                                    logger.infoT("Archiving file \""fileres.getName()" from folder /documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"\"");
                                                                               else if(fileres.getName().equalsIgnoreCase("Special"))
                                                                                    RID ar_analysisrid=RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special");
                                                                                    ICollection aranaylsiscollection=(ICollection)fileres;
                                                                                    IResourceList aranalysislst= aranaylsiscollection.getChildren();                                             
                                                                                    com.sapportals.wcm.repository.IResource aranalysisres = null;
                                                                                    if(aranalysislst!=null)
                                                                                         for(int m=0;m<aranalysislst.size();m++)
                                                                                              aranalysisres=aranalysislst.get(m);
                                                                                              if(!aranalysisres.getName().equalsIgnoreCase("Archive"))
                                                                                                        flag=1;
    //                                                                                                    Get the path of the File in the region folder
                                                                                                        RID arfilerid = RID.getRID("/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"+aranalysisres.getName());
                                                                                                        logger.infoT("File ""\"/documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"aranalysisres.getName()+"\" detected in Special folder");
    //                                                                                                    Move one child at a time to the Archive folder
                                                                                                        ICopyParameter cp=new CopyParameter(true);
                                                                                                        aranalysisres.move(arfilerid,cp);
                                                                                                        logger.infoT("Archiving file \""fileres.getName()" from folder /documents/KMScheduler_test/"categoryres.getName()"/"areares.getName()"/"regionres.getName()"/Special/Archive/"aranalysisres.getName()"\"");
    Edited by: Jabi123 on Jan 17, 2011 7:13 AM

  • Simple copy of reports not working - help please

    Hello
    I have this function that was written to copy a given report object to a given folder. The code is not working - the copyObj = col.Copy(obj,2) appears to be failing.
    Can anyone shed some light on this? Thank you in advance!
    - Russell
    My function:
    function CopyReport (objID, DestFolder, iStore)
    dim col
    dim obj
    dim copyObj
    on error resume next
    'QUERY FOR OBJECT TO COPY
    str = "SELECT * FROM CI_INFOOBJECTS WHERE SI_ID = " + objID
    set col = iStore.Query ( str )
    obj = col.Item(1)
    'COPY THE OBJECT
    copyObj = col.Copy(obj,2)
    'SET THE PARENTID OF THE COPIED OBJECT
    copyObj.Properties.Item("SI_PARENTID").Value = DestFolder
    'SET THE PARENT FOLDER OF THE COPIED OBJECT
    copyObj.Properties.Item("SI_PARENT_FOLDER").Value = DestFolder
    'COMMIT THE COLLECTION
    iStore.Commit(col)
    end function

    Hi All
    I've resolved the problem with the copy and am posting the code below. I'd appreciate it if it could be placed in the appropriate forum so that it may be a resource for other developers in the future. I've left in all of my debugging/error checking code for reference as well.
    - Russell
    The working copy function (with loads of debugging code) is this:
    function CopyReport (objID, DestFolder, iStore)
    'Function CopyReport
    'Parameters:
    '  objID - the ID of the report to copy
    '  DestFolder - the ID of the destination folder for the copy
    '  iStore - the InfoStore to use
    'Returns: A text string that is displayed in a web page via response.write that includes the
    '  name of the report if copied or the error information as appropriate.
    dim col
    dim obj
    dim copyObj
    dim newCol
    on error resume next
    'QUERY FOR OBJECT TO COPY
    str = "SELECT * FROM CI_INFOOBJECTS WHERE SI_ID = " + objID
    set col = iStore.Query ( str )
    If Err.Number <> 0 Then
      CopyReport = "iStore.Query failed<br>"
      CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
      CopyReport = CopyReport & "<br>" & str
      Exit Function
    End If
    set newCol = iStore.NewInfoObjectCollection()
    If Err.Number <> 0 Then
      CopyReport = "newCol creation error"
      CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
      CopyReport = CopyReport & "<br>" & str
      Exit Function
    End If
    set obj = col.Item(1)
    If Err.Number <> 0 Then
      CopyReport = "OBJ = col.item(1) error<br>"
      CopyReport = CopyReport & "<br>" & str
      CopyReport = CopyReport & "<br>Error: " & Err.Number & " - " & Err.Description
      Exit Function
    End If
    'COPY THE OBJECT
    set copyObj = newCol.Copy(Obj, 2)
    If Err.Number <> 0 Then
      CopyReport = "copyOBJ error"
      CopyReport = CopyReport & "<br>Count: " & col.Count
      CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
    '  Exit Function
    End If
    'SET THE PARENTID OF THE COPIED OBJECT
    copyObj.Properties.Item("SI_PARENTID").Value = DestFolder
    If Err.Number <> 0 Then
      CopyReport = "Error setting SI_PARENTID to " & DestFolder
      CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
      Exit Function
    End If
    'SET THE PARENT FOLDER OF THE COPIED OBJECT
    copyObj.Properties.Item("SI_PARENT_FOLDER").Value = DestFolder
    If Err.Number <> 0 Then
      CopyReport = "Error setting SI_PARENT_FOLDER to " & DestFolder
      CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
      Exit Function
    End If
    'COMMIT THE COLLECTION
    iStore.Commit(newCol)
    If Err.Number <> 0 Then
      CopyReport = "Commit error"
      CopyReport = CopyReport + "<br>Error: " & Err.Number & " - " & Err.Description
      Exit Function
    End If
    'Return the object info
    CopyReport = copyObj.Title
    end function
    Edited by: Russell L Magidson on Dec 11, 2008 5:12 PM
    Edited by: Russell L Magidson on Dec 11, 2008 10:28 PM
    Edited by: Russell L Magidson on Dec 11, 2008 10:29 PM

  • Dreamweaver copy and paste not working

    Hi
    The copy and paste functions on my Dreamweaver have stopped
    working.
    The copy and paste functions are greyed out in the edit drop
    down in both code and design views. Ctr C and V are also not
    working.
    Tried various fixes including moving the config folder and
    reinstalling but nothing has worked.
    Any suggestions?
    Thanks
    Dirk

    You can try this simple fix -
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "dirkwalker" <[email protected]> wrote in
    message
    news:ebhgfi$8qj$[email protected]..
    > Hi
    >
    > The copy and paste functions on my Dreamweaver have
    stopped working.
    >
    > The copy and paste functions are greyed out in the edit
    drop down in both
    > code
    > and design views. Ctr C and V are also not working.
    >
    > Tried various fixes including moving the config folder
    and reinstalling
    > but
    > nothing has worked.
    >
    > Any suggestions?
    >
    > Thanks
    >
    > Dirk
    >

Maybe you are looking for

  • The Elder Scrolls Online Wallpaper Contest

    ***Winner Announce*** Thanks for all of your submissions to The Elder Scrolls Online Wallpaper Contest. Four lucky designers have been chosen for their creativity, Your four winners are as follows: Grand Price: MSI X99S GAMING 9 AC Motherboard Lo Rel

  • Error when upgrading from 8.1.3.0 domain to 9.2.0.0 domain

    I am running the upgrade.sh found in the WLS92/common/bin directory and all goes well until I get this... <Dec 13, 2006 10:54:00 AM EST> <INFO> <Upgrade> <BEA-800000> <Starting in-memory configuration upgrade ... > java.lang.NullPointerException at w

  • What is the definition of 'item' in Elements 6?

    I am about to convert to Elements 7 and have noticed a small issue that I can't find the answer to.  It is probably trivial but before I go on to Elements 7, I would like to understand the meaning of the word 'item'. At the bottom of the Organizer sc

  • Resizing datafiles in oracle 10g

    Hi, My total datafile size was showing around 100g (physical file size). But when actually query dba_segments to see how much tables and indexes are occupying it is coming around max of 30g. So how can i reclaim the remaining datafile size. As i know

  • Price of Adobe lcds 3: ByBy Adobe LiveCycle Data Services 3 final

    Hi Adobe, first of all I would like to mention, that I worked since April 2009 with lcds 3 day and night. I was really excited about the product. We planned to set up a start up compay using lcds 3. When the final version came out, I was completey sh