Coping files from G5 to Xserve G4 crashes the server

The past week when I copy a large amount of file from my G5 to the Xserve (w/raid) { I am copying files from one raid partition to a new raid partition}. The server will start locking up and everyone that is connected will start getting the beach ball. The only thing I can do is restart the server and raid. I can copy from the server the sames files from one raid to the other with out any problems but not from a client.
Has anyone seen this happen to them.

You should post this in one of the appropriate forums here.
http://discussions.apple.com/category.jspa?categoryID=107
The is the iPod nano forum. : )

Similar Messages

Restore Password Manager .pwd File from Backup Image after HDD crash

Hi
After a HDD crash i try to recover my Password Manager pwd File from a Backup Image. In the Image the file is located in "C:\Dokumente und Einstellungen\XXX\Anwendungsdaten\Lenovo\Client Security Solution"
But if i try to import it the PW-Manager asks for a Password. But no PW works. Not the Windows PW (same as before) or not the Sec-Chip PW works. I tryed to copy the pwd File into the same folder but it´s not recordniced from the PW Manager.
Can somebody help me please to get my Passwords back?
thanks
Coolskin

Hi,
that saved passwords were stored also in TPM chip, so if Password maanger can not find them there , what is obvious, then I dont think, that this will work.
However it would be a test to install CSS withtou TPM recognision. Uninstall CSS and install CSS with EMULATIONMODE =1, this will install CSS in software emulation mode and do not need to contact with hardware TPM.
To be honest I never tried this scenario, but in if I would be in your situation, then I would test it just to see.
However I don't give it a big chance, that this will work.
Sorry for bad news
Rgrds

HT5085 What happen if I lose the music files from my desktop but I have the music in my devices (ipad & ipod)?

What happen if I lose the music files from my desktop but I have the music in my devices (ipad & ipod)?

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
Note: The information below hasn't been updated since early 2013.
- Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
- deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141
Hopefully you are not really running OS 9.1 as it states in your computer profile.

If you delete files from your computer, BlackBerry Link deletes the file or collection from your device?

I found the below description from the help of BlackBerry Link, however i never get it work.
Any one know whats wrong or what i need to set?
About deleting music, pictures, videos, and documents?
After you sync your music, picture, video, or document files between your computer and your BlackBerrydevice, if you delete a file or a collection of files, the following actions occur:
If you delete files from your computer, BlackBerry Link deletes the file or collection from your device.
If you delete files from your device, BlackBerry Link doesn't delete the file or collection from your computer.
For information about how to delete a file from your device, tap the Help app on the home screen of your device.

Hey hkfoolman,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Go into BlackBerry Link and click on the BlackBerry and then click on Options. Make sure you have Music, Pictures, Videos and Documents checkmarked for synchronization. Once these are checked, try to remove the files.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
Håkan

Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter

I set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same ID). how do i consolidate the two users on my new mac book?

i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?

Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
One can still do most Admin things in Standard user.

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

See
Deleting backups via the Finder on Lion 10.7.x or later:
http://pondini.org/TM/12.html
Hold option (alt) while emptying the Trash.
See also
http://pondini.org/TM/E6.html
Message was edited by: WZZZ

Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

Photos are stored in your home folder (~pictures).
Barry

How can I read text files from LAN if I only know the hostname?

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
<p>1. How can I read text files from LAN if I only know the hostname, or IP address?
<p>2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.
(ex. how can I read the 120th line?)
<p>Please help!
<p>sorry for the bad english

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
1. How can I read text files from LAN if I only know the hostname, or IP address?You need to know the URL of the file. You need to know the hostname, port, protocl and relative path.
The hostname is server, not file.
2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.Use the seek() to get to a random byte.
(ex. how can I read the 120th line?)The only way to find the 120th line is to read the first 120 lines. You can use other file formats to find the 120th line without reading the whole file but to need to be able to detremine where the 120th line is

[svn] 4267: Change path to Assets.swf in eclipse . project file from full hardcoded path to use the FLEX_SDK variable as the base path .

Revision: 4267
Author: [email protected]
Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
Log Message:
Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
Modified Paths:
blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

Revision: 4267
Author: [email protected]
Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
Log Message:
Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
Modified Paths:
blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

How to capture a .gif file from a spectrum analyzer and save the file in PC

I want to capture a .gif file from a spectrum analyzer and save the file in PC, but I've got a problem when read data from the instrument. I'm not sure how to format the string got from the instrument , When I use "%s" or "%t" as the read string format the data got from the instrument is truncated.
my code are as follows, could anyone tell me where i am wrong?
char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%t", resultsArray);
printf("%s", resultsArray);
getchar();
Solved!
Go to Solution.
Attachments:
readResult.docx ‏50 KB

char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%b", resultsArray);

I accidentally deleted some files from iCloud, how do I recover the files if I do not have other backup or in time machine

I accidentally deleted some files from iCloud, how do I recover the files if I do not have other backup or in time machine

You don't.

Archiving a file from a PC to SAP without the GUI

Hi,
I am looking for a way to send a file from a local pc to SAP Content Server 6.40 (archive link or Kpro).
We already tried to use a bapi (BDS_BUSINESSDOCUMENT_CREATEF) that is linked to GOS but it failed. This bapi is cheking if the GUI is open. Since all the process should be done in the background, it fails.
We are actually using VBA in excell to call RFC/Bapi to try to do this.
Anybody has an idea on how to do this ???
many thanks in advance,
nicolas

Hi Samir
You can try running the program RC1TCG3Z
SAP CG3Z
SAP TCODE Description: Upload file
SAP Program/Report Executed for T-Code: RC1TCG3Z
CG3Y : Download appl. to frontend
Source file on application server Path of the file on the applicationserver
Target file on front end Path of the file on the frontend server (PC)
Transfer format for data Download the file as text (ASC) or in a binaryformat (BIN)
Overwrite file Overwrite the target file if it already exist (withoutprompting)
To start the download: <SHIFT-F1> (left button)
To cancel: <F12> (right button, red X)
CG3Z : Upload from frontend to appl.
Source file on front end Path of the file on the frontend server (PC)
Target file on application server Path of the file on the applicationserver
Transfer format for data Download the file as text (ASC) or in a binaryformat (BIN)
Overwrite file Overwrite the target file if it already exist (withoutprompting)
To start the upload: <SHIFT-F2> (left button)
To cancel: <F12> (right button, red X)
Regards
dEE

After I have deleted a file from my iphone, it still shows the song with a download button? Is there a way to get rid of this totally, so it doesn't show at all?

After I have deleted a file from my iphone, it still shows the song with a download button? Is there a way to get rid of this totally, so it doesn't show at all?

The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email. What is happening?

Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason. The recipient is not new. This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
In the mean time I used the .me smtp server settings which allowed me to send mail.

Coping files from G5 to Xserve G4 crashes the server

Similar Messages

Maybe you are looking for