Copy a small version into a larger file - problem with typing

Hi,
I have paste a copy of a Captivat file in a 10px (each side) larger file. Now I got the problem that typing animation is not on the correct place. Take a look:
the original:
the pasted version in the 10px larger file:
Is this a known problem? Is there a way to fix this?

Hi there,
I would suggest that you use a screen capture utility such as Snagit to capture your Request Membership box and then insert this into your Captivate slide as an image. This will then enable you to accurately position the graphic and should address the typing problem.
Best - Mark
Visit the macrofireball blog

Similar Messages

Airport Extreme, Airdisk, and Vista - large file problem with a twist

Hi all,
I'm having a problem moving large-ish files to an external drive attached to my Airport Extreme SOMETIMES. Let me explain.
My system - Macbook Pro, 4gb ram, 10gb free HD space on macbook, running latest updates for mac and vista, external hard drive on AE is an internal WD in an enclosure w/ 25gb free (its formatted for pc, but I've used it directly connected to multiple computers, mac and pc, without fail), AE is using firmware 7.3.2, and im only allowing 802.11n. The problem occurs on the Vista side - havent checked the mac side yet.
The Good - I have bit torrents set up, using utorrent, to automatically copy files over to my airdisk once they've completed. This works flawlessly. If i connect the hard drive directly to my laptop (macbook running bootcamp w/ vista, all updates applied), large files copy over without a hitch as well.
The Bad - For the past couple weeks (could be longer, but I've just noticed it recently being a problem - is that a firmware problem clue?) If i download the files to my Vista desktop and copy them over manually, the copy just sits for a while and eventually fails with a "try again" error. If i try to copy any file over 300mb, the same error occurs.
What I've tried - well, not a lot. The first thing i did was to make sure my hard drive was error free, and worked when physically connected - it is and it did. I've read a few posts about formatting the drive for mac, but this really isnt a good option for me since all of my music is on this drive, and itunes pulls from it (which also works without a problem). I do however get the hang in itunes if i try to import large files (movies). I've also read about trying to go back to an earlier AE firmware, but the posts were outdated. I can try the mac side and see if large files move over, but again, i prefer to do this in windows vista.
this is my first post, so im sure im leaving out vital info. If anyone wants to take a stab at helping, I'd love to discuss. Thanks in advance.

Hello,
Just noticed the other day that I am having the same problem. I have two Vista machines attached to TC w/ a Western Digital 500 gig USB'd. I can write to the TC (any file size) with no problem, however I cannot write larger files to my attached WD drive. I can write smaller folders of music and such, but I cannot back up larger video files. Yet, if I directly attach the drive to my laptop I can copy over the files, no problem. I could not find any setting in the Airport Utility with regards to file size limits or anything of the like. Any help on this would be much appreciated.

Large file problems with an external FAT32 formatted drive (solutions???)

I have an external hard drive that was from my PC and formatted as NTFS so it was read only on my Mac. I formatted it to FAT32 so that I could read/write to it from both my Mac and PC.
Now, because it is formatted FAT32, I can only have a 4GB max file which has proved to be a pain to me. Is there not a format that satisfies both platform with unrestricted file sizes?
Thanks in advance.

Well, the answer is: not easily.
NTFS, EXT2, and Mac HFS can all be read and written by Windows, Mac OS X and Linux, with appropriate software. You should probably settle on what you are going to use most, and use that as your preferred filesystem.
For example, if you were going to use the Mac mostly to deal with the disk, format the disk using HFS+. On Windows, buy MacDrive and install it to read/write the Mac-format disk. If you are going to use Windows most of the time, then install MacFUSE and NTFS-3g on your Mac (http://code.google.com/p/macfuse/). et cetera.
There's nothing in the way of a really good cross-platform filesystem. ZFS may eventually become that (one might hope), but that's still not quite there.

Large file folder with question mark is flashing on screen.

Just turned on computer for the first time and a large file folder with a question mark is flashing on the screen. I am unable to do anything and have restarted and it does the same thing. Please help!

It does this when it can't see the operating system. You didn't give much information but I'm assuming it's a brand new mini and you aren't using any external drives for the operating system. If that's the case then yes, reinstall OS X. Put your install DVD into the optical drive and reboot. As soon as you hear the chime, hold down the "C" key on your keyboard (or the Option key until the Install Disk shows up). That will force your Mac to boot from the install DVD in the optical drive.
If reinstallation isn't possible, or if the problem continues after reinstallation, then you need to exchange it for another, because something is keeping the operating system on the drive from being read.

Chrome versions 21-26 show severe problems with flash deep links

Dear Madam or Sir,
New Chrome versions (at least versions 21-26) produce severe problems with Adobe Flash concerning deep links.
You will find test cases and detailed information on this subject here:
http://www.in-tanz.de/test-chrome/test.php
Since August 2012 all new versions starting from version 21 to 26 (at least 32-bit Windows) do no longer support for example deep links into Flash. I.e. links like:
poly-9.php#two
It does not matter, what deep link you want to jump to (two, three, four etc.), Chrome always starts with „one“ / at the beginning of the Flash-animation.
Like all other browsers (I successfully tested: Opera, Safari, Firefox, Internet-Explorer) Chrome should jump directly to the deep link #two, #three, etc.
It does not matter which flash player I have been using over the last 9 months (at the time 11.6.602.180).
This is a major problem as only my website contains more than 14,000 Flash files with over 100,000 deep links.
In fact, I reported the bug (first noticed with Chrome 21) to Google beginning October 2012 (see bug reports on my page http://code.google.com/p/chromium/issues/detail?id=154494). But recently, I got the feeling, that there seems to be little interest in solving this problem. Actually, after I had informed Google about it, they even rolled out new versions of Chrome containing the bugs, instead of repairing it.
Do you know any work around or can you offer any help?
Kind regards,
in-tanz

Chrome uses a proprietary build of the plug-in called "PepperFlash" because it's a PPAPI plug-in where the ActiveX and standard plug-in are NPAPI. That may have something to do with it.

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

Bat file problems with 5.2(3)

I'm having bat file problems with CCM 4.2(3) with bat version 5.2(3). When adding phone/users getting an error number -2146828279 with this message "Description -Subscript Out of range".

Hi Denis,
Just wanted to know if the description contained a comma? There was a bug in a previous BAT version that would affect phone/user inserts if there was a comma.
CSCsb61425 Bug Details
Headline BAT insert fails if phone description contains comma
This was in BAT 5.1.4
Hope this helps!
Rob

Anyone know if the long standing duplicate files problem with File History has been fixed yet?

There are loads of public threads about the duplicate files problem
with Windows 8/8.1 File History backup system.
From all the threads I've looked at, there seems to be no solution,
and no acknowledgement from MS that they can even repro the problem
(which surprises me considerably as there are so many people who
notice the problem).
Is anyone aware of whether MS (may) have fixed this for Win10?
Are MS aware of the problem and if they're able to fix it?
Dave - with many GB of duplicated files in File History :)

Hmm, is that the attitude MS would recommend? :)
Why would I care what Microsoft would recommend?
Clearly you don't, and you appear to have missed my smiley. Calm down
Noel, many of us are as annoyed by aspects of modern Windows as you
are. :)
I'm all about making Windows actually WORK/./
Aren't we all? Windows is software I use too many hours every day, I
along with many millions of others need it to work really well. You
are not alone.
When they implement something that doesn't work, and even if it did work doesn't do what's needed - and/beyond that/ they remove features people DO need (such as the GUI for Windows Backup), I see no wrong in advising people of the way things
really are.
File History essentially does work - it's saved me a couple of times
in the past couple of weeks. It just has a highly annoying habit of
creating 100% duplicates of some files for no apparent reason. If MS
have fixed that I won't have any known complaints about it.
If you don't like it, you don't have to use it. I generally like it, I
just want to see that its fixed.
Dave

Copying large files problem in windows 7 x64 professional

Hi!
I'm new to this forum and I recently installed windows 7 professional without too much trouble in my pc. The only thigs that doesn't work are the quicklaunch buttons (which I'm expecting HP to release it until october 22). The system is functioning ok, but I discovered a very serious problem when tranferring large size files (copy or move function) to an external source (in my case a external HD: model Western Digital My book 1 TB connected via USB).
When I try to move a file that is larger than 1 GB the system during the process gets slower and slower rendering my system useless unless I cancel the process and restart. This only happens when moving files from my notebook to my HD.
I've been doing my homework and I checked microsoft technet forums, here's what I found:
1.It seems a lot of people have this problem, in particullar the ones with an asus motherboard (which I know this isn't the case). But in my case since I don't know which motherboard my notebook has, I can't come up with a solution to this problem.
2. It seems to be a particullar problem with the 64 version of windows.
3. The users claim that the problem was solved when they upgraded the chipset, which I somehow tried but with the current vista drivers, but the problem wasn't solved.
4. Some users claim that by using other software like teracopy or grant full permission control seems like a workaround to this, but no in my case. It doesn't work.
5. With sisoft sandra I managed to get my motherboard from this notebook but with no luck finding information or upgrades to a Quanta motherboard.
Here are my system specs (link to the HP site describing it):
Model: HP pavilion 6950la
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01470050&lc=en&dlc=en&cc=us&lang=en&softwareitem=ob-55781-1&os=2100&product=3753762
Windows 7 professional x64
I'm worried about this and it seems weird to me that no one who has tried windows 7 professional x64 has mentioned this in the forum (or even mentioning it), because I think this is a really serious issue and I would like to make sure it gets known and hopefully solved during these days. I really don't want ot get back to vista just for this. And I hope my post will be useful to the HP people so they can get around this problem.
Thankd in advance, will wait for your answers.

Please repost your inquiry in the Microsoft Windows 7 Performance Forum.
Thank you!
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

How do I embed a small video into a larger video screen?

Adobe Premier Elements 10 for a MacBook Pro Mountain Lion OS 10.8.5
For my ski club, I'm making a short single 3 min video with footage from 3 different camera's. The video frames from one camera are 320 px by 280 px and the frames from the other two cameras are 640 px by 480 px and when shown full screen on a monitor, the footage from the two 640 px by 480 px cameras look OK (if not great) but the footage from the 320 px by 280 px is obviously grainy. I would like to embed the smaller into the larger at 50% so that the picture will be sharper, even though just filling up half the screen. Help please. This is for the upcoming ski show and I need it by Sunday, Oct 20. Thanks. DRThiess

DRthiess
With your Premiere Elements 10 Mac,
a. have you set your project preset for NTSC DV Standard
b. have you imported your 640 x 480 video into this NTSC DV Standard project via Get Media/Files and Folders and now have it on Video track 1.
c. have you then imported your 320 x 280 into this same project and placed it on Video track 2 above the Video track 1 content
d. have you then scaled the selected 320 x 280 on Video Track 2 using either
....Properties Palette/Motion Panel expanded and its Scale slider (check mark next to Constrain Proportions)
or
....Click on Monitor to bring up the bound box of the image and then clicking and dragging on one of the handles of the bounding box to scale the image
There are also some PiPs (Picture in Picture Effects) under Edit Header/Presets that you might want to explore. They are for 25% and 40%, but are adjustable.
Please let us know if any of the above worked for you or if you need supplemental information.
Thank you.
ATR

Hello , how could i insert some content into a large file?

hello , how could i insert some content in a large file? ----just like a txt editor do.
assume that i have a 6G file(i think it large enough), then i wann insert one ascii character at the begining of the file,does that means:
1> i need create one 6G+1byte new file, then copy all content of the original file following by that addition character?
2> not creat new file,just set original file length to 6G+1byte,then offset all 6G byte by one byte,after all adding my one character?(it seems not some kind of optimization ...)
what should i do?
Edited by: littleJohnny on Jan 16, 2008 2:03 AM

could some means can set the read hint of 6Gbyte content after my character first read out? ----just let my addition point to the begining of 6G original content ,then the addition character take the place of the file header? ----the inster may be the same....
i just think the already used txt editor seem so fast to process insert, replace .... 2M 10M maybe.... does they doing those operation use Java Type ---String? ------read all contet into memory,then it is easy to regular expression ,relinking read order....-----does it mean large file couldn't against with pattern?
does all ctrl+s shortcut-----rewrite original file with memory relinked order? then large file could not easily manipulate its structure but all structured file is large than plain format...
just teach me some "already used txt editor " trick,thanks very much.

Small NCP packets for large file read

I am running the lastest 4.91sp4 client and am getting really slow
performance through a application called bimap which reads and processes
large map files. When these files are on a Netware server (OES or 6.5 NSS
volume), Ethereal shows that NCP read requests are for only 512bytes and
then an NCP read OK is returned with 512bytes worth of data. This takes
the program several minutes to read the file and process. When the same
files sits on a Micrsoft Server Ethereal shows bursts of TCP packets all
with 1500bytes of data, resulting in a much faster load.
LIP is turned on and seems to work OK when copying files around NetWare
server, I see the bursts of 1500bytes of data, but doesn't seem to work
when using this bimap application. Any ideas?

Hi,
Sasha wrote:
>
> Their not on the same segments, the routers are all correct according to
> our Networks team. Ethereal definateley shows the NCP read request as
> 512Bytes. Other applications such as Word opening large files are OK from
> same PC, Ethereal shows NCP request of 4096. Once again using the Bimap
> app and reading the same files stored on a Microsoft Server works OK as
> well. My understanding with LIP is that the large packet size will try and
> be negotiated, if it fails it reverts to it's default of 512. I assume it
> is failing and I don't know why?
It sounds like the application is specifically reading 512 byte
fragments on purpose. The fact you see bigger reads on Windows is likely
because on windows oplocking (caching) is enabled, but isn't on Netware.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Large File problem

Hi!
I have a swing application that must be abble to open a large file (4.8 Gb). But when i precess the file it is incomplete.
I think the system memory is not enought for open the file.
There is some way to know if a file must cannot be opened correctly? (some way to know the free system memory)
Or there is a way to open very large files???
Thank you

Might it be, you are using somewhere an int instead of a long for file positions?
Holding the entire file in memory makes no sence.
You might try java.nio for file to memory mapping.
And you might utilize java.util.zip to compress file parts on the fly loading them.
The java switches -Xms and -Xmx might further help out.
Your application could use soft and weak references to allow for memory-low cleanups.

Large file uploads with jersey client

Hello All,
I am getting heap spcace iissue while uploading large files via jersey client , the jvm will run out memory
Can any one help me in understanding how can i send large file about 300mb
via jersy client.
code that i have wriiten is:
WebResource webResource = client.resource(url);
MultiPart multiPart = new MultiPart();
FileDataBodyPart filePart = new FileDataBodyPart("file", file,
MediaType.APPLICATION_OCTET_STREAM_TYPE);
multiPart.bodyPart(filePart);
multiPart.bodyPart(new FormDataBodyPart("code", code));
ClientResponse response = webResource.type(MediaType.MULTIPART_FORM_DATA).post(ClientResponse.class,
multiPart);
Thanks

Thanks for ur reply but i have tried it by using
client.setChunkedEncodingSize(10000);
WebResource webResource = client.resource(url);
          // file to multi part Request
          MultiPart multiPart = new MultiPart();
          FileDataBodyPart filePart = new FileDataBodyPart("file", file,
                    MediaType.APPLICATION_OCTET_STREAM_TYPE);
          multiPart.bodyPart(filePart);
          multiPart.bodyPart(new FormDataBodyPart("code",code));
          ClientResponse response = null;
               response = webResource.type(MediaType.MULTIPART_FORM_DATA).post(ClientResponse.class,
                         multiPart);
Now the file are easily send in chunked but the problem is i am not able to receive value of code now..
On the other server where i am sending this file along code is:
public void upload(@RequestParam("file") MultipartFile uploadedFile,
               @RequestParam("code") String code,
               Writer responseWriter) throws IOException
}

HT201210 can I return to previous iOS version. have ios7 but having problems with music files since upgrading

Is it safe to return to previous version of ios. I have updated to iso7 but now having problems with music greying outl on my ipad

Sorry, no Apple does not support downgrading

Copy a small version into a larger file - problem with typing

Similar Messages

Maybe you are looking for