Copy Access Rules from 3.8 to 3.9 system

I'm creating a new BM 3.9 server and want to import my current Access
Rule from my 3.8 system into the new 3.9 system. Is it possible? How???

Craig Johnson wrote:
> Did you apply BM 3.9 sp1?
>
> If so, did you (or did you need to) reinstall the SP1 plugins for
> iManager?
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
No I didn't reinstall the BM 3.9 SP1 plugins. I'll try that tomorrow.

Similar Messages

Error while copying Update rules from One Cube to other

I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Copy Update Rule from Business Content

Hi All,
Currently I have activated some standard BI Content E.g. InfoCube 0FIAR_C03, DSO 0FIAR_O03, InfoSource 0FI_AR_4 and all the corresponding update rules.
Now I have copied both InfoCube and DSO into another customized version E.g. ZAR_C03 and ZAR_O03. I managed to copy the same update rule from InfoSource 0FI_AR_4 to ZAR_O03 using the template but I don't have the option of copying the same update rule from ZAR_O03 to ZAR_C03 using the same update rule of 0FIAR_O03 to 0FIAR_C03.
I know I have the choice to manually re-create all the details but is there any other workaround?
Please read through carefully my question. I have seen some forum asking to load data from 0FIAR_O03 to then ZAR_O03 then so forth.
Purpose of doing the above method is because I want to remain the business content as what it is and just to copy it to Z version for customization.
Thanks
David Yee

Hi All,
Is there any other second opinion related to this issue before I close the question?
Thanks
David Yee

How To Copy/Access Files From Finder To iCloud?

Is there a way I can quickly copy files from my Finder window directly into iCloud without having to drag and drop into the web browser window? I like to use my apps in full screen as much as possible and unless I've missed a shortcut of sorts, I have to go through the process of exiting full screen for the purpose of having to drag and drop the files?
I tried Command-C to copy and then paste but that didn't work. My preference would be to have full access to my iCloud files through the finder window. Did I miss a setting in Finder Preferences?
Thanks

This is the closest I've come but it doesn't allow you to copy files to the folder in the sidebar:
http://hints.macworld.com/article.php?story=20120814000425637

Copy Mail Rules from Mac Pro to Macbook Air in Mavericks 10.9

Hi All-
I have a Mac Pro running Mavericks 10.9 and a Macbook Air also running 10.9. I have set up a very detailed set of rules for organizing my incoming email on my Mac Pro that I would also like to use on my Macbook Air.
Details:
Mac Pro - Mavericks 10.9
Macbook Air - Mavericks 10.9
Application - Apple Mail
Mail setting use IMAP on both machines
iCloud used to sync everything else on both machines
Is there a way to copy the mail rules I have set up on my Mac Pro to my Macbook Air?
Thanks in advance!

William-
I checked iCloud "Documents & Data" / Options and I see Preview and iMovie in there but nothing about Mail.
Do step by step instructions exist anywhere? Seems like a handy feature in Mavericks but I can't find a peep about it.
Thanks!

Copy Distribution model from non changeable client to new system

Hi EDI-Experts,
Help me.
How can I easily copy a distribution model from a nn-changeable client to w new system.
Example: DEV client 110, Test client 150 (with valid distribution model), new syste, QAE,cleint 200
How can I transport the distribution model from client 150 of DEV system to 200 of QAE system.
How does the generation of the partner profiles work then?Anything to consider?
!! Client 150 of DEV is not changeable !!
Many thanks
JW

Goto Transaction BD64.
In the Menubar Edit -->Model View --> Distribute
Transport
U have the option of distributing ur Model view to another client.
Hope this helps.
Regards,
Mithun
Edited by: Mithun Shetty on Jul 16, 2008 8:33 PM

Error while copy of Update Rules from ODS 0SD_O03 to InfoCube 0SD_C13

Hi all,
I work on a NW04s SPS9 System I would like to simply copy Update Rules (from an ODS to an InfoCube) from the BCT to the 1:1 Z-Copies of these Objects.
To do so, I copied the InfoProviders 0SD_O03 and 0SD_C13 to Z-Versions. In SAP BCT the InfoCube is updated from the ODS. The ODS itself is updated from InfoSource.
After successfully copying the two InfoProviders as next step I tried to copy the Update Rules from the Content version Objects to the Z-Version Objects to link them.
Similar to copying update rules in 3.5 I tried
- right click on "ZSD_C13"
- choose Additional Functions - Create Update Rules"
- choose DataSource: ODS Object "ZSD_O03"
- choose Copy from: InfoCube "0SD_C13"
This result in the error "0SD_C13 is not suitable as a template for copying update rules".
Some hints that might help:
1. The very same error occurs if I try to copy the Update Rules from 0SD_O03 to 0SD_C13.
2. I also tried to copy both Update Rules (to C12 & C13) on a BW 3.5 system where it worked fine: The update rules from both Z-ODSs to both Z-Cubes were copied correctly 1:1 and without any errors.
3. In the NW04s System I was able to copy the Update Rules from the InfoSource 2LIS_11_VAITM to 0SD_O01 (as well as from 2LIS_11_VAHDR to ODS 0SD_O03). So I only cannot copy Update Rules from ODSs to InfoCubes while it is possible to copy Update Rules from InfoSources to ODSs.
4. During copy of 0SD_O03 the system warned: "InfoObject 0FISCVARNT needs to be in key for DataStore object ZSD_O03". No matter whether I move this IO to the keys of the Z-ODS, the Update Rules copy does not work.
- This warning does not show up on BW3.5 when I copy the very same ODS. Can anyone explain this?
- This warning is not displayed during the copy of ODS 0SD_O01, just for 0SD_O03.
5. Obviously during a preceding test I actually must have been able to copy the Update Rules for another copy of 0SD_C13 (as I can see the Update Rules in the SAPGUI). I stopped this first test as I was not able to do the Update Rules copy for 0SD_C12.
Yet as of today I cannot copy Update Rules this for both cubes 0SD_C13 as well as 0SD_C12. So yesterday there was no error on copying the Update Rules to InfoCube ZSD_C13, but today there is. To my knowledge nothing has been changed in the System Setup / Customizing in the mean time.
6. For both cubes ZSD_C13 as well as ZSD_C12 it is possible to copy Update Rules that map from the BCT ODS to the Z-InfoCbes. So I can copy Update Rules from 0SD_O03 to ZSD_C13 and from 0SD_O01 to ZSD_C12. This would point in the direction that the copied ODSes are the source of this behavior?
I am not sure whether this is a special NW04s behavior and how to use it correctly so the Update Rules can be copied.
Please could you help on how to copy these Update Rules in NW04s or share your experience if you had similar?
Thanks a lot,
Werner

Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps...

Problem with nat / access rule for webserver in inside network asa 5505 7.2

Hello,
i have trouble setting up nat and access rule for webserver located in inside network.
I have asa 5505 version 7.2 and it has to active interfaces, inside 192.168.123.0 and outside x.x.x.213
Webserver has ip 192.168.123.11 and it needs to be accessed from outside, ip x.x.x.213.
I have created an static nat rule with pat (as an appendix) and access rules from outside network to inside interface ip 192.168.123.11 (tcp 80) but no luck.
What am i doing wrong?

Command:
packet-tracer input outside tcp 188.x.x.213 www 192.168.123.11 www detailed
Phase: 1
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 2
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   192.168.123.0   255.255.255.0   inside
Phase: 3
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0x35418d8, priority=500, domain=permit, deny=true
    hits=1, user_data=0x6, cs_id=0x0, reverse, flags=0x0, protocol=0
    src ip=188.x.x.213, mask=255.255.255.255, port=0
    dst ip=0.0.0.0, mask=0.0.0.0, port=0
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: inside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule

Copy Transfer Rules

Hello,
Can any body tell me how to copy transfer rules from one source system to an other for same datasource.
eg: Material Attr from R/3 DEV and R/3 QA systems into BW DEV system.
Any help is greatly appreciated.
Thanks,
Srini

Hello Srini,
as far as I know, this feature is not available. If I have to do the same, I use 2 sessions. The first one with the template (to copy from) and the second with the new transfer rules. But this works only, if the structure of the datasource in both systems is exactly the same. You can also use the meta data repository to copy from. Here you will also find the coding of the start routine as well as the coding for each infoobject.
regards
Siggi

CCP site-to-site VPN using access rules

hello, I use CCP for creating site-to-site VPNs on a Cisco router. I need to use network objects on my ipsec rule for having multiple hosts but the network objects are only available on the access rules through access editor.
On the encryption domain dialogue on site-to-site VPN wizzard the access rules I have created from Access Editor window are not listed. Should I associate the rules with the interface to be listed???
I manage to create a VPN using an access rule by just inserting the access rule (that is not associated to any interface) number, - it wasn't listed on the access rules when I clicked select from the existing rules - the VPN worked but then another issue came up.
The issue is that when I created a second VPN the way I described above the public IP of the router is unreachable. No ping/ssh etc. I recover it by shh on private and reload with the old config. While the public interface seems down the VPNs I have already configured are up and running.
Though the router is going down when a new s-to-s VPN is created by using an access rule if I create a VPN with the way is shown on the image below everything works fine.
http://www.cisco.com/image/gif/paws/112153/ccp-vpn-asa-router-config-24.gif
but with that way I cannot have multiple hosts for my VPN.

hello guys, can anyone help me on this?
for using network objects on the encryption domains of a site-to-site VPN I have to create access rules from access editor on CCP and associate them with the interface that the vpn will take place. In the encryption domain dialogue of the VPN wizzard i will have to choose them from the existing rules on CCP. Is this right?
I did it without Network Objects. By creating those access rules I was messing with the allowed traffic.
So I assigned more than one ipsec rules for each tunnel.

Copy url's from access rules

I have bm 3.8 sp5 running and I need to copy the urls that are typed into one of my access rules. I would like to be able to copy and paste them into wordpad or something else. I can't seem to find anyway do to this, does anyone know how.
Thanks

gnickle wrote:
> I have bm 3.8 sp5 running and I need to copy the urls that are typed
> into one of my access rules. I would like to be able to copy and paste
> them into wordpad or something else. I can't seem to find anyway do to
> this, does anyone know how.
> Thanks
>
>
you can export them to a file directly with acldump.nlm
tid10086642

I have an old user name tht is no longer accessible. I access fierfox through a new user name. I have copied the profile from the old user name. Can I have 2 profiles from which to choose when using firefox in the under the new username?

I have a user name on my computer that was tied in with the domain name of the server at my workplace. I would access Firefox under this user name. I have now changed jobs, and for good and obvious reasons can no longer utilize my previous company associated username.
I have set up a new username on the same computer. When I access Firefox, all of my old bookmarks are gone, because Firefox does not recognize me under the new username as the same person. In the meantime, I have established new bookmarks under the new username.
I have copied my profile from Firefox under my old username. Can I have two profiles under my new username and pick which one I want to use at that time when accessing Firefox?
I am running Windows 7 Professional, with 4 gig ram, Intel i3 CPU, 2.13 GHz, 64 bit operating system, Firefox 7.0.1
Thank you

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Error accessing Business Rules from EAS

Hi,
I am using EPM System 11 and trying to access Business Rules via Essbase Adminstration Services Console (EAS). When I open up the Business Rules node from Enterprise View, and select Repository View > Rules, a list of all the Business Rules is displayed. However, when I try to click on one to open it in the editor, I received an error message from EAS the reads:
Business Rules Error. Error creating DBUserGrpObjLinkTable. Cannot continue.
When I click Get Detail, it just displays Detail: null. This occurs when trying to open any of the Business Rules. In the past I have had no problem creating, editing, and launching business rules from EAS.
I am still able to successfully launch the Business Rules I have already created and assigned to my Planning application FROM the Planning Web Application, but I am not able to edit them or create any new ones in EAS. Does anyone know what has happened to cause this error? It appears as if something happen to the one of the tables in the relational database that was configured during the installation of the EPM system? I can provide more detail if necessary. Thank you.

I have restarted the services and that did not solve the problem. This may be a stupid question, but I'm not exactly sure who I would contact at Oracle about this problem. Can someone tell me where I should look for this?
Also, I have a bit more information from the logs that may be helpful in solving this. Here is an excerpt from the hbrserver.log:
2009-12-09 03:28:10,656 WARN main com.hyperion.hbr.core.AccessControlManagerServer - HBR repository is not configured. HBR will not be available.
2009-12-15 10:25:02,656 FATAL http-10080-Processor4 com.hyperion.hbr.core.AccessControlManagerServer - Error creating DBUserGrpObjLinkTable. Cannot continue.
It appears that the HBR repository is not configured? I am confused because Business Rules were working fine just last week, and I'm not sure what has changed. Also, I can still successfully run Business Rules from Planning. Any ideas on how to fix the repository? Thanks.

Unable to access to Business rules from planning

HI all,
We are using Hyperion Planning 9.3.1, Essbase 9.3.1 and AAS 9.3.1.
Unfortunately, we are not able to access to business rules from planning.
All rights are set properly, the business rules are visible through AAS 9.3.1 and are accessible from all locations.
When we go to tools/business rules and select the database, we are not able to see any business rules.
If someone has any idea, it will help us a lot,
Thanks for reading this post, guys.

Thanks for your help John,
Unfortunately, we do not have the directory \HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes\.
We tried to put the file in the directory \HyperionPlanning\deployment\tomcat\HyperionPlanning\webapps\HyperionPlanning\web-inf\classes\
But it still doesn't work.
For your information, we are currently using TOMCAT as web server.

Copy Member Access Profiles from the Test to Prod region

Is there a way to copy the Member Access Profiles from the Test region to the Prod region? We have updated all the profiles in the Test region for user testing and would like to copy them to Prod to avoid having to update all the member access profiles.

There is no "out-of the box" method for such a need. But if you study the tables in SQL, assuming you are using the BPC for Microsoft version, you may be able to copy the table contents from one application to another. Keeping in mind that Member Task profiles are at the application set level, and Member access to data is at the Application level.
Hope this helps.

Copy Access Rules from 3.8 to 3.9 system

Similar Messages

Maybe you are looking for