Copy all files in Flash to FTP or TFTP server
Is their a way to copy all the files at once in a router's flash to a FTP or TFTP server? Thanks.
No. On a switch you can create a tar file containing all the files and upload that one file but on routers you can only extract them. You will have to write some sort of wrapper with a chat script to do this. Sorry I don't have better news.
HTH pls rate!
Similar Messages
-
Can't copy all files from a CD-R
I have a number of CD-Rs of family photos. I made the disks on a Dell PC with a horizontally mounted CD-RW Drive in 2005. I recently tried to load them onto my iMAC, but I could only copy about half of the files before the drive hung-up. The drive would often make noise and then slow to a near inaudible crawl and then say the file(s) could not be copied.
I was able to copy the missing files to a memory stick at a local library on an HP PC with a horizontally mounted drive, so the disks are OK. Interestingly, I had trouble with the disks at a library with iMAC-like HP PCs, i.e., all-in-one monitor/pc/optical-drive with a vertically mounted drive.
Other drive-related problems: (1) friends have trouble playing Audio CD-Rs I've made for them, (2) I can't copy a DVD-R with MackTheRipper (PowerPC), the DVD-R plays fine.
Is this a drive issue, a drive orientation issue, or something else?
Thanks for your help.Hi all. I am trying to copy all files from a flash: on a CME to a
usbflash drive. I am able to do so, but only one at a time. Is there
a away to copy all files at one time so I dont have to name them
individually when copying all of them over? Thanks.
Check out the below link hope to help !!
https://cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
Ganesh.H -
How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another
ditto
DITTO(1) BSD General Commands Manual DITTO(1)
NAME
ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
ditto [-v] [-V] [-X] [<options>] src ... dst_directory
ditto [-v] [-V] [<options>] src_file dst_file
ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ...
dst_directory
ditto -h | --help
DESCRIPTION
In its first form, ditto copies one or more source files or directories
to a destination directory. If the destination directory does not exist
it will be created before the first source is copied. If the destination
directory already exists then the source directories are merged with the
previous contents of the destination. -
IN Premiere Pro CC how can I group copy all files in time line to another part of the time line
How can I group copy all files from one part of the timeline to another part
From the Premiere Pro manual (I believe track targeting matters, too. That is, the targeted tracks only are copied):
Copy command enhanced to operate on a range in a sequence
The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard. -
HT4972 do I need to copy all files on my iphone to update from 4.3.3 to 6.3
do I need to copy all files on my iphone to update from 4.3.3 to 6.3
Read the instructions in the article from which the statement was posted.
-
Copy All Files From Folder1 To Folder2
I need a powershell script that will copy all files (not shortcuts, omit those) from folder1 to folder2. The files are various types ranging from file folders (will want the contents of the folders copied as well) to .xlsx, .docx, .tiff, .jpg etc
(and more).Hi,
You can check the repository if you're looking for prewritten scripts:
https://gallery.technet.microsoft.com/scriptcenter
If you don't find what you need and you can't write your own, you can request a script here:
https://gallery.technet.microsoft.com/scriptcenter/site/requests
If you want to try to tackle this problem on your own, I'd suggest looking into Copy-Item or just using robocopy.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Copy all files and renaming them
Hi
My SQL script needs to copy all backup files in a folder to another one while renaming them at the same time by adding the time stamp like this: Originalfilename[Timestamp].bak
Basically the script looks like this:
declare
@cmdstring varchar(1000)
declare
@filenamestr varchar(100)
set
@filenamestr =
CURRENT_TIMESTAMP
set
@cmdstring =
'copy \\Webserver\BackupStorage\SQLbackup\*.*
\\Webserver\BackupStorage\SQLbackupArchive\'
exec
master..xp_cmdshell
@cmdstring – this part is not complete
What code needs to be added to rename each file during the copy process?
PatrickSET NOCOUNT ON;
declare @sourcepath varchar(1000) = 'C:\temp\',
@destinationpath varchar(1000) = 'C:\MyFiles\'
CREATE TABLE #FileList
FileID INT IDENTITY(1, 1)
,Line VARCHAR(512)
CREATE TABLE #temp
isFileThere BIT
,isDirectory BIT
,parentDirExists BIT
CREATE TABLE #output
result varchar(500)
DECLARE @Command VARCHAR(1024)
, @RowCount INT
, @counter INT
, @FileName VARCHAR(1024)
, @FileExists BIT
SET @Command = 'dir '+@sourcepath+' /A-D /B'
INSERT #FileList
EXEC master.dbo.xp_cmdshell @Command
DELETE FROM #FileList
WHERE Line IS NULL
SELECT @RowCount = COUNT(*)
FROM [#FileList]
SET @counter = 1
WHILE ( @counter <= @RowCount )
BEGIN
SELECT @FileName = [Line]
FROM [#FileList]
WHERE [FileID] = @counter
SET @Command = 'copy /-Y
'+@sourcepath+'*.txt '+@destinationpath
insert into #output
EXEC master.dbo.xp_cmdshell @Command
SET @Command = 'REN
'+@destinationpath+''+ @FileName +' '+ LEFT(@FileName,CHARINDEX('.',@FileName)-1)+'_rename.'+SUBSTRING(@FileName,charindex('.',@Filename)+1,len(@FileName))
print @command
SET @counter = @counter + 1
IF LEN(@Command) > 0
EXEC master.dbo.xp_cmdshell @Command
END
DROP TABLE #output
DROP TABLE #FileList
DROP TABLE [#temp] -
Finder copy doesn't copy all files
I have a dedicated disk for my Aperture masters, and to back this up while also defragging (according to a method described by Kevin J Doyle and Matthew Bergsma on the Aperture forum) I'm simply doing a Finder copy of the masters. I may have made a mistake when I relocated my masters a few months ago, because I put all 40,000 files in a single directory, at the "root" level of the drive.
I've searched around to see if there is a limit to the number of items in a single directory, and saw guesses but nothing definitive.
The problem is that when I try to copy the files, the Finder shows all 40,000 selected, but only copies 10,000 or so. I can't figure out why. If needed I can relocate the masters again into project folders, but I'm very curious why I'm seeing the partial copy.
RobI've got the same problem when copying multiple large files from the desktop to a network drive on Windows Home Server (using drag/drop). The files are about 1gb each, and if I copy more than one at a time, at least one will dissapear on the target machine. This is VERY repeatable.
When I watch it closely, I can see temporary files for all files appear, and the number of items, and the total size reported in the copy status on the Mac are correct. In fact, it takes about the correct amount of time for the total size copied. However, when the copy is complete, some of the files on the target drive vanish. There is no error dialog, files just go poof. Dragging the missing files again works, as long as no more than one is copied at a time.
A test with a few small files works fine. This only fails with large files. The total copied is less than 2gb, so this doesn't seem to be a FAT32 problem. There is ample space on the destination drive (over 1Tb free). The Mac is on a wireless 802.11N lan.
- Bruce -
I cant copy any file in flash memory
Hello
I have a macbookpro
I update my os last night to new version with my software updator
when i try to copy any file of any directory from my mac to flash memory , external H.D.D or any portable device i cant do that
this problem is whitout error . just this action failedMacs can't write to NTFS formatted disks without a third-party utility. Paragon's NTFS for Mac works well and it's only $20...
Clinton -
Copy/Save file to flash drive
I am trying to create a script where the user can initiate a
download/Save/copy of a stored file from my HDD to a flash drive.
It would seem that baCopyProgressFile would be ideal for this
situation, but I am authoring on a Intel MBP and it does not appear
that Buddy API is compatible with Intel Macs at this time. I only
need this projector to display on this MBP (this is really just a
quick proof of concept project that will be run locally), so any
suggestions or alternatives would be very helpful. Thanks.> By main directory, I mean the directory where the
director project resides. I
> would like to copy a movie from this directory to the
root of the flash drive
> directory.
I'm still not understanding you. You want to copy a file from
the
directory where the projector is, or a sub-directory?
If you want to copy from a sub-directory, try something like:
on mouseUp me
tSource = "@/movies/480p.mov"
tDest = "/Volumes/bb/480p.mov"
OK = baCopyFileProgress(tSource, tDest, "IfNewer", "Copying
Movie to
disk...", "Cancel", 0)
if OK <> 0 then alert string(OK)
end
> I updated the code with yours, and now when I run the
movie, it gives me an
> error stating:
> Script error: String expected
> Alert OK
> 5
My mistake. I assumed that when you use 'alert' whatever you
are
alerting is auto-cast to a string. Try the above instead.
> If I adjust the code so that it copies the file from the
projects directory
> and pastes it into the same, then the file will copy
with the progress bar and
> after the copy is complete it gives me the same error
message as above, only
> with a '0' instead of a 5.
If you look in the docs for Buddy API, 0 means the operation
succeeded
and 5 means "Couldn't create directory for Dest file"
(suggesting your
destination path is incorrect)
Since you already use Buddy API I suggest you use a
combination of
baDiskList() and baDiskInfo(disk, "type") to determine which
is your
Flash drive and then use that disk as your root for copying.
For example:
on mouseUp me
lDisks = baDiskList()
lTargets = []
repeat with aDisk in lDisks
if baDiskInfo(aDisk, "type") = "Removable" then
-- found (potential) target
lTargets.append(aDisk)
end if
end repeat
case count(lTargets) of
0: -- no removable drives available to copy to
alert "Drive not found"
1:
tSource = "@/movies/480p.mov"
tDest = lTargets[1] & "480p.mov"
me.mCopyFile(tSource, tDest)
otherwise:
-- more than one removable drive available
-- you'll need to create a routine to determine
-- which one you want to copy to, or present the user with
-- a selection they can choose from
end case
end
on mCopyFile me, aSource, aDestination
OK = baCopyFileProgress(aSource, aDestination, "IfNewer",
"Copying
Movie to disk...", "Cancel", 0)
if OK <> 0 then alert string(OK)
end -
How do i copy all files from my macbook pro to an external lacie hard drive?
Hi,
I need to sell my macbook pro 17" 2007 but want to save all files to an external lacie hard drive. What the best way to do this please?Consider these options...
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
Which create a Bootable Clone of your existing Hard Drive... -
ITL file is missing on my CUCM TFTP server
Hello,
I have a problem on my CUCM cluster : the ITL.tlv files on the TFTP server (on all CUCM are missing).
When i check the file with the URL : CUCM_IP:6970/ConfigFileCacheList.txt i don't see the ITL.tlv the is just :
SEPDefault.cnf 17 1
MTPDefault.cnf 17 0
CFBDefault.cnf 17 0
SAADefault.cnf 17 1
SDADefault.cnf 17 1
lddefault.cfg 55 1
gkdefault.cfg 55 1
SIPDefault.cnf 827 1
XMLDefault.cnf.xml.sgn 8148 7
DefaultFP0000000000-c7a6c673-7479-46b0-839e-014d3d093963.xml.sgn 1863 1
CFBHW-TR.cnf.xml 2893 1
SEP123456789012.cnf.xml 7381 1
SEP0CD996911C3D.cnf.xml.sgn
I try to regenerate certificate on all CUCM, it's not OK.
CUCM version : 8.5.1.15900-4
I have 1 publisher and 2 subscriber.
Can you help me please ?
Best regards.Yes all CUCM and phones are impacted.
There are big problem on my phone, when i restart IPphone, there are :time problem, Softkey problem, URL button, ect... .
All phone are registered on my CUCM SUbscriber1, when i execture show itl, i had a message error, i correct the issue by execute the command 'set web-security' and now when i exectue show itl i have : "The ITL file was verified successfully.".
But i have 6 records :(on my subscriber01)
TVS
TVS
CAPF
TVS
System Administrator Security Token
TFTP
TVS service is running on all CUCM.
I already tried to restart all services and the problem persists -
When trying to copy files from one NAS drive to a second for back up I received an error message that "the operation can't be completed because the item already exists" while in fact the folder has been copied with one or two of the items but not all. The only work around has been to copy each folder individually. Nested folders do not copy either. Makes back up impossible.
The operation can’t be completed because an item with the name “20100401 Images” already exists.
I get this also, just started when I try and copy from a jump drive to an external USB drive. -
Disk Utility not copying all files when making disk image
My OS is 10.6.5 and everything is up to date.
I have a dvd that was burned for me of a play my child was in. It was probably burned on a PC using out of date software for all I know. But it plays in a DVD player and also in DVD player on my Macbook.
I want to be able to share clips of it online with friends, and that has all been just fine importing from the disk image I created of the DVD using Disk Utility, using IMovie 09 to edit it.
HOWEVER when I got to the end of act one, chapter 7 in the DVD is only about 3 minutes in length. The disk image I created using Disk Utility does NOT include any chapter 7 (which happens to be the ending of Act 1) and so I cannot import it into I Movie in order to add it to my mp4.
When I explore the DVD itself with my macbook, it only lists twelve files (various BUP's and IFO's and VOB's etc) -- here they are sorted by file name
VTS022.VOB
VTS021.VOB
VTS020.IFO
VTS020.BUP
VTS013.VOB
VTS012.VOB
VTS011.VOB
VTS010.IFO
VTS010.BUP
VIDEO_TS.VOB
VIDEO_TS.IFO
VIDEO_TS.BUP
Now, when my husband took the disc and created a .dvdmedia file in it and I explore that, there are 14 files. All of the same 12 files plus two more. (The DVD itself has 13 chapters but the main menu doesn't allow you to select them.)
the other two files in the .dvdmedia package are
VTS020.VOB
VTS010.VOB
But I can't do anything with that .dvdmedia file except watch it.
So I'm trying to figure out how to at least grab even just that last 3 minutes from Act 1 either from the original disc or from the dvdmedia file, using Imovie. So far having no luck. Disk Utility leaves it out and it's my only bridge from a burned DVD to Imovie. I've tried creating a DVD master and also an ISO using DVDRipper and that does the same thing. Also if I open the original burned DVD with Finder it only shows me the 12 files not the 14 that show up when using DVD Ripper to create a dvdmedia file.Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine. -
I-tunes copying all files each time ipod is connected
These are my current settings for sync ( checked) :
Sync only checked songs and videos
Enable disk use
Now, each time I connect ipod, the disk is getting cleared and ipod again copies all the songs right from scratch. Just imagine this going on for 50 Gb+ data, each time I connect my ipod.
Am I doing anything wrong here?A reset won't delete data from the ipod.
http://support.apple.com/kb/HT1320
A restore will completely blank everything. Since itune's copying everything over each time you sync, though, I assumed all your content was safe on the PC, so restoring (wiping the ipod clean to factory settings) wouldn't "lose" anything.
Maybe you are looking for
-
Since upgrading to FF 8 tabs will not load websites fast if at all. To get the site to load, I usually have to click reload tab.
-
When I receive an original meeting request from a LotusNotes user, I can select the .ics attachment and it gives me an option to "add to calendar" which will place it on my calendar. However, when I receive a rescheduled meeting notification, I get a
-
On my MacPro, I am using a Bluetooth Keyboard and mouse, but the range is only about 4 or 5 feet. I want to sit on my couch and work (about 10 feet away) but the mouse and keyboard is slow or disconnects.. Is there a way to extend the range? Would
-
ITunes 6.0.2 is unequivocally spyware
As of 6.0.2, iTunes: - Automatically sends data about users' music listening to Apple's servers, without informing the user even at the time that it is doing so, much less giving warning beforehand. - Uses this stolen information for the deplorable p
-
Seeking Expert Advice for Voiceover Recording
I am a beginner and have recorded some VOs. I have the basics down (find a room with few parallel surfaces, porous ones like foam are better still, quiet room etc) I think but I was wondering if anyone had any links to more best practices that can ma