Copy and no copy

Hi Friends....
tell me about COPY and NO COPY.....with eg..
also tell me difference between them
thanx in advance

Check this link for notes about NOCOPY.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2047154868085
COPY is SQL plus command. It's no way related to NOCOPY.

Similar Messages

Difference between Original copy and free copy of application server 10g

what are the difference between Original copy and free copy of application server 10g

Hi,
I think that there aren't free copy of Oracle AS.
If you are a developer or a system architect, you may download Oracle AS for your test.
Mauro

Run the data copy and comments copy with the same key

I want to Run the data copy and comments copy with the same key.
I tried to challenge in the following way, but it is an error.
1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
2. Select the newly can process chain to add a package, make a change to the script as follows:
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%SELECTION_KEYDATE%,)
TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables?

Shallow copying and Deep copying ???

hi,
what is meant by shallow copying and deep copying in context to clone() method found in Object class?
thanks,
swapnaja

swapnaja wrote:
Shallow copying: only cloneable object is copied but any object references within that object would not be copied but would rather be shared.
Deep copying: cloneable object along with any object references contained within that object will also be copied.
Am i right?Yep; when you want to make a deep copy you have to watch out for circular references, i.e. if you have made a copy of an object already you shouldn't make another one during the deep copying process; (see how the ObjectOutputStream does things).
kind regards,
Jos

Copy and paste copy from another document

Hi,
Somewhere I've changed the color type is presented when you create a new text block and can't find where to change it. So everytime I start a new block of text or when I copy and paste from another document (word, email) the copy color has to be manually changed to black to see it. Where do I change this preference?

Thanks for speedy reply. So that fixed my new doc - when I put in new copy it is black. On the previous document, with no text select - click on the text tool and swatch shows it will be black. Draw the box on the layout - swatch switches no color (white box with a red slash). So, I unselect everything again, click on the text tool and it shows it will be black. Click inside the text box and it goes invisible again. Switch to color - click on text tool and it shows it will be black, but as soon as I draw the text box - shows it will be invisible. Shut down Indesign, restart - nothing gives.
Again, thanks for your reply. This isn't major just one of those little annoyances that is so minor with all the other stuff going on ... but with snow leopard problem - I just don't want to mess with too and I can't fix the other. giggle.

Suddenly I cant copy and paste copy/cut/paste is not available in Mozillia and firefox. Never seen this before

I have never seen this before when I try to copy and paste, I get a
"Copy/cut/ paste is not available in Mozilla and firefox. Do you want more information about this issue? "
I have copied and pasted hundreds of times before with Mozilla and firefox . This just happened suddenly.
when I go to find more information on this issue, it give a long drawn out explanation I cant follow.
What happened?

When you right-click the link, the page immediately tells you you can't copy, or does that occur after you choose Copy Link Location?
If it appears immediately, you can switch a setting in Firefox that should prevent sites from blocking the normal right-click menu. Here's how you would do that:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''context''' and pause while the list is filtered
(3) Double-click the '''dom.event.contextmenu.enabled''' preference to switch it from true to false.
This setting does have a complication: On Google Maps and other sites that have their own right-click menu, Firefox's menu then will block the site's menu. To clear Firefox's menu so you can access the site's menu tap either the Alt key or Esc key once (but sometimes Esc removes both).

Problems with sending carbon copy and blind copy with gmail

I recently started using Safari and would like to continue as it is fast. But have problems with it when I use Gmail that I don't have in Firefox or Internet Explorer. For example when I want to forward and email to several people using the blind copy or carbon copy feature - each time I click a name i have to move the cursor back into the box manually because each time you add a name the cursor jumps to the subject line automatically. I forward a lot of email, How can I make using these features work with Safari? Any help is appreciated. Thanks.

I would delete the account on the iPod an recreate the account. It is easy to make an error or enter the setting and hard to find the error.

I can't copy and paste pictures from the web to my email like I could with Explorer?

With IE you can copy a picture from the web and paste in to an email, with Firefox I have not been able to do this?

In Firefox, right click over the image you want to copy and select "Copy Image".
Go to your email application and then right-click and "Paste".
This should work.
I notice that you are using an older version of Firefox, so it might be worth upgrading to the newest version Firefox 6.0.2.

System Copy vs Client copy

Hi,
I have to choose between a copy with or whitout data from PRD system to DEV.
I'm little confused about the difference between System Copy and Client Copy.
Which is that includes a copy of data also?
Then, System copy = Refresh system?
Please, reply me directly, without post link.....
Many thanks.
Claudia

Hi,
Please do an SDN search of these terms.
Also read SAP Note 886102 for all system copies scenarios.
Rgds,
Colum

PLD - How to print 'Offic Copy' or 'Customer Copy' on Docuemnts

While printing various Marketing documents, I need to print a messge saying 'Office Copy' on the 1st copy of the Marketing document and 'Customer Copy' on the second copy of the Marketing document, Is it possible to do this using the PLD??
Thanks!!
Dana

Dana,
The solution I am suggesting is my approach to your scenario.
Create a User defined field in the Marketing Documents ..Title level by going to Manage User Fields window, choose Tools > User-Defined Fields > Manage User Fields.
It can be an alphanumic field.. Check Set Valid Values for Field and define
Office Copy
Customer Copy
Map this field into your PLD template and print.
Alternate Approach.
Is to use the Printed field in the ORDR table to check if the copy of the first copy or Second Copy.
SAP Stored 'Y' on 'N' in this field and the same is available in the PLD .
In the PLD of the marketing document.. Page Header area
Add a Database field from ORDR - Sales Order...Field: Printed
Add a formula field and in the Contents Tab of the Field properties window .. Add formula to Check the Value of the Database Field you Added (Printed) = "Original"
Example: Field_203 == "Original" (suppose field_203 is the printed field you added)
Add another formula field referring to the same printed field (Field_203 == "Copy")
Add two Text Fields with Text "Office Copy" and "Customer Copy"
The the Office Copy text field, add the first formula field (Field_203 == "Original") as the link field and similarly the second formula field to the "Customer Copy" text field.
This way when you print the First time, the marketing document would evaulate the Printed field and Print Office Copy and the Second time onwards it will print customer Copy.
Good luck
Suda

Copy versus Super Copy-what's the difference?

Hello,
Can someone explain what is the difference between "copy" and "super copy" functions in CUCM? What additional parameters will the super copy replicate over what a "copy" will do?
Thanks in advance,
Adil

Hi Adil,
In addition to the good info from my friend Nadeem (+5)
From the CUCM docs;
•To copy an existing phone, locate the appropriate phone as described in "Finding a Phone" section, click the Copy button next to the phone that you want to copy, and continue with Step 5.
•To copy an existing phone and copy the directory numbers, speed dials, busy lamp field/speed dials, and service URLs that are associated with the phone, locate the appropriate phone as described in "Finding a Phone" section, click the Super Copy button next to the phone that you want to copy, and continue with Step 5.
Note The lines that get copied become shared lines between the original phone and the new phone.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/7_0_1/ccmcfg/b06phone.html
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Shadow copy vs deep copy

hi,
any body tell me what is the difference between shadow copy and deep copy of a object.

would you tell me any prectical example of this. i
mean when i should use shallow copy and when i should
use deep copy of object.I'm hoping someone else will step in here, because in my OO thinking, there's seldom a need for copying an object at all.
One practical example, though: Say you're copying a list of objects. After the copy, you want to alter the objects in the copied list, but you don't want the objects in the original list altered. In this case, you need a deep copy. Had you only done a shallow copy, both lists would have referred to the same objects, and therefore, any change in an object would be visible through both lists.
clone() method makes shallow copy or deep copy.You'd have to consult the doc for the class you are cloning. For example, the doc for LinkedList.clone() says "Returns a shallow copy of this LinkedList."

Hi, I was trying to copy and paste a lot of info for one day on my calendar to another day and an error message popped up saying that the system responded with an error. Msg won't go away I force quit ical

Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?

K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality.

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

Copy and no copy

Similar Messages

Maybe you are looking for