Copy and Paste Adjustments Anomoly

I'm using iPhoto 9.3.2, and shoot most of my photos in raw format (Canon CR2). I have just noticed an odd problem when copying and pasting adjustments between raw pic files:
When I make adjustments (exposure, definition, highlights, and sharpness), to a CR2 file, copy those adjustments and then paste them to a different photo, the temp or tint (I can't tell which) of the newly-adjusted photo shifts to a greenish hue. The temp and tint sliders on the newly adjusted picture don't indicate than any change occured, but there is an obvious shift of the colors
If I duplicate the CR2 photo, and pasted the adjustments to it, and get the same color-shifting result (did this since I can easily compare the two photos to each other).
This color shift does not occur when I attempt the same copy/paste of adjustments between jpeg files...
Can anyone out there see if you can duplicate my problem? Is it a known bug?
Thanks,
Bob

Update 1:
If I make any adjustment to the Temperture slider, before doing the cut/paste, the pic I pasted to looks like it ought to... If I make any adjustment to the Tint slider before doing the cut/paste, the pic I paste to gets a green hue.
Noticed that the changes to the hue can be seen in the histogram....
Thoughts?
Bob

Similar Messages

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selection. What am I do

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selected. What am I doing wrong?

Copy and Paste develop settings in Develop mode on multiple photos on the film strip works for me, even with Auto-Sync turned off. Lr5.6 OSx 10.8.5

Copy and Paste Single Color Correction

I'm trying to copy and paste a single color correction to the rest of the clips in the timeline and run into a problem. I've tried to disable the other color corrections before copying but all that does is paste the unchecked correction also. I've tried deleting the other corrections before copying but that likewise deletes all the previous corrections in the clip that I paste to. So in other words, no matter how I configure my color corrections in the clip that I copy from, the exact same configuration is what gets pasted into the paste clip. Surely there is a way to copy a single color correction when dealing with clips with multiple corrections? My protocol is to adjust contrast on one correction, color balance on another and now I want to add a tint to a number of clips with out having to write down the color parameters and individually make the adjustments in maybe 70 or 80 clips. Thanks for any insights. Oh yeah I'm using FCPX 10.1.1

You don't. In the PRIMARY and SECONDARY rooms, you can save grades. Park your playhead on a clip, hit SAVE. Those grades will show up no matter what project you open in Color.
What I do is make folders for every project, and save my shot grades in there. I can then apply it to another project, if I have the need. When working on a reality series, I often have the need.

Can You Copy and Paste Attributes in FCPX?

I'm just getting started with my FCPX training, (after years of edidting in FCP). I frequntly use the "copy and paste attributes" feature in FCP, (say you make some adjustments to a clip, you can copy these attributes and paste them on to another clip). VERY SLICK and USFULL. Does anybody know how this is done in FCPX? Thanks

Similar though you don't have the same level of control as you'll notice. Copy the clip you want to use as the source and then Paste Effects- both from the Edit menu. This will copy over everything so plan things out if you want to use this feature.

How can I copy and paste a clip to duplicate it?

Like the title says, I want to copy and paste a clip so that it can be duplicated in the timeline.

Now, when one has added and adjusted Effects on a Clip, they can Copy those Effects & Attributes, then Paste those to other Clips, either individually, or to many, by Selecting all, where that/those Effect(s), and Adjustments are desired. That is a somewhat similar operation, but does not Copy the Clip - just the Effects and Adjustments made to it.
Good luck, and glad that you are able to Copy & Paste the desired Clip, into another spot on your Timeline.
Hunt

In iphoto 11 the copy and past buttons to the adjustment tab are gone

In iphoto 11 the copy and past buttons to the adjustment tab are gone. I thought this was a cool feature. They still work when you click alt-c or alt-v. Did anyone notice this?

I've noticed too and I don't like it! I tried to alt-c like you said and when I do that, it just takes me to the crop. It won't allow me to copy the adjustments! Is there any way around this??

How to copy and paste a photo in another folder using Aperture?

How to copy and paste a photo in another folder using Aperture?

What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
Regards
Léonie

Does iPhoto '11 have the copy and paste function?

On my old MacBook the iPhoto allowed for the copying and pasting of adjustments, on my iPhoto '11 where the copy and paste option used to be there's nothing.

Terence -
I tried that, but it didn't work .. and I discovered why. The key was in the last word of your sugg's first line: "move." I don't want to MOVE the pic, I want to COPY it to another event, and following your suggs produced this box:
So, with your and the Old Toad's help, I now see I was pounding sand - can't do it! Unless we can get the iPhoto developer gurus to add that capability, we'll have to consider this case ... Closed.
Thanks, guys!

How do you copy and paste an adjustment layer to the center of a new doc?

Hi,
I know I can drag an adjustment layer to a new document, but it's never in the center. So I end up with an image with adjustments made, but not across the whole image. Therefore I have to eyeball and properly center the adjustment layer to make sure the adjustment sits in the center and is therefore made across the whole image.
Is there a way, or a shortcut, to do this whole process much easier? For the steps I have to do and hassle, I usually skip copy and pasting an adjustment layer and just re-create a new one.
They have to have made a way to do this, but I can't find the instructions online anywhere!
thanks!
Liz

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

Copy and paste adjustment problem/ possible bug.

Hi all
I have just encountered a very strange problem/ possible bug.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automaticaly becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
Could someone else try to see if this problem exists on their catalogs or if its a corrpution problem my end.

Noted on the bug, thanks.
1762hd wrote:
Hi Geoff
Heres the summary for bug report - please note this bug also affects radial filter/healing brush and crop
Scenario
1 open a portrait raw image in photoshop using render using lightroom (I am using cs5)
2 back in lightroom make a change using the - adjustment brush/ radial filter/healing brush or crop - to the newly created tiff image.
3 copy and paste this adjustment to the original raw file.
problem
all effects are rotated.

Hi, I was trying to copy and paste a lot of info for one day on my calendar to another day and an error message popped up saying that the system responded with an error. Msg won't go away I force quit ical

Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?

K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality.

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter

Cannot copy and paste descriptions in PDF Portfolio

I am using Adobe Acrobat Pro 9.5.1 on a Windows 7 laptop. Since a recent update I am unable to copy the description in a PDF Portfolio and paste it back. I used to be able to copy the description; delete the file; add an updated file and then paste the description back. Now I have to re-type the description. I cannot event copy and paste a description from another PDF portfolio. Can you advise why this is so and is there a workaround?

Adobe does not report the progress of bug reports to the public, nor can I comment on the timescale for any future updates or what they may contain. Priority is of course given to the current Acrobat X Family and recently-announced Acrobat XI Family.
Copy/paste between all the file details fields in PDF Portfolios is fully functional in Acrobat X Pro (which currently has a captive install of Flash Player) and in Acrobat XI Pro (which does not). I don't have an install of 9.5.1 to test your bug report against, but whatever is causing the issue in your case it's not an intentional change.

Copy and Paste Adjustments Anomoly

Similar Messages

Maybe you are looking for