Copy and Paste audio track MIX from one track to another??

Hi
What's the best way to handle this.
I have a video with one long music track, that I mixed using Adobe Premiere's Audio Mixer.
The musician made a new version of the track with some very slight modifications in the music.
Rather than having to remix the entire new track, I would prefer to either:
1) Copy and paste the attributes of the orginal audio track onto the new music track -- retaining the Mix I did from the original mix.  Is this possible?  I tried it once and it did not seem to work.  (I used the Mixer, not keyframes, to do all of the mix.)
or
2)  Is there a setting in Premiere's Audio mixer to "gang" the new track to the old one -- with the new track cloning the old track's mix.
Or would it be better to bring the two audio tracks into Soundbooth and do it there?
Thanks,
...Rowby

Thanks Colin
I did a complicated mix on one long background music track and was not looking forward to doing that remix because of various minor music changes made by the musician scattered throughout that long track.
Your Alt (for replace solution) worked perfectly and saved me a ton of time.
The fact that Copy attributes for Audio doesn't work for copying audio keyframes is another reason do do audio mixes using the Mixer instead of using keyframes to adjust volume.
...Rowby
P.S.   And a big LIKE to Adobe's clever programmers for including features like these.

Similar Messages

  • Is it possible to copy and paste a review quiz from on book into another?

    I have a number of quizzes in an ibook which I have been using as a sand box.
    There are 10 questions in each quiz.
    I have copied and pasted a lot of the material from the trial ibook into a new book.
    I would like to copy and paste the quizzes from the first book into the new new ibook also.
    Is this possible?

    Its possible to make a duplicate of the quiz within an ibook, but I have tried CUT and PASTE but it does not work even though they are both colored black in the menu.
    As CUT and PASTE are colored black, I thought that it might somehow be possible to copy them from one ibook to another.
    I can copy the complete section containing the quiz from the first ibook to the second ibook. If I could then copy the review quiz to the appropriate section in the second ibook, and then delete the copied section, it might work.
    However, it still will not copy and paste the review quiz, only make a duplicate next to the original quiz.

  • How do I copy and paste a gradient color from one document and then use the gradient on another document?

    I am making business cards. On the back of the cards there are two lines with gradients. Below is a card with a magenta gradient. I want to select both lines and change the magenta gradient to the orange gradient from the file below. How do I do this? (I do not want to copy a paste the orange lines and then move them over the magenta ones.) I just want to select the magenta lines and change their color to the orange gradient. This will insure absolute alignment. I want to do repeat the process with several other gradients too. Thank you.

    David,
    As I (mis)understand it, you may:
    1) Copy one orange gradient path to the magenta gradient path document;
    2) Select the two magenta gradient paths and change the Fill to None;
    3) Select the orange gradient path;
    4) Select the two magenta gradient paths and change the Fill to Gradient.
    That should give you the desired replacement. For multiple use of the same gradient, you may consider a gradient swatch.

  • Can no longer drag or cut and paste links or words from one place to another with new Firefox update

    After updating Firefox 19.0.2 to my iMac Desktop 10.8.2, Lion, I can no longer drag or cut and paste anything to anywhere, anymore. Please help. Thanks!

    Does this also happen if you try to copy/cut and paste text in a text area like "Post a Reply" on this forum?
    Try to reinstall Firefox.<br />
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *Firefox 19.0.2: http://www.mozilla.org/en-US/firefox/all.html
    *Trash the current Firefox application (e.g. open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
    *Install the new version that you have downloaded
    *https://support.mozilla.org/kb/Installing+Firefox+on+Mac
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

    In iTunes, is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

    Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
    Finale 2007: $500
    Sibelius 4: $500
    Jam Packs: $400
    Midi Keyboard Interface: $100
    PowerBook: $1700
    Printer for printing scores and analysis: $150
    Logic Pro 7: Oy!
    As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
    Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them.

  • How do I copy the same app folder layouts from one device to another? We have a several iphones and ipads.

    how do I copy the same app folder layout from one device to another. We have several apple devices.
    It's a challenge when syncing a device for the first time to go through all the apps and apply them back to the same folders as on your other iphone.
    I've seen suggestions of taking pictures of the correct layout, then manually applying it to the new device. Big time waister.
    What's the work around?
    Thank you

    I'm afraid there is no short workaround. One thing that you could do if you were REALLY desperate is reset your device to factory settings and then restore it from your other device's backup, but that is rather risky and you probably don't want to take your chances just for folder layouts. I would just do it manually.

  • How can I copy and paste the art work from album covers?

    How can I copy and paste the art work from album covers?

    I don't think the list style transfers. Copy and paste the text in to Mail, select it and then choose "Insert Numbered List" as a work around.

  • How to copy and paste web design styles from the web

    I am not doing so well with the web style templates provided in the latest versions of IWeb.
    Is there a way to copy and paste the html code from some site who's design I like then paste it into my Iweb and then put in my content to the style that was up?
    I used to be able to do do this about 10 years ago with a Claris Homepage program, don't see how to do it with IWeb.
    It's like I have to do everything from scratch, draw background boxes, don't see frames.
    Thanks everyone..
    Jack E.

    Welcome to the Apple Discussions. No you can't copy the code form a site and use it in an iWeb page. To use frames you would use an HTML snippet and this code:
    <IFRAME SRC = "URL OF PAGE YOU WANT TO FRAME" WIDTH="XXXpx" HEIGHT="XXpx" FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>
    You can get more info at this site:iFrame code.
    I've creates a demo site which describes many of the features and tricks I've learned from this forum. This iWeb FAQ site is a wealth of information on using iWeb and all of it's capabilities.
    OT

  • Copying and pasting e-mail addresses from excel

    I have always copied and pasted e-mail addresses from an excel file into the "to" field on the e-mail. This has always worked fine. Now for some reason, if there is a blank row on the excel field between e-mail addresses, when copying over it is now adding commas to the e-mail addresses meaning that the address fails. Something must have changed in my settings but I do not know where. Appreciate any help please

    ''caberryman [[#question-1044192|said]]''
    <blockquote>
    I have always copied and pasted e-mail addresses from an excel file into the "to" field on the e-mail. This has always worked fine. Now for some reason, if there is a blank row on the excel field between e-mail addresses, when copying over it is now adding commas to the e-mail addresses meaning that the address fails. Something must have changed in my settings but I do not know where. Appreciate any help please
    </blockquote>
    Just to add some info, it works just as bad if you copy from your own address-book. If there is a missing line it will show up as an extra comma and the recipient after that comma will fail.

  • When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.

    When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.
    Any help would be welcome

    This is a bug in Mail. The mailbox archiving function does not include attachments, which  gives the error with the import. To workaround this you can create a mailbox in Mail and copy to it all emails you want to export. Then go in Finder to [user]/Library/Mail/Mailboxes en select the created mailbox. Copy this to the public directory of your other mac. Then start Mail on that other mac and import the mailbox from the public directory. Should work now.

  • Copy and paste audio clip and maintain effects and tweaks?

    I created a track on the iPad and transferred successfully to the desktop.
    I then used Melodyne to clean up the vocal track.  Some of the vocal timing was off so i used flex time editing to straighten it out. It's a piece I'd like to loop throughout.
    When I copy and paste the pasted clip loses all the effects and edits and is back to the raw vocal track.
    Is there a way to copy and paste and maintain all of those tweaks?

    Thanks Colin
    I did a complicated mix on one long background music track and was not looking forward to doing that remix because of various minor music changes made by the musician scattered throughout that long track.
    Your Alt (for replace solution) worked perfectly and saved me a ton of time.
    The fact that Copy attributes for Audio doesn't work for copying audio keyframes is another reason do do audio mixes using the Mixer instead of using keyframes to adjust volume.
    ...Rowby
    P.S.   And a big LIKE to Adobe's clever programmers for including features like these.

  • How do I copy and paste text style for multiple video tracks?

    hello,
    I am creating multiple video tracks with text.  I want to easily copy and paste the style, i.e., Font, Color, Size - rather than having to scroll down the giant list of fonts to find the one I want, then change the color, then change the size - each and every time.  This is arduous.
    I tried copy / paste of one text onto a new video track, but when I type in a different word, it alters the original.
    I have 9 tracks of video for 9 different texts that will pop in and out of my video.  I would like to be able to copy/paste then just change the text.  This would save me a huge amount of time.

    paulrudophmusic
    I know of no way to alphabetized the Adobe Styles that come with the program.
    If you had the time and the inclination, you could rename them all to force them to appear alphabetically, but that does not seem all that practical.
    But, if your interest is in the Styles that you save and you do not hit the Reset File List, the new Styles will be at the bottom of the list and you can name them so that they appear that alphabetically at the bottom of the whole Styles list. But that does not address the matter of you having to scroll to the bottom of the Styles list.
    In some instances, some things that you think that you cannot do in Premiere Elements obvious features, can be done by computer keyboard shortcuts. I check the keyboard shortcuts under the Edit Menu/Keyboard Customization and unfortuately did not find any that would be applicable to this situation.
    As for your changes in one text file popping up unwantedly in another text file, that is because you have text files with the same name. Look into creating duplicates (with different file names) in Project Assets at the onset.
    ATR

  • I followed the instructions to copy and paste ALL profile files from old PowerBook to new MacBook Pro, so why are no bookmarks now shown in Firefox?

    From the page
    https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile#w_copying-files-between-profile-folders
    After dragging and dropping the profile folder from the old PowerBook to the new MacBook Pro, I followed the copy/paste instructions, apparently successfully, to replace all the files in the latter with all the files in the former -- essentially to transfer my Firefox browser functionality from the old computer to the new. However, on starting Firefox, I have ZERO bookmarks (in other words, Firefox looks like it did when I downloaded and installed it a couple days ago). One note: When I performed the operation, I had used the new version of Firefox almost not at all, yet in the course of copying and pasting I had to permit replacement of HUNDREDS of bookmark files with identical names. How could THIS be?!?

    It is normally best to only restore personal data that you really need (bookmarks, passwords, etc.) and not a full profile folder.
    The xxxx in the name of the JSON backup (bookmarks-####-##-##_xxxx_$$$$.jsonlz4) denotes the number of bookmarks in the file and a file hash ($$$$) is appended to check if it is necessary to save a new backup, so only if there is a different hash because bookmarks were modified then a new backup is created.
    If you remove the newer backups that were created before you restored the backup and only leave the bookmark backups from the saved profile then Firefox should rebuild the bookmarks when you remove all the places files.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Can you attach a screenshot to clarify what you mean with ''all those hundreds of bookmarks, now residing in the profile folder''?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB

  • I send them to 50-200 people. Can I copy and paste their email addresses from a previously sent message?

    l

    Hi Sara,
    Thanks but that is not what i need. In my scenario i literally just need to copy all 200 email addresses from a previously sent file and paste them into the box saying "enter recipient email addresses" so that i can send the exact same people a new file. Without this feature this program is virtually useless to me now. Typing them in one at a time or choosing them one at a time from a list is not an option - i will only do this when i send out the first round of files and then i should be able to copy and past the email addresses to send out any added files that every person on the list will need. I just need to select, copy, paste, done. Hope this makes sense.
    Thanks,
    Matt

  • How do I display, copy, and paste a web address from an open Safari window please?

    I'm new to Mac and Safari. 
    I'm used to being able to just cut and paste a web address from a page I'm on into a discussion, but I don't see an address bar to copy from.
    I'm sure it is there somewhere, which toolbar or keyboard shortcut am I missing, please?
    Gordon_M

    Hello:
    While Safari is open, go to the menu bar>view.  Select "customize toolbar."  You may use the default, or customize it to yoru liking.
    Then when you wish to copy an address, you simply click on the favicon and go to edit>copy.
    Barry

Maybe you are looking for