Copy and Paste Error Using Dymo Printer

I have small issue, I export invoices for my shop to Adobe Reader XI
I then Copy and Paste the names and addresses to my Dymo Labelwriter 450 to make address labels. I am using Mac with OS X
My Invoices have the Font, ADAM.CG, this is my default for my Dymo printer etc and also the font on my PDF document.
When I paste this into my Dymo with Cmd + V the text is pasted but in Helvetica instead!
Can anyone point me in the right direction to correct this, I know I can change each manually, but when I have many to do, this takes time.
I have been in contact with Dymo and they replicate the same issue and say they can't help and to contact Adobe.
Thanks,
John

It is a standard Magento PDF that is created, then opened in Adobe automatically by my Mac, then just use a standard copy and paste to my Dymo LabelWriter.

Similar Messages

  • Copy and paste error - Text pastes at half-size.

    Copy and paste error — Text pastes at half-size.
    When I copy and paste text already in my photoshop document, the text retains the styling but the text size is exactly half of what it should be.
    I'm using the most recent version of CS6. Thanks!

    Ok, I found the issue.
    http://d.pr/i/h48E
    The text box was transformed by 200%, while other text boxes are at 100%. So when you copy a 200% into a 100% it's half. Makes no sense that this is a feature.

  • Can't copy and paste files using RDP session in server 2012

    I'm running windows 8, but I have also verified on a windows 7 machine as well. We have server 2012 installed on a machine
    I use remote desktop to get into. I cannot copy files from my local pc and use paste to get them to the server. I could do this with server 2008. Is there some setting I have to change or does this not work with server 2012?
    FYI, clipboard is checked when I open my remote desktop connection window. If I connect into a win server 2008 r2 machine from the same local machine, I can copy and paste files
    just fine.
    - Michael

    Hi,
    I believe RDS clipboard redirection should be enabled by default also on Windows Server 2012. Is there perhaps is a Group Policy Object active that is configured to disable Clip Board Redirection? Either on the computer or the user OU. If not:
    You did not explicitly state this, but I'm assuming that you are running in Application Mode (meaning you did not install the RD Session Host role) ? If so please check the registry on the Windows Server 2012 destination server and look for:
    HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Winstations\RDP-Tcp\fDisableClip
    this should be set to
    0, to make allow Clipboard Redirection
    Also check the key below:
    HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Addins\Clip Redirector
    This should have: 
    Name
    REG_SZRDPClip
    Type
    REG_DWORD0x00000003
    If you did run the RD Session Host role, and you have done so using a Scenario Based Deployment (Scenario
    Based Deployment of RDS in Windows Server 2012 ) you will have a Remote Desktop Management Service GUI available as pat of the Server Manager with which you can enable or disable ClipBoard Redirection from within a GUI on a Session Collection level
    or you can use PowerShell
    Using Powershell to install, configure and maintain RDS in Windows Server 2012
    Kind regards,
    Freek Berson
    The Microsoft Platform
    Twitter
    Linked-in
    Wortell company website

  • Copy and paste problems using adobe

    Hello, I am having an issue using the copy and paste options from a secure site into a word document. It is giving me the option to copy, but when I paste it into my word documunt, it gives me a black box in the place where it should have been pasted. Please help me with this issue. Thanks!!

    What does this have to do with InCopy?
    Bob

  • Cut,copy and paste functions using the mouse

    Hi.
    I'm a new mac owner and have read that I should be able to do the above. Is that correct, and if so how can I get my mouse to cut, copy and paste text. I can do it through edit but am unable to do so by right clicking.
    Thanks for any help in advance.

    Works fine in TextEdit and Pages - select text by clicking-and-holding and dragging the mouse across it, releasing, then right or control-clicking to bring up the contextual menu which includes these functions. (If you just right-click in TextEdit it will highlight just that word and bring up the menu). It doesn't work in, for example, Safari when entering text as in this forum or reading a web page.

  • Copy and paste error after lasso

    I take a picture and use a lasso tool, little ants moving around border, I go to edit-copy and get a error that says could not complete the copy command because no pixels selected.  Cannot get pasted to a layer

    Ok, I found the issue.
    http://d.pr/i/h48E
    The text box was transformed by 200%, while other text boxes are at 100%. So when you copy a 200% into a 100% it's half. Makes no sense that this is a feature.

  • Copy and paste error Illustrator cs5

    Hello,
    I am using Illustrator and Photoshop both cs5. When I attempt to copy any element from Illustrator and then paste it into Ps it seems like giving me the bounding box however it doesnt drop the exact element.
    I tried dropping smart object it didnt work. I tried dropping pixels it didnt work. I tried dropping shape layer it works.
    any solutions would be great.
    Thanks
    Omer

    i tried just a plain rectangle with a gradient and without stroke.
    thats all!
    i ve been doing this since smart object introduced to Ps first time had this bug on cs5
    *edit: i also tried various other elements like text, any path but no chance. Then i launched my legacy illustrator app cs4 and it just perfectly did the job..

  • Copy and paste error

    Hello everybody!
    I'm new user, and I've a question about Pages.
    Well, when I copy a text from intenet page, using safari, and then try to paste, Pages doesn't paste all the selected test, but only a part of it...
    Maybe someone knows why..?
    Thanks
    Alberto R Air

    I never got that but maybe it's because I never paste directly.
    As fruhulda wrote, often, what we get is not a piece of text but a table.
    Alas, pasting a table doesn't generate line breaks so a part of the table may be hidden.
    My own practice is simple :
    Copy from a Web page
    run my good old huge script :
    set the clipboard to the clipboard as text
    then paste.
    This way, I paste a piece of text.
    In a word processor document, if it doesn't fit in a single page, a second one is automatically created.
    Yvan KOENIG (VALLAURIS, France) lundi 17 janvier 2011 16:31:28

  • I can't copy and paste nor can I print

    I cant

    Hi,
    Did you checked the document properties, to see if all this is allowed for the document.
    Open the PDF file, go to 'File' menu and then click on 'Properties'. On the document properties window, click on 'Security' tab and then check what is allowed and what is not.
    Thanks

  • Error message when I try to copy and paste using mouse

    I am taking college classes online. When I try to copy and paste something using the right mouse button I keep getting error messages that something is blocked on my browser, and cannot copy and paste. When I use ctrl A ctrl C ctrl V everything works fine, but I don't always want to copy everything. How can I fix this because its starting to be a hassle.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Using windows7..I can not longer copy and paste, cut and paste. what happened?

    Using windows 7, on a Compaq Presario, for a time now, I am not able to cut and paste, or copy and paste. Used to work by right click, highlite copy, got to word page and paste. I cannot get right click to bring this box up. What is happening?

    I can't either. It is helpful when needing a link to send to a classmate via email. I also can't copy address bar because the complete adress no longer shows. I like XP. My Vista does better. This is a major problem when doing large papers 4 class. I use Son of Citation. You have to be able to copy paste. I have enough class work to do I don't need more...
    1117poppop wrote:
    did you get an answer i can't do it either

  • Can't copy and paste using mouse

    Hello all.
    It seems that after the installation of patch # 19 for Unix AIX the feature of copy and paste by using the middle button of the mouse doesn't work anymore.
    Does anyone confirm this behavior? If so, is there any work around to solve this issue?
    Thanks in advance,
    Fred
    Edited by: [email protected] on Feb 17, 2009 11:12 AM

    I think CUT, COPY, PASTE works like Forms 6i in Windows XP.
    I am giving the detail If you feel that it is better then correct me otherwise reply me for more.
    1. Goto Form's Object Navigator Property
    2. Find Popup Menus Node
    3. Doubble Click on it.
    4. Menu would appear.
    5. Doubble Click on it.
    6. Menu Item would appear.
    7. Give menu name and goto its property.
    8. Goto "menu type item" on Property Platte
    9. Select "Magic" from it.
    10. Now, goto "magic item" on Property Platte
    11. select "cut" from it.
    12. Now, goto form and then goto that's item property for which you want to show the menu.
    13. Goto "popup menu" on Property Platte.
    14. Select defined menu.
    15. Now run the form and test it.
    I hope it would work in other platforms.

  • How to disable copy and paste from Mail to other applications

    Are there MDM or policy that can limit copy and paste?  Using MDM or ACU to lockdown the phone would be completely useless in regards to preventing data leakage unless copy/paste can be controlled.  MDM provider is advising that there is no API from Apple to allow locking this function.

    No. Not that I'm aware of. If you're that worried about people being able to copy and paste from email messages and having confidential data get 'into the wild' that way, then maybe you shouldn't be issuing or permitting the use of smart phones.

  • Copy and Paste from MathType

    I am using MathType with Adobe InDesign in  Mac computers (OS X 10.4.11 and Leopard OSX) . After creating an equation in MathType and copying to the clipboard I paste it in an InDesign CS3 file. When pasting the equation, which was written using an appropiate font (Time, Book Antiqua, or New Century Schoolbook, etc), the fonts change to Arial, independently of the fonts used in MathType. This does not happen when pasting the equations in Word. Using the Save As command in MathType and the Place command in InDesign, which I don´nt want to use, solves the problem. Does someone knows why this happens and how to cope with this problem? Thanks.

    Thanks Peter. In fact, I had the preference for clipboard in InDesign set to "text only". However, changing it to include all the information (formatting, etc) did not resolve the problem. I continue getting the Arial font, whenever I paste an equation from MathType. I should mention that I am using a Spanish versión of InDesign CS3 and don´t know if this is causing troubles. I Hope to find an answer to this question in the near future.
    The reason I don´t want to use "Save as" in MathType and the "Place" command in InDesign is that when a variable or an equation occurs several times in a given chapter of the Calculus book I am writing, InDesign creates a link each time I use it, even when "Copy" and "Paste" are used within this last application. In other words, once I "Place" an expressión or a symbol (for example the symbol for irrational numbers) from MathType and I use the same symbol or expression in the InDesign chapter or page, I get several links on the link palette. As a result, I have a lot of links, all of them referred to the same expression, symbol or variable. May be this answers what FivePicaPica says.
    As I know, by the way, Macs and MathType are not limited to only two fonts. In fact, any of the system fonts can be used and "copy and paste" with Word. The problem arises when cpying and pasting from MathType to InDesign.
    Thanks again
    Jupiter

  • Copy and paste to a JTextArea under Mac OSX

    Hello,
    Mac OSX users complain about the lack of copy and paste functionality
    when they run my small Java application. Unfortunately I don't own a
    Mac so I cannot test it or find out where the problem is. When I run the
    application under various versions of Linux or Windows I can copy and
    paste by using the common keyboard shortcuts ctrl-c and ctrl-v.
    Searching the web I found discussions here and there, some very old,
    but none of them was realy solved or gave me an idea of what I could
    try to change in order to make c&p work under Mac OSX.
    So I need a little help. First I'd like to know if copy & paste works when
    the app runs as applet or standalone application (the jar file can do both).
    And, of course: why doesn't copy and paste work under Mac OSX?
    The application can be found here (released under the GPL):
    http://transtoba2.seige.net/
    And please be mild, it is still in beta state. ;-)
    Best regards
    Leander

    The following link helped me understand an issue with copy and paste
    http://www.jetbrains.net/jira/browse/IDEA-12078
    It seems to be down to the L&F you are using and how the key bindings are mapped.
    In summary
    OSX 10.4 , Safari and Firefox
    To copy/paste in the Applet � Ctrl-C , Ctrl-V
    To paste a value from Altio into the OSX environment use ^ V (^ is the Apple key)
    To paste a value from OSX into Altio use Ctrl-V
    Hope this works for you
    Gary

Maybe you are looking for