Copy and paste from premiere to after

Hi,
I have a timeline in premiere cs55 with MTS files, i copy and paste all the timeline from premiere to after, all work and i have a precomposition for each MTS source file which is what I want.
I have an other timeline with QT prores mov files, i do the same ( copy and paste to after effects), all work but i have only footage without precomposition of each mov files...
Do somebody knows why ? what I need to do to have this automatic precomposition by file source when i copy and paste from premiere to after effects ?
Thank you

Trim Compose script is nice but it's not exactly what I want.
For instance : If I have 3 sources clip A, B and C each 10 minutes. I edit on the timeline and keep for instance 5 differents small parts of clip A, 3 of clip B, 7 of clip C, every thing mix in time, like we can do for an interview editing.
I want to put in after effects a composition with my final edit with use of edit of 3 precomp of entire clip A, B, C. This way i can make a key or color correct etc.. in each 3 precomp only and have all my shots with these key or color correct in my final comp..
in fact Trimcompose like but with only one precomp per source file, edit in final timeline... Sorry difficult to explain for me in english..
It is what happen with my MTS files in my project but i don't know how it's happen...
thanks for all

Similar Messages

Copy and paste from premiere

hey guys,
copy and paste into after effects worked like a charm with CS5.5, but now when i copy and paste to CS6 is gives me a After Effects Error 17::18: zero denominator converting ratio denominators
the're m4v files, but that's never been a problem before...
any ideas?

the're m4v files, but that's never been a problem before...
Well, so many things never have been a problem before, but then CS6 came around the corner and reared its ugly head... Not realyl an idea, but you might wanan follow some of the advise I just posted yesterday: http://myleniumblog.com/2012/05/15/make-cs6-work-for-you/ Perhaps one setting or a combination of things will avoid the issues.
Mylenium

I just bought this in order to copy and paste from a PDF and after I convert I still can't..

I just bought this in order to copy and paste from a PDF and after I convert I still can't..

Hi helpme59,
It depends upon the restrictions set on the pdf.
If the creator of the pdf has set restrictions against copying then you will not be able to copy the content.
Are you facing the same issue with all the pdf's?
Would it be possible to share the pdf with me.

How do I copy and paste from websites on thge latest Firefor?

I used to be able to copy and paste from the internet with the last Firefox application. All I want to know js where do O go on the latest application in order to copy and paste information on websites.

After highlighting something on a web page by left-click and dragging the mouse, you can go to Firefox button (or File) > Edit. Hover your mouse pointer over the 3 images to the right of Edit for a tooltip (scissors = cut, two pages = copy, clipboard = paste) or click the arrow to the far right of Edit for a drop-down, non-icon list of the functions available.
In Windows you can also right-click (without moving the mouse pointer around) the highlighted text, then choose Copy. On the document, email, etc., that you are copying to, you can use right-click, then choose Paste.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

How can i copy and paste from one spreadsheet to another?

Trying to shuffle around the rows as part of an everchanging schedule. When i copy and paste from one spreadsheet to the other, the images overlay each other as if i were litterally cutting them out of paper and then sloppily pasting to another. Is there a way to set them up so crosscutting is more seamless in appearance?

jrc1971 wrote:
...When i copy and paste from one spreadsheet to the other, the images overlay each other as if i were litterally cutting them out of paper and then sloppily pasting to another.
JRC,
The reason you get that result is that you are pasting the rows to the canvas of your second document instead of into an existing table.
Instead, make a large blank table in your receiving document and paste into that table only after clicking on the cell where you want the first cell of the copied data to be positioned.
Jerry

Cannot copy and paste from webmail in Firefox but can in Safari! Why?

Last months (? after upgrade) I cannot copy and paste from my webmails but can with Safari. Any help with this? Infuriating.

Select view source and copy/paste from there.
PZ

Copy and Paste from PDF Looses Formatting in SL

Hi Everyone,
I've discovered a strange problem in snow leopard. Prior to upgrading to snow leopard, I was able to copy and paste from a PDF in Preview into Word, save as a text file, and preserve the formatting of the original PDF. This was important because I had written a perl program that extracted relevant information from the text file (the one based on the PDF) to generate reports. The PDF was not scanned but generated from some sort of batch program, and the output has columns and rows. I tried to copy and paste today, after upgrading to Snow Leopard yesterday, and no matter what I tried (including paste special) the formatting when copying from the PDF to Word was lost. I tried Adobe reader as well as Skim and tried copying into TextEdit but nothing worked. I even tried exporting from Adobe reader as a text file but have the same problem.
Being a good upgrader, I kept a backup of my Leopard install. After booting from it, copy and paste work as before and I was able to generate a properly formatted text file. From my experience with this, it appears as though the way snow leopard renders a PDF, or works with copying and pasting, is different than previous operating systems. Does anyone happen to know if there is a way to make snow leopard's copying and pasting work as it did in Leopard before?
If it helps, the machine I was using was my wife's white MacBook, 2 GHz with 2 MB of RAM.
Thanks in advance.
Joe
Message was edited by: bbjonz

I likewise rely on ChemDraw and Pages/Keynote for my research and teaching. This is unfortunately an enormous problem, as I use these programs on a daily basis. I will be re-installing Leopard until the problem is resolved. Chambridgesoft's reply to the issue is that "The current version of ChemDraw/ChemBioDraw (12.0.0) was developed and released prior to the release of Snow Leopard. Therefore, ChemDraw 12.0.0 has not been officially tested and qualified under this operating system. We hope to support Snow Leopard in future in a future point release." I guess they couldn't get a hold of a development build? As I'm using ChemDraw Ultra 11.0 I will obviously not be supported in any case.
Judging from other replies, the problem seems to stem from SN copying as a .tiff rather than a .pict? Perhaps someone has a fix to make SN copy as .pict?

I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

Copy and paste from pdf to powerpoint

i have a seriously annoying issue >>> whenever i copy and paste from a pdf file to powerpoint , the test (which originally in onesentence) get divided to many bullets!!!! thats require so much time to fix . is ther any way to avoid this and get my text as one ???? thanx

It's a limitation of PowerPoint - any line breaks in the pasted text will be converted into a bullet point when pasting into a the standard slide layouts, which apply bullets to the text content by default. You can't avoid copying the line breaks as they're present in the original text, so you need to remove them by hand after pasting.

Can't copy and paste from InDesign to Illustrator

Recently changed computers and now I dont seem to be able to copy an object from InDesign and paste into Illustrator. This used to work fine. Any ideas? Thanks

In my experience, copying and pasting from ID to Illustrator can be quite temperamental -- it often takes a couple of attempts to get it to work, for no apparent reason.
But I don't recall ever being unable to do so, after a few tries.
Jeremy

How do I copy and paste from one page or file to another page or file - on the same screen?

How do I copy and paste from one page or file to another - on the same screen?

Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

How do I copy and paste from Word into Adobe Photoshop Elements 13

using Windows 7 Professional SP1, Microsoft Office 365 (Office 2013).
I can copy the text within a word document, without a problem.
However, the paste options are greyed out and "Ctrl"+"V" does not work.
Am I missing something, as I can't work out how to copy the text from word, to use as a basis for my photo shop document.

mattresshero wrote:
Hey, guys. I am a complete noob to Elements 13. I need to get something done relatively quickly and I need to learn how to copy and paste from a Word document. How do I do this?
Copy the text in WORD to place it on the clipboard
Open PSE in Expert tab
Open your picture file
Get the type tool out of the tool box, click an insertion point
Go to Edit>paste
You should see two layers in the layers palette: background layer, and layer with the text.

How to disable copy and paste from Mail to other applications

Are there MDM or policy that can limit copy and paste? Using MDM or ACU to lockdown the phone would be completely useless in regards to preventing data leakage unless copy/paste can be controlled. MDM provider is advising that there is no API from Apple to allow locking this function.

No. Not that I'm aware of. If you're that worried about people being able to copy and paste from email messages and having confidential data get 'into the wild' that way, then maybe you shouldn't be issuing or permitting the use of smart phones.

I cannot copy and paste from email to word processor in microsoft 7, not Office

why can I not copy and paste from Yahoo email into Microsoft 7 word processor. I don't have Office. I used to do this all the time using Control C to copy and Control V to paste but recently AT&T installed Firefox and I think that's when the trouble started

There are a range of different kinds of forms. For example, this site uses very simple controls that don't automatically convert Word's formatting to an online format. The site where you are trying to paste your resume probably works differently.
What methods have you tried using to paste? Typically one of these will work:
* Ctrl+v
* right-click > Paste
* Edit > Paste (from the menu)
Some sites offer their own buttons to paste, but for security/privacy reasons, Firefox usually disables those.

Cannot copy and paste from Word into Mail

I cannot copy and paste from Word into Mail. Neither from using the keyboard shortcuts, or using the Menu function. I can copy and paste from other applications into Mail- but for some reason, text copied from a Word document (both in .txt and .doc formats) will not paste into an open email. Anyone else have this issue? It's a new issue. I used to be able to do this easily.

I had similar issues starting about the same time or within the past week. However, I can copy and paste, it just takes considerably longer than it used to before. Copying something from a web page into Word could take up to 30 seconds now on my computer but it shows a busy mouse pointer while it is loading, then clicks/pops when it loads into the Word document, but then actually takes about another 5 to 10 seconds to appear in the Word document. I have no idea why it is delaying now when it did not do it before, but since it is still going into the document I am living with it for now. Are you waiting long enough to see if it appears?

Copy and paste from premiere to after

Similar Messages

Maybe you are looking for