Copy and paste journal remarks

Hi all
What is the shortcut to copy and paste a certain word in journal entry remarks to all rows without affecting other words in the same remarks
like excel Find copy and replace all function?
Kedalene Chong

Hi
you can use the replace function of SQL
update JDT1 set LineMemo=REPLACE(LineMemo,'From Word','To Word')
shachar

Similar Messages

Copy and paste cell content of web form of Hyperion Planning

Our end users encountered performance issues in using the web forms of Hyperion Planning. We have some large web form with 60 columns and 100 rows i.e. around 6000 cells. When end user move around the cell they feel a slow response in the web form especially when copy and paste some cell content from one row to another, or a few cells from one position to other position.
Anyone got similar experience in using web form? Also we understand that Hyperion design will check the cell content of each cell and generate a SQL query to the backend metadata database. It is quite time consuming and waste CPU resource because most of the time our end user will not keep the text information under each cell. We have consulted Oracle team and understand that we cannot disable the cell content checking via SQL query.
Any workaround solution exists to reduce or remove the performance issue in cell content copy and paste?
Thanks!

Hyperion user wrote:
Alp Burak wrote:
Hi,
We had faced the same issue a few years ago. One of our geeks had done a change in either Enterdata.js or Enterdata.jsp which disabled form cell validation. I don't currently have the code with me but it wasn't a big change really, remarking a function could be doing the trick.
I don't think this is officially recommended by Oracle though.
AlpThanks for your advice. We will try to locate the enterdata.jsp and enterdata.js and found out where the SQL being executed.We found out the Enterdata.js under the deployment directory of Weblogic. However it is over 400KB size and many many lines of codes. We think that it is very difficult to locate where should be customized to remove the SQL checking on cell content.
\\Hqsws04\hyperion\deployments\WebLogic9\servers\HyperionPlanning\webapps\HyperionPlanning

Most compatable file type to use when copying and pasting specially formatted text into html pages?

Hello,
I have a simple web site at http://www.psychicmeatloaf.com which is an online poetry journal site. I use files people send me (mostly .doc or .docx) and cut and paste the text from those files into html pages in an older version of Dreamweaver and some of the text has special formatting (like this page: http://www.psychicmeatloaf.com/Chang-poetry.htm ). The best way I have found to maintain the special text formatting is to open the .docx files and "save as a web page" in Word and then open the web page from Dreamweaver and then "Preview the page" in Explorer and copy and paste from the preview into an html page in Dreamveaver. Even using this method, some text will not maintain it's special formatting and for those I just save the page as a .jpg file and use that, because I have no other choice.
My question is, is there a better way and is there a better file type to work from other than .docx?
Thanks a milliom,
George

neophyte weaver wrote:
The best way I have found to maintain the special text formatting is to open the .docx files and "save as a web page" in Word and then open the web page from Dreamweaver and then "Preview the page" in Explorer and copy and paste from the preview into an html page in Dreamveaver.
That's a lot of steps to get to a single end that could be done with a simple copy & paste of the text into code. Like Photoshop and Fireworks, Word writes some very bulky and dirty code. I wouldn't recommend it for direct copy by the method described above.
I personally copy the text and paste it into code view. It takes a little more work, but I don't get dozens of lines of inline styles added with it and using a preformatted post div (saved and hidden in the code (), I can quickly put title, date, byline and links up with a cut & paste.
That's just my $0.02 worth
Also, since nearly EVERYONE will use a different formatting in a Word doc, putting a bunch of differently formatted posts into a page will make it look like one of those ransom notes made of cut out text from different newspapers and magazines. Better to keep everything in a single format (your format) so it doesn't become an eyesore.
Message was edited by: Curtis_E_Flush

I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste., I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste.

I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste., I can't copy iPhoto to my external hard drive. It will not allow me to drag and drop or copy and paste.

NTFS is your problem.
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
See this article
http://support.apple.com/kb/TS5168
for more. Note also the comment:
“Additionally, storing the iPhoto library on a network rather than locally on your computer can also lead to poor performance or data loss.”

Can't copy and paste files

Why won't my MacBook Pro let me copy and paste files, particularly from my external hard drives (to each other) and (to my computer). They are both new and it shouldn't be a problem.
Please help!

Is it possible that the hard drives, which you said are new, have not been formatted for the mac? If they are formatted NTFS (which is the standard format for new drives) you will only be able to read from the drives, not write...therefore you will not be able to cut and paste.
To check the format of the drive, from the Utilities folder, open the application "Disk Utility". Select the Hard drive from the left side of that app, and then click on the "Partition" tab. Then click on the big Partition block found under "Volume Scheme" and see what it says beside "Format". If it is NTFS, this is your problem.
The best solution if the drives will only be used on the mac is to use the Disk Utility Application and reformat the hard drives by selecting the drive you want to format on the left side of the app, and select the "Partition" tab. Under Volume Scheme select "1 partition" and then for format, select "Mac OS Extended (Journaled)". Then Click Apply. PLEASE NOTE THAT DOING THIS WILL ERASE EVERYTHING ON THAT HARD DRIVE!!!!
If the drives need to be used on a windows machine as well, you can download and install this plugin for your mac that will make it read and write to NTFS although it will do so slower than a disk formatted for the mac. Here is a link: http://www.macupdate.com/app/mac/24481/ntfs-3g Using this option will NOT require you to loose any data that might already be on the disks.
Hope this helps!

Hi, I was trying to copy and paste a lot of info for one day on my calendar to another day and an error message popped up saying that the system responded with an error. Msg won't go away I force quit ical

Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?

K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality.

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter

Cannot copy and paste descriptions in PDF Portfolio

I am using Adobe Acrobat Pro 9.5.1 on a Windows 7 laptop. Since a recent update I am unable to copy the description in a PDF Portfolio and paste it back. I used to be able to copy the description; delete the file; add an updated file and then paste the description back. Now I have to re-type the description. I cannot event copy and paste a description from another PDF portfolio. Can you advise why this is so and is there a workaround?

Adobe does not report the progress of bug reports to the public, nor can I comment on the timescale for any future updates or what they may contain. Priority is of course given to the current Acrobat X Family and recently-announced Acrobat XI Family.
Copy/paste between all the file details fields in PDF Portfolios is fully functional in Acrobat X Pro (which currently has a captive install of Flash Player) and in Acrobat XI Pro (which does not). I don't have an install of 9.5.1 to test your bug report against, but whatever is causing the issue in your case it's not an intentional change.

Acrobat XI Windows 7 - unable to (copy and) paste form fields to a different pdf.

To maintain a consistent appearance and function in the forms I create for various departments, I copy a few form fields (text, checkboxes) from an unrelated Acrobat PDF. Then I paste those fields into a different PDF document that I am making fillable.
I do this because Acrobat does not allow setting a default for certain attributes when creating form fields, i.e. an unchecked scroll option, a default font other than Helvetica (in Acrobat 8, 9, and X). Plus it is time-saving to copy and paste fields that are the same in another PDF, like name, address, phone. etc.
We just updated to Acrobat XI and Windows 7 and now I cannot paste copied fields onto a different PDF.
Using "replace pages" is not applicable as I am pasting to an entirely different form and copying form fields with the settings I use.
Is this a glitch or is something new that was not in Acrobat 8, 9, and X?
Also, question regarding this forum entry - http://forums.adobe.com/message/5638333#5638333 - which is somewhat different from my current question.
The PDF creator could not paste copied fields on other pages of the same PDF. Was this ever resolved so that copy and paste worked as it has for the last 3 versions of Acrobat?
Thanks!
Joanie

Gilad: You're right: when the fields are different, such as a checkbox and a text field, and you try to title them the same, Acrobat gives you a message. I received no messages, the field names are not the same or I missed one and Acrobat is no longer messaging about it.
My question is different. Acrobat XI will not let me paste any field copied from a different PDF. I've been doing that for 5 years in three different versions. Maybe Acrobat XI has a new process for that, which I could not find in Acrobat help. Maybe it's because all forms now have extended rights automatically in Acrobat XI and there is another method to copy common fields to other PDFs.
Any thoughts about the new Acrobat XI? It's different in many good ways, but different.
Thanks for your ideas.

Anchor tag error, also copy and pasting text comes up "null"

After the recent update I am receiving anchor tag errors telling me to start with an alphabetic letter, which I was. Also no longer lets me copy and paste text onto a page, instead it says "null". Any ideas on a fix ?

I don't see a closing </body> tag in your code. There's an opening tag, but no closing tag, hence unbalanced.
^_^

How do I copy and paste from one page or file to another page or file - on the same screen?

How do I copy and paste from one page or file to another - on the same screen?

Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

Copying and pasting from Adobe Photoshop CS4

Does anyone know how you can copy and paste text that you enter in "Description" in the "File Info" section of a jpg file across to other applications. It would save me countless duplication of having to write the description on emails to which I attach jpgs. When I try to copy it and paste the options in photoshop are greyed out and inaccessible. Thanks.

Regular copying via command-C should still work.

Problem with Copy and Paste in Edit

Today i cannot get Copy and Paste to operate. After highlighting a link in blue I cannot get the Copy to register. The link stays blue and does not respond to Copy click. I send links on Yahoo IM to friends of sites or Youtube videos. Thanx for the great help here!

I'm glad that is working again. Copy and Paste is such a fundamental operation, a computer is useless without it.
By the way have you had a look at Mac 101 Essentials? At the bottom of that page are further link. Just thought it might be useful to you as you are new to Apple Macs.
Happy computing.
regards roam

Copy and paste journal remarks

Similar Messages

Maybe you are looking for