Copy and Paste Keyframes?

Is there no way to copy and paste keyframes from one track to another? I've also tried duplicating the track, but the keyframes don't duplicate. This would be a very useful, timesaving feature. Another would be the ability to directly edit a keyframe by selecting it and entering a value for the volume.

What version of Audition are you using?
I'm pretty sure that keyframes duplicate when you duplicate a track in Audition CC
I certainly agree that directly entering a value for a keyframe would be MOST useful - here's hopeing.....

Similar Messages

  • How the heck to I copy and paste keyframes (scaling, rotation, etc.) in motion 5?

    Trying to figure out how to copy keyframes from one object to another obejct in Motion 5, and I'm left screaming pulling my hair out.
    It USED to be so easy... where is the paste attributes option here?
    Or can I duplicate the object and relink it to another object? Going crazy here. Any help would be great.

    There are several ways to copy and paste keyframes:
    1. Select the "source object" and go to the animated parameter in the Inspector (position for example).
    2. Click and drag the parameter name you want to copy to the destination layer in the layer list via drag and drop. The values (including keyframes) will be copied to the appropriate channels.
    OR
    1. Select the source object.
    2. For each channel that is animated (position, rotation, scale) go to the far right side of the parameter in the Inspector and select "Show in keyframe editor."
    3. Select all the keyframes you want (I use a simple click and drag to create a box an select all of the keyframes) and then copy (command-c).
    4. Now select the destination layer, position the playhead where you want the keyframes to start from and paste (command-v).
    http://help.apple.com/motion/mac/5.0/en/motion/usermanual/#chapter=12%26section= 12
    If you just need to match the animation of another layer (Position, Rotation, Scale) try using the Match Move behavior.
    http://help.apple.com/motion/mac/5.0/en/motion/usermanual/#chapter=22%26section= 7 (See the section: "To apply the transformation of a source object to a destination object")

  • Copy and paste keyframes in motion tab

    Is there a way to copy and paste a keyframe in motion or filters tab?

    This video was helpful to me
    http://provideocoalition.com/index.php/smartin/video/reapplyingkeyframes_inmotion/

  • Copying and Pasting keyframes

    Right, okay. I cannot for the life of me figure out how to copy and paste a keyframe in the same property in the timeline. I had assumed that as in all other adobe programs, you would be able to option (alt) click and drag, duplicating the selected keyframe. But apparently this is not the case? I've worked around it by sliding around my keyframes so I can create a new one with the same properties, but there must be a better way to do this. I must be missing something.
    Help?

    Select the keyframe, use the Edit menu Copy command (or keyboard shortcut), go to the desired point in time, and paste the keyframe using the menu or keyboard command.

  • Copy and Pasting Keyframes

    Hi,
    I have made a Color Corrector 3-way Filter on a clip of video. I have set keyframes on all the parameters to start at the same time and end two seconds later. I now want to move all of the keyframes to start at a new time and end two seconds later. How do I cut all the keyframes and paste them at the new start point? Is that possible? Currently simply cutting and pasting doesn't work, as it pastes the filter (so now it is applied twice).

    You can paste attributes to a clip with Option + V I think. Have you toggled the keyframe editor on and played with that? It's Option + T. Then second click on the new area and choose the keyframes you want to edit.

  • How do I copy and paste multiple keyframes?

    I've used previous versions of Final Cut in the past, but primarily have done my editing with Adobe Premiere.  One of the companies I am freelancing for only has Final Cut X on their machines.  I'm a bit confused about keyframes.  Keyframing in the inspector seems severely limited.  I could use some help.
    Basic example:  Say I want to zoom and pan into an image... then have it sit there for 5 seconds... then zoom and pan back to its original location.  I can't figure out how to do this at all with Final Cut X. 
    In Premiere I would accomplish this extremely easily.  
    #1 I'd set my playhead at the location I'd like START my zoom IN/pans and set all my necessary keyframes.
    #2  Then i move my playhead to where I'd like to END my zoom IN/pans, change all my parameters and this sets my necessary keyframes.
    #3  I move my playhead further to where I'd like to START my zoom OUT/pans to where it originally was... and set all my necessary keyframes
    #4 I move my playhead to where I'd like END my zoom OUT/pans to where it originally was... and simply copy and paste my keyframes from step 1...
    The reason why I copy and paste my keyframes from step 1 is because often my parameters are very specific.  I'm not necessary zoomed in 100% at the beginning with my position set exactly where it needs to be.  Say, for instance, I'm working with an image that is zoomed at 75% and perfectly positioned at some random position somewhere in my frame... without the ability to cut and paste keyframes, I'd have to go back to keyframe 1 and write down all the parameters... then go to keyframe 4 and re-enter them.  Massive pain in the butt.
    How is this properly accomplished in Final Cut X?  I can't even see my keyframes on the timeline... every tutorial I've found just says "set keyframe 1 and keyframe 2 in the inspector" and that's incredibly limiting.

    That is kind of a bummer, really.  Maybe I'll need to adjust my workflow, but it seems like it's a MASSIVE drawback of Final Cut X. 
    For example:
    Say I have an image on the screen at with Postion X: 97.3px and Position Y:  -69.3px  with the zoom set to 136.3%... (keyframe 1)
    And say I want to move that image across the screen to Postion X:  32.5px and Position Y: -23.5px with a zoom set to 85.3% ... (keyframe 2)
    Then say I want to let it stay in that position for 10 seconds ... after 10 seconds I'll set more keyframes by clicking the appropriate keyframe buttons and the settings will once again be set for Postion X:  32.5px and Position Y: -23.5px with a zoom set to 85.3% ... (keyframe 3)
    Now say I want it to go back to the original position and zoom.   In premiere I'd just highlight all my keyframes from Keyframe 1 and paste at the new location of the playhead... with Final Cut X, i'll need to go back to Keyframe 1 and literally write down on a piece of paper:  97.3, -69.3, 136.3% ... then go back to Keyframe 4 and type them all out.   This is just a simple example, though.   The more individual parameters I'm setting at specific points... the bigger pain this will be.   Lame. 
    Even with the link you shared... it appears to be completely amature compared to the keyframe editing capabilities of Premiere Pro.  In searching a bit on google to confirm the lack of features, I found someone else complaining:  
    "You cannot expand any parameter that has more than one attribute (like crop or scale or position) - making it useless.
    You cannot add bezier handles to keyframes
    You cannot copy and paste keyframes
    When you copy and paste attributes, you have no choices as to how they will be pasted, etc... it is dismal.
    All in all, it is a step backwards from FCP"
    Personally, I'm a bit surprised... the more I learn about Final Cut X, the more I am starting to like it.  I know a lot of professionals hated it when it initially came out, but I chaulked it up to unfamiliarity with the new software.   For me, this keyframing thing is by far the biggest drawback I've found to yet.

  • Is there a way to copy and paste the same changes in keyframes along the timeline?

    Hi,
    I was doing an effect (changing the parameters in keyframe editor) and I wanted to do the same effect in specific moments on the timeline. Is it possible to copy and paste the same effect on the keyframe editor?
    Thanks

    Following on from GFXZen, as well as repeating a series of keyframes as a regular pattern, if you need to move some of the repeats a little (to match moments in a soundtrack), use the Generate Keyframes command. That turns the extrapolated curves into editable and moveable keyframes.
    There's more on information on keyframe extrapolation and generating keyframes at the bottom of this page from the Motion help system.
    Check out the help information on the Transform Keyframes tool - you can use this to transform the keyframes of many parameters at the same time. Similar to using the option key when dragging keyframes in Adobe After Effects.

  • Is copying and pasting multiple keyframes disabled?

    I haven't used after effects for a year or so, but I am 100% positive that I was able to copy multiple keyframes or duplicate them just by holding down the alt key and dragging, or by hitting cmd+c and cmd+v. I'm trying to do that now but it copies the actual layers, not the keyframes and I found a plugin here http://aescripts.com/paste-multiple-keyframes/ that lets you copy and paste multiple keyframes .. I really don't understand why adobe would disable such a helpful feature, could anyone let me know if they have the same problem or am I doing something wrong? I'm desperate!
    Thank you

    > I am 100% positive that I was able to copy multiple keyframes or duplicate them just by holding down the alt key and dragging
    That has never been a feature of After Effects.
    > hitting cmd+c and cmd+v
    I just tried copying and pasting multiple keyframes using these commands, and it worked fine for me.
    > I really don't understand why adobe would disable such a helpful feature,
    We changed nothing in this area.

  • Copy and Paste audio track MIX from one track to another??

    Hi
    What's the best way to handle this.
    I have a video with one long music track, that I mixed using Adobe Premiere's Audio Mixer.
    The musician made a new version of the track with some very slight modifications in the music.
    Rather than having to remix the entire new track, I would prefer to either:
    1) Copy and paste the attributes of the orginal audio track onto the new music track -- retaining the Mix I did from the original mix.  Is this possible?  I tried it once and it did not seem to work.  (I used the Mixer, not keyframes, to do all of the mix.)
    or
    2)  Is there a setting in Premiere's Audio mixer to "gang" the new track to the old one -- with the new track cloning the old track's mix.
    Or would it be better to bring the two audio tracks into Soundbooth and do it there?
    Thanks,
    ...Rowby

    Thanks Colin
    I did a complicated mix on one long background music track and was not looking forward to doing that remix because of various minor music changes made by the musician scattered throughout that long track.
    Your Alt (for replace solution) worked perfectly and saved me a ton of time.
    The fact that Copy attributes for Audio doesn't work for copying audio keyframes is another reason do do audio mixes using the Mixer instead of using keyframes to adjust volume.
    ...Rowby
    P.S.   And a big LIKE to Adobe's clever programmers for including features like these.

  • Copy and paste audio clip and maintain effects and tweaks?

    I created a track on the iPad and transferred successfully to the desktop.
    I then used Melodyne to clean up the vocal track.  Some of the vocal timing was off so i used flex time editing to straighten it out. It's a piece I'd like to loop throughout.
    When I copy and paste the pasted clip loses all the effects and edits and is back to the raw vocal track.
    Is there a way to copy and paste and maintain all of those tweaks?

    Thanks Colin
    I did a complicated mix on one long background music track and was not looking forward to doing that remix because of various minor music changes made by the musician scattered throughout that long track.
    Your Alt (for replace solution) worked perfectly and saved me a ton of time.
    The fact that Copy attributes for Audio doesn't work for copying audio keyframes is another reason do do audio mixes using the Mixer instead of using keyframes to adjust volume.
    ...Rowby
    P.S.   And a big LIKE to Adobe's clever programmers for including features like these.

  • Copy and Pasting Motion? Please help!

    Im quite new to flash. It's really, really annoying me at the minute.
    My situation: I've got 7 frames of animated motion that is exactly the way i want it. I want these 7 frames of motion to loop so it gets to around 300 frames. So rather than doing every frame manually (which takes ages) i went to copy and paste motion.
    So i highlight my 7 frames and click 'copy motion'. Then I try pasting them and i get the error mesage (in the attached picture) that nothing is selected. But i've clicked on the 8th frame, the place were i want the motion to begin, but still it says this error message.
    So then i insert a new frame on the 8th frame space and paste the motion over the top of the 8th frame, but it misses the first 2 frames of animation (therefore messing eveything up) out and the motion is also wrong on top of that!
    Im desperate here, all i want to do is something simple and i dont know how.

    Yeah i want to animate my keyframes.
    I know i can copy and past the keyframes, but thats not what i want because if i do that my character does not progress forward (or to the right of the screen in this instance). I want to copy and paste the motion so he goes forward  (to the right of the screen).
    I have the character and i want him to walk from left to right across the screen whilst moving his, arms, legs and head etc (the motion) in a certain way.
    Also i had already converted my layers to symbols. I will attach another picture to show you my character.

  • Copy and Paste Vignette?

    Quick question - is it possible to copy and paste a vignette?
    Doug_

    Yes it is.
    However, its the whole secondary that comes with it. You have a .scc storage bin associated with the secondaries room where you can save corrections. However, it saves and pastes the entire secondary correction and will overwrite any current settings. This is also the only way to copy keyframed corrections forward.
    A work around might be to create a user shape vignette and simply create clones of it and re-attach it to the various secondary tabs as you desire.
    jPo

  • Hi, I was trying to copy and paste a lot of  info for one day on my calendar to another day and an error message popped up saying that the system responded with an error. Msg won't go away I force quit ical

    Need help for trying to unfreeze a message on my ical.  I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error.  All of my info was below the message.  I can't get that message to go away or work on the ical now at all.  I try to force quit ical and have shut down the computer and it still comes up.  Any suggestions?

    K,
    Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
    Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality.

  • HT201269 itunes cannot see my iphone backup.  I have a backup of the backup on an external HD, but even tech support cannot figure this one out.  I copy and paste backups into the correct folder but itunes still does not see it.  All I need are my contact

    Sorry for short novel I am writing.  I just wanted to cover as much backround as possible.
    So, here it goes.  I backed up my iphone 4 after renting a movie.  The movie only played the starting credits before I was called on for daddy duty.  A few days later the movie would not play, so I restored my phone from my backup.  The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie.  I then had a problem with my contacts showing up twice in the contacts list after the restore.  So I attempted another restore.  All was well at this point.  I then started having trouble with my pc and decided to copy the internal drive to an external source.  A week later I had a system failure and did a factory restore on my computer.  I re-installed itunes and tried to copy and paste the old backup into the new itunes.  Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh).  Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck.  The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine).  We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive.  Ok, this is where it gets weird.  We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files.  Whoohoo, itunes now see's a backup folder full of old files, or so we thought.  The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders.  When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored).  This left tech support and I both scratching our heads.  My service issue was escalated to the next level.  I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through.  As usual, apple disappoints again.  I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s.  I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files.  Any ideas or support in retrieving my contacts would be greatly appreciated. 

    Sorry for short novel I am writing.  I just wanted to cover as much backround as possible.
    So, here it goes.  I backed up my iphone 4 after renting a movie.  The movie only played the starting credits before I was called on for daddy duty.  A few days later the movie would not play, so I restored my phone from my backup.  The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie.  I then had a problem with my contacts showing up twice in the contacts list after the restore.  So I attempted another restore.  All was well at this point.  I then started having trouble with my pc and decided to copy the internal drive to an external source.  A week later I had a system failure and did a factory restore on my computer.  I re-installed itunes and tried to copy and paste the old backup into the new itunes.  Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh).  Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck.  The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine).  We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive.  Ok, this is where it gets weird.  We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files.  Whoohoo, itunes now see's a backup folder full of old files, or so we thought.  The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders.  When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored).  This left tech support and I both scratching our heads.  My service issue was escalated to the next level.  I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through.  As usual, apple disappoints again.  I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s.  I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files.  Any ideas or support in retrieving my contacts would be greatly appreciated. 

  • [b]HOW TO:[/b]  Copy and Paste THE Filename AND its PATH from Finder

    HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
    Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
    This is rudimentary, yet the word Path, is unknown to Mac Help.
    Message was edited by: jbov

    AJ,
    Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
    Jim
    its tedious, but this should work:
    open a terminal window.
    Drag and drop the icon for the file in the terminal
    window.
    This will put the full path including the filename on
    the command line.
    Copy the path from the command line, and paste
    (wherever).
    Close the terminal window.

Maybe you are looking for