Copy and paste multiple ap divs
I'm selecting multiple ap divs, copying, and attempting to
paste to another page. Only the last div in the succession of
selections is pasting, ie, index page - select div1, div2,
div3...div10, copy, paste to nextpage.html. Only div 10 appears.
Thanks for the assistance....
David Bird
That is mother nature's way to suggest that you not use so
many AP Divs.
I'm afraid it's all you get. What is it you are trying to
accomplish?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lusciousleprechaun" <[email protected]>
wrote in message
news:fqhs5h$pru$[email protected]..
>
>
> Hi there,
>
> Can anyone tell me how to copy and paste multiple AP
Divs? When I select
> the
> AP Divs and do Control C and Control V only the last
selected AP Div is
> copied
> over. This is driving me to drink!
> Any help would be greated appreciated!
>
>
Similar Messages
-
Copy and paste multiple text layers DW CC
I searched around and couldn't find a good solution to an issue I am having. I am solid with DW but by no means brilliant, so hopefully this doesn't come across as completely ignorant. Basically, I have a 400 plus page website that I have to do updates on often.. the way the client wanted it designed makes it problematic for updates regardless of my informing him that doing it differently could save us both a lot of problems, but at the same time, the site is actually perfect for what it is due to how it was done and no templating based site out there can do what it does so I am stuck with it for now. Each of the 400 plus pages has 6 individual text layers that had to be laid out according to the individual photo on each page, very specialized. My question is, is there a way to copy and paste multiple layers in DW. Small updates are fine, but larger updates are a nightmare due to the text issue and page numbers, and believe me, I have been up and down and around about how to make it easier.. but, that said, if I could copy all six layers at once and paste all six in the new document, life would be a lot easier on this project. I also tried linking the layers and sending them, but that doesn't seem to work for some reason.
Any thoughts guys?
Thanks much for your time.Thanks Jon, I will give that a try at some point, I am more on the designer end of things but I could manage to find the layers and give that a shot. I would love to show you the site, but the owner is very security conscious and only allows certain parties to see the site. I don't have any knowledge of background driven sites as web design is more of an extra thing when a client just really wants me involved. I am fine with the repetitive work.. if what you suggest works, it breaks my job down by 6 times and that would actually be a huge relief. Though I am over paid and hourly and the client has plenty of money, I just stop enjoying what I am doing with it after a bit to the point that I don't want to do it anymore regardless of the money. I have thought of subcontracting someone with more experience in the arena that could make it database driven like you are saying, but, it is just such a monster that getting someone else involved (especially with a client that keeps it so close) will be more work than it is worth. Fortunately, I think there will only be another update or two and then it will be finished as a collection. The site houses a world renowned textile collection half photo half info about the pieces.. my method thus far has been to keep the photos laid out in Lightroom, where I output the monster site in one of the simple flash sites and then add the text in DW.. I take the new photos and html and connect them to the new site and front thumbnail pages with my original which I have kept adding to over the years. To a degree it is decently quick and efficient, but when he drops or buys more than 10 pieces, and then needs to change photos, thumbs, and add text to anywhere but the last few pages, it can get into headacheland. With a major change, it would be faster for me to just reoutput the whole photo based flash site from LR and then copy and paste all six layers on each photo.. but as you know, that has been my issue thus far and what I get for only having my toes into a program.
Thanks for your reply.. -
Is copying and pasting multiple keyframes disabled?
I haven't used after effects for a year or so, but I am 100% positive that I was able to copy multiple keyframes or duplicate them just by holding down the alt key and dragging, or by hitting cmd+c and cmd+v. I'm trying to do that now but it copies the actual layers, not the keyframes and I found a plugin here http://aescripts.com/paste-multiple-keyframes/ that lets you copy and paste multiple keyframes .. I really don't understand why adobe would disable such a helpful feature, could anyone let me know if they have the same problem or am I doing something wrong? I'm desperate!
Thank you> I am 100% positive that I was able to copy multiple keyframes or duplicate them just by holding down the alt key and dragging
That has never been a feature of After Effects.
> hitting cmd+c and cmd+v
I just tried copying and pasting multiple keyframes using these commands, and it worked fine for me.
> I really don't understand why adobe would disable such a helpful feature,
We changed nothing in this area. -
Problems copying and pasting multiple slides from one captivate to another.
I have been able to copy and paste several slides into
another captivate and suddenly this has stopped working. I am using
the ctrl key to select multiple slides (a set of 3) and the using
the Edit drop-down to select copy slide. Then, I click on the other
captivate and click paste slides. It is only bringing 1 slide, the
first one, and not the 2nd and 3rd... any ideas. I've had another
set of eyes look over my shoulder... and we're both scratching our
heads.
Also, for some reason the text entry boxes are being copied,
but the failure caption associated with it does not come along. It
also copied the button but lost the association with the text entry
box. WTH?This might work, this might not. I have copy paste problems
on a regular basis and all that works for me is closing Captivate
down and then re open and continue. At worst, a reboot tends to
solve this glitch in my experience.
Good Luck -
How do I copy and paste multiple keyframes?
I've used previous versions of Final Cut in the past, but primarily have done my editing with Adobe Premiere. One of the companies I am freelancing for only has Final Cut X on their machines. I'm a bit confused about keyframes. Keyframing in the inspector seems severely limited. I could use some help.
Basic example: Say I want to zoom and pan into an image... then have it sit there for 5 seconds... then zoom and pan back to its original location. I can't figure out how to do this at all with Final Cut X.
In Premiere I would accomplish this extremely easily.
#1 I'd set my playhead at the location I'd like START my zoom IN/pans and set all my necessary keyframes.
#2 Then i move my playhead to where I'd like to END my zoom IN/pans, change all my parameters and this sets my necessary keyframes.
#3 I move my playhead further to where I'd like to START my zoom OUT/pans to where it originally was... and set all my necessary keyframes
#4 I move my playhead to where I'd like END my zoom OUT/pans to where it originally was... and simply copy and paste my keyframes from step 1...
The reason why I copy and paste my keyframes from step 1 is because often my parameters are very specific. I'm not necessary zoomed in 100% at the beginning with my position set exactly where it needs to be. Say, for instance, I'm working with an image that is zoomed at 75% and perfectly positioned at some random position somewhere in my frame... without the ability to cut and paste keyframes, I'd have to go back to keyframe 1 and write down all the parameters... then go to keyframe 4 and re-enter them. Massive pain in the butt.
How is this properly accomplished in Final Cut X? I can't even see my keyframes on the timeline... every tutorial I've found just says "set keyframe 1 and keyframe 2 in the inspector" and that's incredibly limiting.That is kind of a bummer, really. Maybe I'll need to adjust my workflow, but it seems like it's a MASSIVE drawback of Final Cut X.
For example:
Say I have an image on the screen at with Postion X: 97.3px and Position Y: -69.3px with the zoom set to 136.3%... (keyframe 1)
And say I want to move that image across the screen to Postion X: 32.5px and Position Y: -23.5px with a zoom set to 85.3% ... (keyframe 2)
Then say I want to let it stay in that position for 10 seconds ... after 10 seconds I'll set more keyframes by clicking the appropriate keyframe buttons and the settings will once again be set for Postion X: 32.5px and Position Y: -23.5px with a zoom set to 85.3% ... (keyframe 3)
Now say I want it to go back to the original position and zoom. In premiere I'd just highlight all my keyframes from Keyframe 1 and paste at the new location of the playhead... with Final Cut X, i'll need to go back to Keyframe 1 and literally write down on a piece of paper: 97.3, -69.3, 136.3% ... then go back to Keyframe 4 and type them all out. This is just a simple example, though. The more individual parameters I'm setting at specific points... the bigger pain this will be. Lame.
Even with the link you shared... it appears to be completely amature compared to the keyframe editing capabilities of Premiere Pro. In searching a bit on google to confirm the lack of features, I found someone else complaining:
"You cannot expand any parameter that has more than one attribute (like crop or scale or position) - making it useless.
You cannot add bezier handles to keyframes
You cannot copy and paste keyframes
When you copy and paste attributes, you have no choices as to how they will be pasted, etc... it is dismal.
All in all, it is a step backwards from FCP"
Personally, I'm a bit surprised... the more I learn about Final Cut X, the more I am starting to like it. I know a lot of professionals hated it when it initially came out, but I chaulked it up to unfamiliarity with the new software. For me, this keyframing thing is by far the biggest drawback I've found to yet. -
Copy and Paste Multiple lines into a single cell
Folks:
I need to copy some plain text data into a single cell that has been merged with other cells to provider a larger unit; however, every time I copy and paste my data it gives me an error. In addition, if I paste the data into a single cell, the next line
of data inserts into the next row.
I understand that Alt+enter is a quick way to do what I want, but I already have the data typed out, and I do not want to type the data again.
Example: (If possible I want in one single cell)
Disks=32
Total space=1.74TB
Used space=1.20TB
Free space=0.54TB
Thank you!!!Is there any way to do this but keep the source formatting? I don't see any "Paste Special" options when you do it this way.
That is not possible - when you copy/paste this way, you only copy the plain text, not the formatting. You'll have to apply formatting to the cell with pasted lines from scratch.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
Copy and paste multiple texts from Word to Indesign
Hello!!
I would like to simplify multiple operations where I need to copy multiple text boxes from a Word doc into multiple boxes in Indesign, and be able to specify the exact location of each box in the Indesign doc. For example, I would like to take 7 text boxes from a Word doc and copy them separately into 7 boxes in the Indesign doc, rather than have to go back and forth into the Word doc. 7 times and pasting each text box one by one.
See the screenshots
Thank you in advance,
EnricoThat looks a lot like case for Data Merge. It won´t give you any tools for copy/pasting multiple textboxes but with little work, you could make a template where you could drop multiple Items like you have in your screenshot. It won´t work with docs, but if you can convert your stuff to excel, then it would be quite nice solution for you.
-
Copy and Paste Multiple Layers (or Group)
I'm trying to copy a selection of multiple layers and then New - Paste to create a new document with the multiple layers. What's the best way to do this? Any suggestions?
dshock wrote:
Would work perfectly except the Crop doesn't work with Feathered marquee edges...
Testing it in CS5 shows that it does.
Crop works with any kind of selection here -
Vb Copy and paste multiple cells within DataGridView
this only can paste to 1 cells
how to make it can paste to multi cells
Private Sub CustomerDataGridView_KeyDown(sender As Object, e As KeyEventArgs) Handles CustomerDataGridView.KeyDown
If CustomerDataGridView.RowCount > 0 Then
If e.Control And (e.KeyCode = Keys.C) Then
Dim d As DataObject = CustomerDataGridView.GetClipboardContent()
Clipboard.SetDataObject(d)
e.Handled = True
ElseIf (e.Control And e.KeyCode = Keys.V) Then
PasteUnboundRecords(CustomerDataGridView)
End If
End If
End Sub
Private Sub PasteUnboundRecords(ByVal dgv As DataGridView)
Try
Dim rowLines As String() = Clipboard.GetText(TextDataFormat.Text).Split(New String(0) {vbCr & vbLf}, StringSplitOptions.None)
Dim currentRowIndex As Integer = (If(dgv.CurrentRow IsNot Nothing, dgv.CurrentRow.Index, 0))
Dim currentColumnIndex As Integer = (If(dgv.CurrentCell IsNot Nothing, dgv.CurrentCell.ColumnIndex, 0))
Dim currentColumnCount As Integer = dgv.ColumnCount
For rowLine As Integer = 0 To rowLines.Length - 1
If rowLine = rowLines.Length - 1 AndAlso String.IsNullOrEmpty(rowLines(rowLine)) Then
Exit For
End If
Dim columnsData As String() = rowLines(rowLine).Split(New String(0) {vbTab}, StringSplitOptions.None)
If (currentColumnIndex + columnsData.Length) > dgv.ColumnCount Then
For columnCreationCounter As Integer = 0 To ((currentColumnIndex + columnsData.Length) - currentColumnCount) - 1
If columnCreationCounter = rowLines.Length - 1 Then
Exit For
End If
Next
End If
If dgv.Rows.Count > (currentRowIndex + rowLine) Then
For columnsDataIndex As Integer = 0 To columnsData.Length - 1
If currentColumnIndex + columnsDataIndex <= dgv.ColumnCount - 1 Then
dgv.Rows(currentRowIndex + rowLine).Cells(currentColumnIndex + columnsDataIndex).Value = columnsData(columnsDataIndex)
End If
Next
Else
Dim pasteCells As String() = New String(dgv.ColumnCount - 1) {}
For cellStartCounter As Integer = currentColumnIndex To dgv.ColumnCount - 1
If columnsData.Length > (cellStartCounter - currentColumnIndex) Then
pasteCells(cellStartCounter) = columnsData(cellStartCounter - currentColumnIndex)
End If
Next
End If
Next
Catch ex As Exception
End Try
End Sub
Maybe the below code by
Rbie from below thread.
DataGridView Copy Paste option like Excel
Private Sub DataGridView1_CellMouseClick(sender As Object, e As DataGridViewCellMouseEventArgs) Handles DataGridView1.CellMouseClick
If DataGridView1.SelectedCells.Count > 0 Then
DataGridView1.ContextMenuStrip = ContextMenuStrip1
End If
End Sub
Private Sub CutToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles CutToolStripMenuItem.Click
CopyToClipboard()
For counter As Integer = 0 To DataGridView1.SelectedCells.Count - 1
DataGridView1.SelectedCells(counter).Value = String.Empty
Next
End Sub
Private Sub CopyToClipboard()
Dim dataObj As DataObject = DataGridView1.GetClipboardContent
If Not IsNothing(dataObj) Then
Clipboard.SetDataObject(dataObj)
End If
End Sub
Private Sub CopyToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles CopyToolStripMenuItem.Click
CopyToClipboard()
End Sub
Private Sub PasteToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles PasteToolStripMenuItem.Click
PasteClipboardValue()
End Sub
Private Sub PasteClipboardValue()
If DataGridView1.SelectedCells.Count = 0 Then
MessageBox.Show("No Cell selected", "Paste")
Exit Sub
End If
Dim StartingCell As DataGridViewCell = GetStartingCell(DataGridView1)
Dim rowCount = DataGridView1.SelectedCells.OfType(Of DataGridViewCell)().Select(Function(x) x.RowIndex).Distinct().Count()
Dim cbvalue As Dictionary(Of Integer, Dictionary(Of Integer, String)) = ClipboardValues(Clipboard.GetText)
Dim repeat As Integer = 0
If rowCount > cbvalue.Keys.Count Then
If rowCount Mod cbvalue.Keys.Count <> 0 Then
MessageBox.Show("Selected destination doesn't match")
Exit Sub
Else
repeat = CInt(rowCount / cbvalue.Keys.Count)
End If
End If
Dim irowindex = StartingCell.RowIndex
For x As Integer = 1 To repeat
For Each rowkey As Integer In cbvalue.Keys
Dim icolindex As Integer = StartingCell.ColumnIndex
For Each cellkey As Integer In cbvalue(rowkey).Keys
If icolindex <= DataGridView1.Columns.Count - 1 And irowindex <= DataGridView1.Rows.Count - 1 Then
Dim cell As DataGridViewCell = DataGridView1(icolindex, irowindex)
cell.Value = cbvalue(rowkey)(cellkey)
End If
icolindex += 1
Next
irowindex += 1
Next
Next
End Sub
Private Function GetStartingCell(dgView As DataGridView) As DataGridViewCell
If dgView.SelectedCells.Count = 0 Then Return Nothing
Dim rowIndex As Integer = dgView.Rows.Count - 1
Dim ColIndex As Integer = dgView.Columns.Count - 1
For Each dgvcell As DataGridViewCell In dgView.SelectedCells
If dgvcell.RowIndex < rowIndex Then rowIndex = dgvcell.RowIndex
If dgvcell.ColumnIndex < ColIndex Then ColIndex = dgvcell.ColumnIndex
Next
Return dgView(ColIndex, rowIndex)
End Function
Private Function ClipboardValues(clipboardvalue As String) As Dictionary(Of Integer, Dictionary(Of Integer, String))
Dim lines() As String = clipboardvalue.Split(CChar(Environment.NewLine))
Dim copyValues As Dictionary(Of Integer, Dictionary(Of Integer, String)) = New Dictionary(Of Integer, Dictionary(Of Integer, String))
For i As Integer = 0 To lines.Length - 1
copyValues.Item(i) = New Dictionary(Of Integer, String)
Dim linecontent() As String = lines(i).Split(ChrW(Keys.Tab))
If linecontent.Length = 0 Then
copyValues(i)(0) = String.Empty
Else
For j As Integer = 0 To linecontent.Length - 1
copyValues(i)(j) = linecontent(j)
Next
End If
Next
Return copyValues
End Function
La vida loca -
I currently use an iPad 2,how does one go about attaching multiple pictures to a yahoo email? Presently I am having to copy then paste each picture
Separately , going back and forth from my picture roll to my email. I tried to copy and paste multiple pictures but it would only paste the last picture
I copied. I am new to apple, so any help would be appreciated .If you use the Mail App and configure a Yahoo account you can then select up to 5 pictures from the Photo App and mail them as a single e-mail.
-
No copy and paste as single objects anymore???
What is going on with iWork-Suite.
We can not copy and paste multiple objects from keynote oder pages into iBook Author.
As soon as you copy more than one object it will be one object in iBooks Author.
For years it was working finde. ;(
Thats our problem...
https://www.dropbox.com/s/lhp5rtodeiyhrnk/iBA%20no%20copy%20and%20paste%20from%2 0keynote.pdf?dl=0
Thanx Andreaseastmac wrote:
I'm waiting since the New iwork is out for a fix from Apple.
As I explained before, use ungroup in iBooks Author.
In keynote5.3 i can select all and copy paste.
If i do this in keynote6.x.x. it will be one block in after we paste it.
I can not ungroup in iBook Author.
Anyway we use the old iwork and we have the better UI. -
Copy and paste, does the process slow down if...?
What is the optimal way to copy and paste multiple tasks?
My question is: Does the copy/paste slow down if I have multiple copy/paste processes at the same time?
Or, should I wait until each is done to continue the next task?
I have about 3 hard drives I'm trying to copy and paste to and from each other. Each transfer can range between 30-300 gigabytes
thanks for your input!You have to remember that copy and paste means that the OS must cache the data you're trying to copy, and this in turn means that it has to have enough free space to do so.
If your hard drive is almost full, OS X will have to move small files or file fragments around before it can cache chunks of the files you want to copy and paste somewhere. It has to cache them, in case you (or an exterior cause) interrupts the copying and pasting, so as not to damage the files.
Moving files is another matter, since the files don't actually change places, they're just indexed as being moved to a different folder or directory.
Bottom line is, the bigger the quantity of data you want to copy and paste, the more free space you need. -
How to copy and paste the same answer choices multiple times
I am making testing forms and each question has the same multiple choice answer selection. I have been having to type each one of them individually instead of being able to duplicate it for each question. How can I do what in Word would just be a "copy and paste" function?
So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors. -
How do I copy and paste text style for multiple video tracks?
hello,
I am creating multiple video tracks with text. I want to easily copy and paste the style, i.e., Font, Color, Size - rather than having to scroll down the giant list of fonts to find the one I want, then change the color, then change the size - each and every time. This is arduous.
I tried copy / paste of one text onto a new video track, but when I type in a different word, it alters the original.
I have 9 tracks of video for 9 different texts that will pop in and out of my video. I would like to be able to copy/paste then just change the text. This would save me a huge amount of time.paulrudophmusic
I know of no way to alphabetized the Adobe Styles that come with the program.
If you had the time and the inclination, you could rename them all to force them to appear alphabetically, but that does not seem all that practical.
But, if your interest is in the Styles that you save and you do not hit the Reset File List, the new Styles will be at the bottom of the list and you can name them so that they appear that alphabetically at the bottom of the whole Styles list. But that does not address the matter of you having to scroll to the bottom of the Styles list.
In some instances, some things that you think that you cannot do in Premiere Elements obvious features, can be done by computer keyboard shortcuts. I check the keyboard shortcuts under the Edit Menu/Keyboard Customization and unfortuately did not find any that would be applicable to this situation.
As for your changes in one text file popping up unwantedly in another text file, that is because you have text files with the same name. Look into creating duplicates (with different file names) in Project Assets at the onset.
ATR -
It's currently taking me ages to send multiple emails as I'm having to copy and paste the email each time. Does anyone know if there is a way that I can send the same email several times but that can be addressed (Dear....) to different people?
Oh at least just duplicate the same email several times so all I will be maunally inserting each time will be the address/name??? Please help!!!
Maybe you are looking for
-
EOL/EOS report generation fails
Hi, I am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco. Saw an update i LMS portal as this: Now Available! LMS 3.2:Patch for un-interrupted service of Cisco.com download for Device/Software/PSIRT
-
How do I retrieve videos shot on my iPhone4 lost after a synch to PC?
I have lost videos shot on a European trip on my wife's iPhone4 after a synch to her PC laptop running Windows Vista. With this setup, when I synch the iPhone it downloads photos shot on phone to Adobe Photoshop Elements v5.0. Photos appear in a ne
-
I have been trying to download previously purchased Audiobooks from the itunes store to my new computer and ipad. I tried calling the apple help line but they want me to spend $69.99 for the help plan. these purchases are over a year old and on my ol
-
Hi all, I created this Context: - ParentNode (1..1) --- ChildNode (1..N) ValueAttr (type String) In the init fase a fill the ChildNode with 10 elements. (VallueAttr[0] etc..) What i want to do is to bind all these 10 ValueAttr elements to 10 UI eleme
-
What is the category "calendar"supposed to do?
Hi, Been meaning to ask this for ages. I guess when iCloud got up and running and we all switched over to it, I realized there was a new category in my iCal category list. One that I didn't create. It's called "Calendar". Can anyone explain what it i