Copy and paste problems using adobe

Hello, I am having an issue using the copy and paste options from a secure site into a word document. It is giving me the option to copy, but when I paste it into my word documunt, it gives me a black box in the place where it should have been pasted. Please help me with this issue. Thanks!!

What does this have to do with InCopy?
Bob

Similar Messages

  • Copy and Paste Problem in Dreamweaver CS5.5

    Hi All,
    I saw the posts for Dreamweaver CS4 for copy and paste problems. I tried all the suggestions but to no avail.  My copy and paste would not work. Then I found what worked for me...
    I went to Edit --> Keyboard Shortcuts --> and I changed from "Dreamweaver Standard" to "Dreamweaver Mx2004". For the moment, it is working.  I am on XP Professional.
    From the other posts the suggestions were...
    Switch to Classic Mode
    Delete the Configuration file
    Uncheck "Enable related files"
    It was a problem for sure, and hopefully I won't be back for this one  :-)  Good luck

    Hello,
    The problem has been solved by over writing the � font.properties � file in jre/lib/� .
    The changes given as follows:
    # Exclusion Range info.
    # exclusion.dialog.0=0500-20ab,20ad-ffff
    # exclusion.dialoginput.0=0500-20ab,20ad-ffff
    # exclusion.serif.0=0500-20ab,20ad-ffff
    # exclusion.sansserif.0=0500-20ab,20ad-ffff
    # exclusion.monospaced.0=0500-20ab,20ad-ffff
    That is, we comment the lines having Red foreground color.

  • Copy and paste problems in iCal.

    I am unable to copy and paste from my clipboard into either the title block or in the notes section of an event.

    You can try this simple fix -
    Quit DW.
    Find this file -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "linzeloo" <[email protected]> wrote in
    message
    news:e1le9o$jp8$[email protected]..
    >I have dreamweaver open with the page open and the local
    site open to the
    > right. It doesn't matter which page I use - the same
    thing happens. It
    > doens't paste my copied text, instead it creates a
    copied page in the
    > local
    > site folder. I've tried using my shortcut keys - ctrl
    and c, then ctrl
    > and v,
    > and I've also tried using the 'edit' 'copy' from the top
    toolbar and the
    > same
    > thing happens.
    >

  • Hp prime Copy and pasting problems

    Does any one know why the HP prime copy and paste function does not work properly. For example when I copy and past form the spreadsheet to the statistics 1 var app nothing happens. Perhaps there is a work around that will allow me to avoid this problem or another firmware that I can download.
    Please note that i am using Software version: 2015 6 17 (8151)
    Hardware Version: A
    CAS Version: 1.1.2-11
    Operating System: 4CY35605VB I don’t think I’m doing anything wrong, however I should point out that when I copy from statistic 1 or 2 Var apps and paste to the spreadsheet app that everything works fine. The problem persists when when I reverse the direction, and copy from the spreadsheet and paste to the statistics 1 or 2 Var apps. I should also note that this problem does not occur with the HP Prime emulator.

    Hi!, mu271314: I'm have a HP PRIME GRAPHING CALCULATOR, with same Software Version and run OK. Try ...In the Statistic 1Var, write your data, p.e.D1              D2               D312                 9                  936                 9                  9  2                 9                  6Now, for copy you must, select with More, the option 3Select and 3BoxIn Choose Prog Function, select Row's and Column, as ...Row: 1                Column: 1Row: 3                Column: 3Press Ok. Now with arrow, select the box and press Shift+CopyNow, with Esc, select Apps, Statistics 2Var and StartIn C1, put block and press Shift+Paste ... 1{{12,9,9},{36,9,9},{ > Press Ok and 1 Grid data Note: You can see, with examples, from ... www-fourier.ujf-grenoble.fr/~parisse/calc/hprime.pdf 

  • Copy and Paste Error Using Dymo Printer

    I have small issue, I export invoices for my shop to Adobe Reader XI
    I then Copy and Paste the names and addresses to my Dymo Labelwriter 450 to make address labels. I am using Mac with OS X
    My Invoices have the Font, ADAM.CG, this is my default for my Dymo printer etc and also the font on my PDF document.
    When I paste this into my Dymo with Cmd + V the text is pasted but in Helvetica instead!
    Can anyone point me in the right direction to correct this, I know I can change each manually, but when I have many to do, this takes time.
    I have been in contact with Dymo and they replicate the same issue and say they can't help and to contact Adobe.
    Thanks,
    John

    It is a standard Magento PDF that is created, then opened in Adobe automatically by my Mac, then just use a standard copy and paste to my Dymo LabelWriter.

  • Copying and pasting  problem?????

    Hey, wondering if anyone can help.
    I am having problems copying and pasting folders to a memory stick or an external, and get this error code up (error code -36).
    This happens, whether the folder is a couple of KB or several GB. I am not sure what to do, any help is really appreciated.
    Thanks,
    Ash

    No, sorry I am on 10.6.2. I have looked on the internet, typed in the error code and cant find anything.
    I have gone onto the folder, right clicked and gone onto get info and set the sharing options to read & write for all settings.
    At the moment the only way I can copy and paste is to write the folder on a new folder and copy the contents in side, providing there is no folders in side.
    Thanks
    Ash

  • Copy and paste problem with regions

    I've noticed that occasionally, when I copy and paste a region within the same track, I sometimes paste twice (directly on top of the other region). Or at least that's the end result. When I realize this, I go to delete the region and then there's a region under that one.
    Except, it's very long, sometimes the length of the song. This wouldn't be a problem except it's uneditable. I can't trim it, loop it, cut it etc.
    Besides not pasting it twice in the first place, how can I keep this from occurring? Is it a bug? Why can't I edit the region? Thanx.

    I should probably mention that this happens primarily with audio instrument tracks.

  • Copy and paste problem  in JTextPane????

    Hello,
    Just I am tring copy and paste the following text in JTextPane (jdk1.3):
    "that�s right" I got "that[]s right"
    How to eleminate []???
    -redlotus

    Hello,
    The problem has been solved by over writing the � font.properties � file in jre/lib/� .
    The changes given as follows:
    # Exclusion Range info.
    # exclusion.dialog.0=0500-20ab,20ad-ffff
    # exclusion.dialoginput.0=0500-20ab,20ad-ffff
    # exclusion.serif.0=0500-20ab,20ad-ffff
    # exclusion.sansserif.0=0500-20ab,20ad-ffff
    # exclusion.monospaced.0=0500-20ab,20ad-ffff
    That is, we comment the lines having Red foreground color.

  • Can't copy and paste files using RDP session in server 2012

    I'm running windows 8, but I have also verified on a windows 7 machine as well. We have server 2012 installed on a machine
    I use remote desktop to get into. I cannot copy files from my local pc and use paste to get them to the server. I could do this with server 2008. Is there some setting I have to change or does this not work with server 2012?
    FYI, clipboard is checked when I open my remote desktop connection window. If I connect into a win server 2008 r2 machine from the same local machine, I can copy and paste files
    just fine.
    - Michael

    Hi,
    I believe RDS clipboard redirection should be enabled by default also on Windows Server 2012. Is there perhaps is a Group Policy Object active that is configured to disable Clip Board Redirection? Either on the computer or the user OU. If not:
    You did not explicitly state this, but I'm assuming that you are running in Application Mode (meaning you did not install the RD Session Host role) ? If so please check the registry on the Windows Server 2012 destination server and look for:
    HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Winstations\RDP-Tcp\fDisableClip
    this should be set to
    0, to make allow Clipboard Redirection
    Also check the key below:
    HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server\Addins\Clip Redirector
    This should have: 
    Name
    REG_SZRDPClip
    Type
    REG_DWORD0x00000003
    If you did run the RD Session Host role, and you have done so using a Scenario Based Deployment (Scenario
    Based Deployment of RDS in Windows Server 2012 ) you will have a Remote Desktop Management Service GUI available as pat of the Server Manager with which you can enable or disable ClipBoard Redirection from within a GUI on a Session Collection level
    or you can use PowerShell
    Using Powershell to install, configure and maintain RDS in Windows Server 2012
    Kind regards,
    Freek Berson
    The Microsoft Platform
    Twitter
    Linked-in
    Wortell company website

  • Any news to the copy and paste problem with osx 10.9 ms rdc client?

    we have a new macmini with 10.9 and we work with microsoft remote desktop client 8.0.5,
    since we use this combination, we can´t copy and paste text between both systems...
    regards
    shift_f7

    Hi,
    Yes, it is not supported in the current versions.
    The workaround is to use folder redirection.
    Folder redirection enables access local folders during the remote session. Click the + button at the bottom of the dialog and choose a folder you want to have redirected.
    Configure Folder Redirection
    1. Click the + button.
    2. In the Add Local Folder window, enter the following information:
    • Name: Set a name for the folder to be available during the remote session.
    • Path: Select the path to the folder to be available during the remote session.
    3. Click the exit button to save the remote desktop.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Copy and paste problem in Netcape

    I have a text field on a jsp page, sometimes(not all the time) when I copy and paste text into that field in Netscape it will add spaces in front of the text, it looks like it might be right justifying the text in the textbox. This happens only sometimes in Netscape and never in IE. Has anyone ever heard of this and if so does anyone know of a fix?

    I guess one of your components (source or destination) is a textarea. It must be written like this:
    <teaxtarea></textarea>
    without any spaces like this:
    <teaxtarea> </textarea>
    and without line breaks like this:
    <teaxtarea>
    </textarea>

  • Cut,copy and paste functions using the mouse

    Hi.
    I'm a new mac owner and have read that I should be able to do the above. Is that correct, and if so how can I get my mouse to cut, copy and paste text. I can do it through edit but am unable to do so by right clicking.
    Thanks for any help in advance.

    Works fine in TextEdit and Pages - select text by clicking-and-holding and dragging the mouse across it, releasing, then right or control-clicking to bring up the contextual menu which includes these functions. (If you just right-click in TextEdit it will highlight just that word and bring up the menu). It doesn't work in, for example, Safari when entering text as in this forum or reading a web page.

  • Copy and Paste problem in Leopard

    I am archiving thousands of pict files to dvd, in OS 9.2 I simply open the window select all files, then copy all the file names and paste into my dvd cover index in Pages. This has worked fine.
    The problem is in Leopard it copys the actual files, not the names.
    Can you help.
    Mike

    I am not overly familiar with what you are trying to do, but it sounds like you could just create and alias of each file and copy that to the DVD.
    • Select file
    • Right-click / Control-click
    • Select 'Make Alias'
    I encounter similar requirements for cataloging large numbers of files spread across multiple disks/CDs/DVDs and use CD Finder (http://www.cdfinder.de/), which has proven to be perfect for over 3 years now.

  • Copy and paste problem

    Yesterday something strange began happening. I copied all of the text in a document, opened a new page and pasted. However, the paste put what appears to be a text box on the new page. When I dragged the borders to the page size, I only had one page of a three page document copied. I've tried it with other documents with the same results. If I physically highlight the desired text and copy it, everything seems to be normal. Have I done something to affect the "copy all" command?

    Pages has to types of documents. Word processing and Page Layout. I think you opened a blank PL document. It will always have text in boxes, and when the box is too small for the text you will get a plus sign at the bottom.
    Open a WP document instead and paste the text. It will flow over to a new page if needed.

  • Cut copy and paste problems

    wondering if anyone else has noticed this yet.
    when copying it sometimes runs words together that weren't ran together before it was copied.
    example... in a very long sentence where there is a line break, it will run the word at the end of the line break into the word at the beginning of the next line when it wasn't like that previously. It doesn't do it to every line in the copied text, just some of the lines...it is very annoying.
    anyone else notice this yet? I noticed it in email..so if you have a fairly long email, copy it and paste it into another email and read it to see if it copied properly.

    no one? darn.

Maybe you are looking for