Copy and Paste Query

Does anyone know how to copy a query from one infocube to another? I tried trans code RSZC but it did not work as I anticipated.
As always, thank you in advance for your help!

Hi Shelly,
RSZC will only work if the cube that you are copying the query to (target) has all the InfoObjects (chars and KF and Nav Attr) of the cube from which you are copying the query (source). This is required even if all of these are not being used in the query. When you try using RSZC, the system will point out what is different...if it is something just like nav attr then you can easily maintain that in the target cube for the sake of copying the query, but with missing chars or KF this may not be possible to do...in that case you will just have to recreate the query.
Another option is to create a multiprovider based on both these cubes, copy the query from Sourec cube to Multiprovider, remove the source cube from the multiptovider, and then copy the query from multprovider to the target cube.
Hope this helps...

Similar Messages

Copy and paste query in CS3 Action

Hi
Some help for an inexperienced user please.
My plan is to open a main image, plus 4 additional images, then record an action to be used with 5 images open. I have a "Stop" inserted at the beginning reminding me to have 5 images open before proceeding.
It will initially copy each of the 4 additional images and paste the content as a new layer in the main image, then close the additional image. This stage will end with only 1 image open with the 4 new layers, ready for the next stage.
In essence I have it working, but it is causing some problems.
Sometimes the Action script says "Select document +4", other times "Select Document -4", and other times "Select Previous document".
I'm kinda assuming the the problem comes from the "referencing" of the docs, but unlike layers, I presume I cannot give trhem specific names for use in the action.
Does it matter in what order I open the 5 images? Since the action is being written using the "main" image, it is always on top and selected when I start.
It also seems to matter in what order I do things. Am I right in assuming I should wait till all 4 layers are pasted before I close any images, as this seems to be causing an issue as once I close 1 image there are only 4 left, so the "referencing" is corrupted.
It should be simple, but when I try it with different images it does not work.
Any commnets welcome.
Thanks
Colin

Just spotted that some of the images have a copyright symbol in the file name at the top line and along the status bar of the document window. This symbol is NOT in the file name. The images are all taken by myself and my wife, so I know they are ours. Not sure if Lightroom is "adding this" or where it comes from, or more importantly what effect it has.
Could this be anything to do with my problem?
Colin

Copy and Paste text from Tabnavigator?

Within a tab navigator, I am using a canvas that contains an
mx:form and mx:formItem to display the query results. I would like
to be able to give the users the ability to highlight the text
displayed to copy and paste. Is there a built-in option that allows
this?

selectable="true"

Copy and paste cell content of web form of Hyperion Planning

Our end users encountered performance issues in using the web forms of Hyperion Planning. We have some large web form with 60 columns and 100 rows i.e. around 6000 cells. When end user move around the cell they feel a slow response in the web form especially when copy and paste some cell content from one row to another, or a few cells from one position to other position.
Anyone got similar experience in using web form? Also we understand that Hyperion design will check the cell content of each cell and generate a SQL query to the backend metadata database. It is quite time consuming and waste CPU resource because most of the time our end user will not keep the text information under each cell. We have consulted Oracle team and understand that we cannot disable the cell content checking via SQL query.
Any workaround solution exists to reduce or remove the performance issue in cell content copy and paste?
Thanks!

Hyperion user wrote:
Alp Burak wrote:
Hi,
We had faced the same issue a few years ago. One of our geeks had done a change in either Enterdata.js or Enterdata.jsp which disabled form cell validation. I don't currently have the code with me but it wasn't a big change really, remarking a function could be doing the trick.
I don't think this is officially recommended by Oracle though.
AlpThanks for your advice. We will try to locate the enterdata.jsp and enterdata.js and found out where the SQL being executed.We found out the Enterdata.js under the deployment directory of Weblogic. However it is over 400KB size and many many lines of codes. We think that it is very difficult to locate where should be customized to remove the SQL checking on cell content.
\\Hqsws04\hyperion\deployments\WebLogic9\servers\HyperionPlanning\webapps\HyperionPlanning

If I copy and paste a comment in a pdf, when I create an xfdf file the copied comment isn't included. Is there a way to add these copied comments to the xfdf file?

If I copy and paste a comment in a pdf, when I create an xfdf file the copied comment isn't included. Is there a way to add these copied comments to the xfdf file?

Hi Steve Whipple,
This Link (Acrobat Help | Importing and exporting comments ) seems relevant to your query. Please let me know if it helps you export comments to xfdf file.
Regards,
Rahul Tyagi

Copy and paste - Restricted KF - Left panel

Hello All,
This is quite a silly question, in BI7 I cannot copy and paste a restricted KF in the left panel.
Options are there but it's not working.
Is this another bug in BI7 ?
Thanks
C.

Hi,
check this thread:
BI Query Designer - Copy and Paste
Hope this helps.........
Rgs,
I.R.K
Edited by: Ravikanth Indurthi on Jul 31, 2008 6:37 PM

In iPHOTO it won't let me "choose any of the original pictures to include in an email or even copy and paste them else where? Why ?

In iPHOTO I can highlight a photo to include in an email, but after I select the a photo, the "choose" box will not darken to let me choose that photo or any of my original photos to put them in an email or even to copy and paste them else where.
The only changes I have done is the original photos were taken with a different digital camera from the one I use currently. The newer digital cameras photos can be selected and emailed just fine. What is not being recognized by the iPHOTO programing as to not let me select (choose) to older photos taken by the older original digital camera?

Thanks for the response to my query on emailing photos from iPHOTO. To answer your questions:
1. When I first connected my new digital camera to my iMAC and installed it's program from it disk, all went well and that program with Icons are currently on my desk top. When I down loaded pictures from this new camera into iPHOTO, I was asked if all pictures from this camera were to be down loaded into iPHOTO only, I answered yes.
2. I did nothing to the photos in iPHOTO, they are my original pictures setup in various groups and are not thumbnail copies of the originals.
3. And yes, I have tried to attach photos from iPHOTO directly into an email message in both Apple's MAIL program and even through my AOL service provider account to no avail. I get the same issues of not being able to choose older pictures for insertion in an email message, only newer pictures taken with the new camera.
4. I have even gone back into my external back files and restored older versions of iPHOTO and the same thing happens.
5. I have even thought of uninstalling the unused new camera's desk top files, but since there is nothing in these files and both my new and older cameras are Canon models, I can see no issues for removing the new camera files?
I hope this extra detail is lear to you and again tell for your assistants.
clarence

Can we do copy and paste on calculat keyfig

Hi BI Experts,
i want to create same calculated keyfigures with minor changes repeatedly .................so is there any possibilities to copy and paste calculated keyfig.............i tried copy but its not giving option paste enabled, i also tried doing copy and save its also not working.
is there any possible to do this??
Thanks
Tulsi ram

Hi Thulasi,
You can very well copy CKF and paste it in Query i.e,similar to drag and drop.
But the issue is you cannot modify a CKF once you dragged to query.so copying wont really serve your purpose
I still prefer the option of creating a local formula.otherwise you will see whole bunch of CKFs in the left side and diificult to trace which one is used in which query
Sriman

BI4 :Copy and Paste Charts Settings

Hello,
I'am using a BI4
Is is possible to copy and paste chart settings in Webi.
I have 8 charts coming from 8 differents query.
I want to apply the same charts settings in the same time.
I need to click on each charts and readjust all he settings.
Thanks for your help

Hello,
When i write click on charts format i'am not able to change dimension and measure
I do not find the option in the charts menu?
So i need to turn it into table change the measure and dimension and turn it back into charts.
When i turn it back into charts default settings are back.
Regards

After i have upgraded to snow leopard my copy and paste commands are not working

hello, i am very frustrated now, it's been two weeks since i have upgraded my mac os to snow leopard but the copy and paste commands are no longer working. i have searched thru the communities but i cannot find something that answers my query. please help as i do not want to resort to downgrading back my OS. thanks in advanced.

Maybe here http://support.apple.com/kb/HT3964
If you do not have a removable battery
power down, power back up and hold the following keys, left side shift, control, option. Hold these keys till the gears stops spinning, release. Reboot.

Hi, I was trying to copy and paste a lot of info for one day on my calendar to another day and an error message popped up saying that the system responded with an error. Msg won't go away I force quit ical

Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?

K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality.

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter

Cannot copy and paste descriptions in PDF Portfolio

I am using Adobe Acrobat Pro 9.5.1 on a Windows 7 laptop. Since a recent update I am unable to copy the description in a PDF Portfolio and paste it back. I used to be able to copy the description; delete the file; add an updated file and then paste the description back. Now I have to re-type the description. I cannot event copy and paste a description from another PDF portfolio. Can you advise why this is so and is there a workaround?

Adobe does not report the progress of bug reports to the public, nor can I comment on the timescale for any future updates or what they may contain. Priority is of course given to the current Acrobat X Family and recently-announced Acrobat XI Family.
Copy/paste between all the file details fields in PDF Portfolios is fully functional in Acrobat X Pro (which currently has a captive install of Flash Player) and in Acrobat XI Pro (which does not). I don't have an install of 9.5.1 to test your bug report against, but whatever is causing the issue in your case it's not an intentional change.

Copy and Paste Query

Similar Messages

Maybe you are looking for