Copy and Paste section of a sequence...

Is it possible to copy a section of a sequence, including all tracks, transitions, and effects contained therein, and paste it into another sequence? In other words, perhaps by setting IN and OUT points in the Program Monitor, copying that area, and pasting to another sequence. Including all tracks and effects contained therein.

You will also find links to many free tutorials in the
Premiere Pro Wiki that will quickly show you how things are done in PPro.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 300 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Similar Messages

  • How di I copy and paste sections of pages

    How di I copy and paste sections of pages

    There are extensions that can do that:
    *Abduction!: https://addons.mozilla.org/firefox/addon/3408
    *FireShot: https://addons.mozilla.org/firefox/addon/5648
    *Pixlr Grabber: https://addons.mozilla.org/firefox/addon/9924/
    *WIPS: https://addons.mozilla.org/firefox/addon/146364/
    See also http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X

  • Copy and paste clips to anamorphic sequence...having trouble

    I captured all my broll DV/DVCPRO NTSC Anamorphic. I started editing on a sequence that was not checked for anamorphic under Sequence Settings.
    In order to fix this, I created a new sequence with the anamorphic box checked and copied all of my edits from the previous sequence. Now it seems like the anamorphic has been applied twice, like it seems widescreen twice over.
    I was wondering if it were possible to copy my edits from the wrong sequence and paste them into the sequence with right settings, while keeping the correct anamorphic view. If not, then it seems I would have to redo all my edits on the correct sequence.
    Thanks in advance,
    Jeff

    Jeff, when you copied and pasted your edits then those clips retained all previously applied settings, filters etc, including those distortions automatically applied by FCP that made your anamorphic clips display properly in the older non-anamorphic sequence .. what you need to do is to remove those distortions:
    Select all the clips in the new timeline (Cmd-A) then invoke the Remove Attributes dialog (Cmd-Opt-V) and put a tick in the Distort checkbox, then click OK.
    That should do it ... although if you did any intentional distortions then those will have to be redone as they will be removed along with the automatic anamorphic distortion.
    Cheers
    Andy

  • Copy and pasting between Sequences

    I edited a 3-camera HDV mulitcam project. It was perfect. No problems.
    I created a second sequence in the same project. I copied and pasted part of the Sequence One Timeline into the Sequence Two Timeline.
    The video in Sequence Two does not look as good. Why?
    It's the same video. Why the difference? Will the quality also be diminished after exporting to DVD and/or YouTube?

    Please give the exact item properties of the clips you're editing and the exact item properties of the sequence in which you're editing. Select a clip in the Browser and press Cmd-9 or Edit>Item Properties>Format. Select a sequence in the Browser and repeat.   

  • Copy and paste from one timeline to another results in audio problem

    Hi,
    I'm trying to create a showreel by copying and pasting segments of edited sequences from the original timeline into a new 'showreel' timeline (in a separate project).
    I keep having a problem with the audio when I paste the sequence. Dialogue seems to repeat, even though on the timeline the video and audio lines appear exactly the same as they do in the original timeline. I've tried to copy and paste the individual audio clips separately but it still seems to cause the same problem.
    I've searched the discussion boards but can't seem to find any threads describing a similar problem.
    If anyone has any advice I'd be really grateful.
    Thanks..

    Shift-drag.

  • Have Adobe Xl and don't know what I need to copy and paste from a PDF to Microsoft Word.  Please help!

    Have Adobe Xl and don't know what I need to copy and paste sections from a PDF file to Microsoft Word file.  Please help

    Hi,
    Check if PDF document has renderable text. Go to Tools -> Text Recognition -> In This File.
    Then you should be able to copy the text from PDF.
    Regards,
    Anoop

  • How do I copy and paste text from a pdf file and paste it into a new pdf or word file?

    I have a very large pdf file (500 pages) comprised of 200 letters.  How do I copy individual letters (copy and paste sections of the file) and put them in a new pdf or word file?
    Thank you

    Hi drredwood,
    When you open your PDF file a yellow bar will appear on the top of the screen.
    Click on 'Enable All Features'.
    Then you will be able to copy the content from your pdf and to paste in any of the file.
    Regards,
    Florence

  • Premiere Pro CC(2014) crashing when copying and pasting clips

    Has anyone found Premiere to hang when copy and pasting clips from one sequence to another, or even within the same sequence.
    Sometimes, it hangs then comes back to life.  Other time I just have to force quit.
    Thanks

    I don't recall reports of such a problem. We'll need more info to attempt to troubleshoot the issue. Start with the prompts on this page: FAQ: What information should I provide when asking a question on this forum? Especially the details on your computer.
    Also, please report the following:
    the types of content in your sequence, particularly in segments you're pasting. The source(s) of the content, the codec(s), the duration of copied segments?
    where the content is stored?
    whether either sequence was imported from a third-party program via XML or the like?
    the sequence settings of both sequences?
    what effects & transitions are in use, particularly in the segments you're pasting?
    what is resource usage before and during the copy/paste operation? Is a CPU getting pegged? Does memory usage spike precipitously?

  • (CS4) Copy and paste video/sound into another project, sound won't export

    Hello Adobe community
    I am working on a TV show for a community television network in Australia.  I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I  export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
    I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
    I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
    I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
    I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
    Thanks for your time! I have a looming deadline so your help is much appreciated.
    -Robert

    Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
    I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you  mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
    However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
    Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
    This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
    Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
    Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
    Thanks heaps for all your help!
    -Linus

  • How to copy and paste more than one section at a time

    hi all,
    Im new to GaragBand and need to know how I can copy and paste an entire section...I've layered vocals and want to make it sort of a hook and cant figure out how to move it past the second verse. ( I dont want to have to record the same thing that many times.) Is this possible? Is there an easier way I can get the layered effect?
    Anything will help..
    Thank you much!

    If i ever win a grammy. ill thank u...ok one last thing...is there a way to sort of consolidate tracks? sometimes there are a few...quite a few and some stuff could be on one but i need it to not cut out any of the other parts

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • Trying to highlight a section of text on a web page. Then copy and paste in Word. Just upgraded to Win7. Can't highlight text.

    Trying to highlight a section of text on a web page. Then copy and paste to Word. Just upgraded to Win7. Can't highlight text. Won't work in IE either. Think it is a Win7 issue.

    Hi Cousins --
    Glad to have helped!  Thd dots indicate the level of helping --
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    I was thinking this may help you in your conversion from "the dark side," LOL.
    It's an article just for switchers:
    http://www.apple.com/support/switch101/

  • Copy and Past Nested Sequence loses link to Master

    Has anyone else noticed this problem? I've got a nested sequence that I'm cutting and editing around and most of the time everything is fine. If I doubleclick the nested sequence in my main sequence, it opens the nested one and if I then double click the nested sequence in my Browser, it goes to that same sequence. Changed in one will show up in the other.
    BUT, if I copy and paste the nested sequence in my main sequence, the new pasted version will open a NEW sequence that isnt linked to the Master in my Browser. So now, changes in the new nested sequence or the Master dont show up in the other one.
    Is this just me thats having this problem?

    I can see where you are coming from, and where the engineers at Apple were coming from, but I strongly disagree with this behavior. In my opinion, if you want to have a separate copy of a sequence, you should make a copy in your bin and bring that in. That way your new sequence HAS a master sequence and you can CHANGE the name, both of which help to avoid confusion.
    So, maybe you're right and most people prefer it the way that it is, but let me explain the workflow I'm using and you'll see why this is so absolutely frustrating to me.
    I'm editing a documentary in Chinese and as I dont speak Chinese, I've had it all translated, and added subtitles to the interview footage so I can edit it. And to make absolutely sure that the subtitles and footage stay in sync (since I wouldnt know it if they werent) I've put all the footage into separate sequences and I'm editing those sequences as if they are raw footage.
    And due to this, I'm throwing sequences around every which way while I try to create my story. And sometimes that means copying a series of edits into a new timeline to work on separately from the larger project. And as I see it, there is NO WAY to do that currently and keep the sequences linked to the masters, other than pulling up each master sequence into the Viewer, changing the in and out points to match the clip I want and Inserting it into a new timeline. And when you want to copy over a segment that has perhaps 20 edited bits, thats WAY too much trouble.
    So I'll admit that I'm editing in a somewhat abnormal way due to my subtitles, but as there is no way to copy and paste sequences and keep the link to the Master, I think the behavior is broken.
    Oh, and the "Tools->Create Master Clips" command, which is supposed to relink clips to their masters if there are any in the Browser, doesnt work for Nested Sequences.

  • Copy and paste action sequence?

    i have an action sequence set to play on application start, but i also want to set it up to play whenever a user navigates to that specific page

    Hello.
    You can't copy-and-paste action sequences yet.
    But you can if you were to open it in Flash Builder, but this would require a lot of 'fiddling about' with.

  • Is it possible to copy and paste (or replicate) selected sections of a form to reduce form construction time?

    I am building a very large form which will have the same group of question response choices repeated multiple times in the form.  Is it possible to replicate/duplicate these sets of identical response choices (by say, copying and pasting)?  Thank you.

    Hi Ned,                                                                                                                                                                      B"D
    Thank you for giving an idea how to solve my problem.
    You suggested to save a page as an .html in Word.
    This is what I did:
    1. In Word I formated title as Heading 1.( Formating-->Styles and Formating)
    2. Saved the page  as an HTML file.
    3. When I  pasted  this page into Dreamweaver  <h1> TAG was displaced in the source code.
    cheers,
    Dreamer101.1

Maybe you are looking for