Copy and paste temp setting

LR3, OSX.
I want to copy a temp change and apply it to another image, how do i do this?
In Develop settings copy, it isn't there, synching doesn't do it.
Any help, much appreciated.
Alex

Change image 1.
Go to image 2 and click Previous.

Similar Messages

Copy and paste JPG into email not working

Upgraded to Yosemite 10.10.2 yesterday from Snow Leopard. iMac from 2009. Copied JPG from web page and pasted into email. Looked fine. Sent email to myself. When I read email, the JPG photo is replaced with small blue box with question mark. This always worked flawlessly prior to the upgrade. I tried the terminal with defaults write com.apple.screencapture type jpg to no avail (screen snip and paste behaves the same as copy and paste). Set the defaults back to png ... verified with a defaults read. I'm missing something, but I can't tell what.

To reassure you: You don't need to do anything to trigger these issues. ;-) They happen regularly, yet under lab conditions there seems no clear way to nail them down... Most of the time restarting the system and starting with a clean slate gives back the functionality.
Mylenium

Migration Assistant/ Set-up Assistant/ Copy and Paste/ Other?

Hello Wise Ones,
I have just installed a new HD and am wondering how to transfer my old files, a sparsebundle/image, from an external HD to this brand spanking new HD.
For context,
1) Acquired an external HD.
2) Saved a File Vaulted account onto that HD (Western Digital HD; used WD Smartware).
3) Upgraded from Tiger to Snow Leopard.
4) Time Machine backs up the information of Guest account but not the main account, the Filevaulted account.
5) Rigamarole follows, but sparsebundle/image becomes mountable and files accessible.
6) Internal HD fails.
7) New Internal HD installed just yesterday.
8) Migration Assistant restores the Guest account files. But the sparsebundle/image is not an option.
So, as it stands now I have two accounts on the computer: the newly created account and the migrated old (Guest) account. I seem to have all of the programs I think I should have. But, as you might imagine, my Documents, Movies. Pictures etc folders are empty.
The external HD shows me all of my created files. So, if need be I can just copy and paste those Documents, Movies, Pictures, Desktop folders, yes? (Alas, Migration Assistant doesn't -- um, pickup, recognize -- that sparsebundle/image.)
But what of the inner workings? Most notably, what of a Library folder. I see it there on my sparsebundle/image. It appears to be on the same tier as the Documents, Desktop, Movies folders. Meaning, I'm guessing that this Library folder is personal to this account, not to the computer as a whole. Therefore, if I select my account found on the new HD and find its Library folder, and then paste over it with this sparsebundle/image Library folder then all will be okay? Thus I'll have all of my mail messages/inboxes and all of my Safari Bookmarks and other goodies?
So, um, the best way to proceed? Migration Assistant; Set-up Assistant; Copy/Paste; or other?
Thanks again for your insights and patience.
Lex
P.S. Would it matter that the the sparsebundle/image folder has an account name that is different than the name for this new drive and this new personal account? So, damaged HD was named Lexy. But sparsebundle/image account has the name Lex. With this new HD the HD is named, Smith and the personal account is named LexSmith.

Not sure about the File Vault password protected thing is the problem with migrating. If you have room on the drive, try opening up the image and copy the user account from the image file straight to the drive itself, thereby eliminating the use of the image. Then try the migration.
Other than that, I can only suggest manually copying the files from each folder to your new user folder.
If it's your whole user account and it's a different name than the user account on the new computer, you might try to copy the whole user account over to the user folder and then see if you can switch user to that account.

I no longer see the URL of any website so can't copy and past URLs into any emails, etc. Is there some setting to make URLs visible? when I updated, the URLs disappeared. I'm on a MacBook.

When I updated to the latest version of Firefox, the URLs disappeared so they are no longer visible at the top of the Firefox page. I can enter sites, but I can't copy and past the URLs anymore. Why can't I see the http://... info anymore? Is there some setting I changed or what might be the problem?
thanks.
TVDoc

Try this:
Click on the orange Firefox tab > Highlight Options > click Navigation Toolbar.

How can I set firefox t o allow cut, copy and paste?

I am needing to cut info from a college course homepage I am teaching and paste it into another course I am teaching. How can I cut, copy and paste in mozilla firefox?

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/
You can use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete

How to revert copied and pasted Develop Settings to raw files.

Using Bridge 2.1.1.9 and just discovered this handy workflow scheme.
Was wondering if there was a way to go back to the previous setting after applying a Develop Setting copied from another file within Bridge. There doesn't seem to be or at least I haven't found a "Command Z" option within Bridge.

Good points, Omke.
I've duplicated my Pentax PEF's and they do retain the .xmp embedded edits without being converted to DNG.
And I do save custom named edits using the traditional method in ACR, but you should see the list I've accumulated. It's huge. Most have come about due to my experimentation with target scenes I've created to come up with some setting that could be applied to a series of scenes lit with available light to make them all look like they came out of the same camera. I don't own expensive studio lights. I shoot landscapes and animals at my local park.
I just love the immediacy of copying and pasting .xmp exported tweaked edits from another image and applying to a series of scenes shot under the same outdoor light. I have my image thumbnails sprawled out in Bridge so I can get an overall view of their differences. It would be nice to revert back to the previous .xmp exported edit after a copy and paste.
But it doesn't really matter anyway cuz most just need a tweak to color temp, clarity and vibrance adjust to get them to look alike with regards to color. Exposure differences are far more time consuming and require opening each one in ACR.

Can no longer copy and past jpg and gifs into InDesign from c:\user\doc\pics

Here is the error message we get when doing a copy and past from the hard drive to InDesign.
Error Message from InDesign:
Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing...
First, do I need to add a plug-in to be able to copy and past jpgs and gifs?
Second, we have always used clip organizer with no problem. Ability to copy and paste jpg & gif suddenly stopped. We get a box but no image ont the page. Have already tried dumping temp internet files through internet explorer. Have already un & re installed InDesign and repaired and fixed everything I could think of.
Third, we can use the place command to place jpgs but can not place gifs.
William (Helping Mrs. White)

It sounds as if Mrs White needs to search visually for graphics and then place them. She can either set Windows Explorer
to thumbnail view and drag a graphic on to an InDesign page - this will in effect be placing the graphic, not copying
and pasting, and is the right way to go. Or she can use File > Place, and set the view in the Explorer window that she
selects from in the Place command to a thumbnail view to see the graphics.
GIFs can be placed. They are not a recommended format, but if you are placing clip art then you may have no option.
So, in answer to your original question, no, you don't need a plug-in to place JPEGs and GIFs. But note that is place,
not copy and paste.
k

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do I protect it again?

I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?

You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter

Acrobat XI Windows 7 - unable to (copy and) paste form fields to a different pdf.

To maintain a consistent appearance and function in the forms I create for various departments, I copy a few form fields (text, checkboxes) from an unrelated Acrobat PDF. Then I paste those fields into a different PDF document that I am making fillable.
I do this because Acrobat does not allow setting a default for certain attributes when creating form fields, i.e. an unchecked scroll option, a default font other than Helvetica (in Acrobat 8, 9, and X). Plus it is time-saving to copy and paste fields that are the same in another PDF, like name, address, phone. etc.
We just updated to Acrobat XI and Windows 7 and now I cannot paste copied fields onto a different PDF.
Using "replace pages" is not applicable as I am pasting to an entirely different form and copying form fields with the settings I use.
Is this a glitch or is something new that was not in Acrobat 8, 9, and X?
Also, question regarding this forum entry - http://forums.adobe.com/message/5638333#5638333 - which is somewhat different from my current question.
The PDF creator could not paste copied fields on other pages of the same PDF. Was this ever resolved so that copy and paste worked as it has for the last 3 versions of Acrobat?
Thanks!
Joanie

Gilad: You're right: when the fields are different, such as a checkbox and a text field, and you try to title them the same, Acrobat gives you a message. I received no messages, the field names are not the same or I missed one and Acrobat is no longer messaging about it.
My question is different. Acrobat XI will not let me paste any field copied from a different PDF. I've been doing that for 5 years in three different versions. Maybe Acrobat XI has a new process for that, which I could not find in Acrobat help. Maybe it's because all forms now have extended rights automatically in Acrobat XI and there is another method to copy common fields to other PDFs.
Any thoughts about the new Acrobat XI? It's different in many good ways, but different.
Thanks for your ideas.

Problem with copying and pasting text blocks in Fireworks CS5

Until recently when I copied and pasted a text block in Fireworks CS5, the block would retain all formatting applied to the copied text block, font, size, color, etc. Now, the pasted block reverts to some default setting. Oddly, if I copy multiple text blocks, the formatting is retained as expected, but not if I copy a single text block. I cannot find a preference that affects this, and I cannot figure out what might have changed. The current behaviour is definitely not desired, and is dramatically affecting my efficiency. Anyone experienced something similar or have any ideas how to correct this? Thanks.

Sure, thanks for replying so quickly. My workflow is simple. My problem is limited to copying and pasting within Fireworks. I typically select an entire block with the main selection arrow but I sometimes use this one too depending on the context. I usually just use the keyboard CTRL-C then CTRL-V to paste. Previously (and I have been using FW for years, it's always been the same) it would paste an identical text block directly over the top of the copied one, and it looked exactly the same, same font, same color, etc. Now, it pastes a new block in the center of the document and all the formatting has reverted to what I guess is the default, in this case Myriad Pro 12pt. The behavior is the same no matter which arrow I use to select the text block. I tried Edit>Copy and Edit>Paste, the effect was the same. The Duplicate function seems to work as desired, but I had never noticed or tried that command before reading your post. Using the keyboard to copy/paste is such an ingrained habit I'd much prefer to continue using it as I always have instead of trying to retrain myself. (I'm old, retraining is hard!)
(Selected block)
(pasted block)
Most often I copy and paste directly on the canvas, but occasionally will do it within the layers panel. Both now have the same undesired effect. I also tried creating a new document to see if it was a corruption in my current file, but the issue persisted to the new document as well.
Thanks.

I loaded iTunes on a new laptop. I copied and pasted my albums to a 4G stick and down loaded them to the new laptop. Placing them in, Libraries – Music – iTunes and than in Itunes used File – add file to library. So far so good. For what ever reason one o

I loaded iTunes on a new laptop. I copied and pasted my albums to a 4G stick and down loaded them to the new laptop. Placing them in, Libraries – Music – iTunes and than in Itunes used File – add file to library. So far so good. For what ever reason one of the CDs would not load onto the stick. I got the orginal CD and loaded directly to Itunes. Now when I look in Libraries – Music – iTunes it’s not there but it is in and plays in iTunes. What should I have done or should I be doing? Thanks.

It's not a unique situation - happens all the time, smaller hard drives getting filled up.
It's also easy to fix. I just moved my itunes content to a bigger hard drive.
First I made a backup of the itunes database file - iTunes Library.itl. Just in case anything went wrong.
Nothing did go wrong, but I'd have it in case anything DID go wrong. That file holds ratings, playcounts, Date Added, and other metadata.
Second, in itunes change the preferences > advanced tab to tell itunes to put everything on G:
Set the itunes folder location to something like G:Media or G:iTunes
This will affect all FUTURE additions to itunes and not do anything to the existing locations.
Make sure the checkbox for "Keep itunes organized" is NOT checked. I also left the "Copy files when adding" unchecked.
Third, to move all the files to G: without itunes losing the paths, run the File > Library > Organize > Consolidate command. This will need to run a while, so be patient as it copies all the files to the new G: location. This does NOT delete the originals. You will have to do that.
Fourth, make sure everything in itunes is OK and you can play stuff in your library. If you're really cautious you can run a script to check for missing/dead tracks.

How do I copy and paste multiple keyframes?

I've used previous versions of Final Cut in the past, but primarily have done my editing with Adobe Premiere. One of the companies I am freelancing for only has Final Cut X on their machines. I'm a bit confused about keyframes. Keyframing in the inspector seems severely limited. I could use some help.
Basic example: Say I want to zoom and pan into an image... then have it sit there for 5 seconds... then zoom and pan back to its original location. I can't figure out how to do this at all with Final Cut X.
In Premiere I would accomplish this extremely easily.
#1 I'd set my playhead at the location I'd like START my zoom IN/pans and set all my necessary keyframes.
#2 Then i move my playhead to where I'd like to END my zoom IN/pans, change all my parameters and this sets my necessary keyframes.
#3 I move my playhead further to where I'd like to START my zoom OUT/pans to where it originally was... and set all my necessary keyframes
#4 I move my playhead to where I'd like END my zoom OUT/pans to where it originally was... and simply copy and paste my keyframes from step 1...
The reason why I copy and paste my keyframes from step 1 is because often my parameters are very specific. I'm not necessary zoomed in 100% at the beginning with my position set exactly where it needs to be. Say, for instance, I'm working with an image that is zoomed at 75% and perfectly positioned at some random position somewhere in my frame... without the ability to cut and paste keyframes, I'd have to go back to keyframe 1 and write down all the parameters... then go to keyframe 4 and re-enter them. Massive pain in the butt.
How is this properly accomplished in Final Cut X? I can't even see my keyframes on the timeline... every tutorial I've found just says "set keyframe 1 and keyframe 2 in the inspector" and that's incredibly limiting.

That is kind of a bummer, really. Maybe I'll need to adjust my workflow, but it seems like it's a MASSIVE drawback of Final Cut X.
For example:
Say I have an image on the screen at with Postion X: 97.3px and Position Y: -69.3px with the zoom set to 136.3%... (keyframe 1)
And say I want to move that image across the screen to Postion X: 32.5px and Position Y: -23.5px with a zoom set to 85.3% ... (keyframe 2)
Then say I want to let it stay in that position for 10 seconds ... after 10 seconds I'll set more keyframes by clicking the appropriate keyframe buttons and the settings will once again be set for Postion X: 32.5px and Position Y: -23.5px with a zoom set to 85.3% ... (keyframe 3)
Now say I want it to go back to the original position and zoom.   In premiere I'd just highlight all my keyframes from Keyframe 1 and paste at the new location of the playhead... with Final Cut X, i'll need to go back to Keyframe 1 and literally write down on a piece of paper: 97.3, -69.3, 136.3% ... then go back to Keyframe 4 and type them all out.   This is just a simple example, though.   The more individual parameters I'm setting at specific points... the bigger pain this will be.   Lame.
Even with the link you shared... it appears to be completely amature compared to the keyframe editing capabilities of Premiere Pro. In searching a bit on google to confirm the lack of features, I found someone else complaining:
"You cannot expand any parameter that has more than one attribute (like crop or scale or position) - making it useless.
You cannot add bezier handles to keyframes
You cannot copy and paste keyframes
When you copy and paste attributes, you have no choices as to how they will be pasted, etc... it is dismal.
All in all, it is a step backwards from FCP"
Personally, I'm a bit surprised... the more I learn about Final Cut X, the more I am starting to like it. I know a lot of professionals hated it when it initially came out, but I chaulked it up to unfamiliarity with the new software.   For me, this keyframing thing is by far the biggest drawback I've found to yet.

How do I copy and paste images without a reduction in size?

I am working on a project where I want to include several jpeg images that are saved on my computer onto a new single 8.5x11 page in Photoshop. Even though the percentages are the same on both the images and the Photoshop page, when I copy and paste the images onto the page, the size of the images are greatly reduced (from 5" to 1".) I would greatly appreciate instruction on how to copy images and paste them on to a Photoshop page without the reduction in image size. I have accomplished this task previously and I had no problem. Is there a setting that I am unaware of that I need to change in order to proceed with the project as planned? Thank you for your time.

You are a genius! That's it. Thank you so much for taking the time to help...

How do you copy and paste automation?

Is there a way to copy and paste automation in logic instead of redrawing the same automation later in the song I asked the same question a few weeks ago and some one replied to go to automation preferences and change the setting move automation with regions to always or ask I did this but this simply just moves the automation with the region if you drag it from its original place I want to copy and paste the region and the have the automation with it hope someone knows what I'm on about cheers
p.s does any know if there is a key board command to turn the cycle mode on/off I looked in the key command preferences but could not find it

Hold down the option key, then drag the region. This will copy the regions AND the automation (as long as you have automation preferences set to move the automation with the region).
Also, there is a hidden feature in Logic, that used to be called the automation folder. t was accessible via a key command in Logic 6, and then they removed that key command in version 7. Why they hid this is beyond me, as it is a very useful thing.
But if you go to your key commands and assign a key command to "Automation Event List", this will open an Event List window showing you the songs automation. Now with that List Window open, hit Apple/1. This opens a new Arrange page, but you'll notice that this new arrange page is showing you all the songs automation data, represented as regions.
From this page, you can then cut and move your automation just like you do audio and MIDI regions.

How do I copy and paste pics from one event to another in iPhoto?

I'm trying to copy and paste in iPhoto, but every time I get to the paste part nothing happens. The word "paste" even appears on the screen, but it's grayed out. Any suggestions?

Hi Mel,
From the picture in your post, it seems that you are using SharePoint 2010 workflow platform.
If that is the case, I recommend to use Copy List Item action to copy the current item to other lists instead.
If you still want to use Create List Item action, could you please provide more details about the two steps in your workflow:
I am not sure why you need to set the workflow variable to get the ID in the Checklist2.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Copy and paste temp setting

Similar Messages

Maybe you are looking for