Copy and Share Part of Video Clip

I have captured family VCR clips to digital files (.avi), imported them to Premiere Elements 9, and created DVD movies. I would like to copy a few seconds of a clip(s), and share them as mobile phone video messages and email attachments. I would like to do this as easily as possible, without altering the existing project files. Can I simply copy and paste a small section of the timeline? The help file only talks of splitting clips, which seems to be a meat cleaver approach. Thank you.

Welcome to the forum.
The easiest way to Export/Share parts of a Timeline, is through the use of the WAB (Work Area Bar). Most Export/Share formats support doing so with just the Work Area, but perhaps not 100%. Check that out for the Share>Mobile Devices settings.
Here is a look at the WAB:
Good luck,
Hunt

Similar Messages

Before, when reading PDF files, I was able to copy and paste part of the book. Now it is not possible. I can copy but when pasting gets nothing. Antes, quando lia arquivos PDF, eu conseguia copiar e colar parte do livro. Agora isso não é possível.

Before, when reading PDF files, I was able to copy and paste part of the book. Now it is not possible. I can copy but when pasting gets nothing.
Antes, quando lia arquivos PDF, eu conseguia copiar e colar parte do livro. Agora isso não é possível. Eu consigo copiar, mas quando vou colar o texto, não cola nada.

Caro Fabiano,
Obrigado por ter contactado as Comunidades de Suporte Apple.
Na origem do seu problema podem estar várias causas. Nomeadamente:
O ficheiro (arquivo) que está a ler pode não ser texto, ou seja, pode ser texto transformado em imagem e exportado como PDF.
A aplicação de destino (onde está a tentar colar o texto copiado) pode não aceitar a colagem de texto formatado.
A aplicação que está a utilizar para abrir os ficheiros PDF pode não ser indicada para certo tipo de documentos. Experimente o iBooks, o Dropbox ou até mesmo o seu e-mail.
No caso de nenhuma destas causas estar na origem do seu problema, forneça, por favor, mais informações sobre a origem do ficheiro (descarga pelo Safari, Mail ou outro) bem como o destino (documento Pages, Keynote ou Numbers ou outra aplicação que não o iWork).
Atentamente,
Gonçalo Matos
Estou aqui para ajudar. Clique no botão "Reply" no caso de ter outra questão ou necessitar de outro esclarecimento para que eu possa ajudar da melhor forma que conseguir.

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

Matte and Title extend beyond Video clip???

I have several clips in my timeline with associated mattes and titles in tracks above the video clips. I right-clicked on each the video clip and checked the duration of the clip under the speed window, and then copied-and-pasted this into the speed window for both the title and matte clips to make sure that the title and matte span the same duration as the video clip. The problem is the matte and the title are extending beyond the duration of the video clip.
When I right click on the Matte and Title, the pop-up window indicates that the duration is (00:03:22;20), though when I click on Speed under the pop-up it indicates the duration is 00:03:22:14
Speed is set to 59.27 and frame blending is checked.
Any ideas of what is going on here?

Summary of what I did:
- I used capture now to capture about 30-minutes of video
- I used the razor tool to cut out parts I do not need and to make the
video into a bunch of clips
- I added a black matte that I need to appear at the bottom of each clip
- I added Boris Text that I need to appear at the bottom of each clip
- I place the first matte and text in the timeline and copy it to the start of each clip, the text changes on each clip, so I double-click on the others and change it, the matte stays the same throughout the timeline
The problem:
- the matte and the text clips do not span the duration of each of the video clips and I am unable to physically drag them (extend them) to match the duration of the video
- this is why I took the duration value of the video and tried to input the same value of the duration into the matte and title clips (after right-clicking on them) to force these clips to span the duration of each video clip
- I did not change the value to 59.27 on any of the clips, it did this itself
Am I approaching this completely wrong?
Should I be copying-and-pasting the duration of the each video clip into some other location for each matte and text clip?
Thanks for your assistance!!!!

Pictures lose quality and audio in a video clip starts to clip after render

I enjoy doing various random small projects with final cut studio, but there are a few problems I am still having in doing so. One is I record a local basketball league's games and make highlight videos out of them. Another is I like to convert dvds into files and make favorite quote montages or edit movies to have clean versions for the kids. I do not have professional equipment, yet. Final Cut was the first step I chose to take to upgrade. So I'm sure most of the stuff I use is not the greatest choice, but I'm just trying to get the best out of what I have. And when I have problems that I know are bad, I need to find out how to fix them.
Problem with basketball highlights:
I am not sure which is the best format to convert the video to in Final Cut that would make it work the best. Also a problem importing pictures.
The camera I use to record is a Sony Handycam Exmor HDR-XR100. I am confused about importing in Final Cut so I usually import through imovie, which saves the files as .mov and then I go to the finder and put them in Final Cut. Clicking on more info shows me a 20 minute clip (of basketball in this case) is 14.29gb, quicktime movie, 1440 X 1080 dimensions, apple intermediate codec, integer (little endian), timecode, channel count: 2, total bit rate: 102, 385. When I record with the camera I usually turn off the button 'easy mode', which shows on the screen a better quality image going from HD to HDHQ and 5.1 surround sound. Sometimes the render times are ridiculously long for small files and the quality decreases or what not so I was just wondering if there is a good extension to use or format that would be better for use in final cut. Obviously some extensions don't work in final cut, but the most familiar I've used are .mov and .avi (though I don't use avi anymore because I've been told it's not the greatest idea)
Another recent problem I'm having is with pictures in these highlight videos. When I record basketball, I like to record and show everyone their stats along with the video at the end of each game. So I create an excel document with all the teams and numbers and then save it as a .pdf file or picture to load into final cut and add to the video at the end of each game highlights. A similar thing happens though, when I load it in the browser from there the quality is great in the viewer. As soon as I load it in the timeline, the quality drops drastically and I can't even read the numbers in the viewer or canvas. When I took a final cut training class I remember hearing something about a button that makes final cut work faster by reducing the quality of the media it's displaying, but doesn't affect the output. I was wondering if maybe there is a simple button that I have set wrong and maybe that is the reason this is happening, or maybe I just am making it a bad choice of extension again I don't know.
Problem with video files not recorded by me:
Other times I don't record from my own camera say if I want to make a movie montage of all my favorite movie lines/quotes. I would like to edit movies as well to make them clean for my kids to watch. In any case, I convert the dvd to a file on my computer, usually multiple extensions and just use the one that works and also has the best quality, and then load it to final cut. (Is there a program in Final Cut Studio that would be better for this? Right now I use iSkysoft Media Converter to convert these files). As soon as I load it to the timeline and render it, the audio skips like a hiccup throughout the movie. This is when I notice the skipping is only really audible in the audio when music starts to play. I thought that was kind of weird. I can't pick it up as much when there is just dialogue, but when a song comes on or a scene begins with music it makes the entire audio sound bad.
So maybe the problem isn't what extension the file is and I need to look at more details such as dimensions I'm guessing. If you have any examples I would appreciate it. I am sorry I am so difficult haha.
Thanks again for all you're input and help. What goes around comes around and I really try to do the best I can in everything I undertake. I really appreciate it.

I called it "making a montage of my favorite movie clips." It is what it is. Just how I said it. I do stand up impressions part time and sometimes, believe it or not i get recorded, or I record myself and "make a montage of all my favorite movie clips" or scenes from a movie or anything for that matter. So as illegal as that is I apologize that you want to monitor that stuff.
So lets step out of our assumptive sheriff shoes and stop hazardly guessing at anything that you would disprove of. Everyone else has been very helpful. Besides, all these questions centralize around a basketball highlight video I am making for a coach, that I myself recorded and own the copyright to, to be specific and hopefully clarify your hunch.
As a video editor you also often receive footage with numerous formats depending on who you're working with. Not everything is an illegal transaction that you assume it to be. Thanks

5.0.2 I'm having trouble copying and pasting blocks of 10+ clips so that...

I have 10+ overlapping clips which, when I try to copy and paste to reuse later in the movie don't paste in the same order or even in the same general spot in the movie. Basically, I have to first go searching for the pasted pieces and then try to put them together all over again. It seems like there must be an easier way.
This is for a music video and i'm working ONLY with audio (all video has been deleted), which, as i said is very much overlapping.

Your only choice at this point is to use a machine running 10.3.9 at the latest.
Even the you will need to resort the audio.
W1

Show and Share "Record a video" change bit rate?

In Show and Share's user guide it states that when using the "Record a video" in SnS it defaults to 400bit rate at 320x240. Is there a way to change this?

Hello Tom
1- Yes this is could be from license issue.Can you check the license for your Cisco SNS?.
2- Can you also restart services of Cisco show and share "streaming server" from Cisco DMM as attached.
3-Can you check the pairing is ok.
4-Did you have MXE integration , after uploading the video , what is the status of job "completed or failes".
Note:I got same problem before when i changed my FQDN from name to other but i fixed .
Thanks
please rate all useful infromation

Show and Share Connection to video server failed

I have an SNS server running version 5.2.3. Everything time I try to play a video I get an error stating Connection to video server failed. I am storing videos locally on the SNS server. I can't figure out why I am getting the error.
Thanks,
Jim

Hello Tom
1- Yes this is could be from license issue.Can you check the license for your Cisco SNS?.
2- Can you also restart services of Cisco show and share "streaming server" from Cisco DMM as attached.
3-Can you check the pairing is ok.
4-Did you have MXE integration , after uploading the video , what is the status of job "completed or failes".
Note:I got same problem before when i changed my FQDN from name to other but i fixed .
Thanks
please rate all useful infromation

Copy and paste contents of dashboard clip ?

Is there a way to copy and paste the contents of a dashboard clip, e.g. into an email?

Yes, I mean a selection of a page in a dashboard widget. I find if I click on it, it doesn't open in Safari. I did find that by clicking a word, a line, or a paragraph will highlight, and I can then copy and paste that. You can also use cmd-a to select all, and then the whole page which the selection came from will highlight and then can be c&p'ed. But, since trying to drag to highlight just a few lines results in moving the whole window, you can't c&p precisely, as with an ordinary page.
But I wonder what you do to get it to open in Safari.

Easy way to do smooth motion pan and zoom on a video clip?

Howdy..
As a recent convert from Vegas and Premiere Pro, I'm very happy with FCP6, with 1 issue: Easy moves on video clips.
It's very easy to setup a move with the motion filter, but the problem is that zooming with moving on the clip with 'ease-in' is problematic.
The scaling and motion seem to accelerate at different rates, making it very tough to achieve a smooth pan and zoom at the same time (either one by itself is easy).
I've tried using anchor points, but that's difficult when doing several moves on a clip.
Basically, is there ANY way (either native or via a plug-in) to set up simple pan+zooms on a video clip, with smoothness turned on without having the 'slingshot' effect that you get? I know I can mess around with the acceleration points, but this is tough to do with 100 of clips that need adjusting.
I'd appreciate any help you can offer..
Thanks...
Best,
Ben

Howdy...
Usually I set easy-in/out on the canvas window (for center) and then 'smooth' on the keyframes (for scale) in the motion window.
Can you actually set smoothing for center in the viewer? I think you can only set easy-in/out for center in the canvas. (could be wrong on this one).
I wish it worked like in Motion. Much easier and more intuitive, but one shouldn't have to jump to a different app just to do a simple pan and zoom...
Any other ideas?
-Ben

Render and share part of timeline?

Is it possible to render (share) a small section of the timeline without having to create a new project with only that small piece ?

Use the Range tool to make your selection and share it.
Russ

Share a customized Bridge CS6 or CC workspace with others on my team: Is this possible? Is there a specific file I can copy and share?

I set up a customized Bridge CS6 workspace that shows specific information team members need, and nothing else. I'd like to share it, save it as a preference, or otherwise export it so team members can have it, too. There must be a file, eh?
Otherwise, I am looking at visiting 14 workstations to set it up individually.
Please advise! Thanks!

Which OS? In Windows 7 bridge CS6 workspaces are stored in
C:\Users\user-name\AppData\Roaming\Adobe\Bridge CS6\Workspaces
You might try copying the specific workspace file to the same directory on the other systems.

Mute and unmute audio in video clips

Making an hour long movie. I only want the original movie sound on 2 or 3 clips - the rest my own music. In the past I did it by dragging the movie sound (in Box A) to bottom to mute it then raising it where I wanted it to be heard. However, this would be a royal pain in this case. Is there a way to uncheck the original movie sound where I want my own music, then check it where I want to hear it? I can't seem to do so without making it all heard or none. Can anyone help with a quick way of doing this? Thanks,
Max

Hi Max:
You can extract all of the original audio. It will show up on the second line of the timeline.
Click on one of the extracted audio clips and Edit >'select All". Use the volume slider to mute all of the clips to "0".
If they aren't already, you will need to split the audio where you want to hear it and go back to the volume slider and increase the volume there.
Man, I'm not a very good teacher-hope you understood that one!
Sue

How can i watch and share the whole video?

I only can watch one minute of a five minutes video, Need Help

What kind of video and how did you upload it? Once you upload the video and it transcodes, you should be able to watch the whole video. How fast is your internet?
Pattie

Suddenly have red, green and blue splotches on video clips

It looks like something to do with exposure but I don't know how it appeared, why it appeared, not how to get rid of it. It's driving me crazy, how do I turn it off? It's hard to see but the splotches are a red one on the pan on the right top, and a green one on the woman's armpits and under her collar. There are more but that's an example.

Hi, I had a similar problem with clips that were ok in FC PRO but had colour artefacts in FCP X. Drove me to distraction.
I then discovered that by moving the FCP X window to another monitor (I have 3 monitors) the colour artefacts disappeared.
My main monitor is a 24"' IPS, calibrated FOR PRINT with ColourMonkey hardware and software, and the other 2 are TN monitors.
Anyhow, since my clips appeared ok on the 2 TN monitors i chose a different colour profile for the main (IPS) monitor and, voila...problem solved!
I am certainly no expert in things FCP so i may be wrong, but it could be worth a try?

Copy and Share Part of Video Clip

Similar Messages

Maybe you are looking for