Copy APO Macro ACROSS Landscape..

Hi,
I have a typical scenario, where in I need to write a Macro in APO-DP which is similar to thae one I did in one of the previous APO-DP projects.The Names of the key figures etc are same.. The need for modification would be very little. Subject to my previous customer's clearance, is it possible to port it from the previous landscape to the development server of the New Landscape at New Customer's site? In both places the version is SCM 5.0.
ps: The text version doesn't have the Headers / Symbols and the HTML version of the Maco , which I am able to save, could not be pasted as active version in the workbench of different landscape.
Pl let me know , whether there is any mechanism... Rgds.. TRR

ask you basis guys to set a transport link from system1 to system 2
create a new planning area and under it copy a planning book with the macros
create a transport object for the planning book with the planning area and move it into system 2
once the transport reaches, just "import" the macros from the new planning book to the book you want to
close the link between system1 and 2
I assume your old customer knows you are porting his macros and hence the basis guys will open the connection
Edited by: Harish AN on Jul 25, 2008 1:13 PM

Similar Messages

Use of APO macro function CHAR_VALUES_INPUT

I am using APO V7.
I am using the APO macro function CHAR_VALUES_INPUT to read in a resource name from the interactive user.
Is there a way of making sure that the user entered data is left justified?
(I am using the entered name in the RESOURCE_VARIANT function, and this function only seems to work if the resource name parameter is left justified, ie no leading blanks).
Thanks for any advice on this...

Hi,
see SAP Note 1477144. It corrects this problem.
Best regards
Rico Frenzel

Copying prod/SWCV across systems.

Hi
If there is a parallel XI landscape with one XI 3.0 system(DEV,QA and PRD) and other PI 7.0 system (DEV,QA and PRD) , both running in the same landscape , and there is requirement of transferring/ copying some software components (some interfaces) from the XI to PI system.
Both XI 3.0 and PI 7.0 are having their own separate SLD each.
Can anyone please tell what would be the series of steps that need to be performed on the SLD and XI/PI systems for copying the SWCV.
thanks
Nilesh.

U can export the SWC as zip files from one XI server and simply import it in other SLD of PI system. Aslo see this
XI Software Logistics 1: SLD Preparation
Regards,
Prateek

Why can't I copy a file across a network?

I am having a very peculiar problem copying a simple text file across a network. The problem occurs when I try to copy from a newly purchased and newly upgraded MacBook (13 inch aluminum 08) to a 2010 Mac mini.
When I try to copy from the MacBook to the mini, Document folder to Document folder, I get this message:
A new item named “filename” already exists in this location. Do you want to replace it with the one you’re moving?
If I click Replace, I get this message.
The operation can’t be completed because an item with the name “” already exists.
If I click Keep Both, the process begins to create thousands (yes thousands!) of numbered copy files with the same file name and zero contents.
Copying from the MacBook to a different Mac works normally.
The problem, I suppose, stems from the fact that I migrated my user account from the Mac mini to the MacBook. But, I’ve done that before without a problem, so what is happening?
I also suppose that the solution is to delete the migrated user account on the MacBook and create a new one, but that’s a nuisance.
Can anyone solve this puzzle?
Thanks-
Robin

Sorry I couldn't help. You mention copying a simple text file, then mention ~/Documents to ~/Documents, then finally mention migration assistant.
It's honestly not too clear what you're tyring to accomplish. Do you have mutliple user accounts now and you want to thin them down? Do you simply want to get your Documents from the mini to the new computer? I copy between Macs all the time (ML to Mavericks, Mavericks to Mavericks). The worst thing I've faced is the need to reset home permissions and ACLs.
Many of the guru's who frequent the Mavericks area also come here. I'm sure one of them can help. Good luck.

How to tab across landscape page in textedit?

I want to tab all the way across the page in landscape orientation. But the tabs will only go about 2/3 of the way, then they wrap to the next line.
Is this possible?
Thanks,
Bruce

Thanks for pointing me in the right direction.
Note that you also have to...
1. show ruler (Format > Text > Show ruler)
2. select all of the text on the page (my first attempt only set tabs on the first line)
3. then you can set the tabs
Is there a way to set the position without the mouse? It's a bit hard for me to drag the mouse to an exact hundredth of an inch.
However, it looks like I won't need to do it again. After setting them, I created a new file and my new tabs are already there.
Thanks again. This really helped!

Copy Screen Layouts across users?

Hello All,
Is it possible to copy the screen layouts designed for one user to be copied to another user? We have made lot changes in the way the Purchase module screen looks through Form Settings for one user and we would like to know if the final layout is copied to other users so that the work is not duplicated.
Thanks and regards,
Bharath S

Hi Bharath,
It is possible. you can use SAP B1 2007A SP01 PL12. The functionality is available in the module administration --> setup --> general --> users setup --> copy form settings. you can open one user setup that you want its layout designed by open it user setup form and then click copy form settings. The window copy form settings to users window appears and you can select the user you would like to have the same layout designed.
you can also user query as follows:
CODE SNIPPET REMOVED AS IT CONTAINS UPDATE/INSERT STATEMENTS-
but the query only apply to copy to one user. You must do the copy either using user setup window or query after all users log out from B1.
JimM
Edited by: Paul Finneran on Nov 8, 2010 12:54 PM

Tool to copy/move variables across Planing areas

Hi,
Anyone seen, heard of, or used a tool to copy variables already created in one planning area, to another planning area which obviously shares exactly the same characteristics?
It's plainful and time consuming having to re-create them.
Thanks.

Hi,
Never heard about it but can be created copy the entries from the tables mentioned below and change the planning area and update it back (small ABAP to do it). <b>SAP never recommend writing data back to standard tables</b>. The list mentioned below is comprehensive and should be OK. Actually when you collect a variable in a request SAP passes on these entries to the target system.
UPC_VAR
UPC_VARIABLET
UPC_VAR_ATTR
UPC_VAR_CHA
UPC_VAR_CHADEP
UPC_VAR_CHA_SEL
UPC_VAR_EXIT
UPC_VAR_HIE
UPC_VAR_HIE_SEL
UPC_VAR_NUM_SEL
Hope this was helpfull
thanks

Copying Variant Configuration across sales order items

Hi,
We are working with SAP 4.7.
I have a requirement to default the variant configuration values entered within line 1 of the sales order entry process on to subsequent lines. i.e. defaulting initial values for the configuration.
Our users have to enter many variant line items on a sales order and within an individual order the variant characteristics will be very similar, therefore by defaulting these values to be the same as the previously entered line would be a considerable overhead saving.
However I am having difficulty accessing the variant values which have been entered in the first line item. I have looked at userexit_move_workarea_to_sdwa and userexit_get_field_from_sdcom, however I don't know if I am heading in the right direction. Any advice appreciated.
Thanks for your time.

We are doing this with main-positions and subpositions. The sales clerk enters the main Position with all the characteristics, switches to the tab "Fast data entry" types in the main position, he wants to copy from and the material. There is a dependency which calls a function module which does the real work.
This works with 4.6B in 4.7 there is a psotion type global position which acts similiar.
Ok, now the code:
Dependency
pfunction Z_SD_WERTE_CHARACTERICS
(SD_VBAP_UEPOS         = SD_VBAP_UEPOS,
   STAERKE           = $self.STAERKE,
   BREITE              = $self.BREITE)
/code
CALL FUNCTION 'Z_SD_INHERITANCE'
     EXPORTING
          GLOBALS        = globals
     TABLES
          QUERY          = query
          MATCH          = match
     EXCEPTIONS
          FAIL           = 1
          INTERNAL_ERROR = 2
          OTHERS         = 3
/code
Z_SD_INHERITANCE
DATA: h_uepos LIKE vbap-uepos.
DATA: x_values TYPE ibco2_value_rec OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS:
-values.
    ENDLOOP.
ENDIF.
*-- Ausgabeverarbeitung
LOOP AT match WHERE atcio = 'O'.
*-- Konvertierung ATINN auf ATNAM
    SELECT SINGLE * FROM cabn WHERE atnam = match-varnam.
    CHECK sy-subrc EQ '0'.
    READ TABLE x_values WITH KEY atinn = cabn-atinn.
    IF     sy-subrc IS INITIAL AND
       NOT x_values-atwrt IS INITIAL.
      match-atwrt = x_values-atwrt.
    ELSEIF sy-subrc IS INITIAL AND
       NOT x_values-atflv IS INITIAL.
      match-atflv = x_values-atflv.
    ENDIF.
    match-atfor = cabn-atfor.
    MODIFY match.
ENDLOOP.
ENDFUNCTION.
/code
Kind regards
Matthias Kabel

Using Applescript to Copy a Table Across Sheets

Hi,
I am learning to use Applescript and I am not sure how to do the following:
Copy a cell value from one table in one sheet to another table in another sheet.
I tried the following:
tell sheet “B”
set value of cell 1 of row 1 of table “X” to (value of cell 1 of row 1 of table “X” of sheet “A”)
end tell
But that does not work.

I forgot to write that you must ALWAYS coerce values to strings.
set value of cell 1 of row 1 of table “X” of sheet “B” to (value of cell 1 of row 1 of table “X” of sheet “A”) as text
or
set a_val to value of cell 1 of row 1 of table “X” of sheet “A”
if class of a_val is date then set a_val to a_val - (time to GMT)
set value of cell 1 of row 1 of table “X” of sheet “B” to a_val as text
or
tell sheet "A" to tell table "X"
set a_val to value of cell 1 of row 1
end tell
tell sheet "B" to tell table "X"
if class of a_val is date then set a_val to a_val - (time to GMT)
set value of cell 1 of row 1 to a_val as text
end tell
It's necessary for :
(1) decimal numbers because an Applescript's decimal number use always the period character as decimal separator. Coercing to string replace this standard character by the localized one which is the comma in several countries.
(2) Numbers doesn't know the object date_time of Ap^pleScript. This is why you got the error : "Numbers got an error: AppleEvent handler failed.”
Coercing the date to string (or text which is exactly the same task), you send to Numbers a known structure. As you saw, in the 2nd and 3rd pieces of code, I substract the value (time to GMT) when a value is a date_time one. It's required to take care of the Numbers internal behavior.
Yvan KOENIG (VALLAURIS, France) mercredi 30 mars 2011 20:29:40

Copy a page across workspace

HI All,
Kindly help me to copy a page from one workspace to another workspace.
Thanks
Basva
Edited by: Basva on Mar 1, 2011 2:06 AM

Or edit the exported page before import:
Set the right Application ID in this section (line 75 and following):
begin
   -- SET APPLICATION ID
   wwv_flow.g_flow_id := 1; /* This is the Application ID */
   wwv_flow_api.g_id_offset := 0;
null;
end;And optionally here (line 11 en following, just for your own administration):
--application/set_environment
prompt APPLICATION 1 - MYAPP
-- Application Export:
--   Application:     1And set the security group id to the right one here (line 40): (the number after => is the id)
wwv_flow_api.set_security_group_id(p_security_group_id=>12345678912345);If I want to know de security ID of my workspace, I export a page of this workspace and check the number in this line. Than I save it in a file for futer use.

Calling a function module from APO Macro

Hi,
Can I call a function module from a macro directly without going through the user exit? If so, how should I pass the parameters to the function module? I don't have to get the results back to macro.
Regards

Hi Asokan - you can call a function module directly from a macro providing it is designed to be called from a macro. For example if you are in the Macrobuilder and use the menu path Edit -> Edit User Function then you will get a list of existing function modules that you can call directly by inserting a Operator/function into your macro. If you want to call a function module not listed in the User Function drop down list then you will either need the user exit or create a custom function module as a wrapper and register the wrapper function module in the Edit User Function menu path. Calling a function module will always return a value - but you can choose to ignore that value depending on how you build your macro.
Regards
Andy

APO- Macros

Hi All,
I was trying to use macro function SUM_CALC().
My Req is,
I wants to sum up a auxiliary key figures for 10 periods and check the sum, if my sum is > 0 I will execute a alert.
New step : ( 1 Iterations :22.05.2008;22.05.2008 )
   IF
   Row total is 1
     SUM(
     Row: Row total ( Frm 22.05.2008 )
     = 0
   Add : No data in key figures [ New alert ]
   ENDIF
Guide me if I am doing wrong, and also please suggest any easy method
With regards,
Sreerama

Hi aravind,
I don't think sum_calc() should be used for ur requirement, as
SUM_CALC( key figure ) calculates the sum of all detail levels of the specified key figure.
Also the example logic that you have given nowhere shows usage of the function.
I think using the below logic should work for you.
Step1: 1 iteration Column 1 ; Column 1
IF
Condition for message
SUM(
Area [( Key figure 1 (Column 1); Key figure 1 (Column 2)]
)>0
Information [Message1]
ELSE
Information [Message2]
ENDIF
Hope this helps
Regards
Ankur

Copying content type across site collection

It is a good practice to create a content type and then create a list from it.
Now, say that we create a content type and then create a list from it.
If we want to create similar list in a different site collection, we need to have the content type in that site collection as well.
Could you please let me know how to copying the content type from one site collection to another.
Thanks

Hi,
Thanks for posting your query, Kindly try out the below mentioned script to copying your Content Type from one site to another
Add-PSSnapin Microsoft.SharePoint.PowerShell
$w1 = Get-SPWeb "https://sharepointsite1.com"
$w2 = Get-SPWeb "https://sharepointsite2.com"
foreach ($f1 in $w1.Fields) {
if ($f1.Group -eq "PepsiSiteColumns") {
$f2 = $w2.Fields | Where { $_.Id -eq $f1.Id };
if ($f2 -eq $null) {
Write-Host("Creating field " + $f1.Title + "...");
$f2 = $w2.Fields.AddFieldAsXml($f1.SchemaXml);
$f1.Delete(); # Careful with this one!
} else {
Write-Host("Field " + $f1.Title + " already exists. Not taking any action.");
Also, browse below mentioned URL to fix this issue
http://blog.falchionconsulting.com/index.php/2007/08/copy-content-types/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Copying keyworded PSDs across drives, will all the metadata be transferred?

Hi there
I'm copying keyworded PSD files off an external firewire drive onto a desktop hard drive.
Since I spent a long time keywording and getting the copyright data sorted on them, will this be transferred over as well, or would I have to do it again?
Many thanks!

ok turns out it did, i had to re open bridge
Keywords and metadata are saved in the file itself and when once saved to
that file they should stay present no matter how you copy your files.
Bridge needs to cache files first before showing all the info and previews.
However this should be started automatically after adding files to a folder
you have Bridge pointed to. If not use the purge cache for folder option
(Menu tools/cache/purge cache for folder option). Also the shortcut F5 (menu
View/refresh) might do the trick sometimes when bridge refuses to cache new
files.
If this problem persists you might consider to refresh the preferences for
Bridge (hold down option key while restarting Bridge).

Copy keyword sets across libraries?

Is is possible to copy a set of keywords from one library to another? I recently created a new library and would like to copy all of my keywords from the old library to the new...
Thanks

As a new user, I figured out I can export the keywords to a plain text file that has the keywords that show in the HUD as tab indented text.
Now, I've exported a Keyword file, added new names in a text editor (Smultron) and then re-imported Keywords. Worked great. I then thought I'd take it one step further and sort my existing keywords into a logical order
Originally added in HUD before realizing I wanted them in a different order
People
Family1
Son
Dad
Daughter
Mom
Here's what I want
People
Family1
Dad
Mom
Son
Daughter
Which I was able to change in the text file, but when importing it kept them in the order as entered in the HUD. Drag/drop in the HUD didn't seem to work either. Any suggestions?
Aperture 2

Copy APO Macro ACROSS Landscape..

Similar Messages

Maybe you are looking for