Copy apps using HFM Copy application utility when users logged in.

Hi All
I am using HFM copy application utility to migrate apps across environments. Can we do the same when users are logged in and active? I know that this utility just copies tables from source to destination, but I m not sure if the copy will be successful if some of the tables are being edited.
Thankyou,
Raghu

Hi,
Dont run the HFm Copy appplication utility when apps were in use.Let say you have app1,2,3,4 and you want to move app 1, make sure app 1 is not in use.
if some body is accessing app2 or 3 or 4 you dont want to worry about that while moving app 1.
Thanks,
Mugundhan

Similar Messages

HFM Copy Application Utility

Hi,
My assumption is HFm Copy Application utility is to just copy Data between the applications not the Forms,Grids and Custom Documents.For form and grids we have to just export them and re-import them in the new environment.
Let me know.
Thanks,
Mugundhan

That utility will copy all the stuff from source application. Once you copy the application, Just register the Shared servises and you caould be able to use a replicatied app.

Unable to download application app will be available for download when you log into the itues store on your computer

My Ipad 2 keeps asking:-
"unable to download application 'app' will be available for download when you log into the itunes store on your computer"
If i connect it to the computer it is fine for around a week then it starts asking to be connected again, Is their any reason for this? as it is very annoying espicailly when access to a pc is difficult

There is a 20mb file size limit over 3G.
If you can connect via wifi, there is no file size limit.
If that is not what you mean, I have no idea-never heard of or seen a message like you describe.

Unable to capture trace, when user logs in throuigh Web Interface

The Trace shows 'No Records Found', when user logs in through Web Interface of CRM. But there is Trace found, when the same user logs in through logon pad and carries out normal actvities.
sufficient auth. is provided.
Is there any setting in ST01, through which i can get trace , when user logs in through Web Interface
Regards

ST10 traces 1 instance only.
Your CRM web interface could use another instance than your backend. Go to transaction SM21, choose the appropriate server and run ST10 again.
Succes!
Kind regards,
Lodewijk Borsboom

How to trigger a custom code when user log in?

Hi my friends,
We are using multiple sharepoint sites at work. Users log in with AD accounts, so they dont see any login page.
I need to run a custom code when user login to website. Event receivers do not help at this point. Any suggestions?
thanks in advance

Hi Ahmet,
From your description, my understanding is that you want to trigger some custom code when users log in SharePoint.
As a solution, you could customize a login page for your SharePoint, then you could trigger your code.
You could also use httpmodule to monitor user login. Please refer to this article about how to use httpmodule:
http://sharepoint.stackexchange.com/questions/100976/get-the-current-logged-in-user-in-sharepoint-added-httpmodule
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Issue where the cart is empty when user logs back in

Having issue where the cart is empty when user logs back in
Steps:
1. User logs into the site
2. User selects items and the cart is updated
3. User logs out of their account
4. User exits/closes the browsers
5. User then reopens the browser, navigates to the site, logs in and the cart is empty
My understanding is that the cart should be populated with the previous items since the user did not complete the order.
I have the following settings:
in shoppingcart.properties
persistOrdersForAnonymousUsers=true
persistOrders=true
in cookieManager.properties
sendProfileCookies=true
in /atg/userprofiling/ProfileRequestServlet.properties
verifyBasicAuthentication=true
in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
persistAfterLogout=true
persistentAnonymousProfiles=true
Anything else that needs to be set?
Edited by: boyd4715 on Feb 6, 2013 11:07 AM

I reset the properties back to their orignal state
in shoppingcart.properties
persistOrdersForAnonymousUsers=false
persistOrders=true
in cookieManager.properties
sendProfileCookies=true
in /atg/userprofiling/ProfileRequestServlet.properties
verifyBasicAuthentication=false
in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
persistAfterLogout=false
persistentAnonymousProfiles=false
in /atg/userprofiling/ProfileTools.properties
mergeOrder=false;
Observateion:
If an anonymous user comes to the site, adds items to the cart, leaves the site and comes back - the cart is empty - the order repository is not updated
If a user logs into the site, adds items to the cart and then exits the browser (does not log out), comes back to the site, the selected items are in the cart
If a usr logs into the site, adds items to the cart, logs out of the site, exits the browser, comes back to the site, the selected items are not in the cart
An order does not get presisted to the repository until the order is confirmed.
Based on the last item that explains why the user is not seeing any anything in their cart when they log out. If they do not log out, I assume then that the content of their cart is stored in the cookie.
So, now the question is - why is this happening - I am not the original author of the site - just trying to get some things fixed on it.

HT201272 When i try to reinstall the app for Weather Channel Max on my iphone i get a message saying the app will be available for download when I log into itunes on my computer. I logged in to apple and went to itunes, but I don't see how to get to the

When I try to re-install an app that I have already bought it gives me a message
the app will be available for downloads when you sign in to the itune store on your computer.
I'm on the computer, signed in and I don't see where to get the downloads.

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

[solved] hook to run commands when user logs in? (before bash profile)

Is there any way to run commands when a user logs in but before the bash profile is sourced?
For example, I have a user account with a home directory on /tmp. When the user logs in, the home directory might not exist so there will be no .bash_profile to source. I want to run a script to create the directory if necessary and copy some files into it. How can that be done?
I thought of putting something in /etc/profile or /etc/profile.d/, but I would like to run something before the user's shell and environment become active.
I can use /etc/rc.local to do what I want, but I would prefer a hook to ensure that everything is set right when the user logs in.
Any ideas?
*edit*
Solution
In my case, I found that I could write my own shell script and set it as a login shell. In the script, I can configure everything I need before launching the interactive shell, then clean up anything after it exits.
Last edited by Xyne (2011-12-10 19:34:07)

Thanks, dammannj. PAM could probably do what I need but I think I have found a simpler solution (see original post).

Data in application based on User logged in

Hi,
We have a requirment in our project in which we need to prefill few fields of all pages of application based on the user logged in. The required information to be populated in application is available in database table.
When the page is gettign loaded for the first time the databse has to queried and the forms have to be prefilled. One more requiremtn we have is to restrict the data in ADF Read only tables to that specific user.
Thanks,
Manasa.

Hi,
have a look at SRDemo, which uses a managed bean n session scope for the user specific information. Same could be used to set tables to read only (e.g. checking if user has a specific role granted). So the usecase you mention seems to be easy to achive with JSF on-board functionality
Frank

Java dying when user logs off machine

I have developed a class that monitors a MQ queue, I used the active-x bridge to allow distribution to both java and VB developers to use. The application that is to be developed should be running on a machine in the background.
I created a test VB program using the java class and created a "scheduled task" to start on system start up. When I start the machine, the application starts up and runs. Then a user logs into the machine, and application is still running. Then the user logs off the machine, and the program stops.
I have a VB porgram without the java active-x bridge object and that works throughout the login/logout process.
Any thoughts on how I can keep the program running continously, thanks.

Well, I found a solution. If you add the paramater -Xrs to the java command, it will reduce the use OS signals. Thus it will ignore the hook that Windows has.
It turns out this was a bug in version 1.3. For some non-light reading and more info, see http://developer.java.sun.com/developer/bugParade/bugs/4323062.html

Run LabVIEW executable when user logs off

I have a customer request to do this.
My customer has a computer in their plant that I wrote a LabVIEW applicaiton to monitor part of their process. This computer performs other functions in addition to my program. Their IT department has changed their policy that mandates that anybody using this computer has to log in under their own user name and password. Prevoulsy it was just a group user name and password. What this means for me is everytime a new user needs to use the PC they have to log off and log back on. This stops my program.
Is there a way to have a LabVIEW executable keep running when different users log off and log on?
Thanks
Dan

Sounds like you need a service. It may be a complete architecture change, but you could have an executable running as a service and a user interface executable connecting to it (e.g. via TCP/IP). The service itself can't have a UI.
Without using a service there's no way an application can continue running when a user logs off (afaik).
A service is started even if no user logs on.
There's tools like srvany or similar that allow to run an executable as a service.
Daniel
Message Edited by dan_u on 08-18-2009 03:13 PM

Why does a LaunchDaemon stop when user logs out?

Hi,
We have an application that uses an older version of Jetty that I am trying to configure as a LaunchDaemon on OS X 10.7.5
I've created a org.mortbay.jetty.plist and placed this in the /Library/LaunchDaemons, set permission 644 and owner root:wheel. This can be loaded via launchctl and all is happy. I can connect to the server and browse the pages on the server. However, if I log out, the service stops responding and only starts responding when I log in again. It appears to stop jetty and then restart it when I log in.
As this is being run as the root user, I would not have expected a user logout to stop this process. From what I can see there are no per-user overrides for this.
Upgrading Jetty is not currently an option.
Any help/ideas would be appreciated.
Dave
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>org.mortbay.jetty</string>
        <key>ServiceDescription</key>
        <string>Jetty 5</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>EnvironmentVariables</key>
        <dict>
            <key>JAVA_HOME</key>
            <string>/Library/Java/Home</string>
        </dict>
        <key>WorkingDirectory</key>
        <string>/usr/local/myApp/Jetty/extra/OSX/</string>
        <key>ProgramArguments</key>
        <array>
            <string>/usr/bin/java</string>
            <string>-Djava.io.tmpdir=/tmp</string>
            <string>-Djetty.port=2000</string>
            <string>-Djetty.home=/usr/local/myApp/Jetty/</string>
            <string>-Djetty.logs=/usr/local/myApp/Jetty/logs/</string>
            <string>-d32</string>
            <string>-jar</string>
            <string>../../start.jar</string>
            <string>/usr/local/myApp/Jetty/jetty.xml</string>
        </array>
        <key>UserName</key>
        <string>root</string>
     <key>StandardErrorPath</key>
     <string>/tmp/launchd_myprogram_stderr.log</string>
     <key>StandardOutPath</key>
     <string>/tmp/launchd_myprogram_stdout.log</string>
      </dict>
</plist>

Thought I had an answer...but no.
Maybe this reference will help: Daemons and Services
Message was edited by: g_wolfman

How can I use firefox between windows 7 & windows XP on a network, where we are using Samba server. If a user logs on different workstation(and OS) with same account.

we have a Linux fileserver with Samba share and have several users.
The users tend to be in different locations and need to login at different workstations, sometimes the workstation may be WindowsXP and othertimes it is windows7.
How can we use Firefox & Thunderbird in this situation.
I find that Windows7 uses compressed files to store the location information.
when a user logs on to win7 it creates a new account.

we have a Linux fileserver with Samba share and have several users.
The users tend to be in different locations and need to login at different workstations, sometimes the workstation may be WindowsXP and othertimes it is windows7.
How can we use Firefox & Thunderbird in this situation.
I find that Windows7 uses compressed files to store the location information.
when a user logs on to win7 it creates a new account.

Launchd - can it run a script when users log in OR switch?

I'm hoping to find someone who knows all the gory details of launchd. Here's the why and what: I'm trying to coerce Aperture into letting two users on the same computer share the same Aperture Library, both able to import photos and see and use what the other has done. Initially it is no problem, change the permissions so everyone has read/write/execute, put the Library in a common area, and point both person's Aperture at it. The problem is that Aperture changes permissions of things inside the Library as you use it, and especially when one person imports, the other person can't see that stuff.
So I want to run a script whenever someone logs in or becomes the active user by fast user switching; the script will simply change ownership and permissions of the library and everything in it to restore full access.
After days of research and testing, I made a test launchd plist file (this is the configuration file or agent that launchd looks at and runs your script when criteria are met). It sits in /Library/LaunchAgents/, here it is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.jim.test</string>
<key>LimitLoadToSessionType</key>
<string>LoginWindow</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Scripts/testscript.sh</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Users/jim/Desktop/test.err</string>
<key>StandardOutPath</key>
<string>/Users/jim/Desktop/test.out</string>
</dict>
</plist>
The actual test script is sitting in /Library/Scripts/:
#!/bin/bash
echo "org.jim.test.plist was run at `date`"
So if the plist is loaded and the script run, the date and time are written in the test.out file on my desktop. This thing runs great when a user logs in. The problem is, it doesn't run when users switch by fast user switching. In reading the documentation, it was vague about this, whether that could be done; I thought it could.
Can anyone help with a way to get the script to run when any user takes control by any means? As an added complication, which I'll worry about later, the script has to run as root because it's the only way to get the ownership and permissions changed.
Thanks,
Jim

BobHarris is the MAN. ACLs seem to have worked. I put the Aperture Library in /Users/Shared/ApertureLibrary, restored the regular permissions as best I could (me as owner, staff as group, 755), pointed each person's Aperture to the library, then proceeded with the ACL magic. First I created a group for my wife and I, called 'aperture', in the Accounts preference pane. That was to simplify the ACLs (one entry instead of 2) and so that other users (son) aren't able to muck it up.
It took one stinking Terminal command (note that 'aperture' at the beginning of the quote is the group, not the program, folder or library):
chmod -R +a "aperture allow list,addfile,search,delete,add_subdirectory,delete_child,file_inherit,directoryinherit" ApertureLibrary.aplibrary
I was unsure whether this list of permissions was necessary or sufficient, but it seems to have worked so far. Both users can access the library. I imported a different picture by each user, and the other user could then see and delete the picture imported by the other. This was not possible before.
Bob, thanks for the great idea. After a little more testing I'll post a complete how-to in the latest "how do we share Aperture" thread, and give you due credit. The bad news is all the launchd fun is over
Jim

Monitoring when users Log to resources remotely

I'm trying to monitor when users access another computer in the domain remotely. I check out the logs from the Domain Controller on event viewer (WindowsLogs) and it shows me some events where I can see that a user logged on a sepecific machine.
But when I run a test my logging in to a remote server I do not see an entry tha shows anything related to an access to the remote server.
Is there anything I need to enable on the domain controller or any other logs I can take a look at?

Hi,
Have you configured audit policies on the Domain Controller?
You can use ADUC to enable auditing, more information for you:
HOW TO: Audit Active Directory Objects in Windows Server 2003
http://support.microsoft.com/kb/814595
Configuring Audit Policies
http://technet.microsoft.com/en-us/library/dd277403.aspx
Best Regards,
Amy Wang

Copy apps using HFM Copy application utility when users logged in.

Similar Messages

Maybe you are looking for