Copy attachment in mail

Hi all,
An interesting little problem. I have a mail --> ECC proxy scenario. My mail has 3 attachments; 1 is swapped (PayloadSwapBean) and mapped to the proxy where it creates an invoice. The other two attachments are carried in the message header and linked ( in the proxy) to the invoice via the content server. It works fine.
Now, I would also like to add the third attachment (the one I swap) as another attachment to the invoice. So I still need to swap the attachment to create the invoice, but I also need to keep it to create and link the content server entry.
My guess is that I will need a new adapter module - something like a PayloadCopyBean. I've steered clear of creating modules so far.
Any other ideas ??
Thanks,
Guy

Hello, guy,
I would like to discuss invoice creation and adapter module in more detail privately. Seem to be having similar problem. Please e-mail me at [email protected]
Thanks and regards,
R.J. Mackie

Similar Messages

Why can't I right click and copy a email attachment in mail 7.0

I am tryign to jsut copy jpgs from email attachments without having to save them and when i right click in the new mail there is no longer a copy option.
Is there anyway to jsut copy straight from mail without saving the file.

Only because Apple didn't make that possible - although you can probably Command click it to open in a new tab.
Apple - Safari - Feedback

Is it possible to send xls attach in mail in background ?

is it possible to send xls attach in mail in background ?
i build/copy program to send attach file in xls format ,
its work fine in foreground but do nothing in background ,
What can be the reason?
the section of the sending :
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_DATA
      PUT_IN_OUTBOX              = 'X'
      SENDER_ADDRESS             = LD_SENDER_ADDRESS
      SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
      COMMIT_WORK                = 'X'
    IMPORTING
      SENT_TO_ALL                = W_SENT_ALL
    TABLES
      PACKING_LIST               = T_PACKING_LIST
      CONTENTS_BIN               = T_ATTACHMENT
      CONTENTS_TXT               = IT_MESSAGE
      RECEIVERS                  = T_RECEIVERS
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.

Try this example, not sure where I got this, but it works.
report zmail_excel.
parameters: p_email   type somlreci1-receiver
                               default '[email protected]'.
data: begin of it001 occurs 0,
      bukrs type t001-bukrs,
      butxt type t001-butxt,
      end of it001.
data:   imessage type standard table of solisti1 with header line,
        iattach type standard table of solisti1 with header line,
        ipacking_list like sopcklsti1 occurs 0 with header line,
        ireceivers like somlreci1 occurs 0 with header line,
        iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
*   Populate table with detaisl to be entered into .xls file
perform build_xls_data .
* Populate message body text
clear imessage.   refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
* Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
                                      iattach
                                using p_email
                                      'Example Excel Attachment'
                                      'XLS'
                                      'TestFileName'
                                      'CompanyCodes'.
*      Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
             con_tab type x value '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.
concatenate 'BUKRS' 'BUTXT'
         into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001.
    concatenate it001-bukrs it001-butxt
           into iattach separated by con_tab.
    concatenate con_cret iattach into iattach.
    append iattach.
endloop.
endform.
*      Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription.
data: xdocdata like sodocchgi1,
        xcnt type i.
* Fill the document data.
xdocdata-doc_size = 1.
* Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle .
* Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
     ( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name   = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
* Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
* Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num   = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type   = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name   = p_filename.
ipacking_list-doc_size   = ipacking_list-body_num * 255.
append ipacking_list.
* Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = xdocdata
            put_in_outbox              = 'X'
            commit_work                = 'X'
       tables
            packing_list               = ipacking_list
            contents_bin               = iattachment
            contents_txt               = imessage
            receivers                  = ireceivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
endform.
Regards,
Rich Heilman

How to make a safe copy of all mails or to export these?

Hello, I'n newbie on Mac OS X. I've been wondering how to make a safe copy of all mails in my inbox or to export all of them, like on Outlook with the function "Export". I don't find such function under MAIL. Can you please help me? Thanks
Best regards.

Hi
Welcome to Mac Computing.
The folder holding your e-mail plus mailboxes etc. is located (via the Finder) in your User Account>Library>Mail folder. You can copy this folder to external media, such as another hard drive, or CD/DVD.
If you want to save specific e-mails, follow these directions from Mail's Help section (Help Menu):
Exporting email messages:
You can save one or more messages as a separate file to archive messages or to import the contents into another application. You can open the saved message in TextEdit.
Open the message you want to export.
Choose File > Save As, and enter a name for the file.
Choose a location for the file from the Where pop-up menu.
Choose a format from the pop-up menu.
If you choose Rich Text Format, the text formatting of the message will be visible.
If you choose Plain Text, the colors, fonts, and other formatting will be lost.
If you choose Raw Message Source, the full delivery headers will be visible. If the message has attachments, you'll only see the encoded version of the attached files.
A Good way to familiarize yourself with OS X is to pick up a copy of Scott Kelby's book OS X Tiger: Killer Tips.
Post back

Send Attachment via mail

Hi All,
My requirement is to send the contents of an internal table as an attachment via mail to an external mail address.
I am working in SAP version 3.1H.
Would anybody provide a sample code of how to do so?
regards,
Paul

Hi,
If you require small example you can also have look on the
following sample code which will post internal table data as attachment. Please not email address has to be customised in the <b>SAP usermaintaince.</b>
FORM send_mail.
it_doc_chng-obj_name = text-016.
it_doc_chng-obj_descr = text-016.
DESCRIBE TABLE it_objtxt LINES g_lines.
READ TABLE it_objtxt INDEX g_lines.
it_objpack-doc_size = ( g_lines - 1 ) * 255 + STRLEN( it_objtxt ).
it_objpack-doc_type   = 'RAW'.
APPEND it_objpack.
it_objpack-head_start = 1.
it_objpack-head_num   = 0.
it_objpack-body_start = 1.
it_objpack-transf_bin = 'X'.
it_objpack-body_num   = g_lines.
it_objpack-doc_type   = 'RAW'.
it_objpack-obj_name   = 'ATTACHMENT'.
it_objpack-obj_descr = g_file.
APPEND it_objpack.
completing the recipient list
SORT it_vmail.
DELETE ADJACENT DUPLICATES FROM it_vmail.
IF l_client NE 'P'.
    it_reclist-receiver = p_email.
    it_reclist-express = 'X'.
    it_reclist-rec_type = 'U'.
    APPEND it_reclist.
ELSE.
    LOOP AT it_vmail.
      it_reclist-receiver = it_vmail-smtp_addr.
      it_reclist-express = 'X'.
      it_reclist-rec_type = 'U'.
      APPEND it_reclist.
    ENDLOOP.
ENDIF.
it_rec_mail[] = it_reclist[].
IF NOT p_copy IS INITIAL.
    it_reclist-receiver = p_copy.
    it_reclist-express = 'X'.
    it_reclist-copy = 'X'.
    it_reclist-rec_type = 'U'.
    APPEND it_reclist.
ENDIF.
CLEAR it_download[].
it_download[] = it_objtxt[].
**********Sending the mail with attachment*****************
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_MAPI'
    EXPORTING
      document_data              = it_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack
      contents_bin               = it_objtxt
      contents_txt               = it_objtxt
      receivers                  = it_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
CASE sy-subrc.
    WHEN 0.
      IF p_update = 'X'.
        PERFORM reference_update.
      ENDIF.
     PERFORM down_load.
      WRITE:/01 text-019.
      SKIP.
      LOOP AT it_rec_mail.
        FORMAT COLOR 5 INTENSIFIED OFF.
        WRITE:/01 text-010,20 it_rec_mail-receiver.
      ENDLOOP.
      ULINE.
    WHEN 1.
      WRITE: / text-012.
    WHEN 2.
      WRITE: / text-013.
    WHEN 4.
      WRITE: / text-014.
    WHEN OTHERS.
      WRITE: / text-015.
ENDCASE.
REFRESH:it_objpack,
          it_objtxt,
          it_reclist,
          it_rec_mail.
CLEAR:it_objpack,
        it_objtxt,
        it_reclist,
        g_lines,
        it_rec_mail.
ENDFORM.                    " send_mail
Regards
Suresh Babu Karanam

Copying /Library/Server/Mail between servers?

Howdy All,
I have upgraded a Snow Leopard Server to Mavericks Server including the Mail service. Let's call this MSU. I have a freshly installed and configured Maverics Server with Mail service not running (it was started once). Let's call th is MSN (n for new).
Can I copy the /Library/Server/Mail directory and contents from MSU to MSN (after removing the Mail directory that's there)? I am trying to do this on the command line now "sudo cp -rfp ...".
But the copy is saying that a number of sockets ini ./Mail/Data/spool cannot be copied. I understand what sockets are (I think) and undersand why they can't be copied.
However, my question is will this cause a problem? Will these sockets be automatically regenerated when the Mail service is restarted?
Again I've removed the Mail directory on MSN (really just zipped it and moved it to another location) and the Mail service is off. I am copying over the Mail directory from MSU, which is not currently running (i.e. the machine is booted from MSN not MSU).
The users and groups on both machines are different but the primary ones, the ones I care about going forward, are the same (hopefully).
Any thoughts or suggestions would be appreciated.
Cheers,
Ashley.

Many thanks for your reply UpTimeJeff.
UptimeJeff wrote:
Don't use the Finder.
I am using the command line. Both drives are attached to the same machine so I just used "sudo cp -rfp ..."
the mailstore copies easily from 10.6 to 10.9
Ok, thanks for that.
As I mentioned, I upgraded the old Snow Leopard Server, which I thought may have made some changes to the Mail service, so I could just copy the Mail service to the fresh install of Mavericks Server.
Strange thing is my cp seems to have got stuck. No cpu activity for cp process but the shell indicates the command is still running. It's been over 12 hours and we didn't have that much mail.
Cheers,
Ashley.

Getting message typed twice when including attachment in Mail 6.2 (1499)

getting message typed twice when including attachment in Mail 6.2 (1499)
anyone else having this issue?

Can you explain further what you mean "getting message typed twice"?
Does each letter double ("ccaatt"), each word double ("cat cat"), each sentence double ("The cat left. The cat left"), or the entire message text double ("Dear John The cat left. Sincerely, Mary Dear John The cat left. Sincerely Mary")?
Does the doubling appear while you are typing, only after you attach a file, in the "Sent" mailbox copy after sending, or only on the receiving end?

Syncronization: How can i store mail for different accounts remotely, and copy most important mails manually to local folders on two devices?

Hello. I have two devices and two accounts, so what i want is this:
I only want to store mail from both accounts in a remote place and copy most important mails to local folders.
(I will be grateful for any ideas as to where/how this "cloud" can be - specially free places)
* Can I have a copy of these local folders in both devices and the remote storage?
* Could i synchronize devices so that: when i move a mail to a local folder in any device, its copied to the same folders in
the other device and the remote storage place?
* The remote storage place will have many other folders. When I open Thunderbird, I also want to see these and the mail
inside, and also be able to move mail from the inbox to these folders.
* One of the accounts is gmail. In Account Setting tool, there is an option for synchronization. If there is no easier way, I can have mail for other account copied to gmail, and just syncronize gmail mail. For this, how will I copy my present folder structure to gmail. And how can I syncronize the local folders on the two devices?
Thanks in advance.

The first awkwardness I see is that there's no obvious format in which to store messages remotely such that you can work with them in an email client. It may be possible to set the "Local Directory" option in the account in Thunderbird to point at some remote folder (DropBox comes to mind) but I have never tried this and I'd be nervous about what happens if connection can't be made, or if you happened to access it from two different places simultaneously. The other concern is that mail stores get big, quickly, and you'd be forever uploading and downloading large (multi gigabyte) files. Thunderbird stores what looks like a folder containing many separate messages as one big file, so there's no simple opportunity for incremental changes to be up/down loaded.
The whole idea of Local Folders in Thunderbird is to detach messages from servers, so they don't track what happens on servers. I say this to point out the distinction between files stored locally and permanently ("Local Folders"), versus cached copies of online files ("synchronized"). It's not safe to regard your synchronized folders as permanent.
So, synchronized folders on an IMAP server are "mirrored" in Thunderbird so you do have a local (albeit temporary and transient) copy of messages; this is done mainly to avoid repeatedly downloading messages if you re-read them, and it makes searching faster an more efficient. But these "synchronized" message track what's being done on the server, and so if they are deleted anywhere, all synchronized devices will at some point also see the deleted messages vanishing. (Unless you made a local copy in the Local Folders account.)
I use a gmail account pretty much as you have described; I copy or move messages to that account so they are visible in my phone, my tablet, my own laptop and my works computer. It's free, and it's "in the cloud"; the only reservation I have is its privacy. There are other providers (e.g. 1&1/gmx) who don't seem to have the data collection fetish that google thrives on.
It's fairly simple to create filters in Thunderbird to automatically copy messages to your "cloud account"; even better is to set up forwarding rules on the other accounts' servers, so your messages are automatically sent on and waiting for you when you next login, already in the cloud account.

Fetch data from table and generate attachment than mail it.

Hello Experts,
From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
My Scenario is:
I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
select a.location_code,
               a.item_code,
               b.description item_desc,
               to_char(a.manufact_date,'ddMonyy')mfg,
               to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
               to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
               round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
               a.closing_balance_posted quantity
          from wms_stock_current_balance_v a, wms_item_setup_mast b
         where a.closing_balance > 0
           and a.item_code = b.item_code
           and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
           and nvl(b.qurantine_period,0) > 0
           and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
      order by a.item_code, a.location_code;
Sample data of above query is
LOCATION_CODE
ITEM_CODE
ITEM_DESC
MFG
Expiry
Quarantine
Days Elapse
Quantity
13DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
14DL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
134
14DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
14DR2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
20
14LL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17ER2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17GL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17SL0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
64
18QL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
19AR5
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
160
19DL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
19JR0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
60
19TL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
20GR2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
40
36FL3
000000000000000F0487
CLEAR COOL BLACK 05ML
18-Feb-10
29-Mar-14
2-Jun-13
-124
65
19UR0
000000000000000F0591
COMFORT WHITE 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
1
12SL1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
12SR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
14OR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
8
36EL4
000000000000000F0594
CLEAR HF DECRASE 5M*360
14-Feb-10
14-Feb-11
12-Oct-10
-1088
14
13VL1
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
160
14ER0
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
105
Database Info
Oracle 10g
Version 10.2.0.1.0

Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
Re: How to execute a proc and spool files in a database job
And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP.

Smart Forms - Attaching HTML file as an attachment in Mail

Hai,
I have following requirements. I have to send the Payment Advice document output as a HTML format to the vendors.
I am able to get the smartforms output as html file. The output of smartforms i am capturing
   call function '/1BCDWB/SF00000170'
      exporting
        control_parameters = w_control_parameters
        output_options     = w_output_options
        user_settings      = 'X'
        w_t001             = w_t001
        w_reguh            = w_reguh
        w_regud            = w_regud
        w_e1idrs1          = w_e1idrs1
      importing
        job_output_info    = w_job_output_info
      tables
        t_item             = t_item
      exceptions
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        others             = 5.
    w_xmloutput = w_job_output_info-xmloutput.
*-SAP Smart Forms: Result of XSF Transformation
    w_htmldata = w_xmloutput-trfresult-content[].
Currently the w_htmldata informations are stored in the form of RAW 1024 characters.
Using the below mentioned FM the attachment information i am passing through
       contents_txt               = it_message
parameters. The contents_txt support only 255 characters. But the smartforms returns RAW 1024 characters. When the HTML attachment is not showning the content properly and the data displays is misaligned. Kindly give me the suggestion how to overcome this issue !
call function 'SO_DOCUMENT_SEND_API1'
      exporting
        document_data              = w_doc_data
        put_in_outbox              = 'X'
        sender_address             = ''
        sender_address_type        = ''
        commit_work                = 'X'
      importing
        sent_to_all                = w_sent_all
      tables
        packing_list               = t_packing_list
        contents_bin               = t_attachment
        contents_txt               = it_message
        receivers                  = t_receivers
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.

Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

How do I send a large (23mb ) PDF file as an attachment in mail?

How do I send a PDF mail attachment in mail that is greater than the crazy limit of 23MB? Thanks for your help!

Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

Problem in Sending .txt as an attachment to mail

Dear Experts,
I am working on a file to mail scenario. I have searched a lot in sdn, but could not locate the exact answer for the same.
I am using file adapter to pick up a txt file from a location and supposed to send this as an attachment to mail(in box).
My scenario is ready, have configured the IR and ID. there are only 5 fields at the sender side, have done one to one mapping at the receiver side.
question is
1) Do I have to use content conversion at the sender side in order to read the file in XI or....
2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
Kindly provide your valuable suggestions or idea to proceed , as i am confused how to proceed wz the same.
Thanks
Virendra

Hi,
1) Do I have to use content conversion at the sender side in order to read the file in XI or....
Since ur source is a .txt file... to convert it to a xml format u need to use the FCC in file adapter.
2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
You can send the payload of a message as a attachment.
I hope u dont want to send the XML structure as a attachment... In receiver...first u have to convert the XML to a .txt file and then
u need to send this .txt as a attachment..
If this is ur requirement u can do it by using the inbuilt EJB's and a Mail adapter in receiver.
The inbuilt bean is MessageTransformationBean... which can convert a XML structure a Text file.
and then u have to pass it to Mail adapter... Please keep in mind the sequence of processing.
If clarification needed u can put a post again
3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
U need to configure both sender and receiver. Sender is a file adapter and receiver is a Mail adapter.
Decide first u want to use mail package or not..
For ur scenario u can do both ways using Payload or XIALL..
Babu

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items

File attachement in mail adapter

Hi ,
I need to send users an error report which I have captured in the form of a file. Is it possible to attach this file as an attachement via mail adapter. I have been reading that the payload can be sent as attachment by specifying the interface namespace and interface name. But my requirement is to trigger the mail once the file has been completely written and not for every message. The reason being I could have 3000 records in the file and I dont want to send 3000 MAILS out but just 1 mail for the entire 3000 records...
Thanks,
Teresa

Hi Teresa,
I hope, I understand you right.
When you use the file-adapter for sending the file, you can without mapping send this file out to a mail receiver as attachment, there is nothing special to do.
Regards
Stefan

Need to sent alv output as html or as pdf attachment in mail

+Hello
I want to send an ALV output as attachement in html or as pdf format. how to do that? line size is greater than 600(nearly 40 fields).
+please help me in this query.
Regards
Guruvayurappan
Moderator Message: Please search before posting your question. Thread locked.
Edited by: Suhas Saha on Dec 29, 2011 4:57 PM

Hi,
For sending the ALV output as PDF attachment, you can create a spool (proper page size in print parameters) and convert the spool to PDF using the FM CONVERT_ABAPSPOOLJOB_2_PDF and then send the same as attachment in mail.
For send the data as HTML attachment, try the below FMs
WWW_ITAB_TO_HTML_HEADERS & WWW_ITAB_TO_HTML_LAYOUT to create the HTML layout
WWW_ITAB_TO_HTML to create the HTML for the actual data.
Hope this helps you.
Regards,
Sachinkumar Mehta

Copy attachment in mail

Similar Messages

Maybe you are looking for