Copy Billing plan from Contract to Sales Order

Dear Expert,
             We created the Contract with Billing plan related to specific "WBS "Element". Then, tried to create the sales order with reference to that Contract. But billing plan details maintained in contract is not getting copied to sales order. can anybody give your experience to solve this issue.
Warm Regards,
Nag

Hello Nag,
Did you check your copy control routines in transaction VTAA? You need to see if these fields are included in the routines maintained for copy control between your contract and sales order.
I hope this helps.
Best regards,
Ian Kehoe

Similar Messages

  • Copy Billing plan from Quation to Sales order at header level

    Dear Gurus,
    I am using custom routine (600) to copy Billing plan from Quotation to Sales Order.
    I used following code to copy Billing plan.
    LOOP AT CFPLT.
    MOVE-CORRESPONDING cfplt TO FPLT.
    CLEAR FPLT-FPLNR.
    FPLT-FPLNR = FPLA-FPLNR.
    MOVE-CORRESPONDING FPLT TO XFPLT.
    XFPLT-UPDKZ = 'I'.
    APPEND XFPLT.
    CLEAR XFPLT.
    ENDLOOP.
    UPD_FPLT = 'I'.
    I also tried with CFPLA instead of CFPLT.
    Using this code all line item Billing plan is coping into header Sales order Billing Plan (Duplicating records). When I save and come back it is giving Express Document error.
    I could not able to save document.
    Please guide me this regards.
    Thanks,
    Vasanth.

    Hello Nag,
    Did you check your copy control routines in transaction VTAA? You need to see if these fields are included in the routines maintained for copy control between your contract and sales order.
    I hope this helps.
    Best regards,
    Ian Kehoe

  • Copy BILLING PLANS from Quotation to Sales Order.

    Hi Guys,
    I am trying to copy the billing plans from quotation to sales order(SO), when CREATED BY REFERENCE from quotation.
    Quotation HEADER LEVEL Billing plans -> SO Header Level Billing plans
    Quotation ITEM LEVEL Billing plans -> SO ITEM LEVEL Billing plans
    I have already tried to use copy control routine 402 by adding a statments to copy internal table CPFLT to XFPLT. It did not work.
    I will appreciate if somebody can tell how to accomplish this task. It is for ECC 6.00
    Thanks,

    Hi Manoj,
    I know its very late to provide the solution. Thought of sharing since I had a similar requirement as yours and got the solution.
    Here is the Solution::::
    1) Let 402 routine stay in the config and do not add any custom code in it.
    2) In TCode: VTAA , in FPLA tab, copy the routine 251 (Conditions) and copy the below mentioned code..thats it...
    FORM DATEN_KOPIEREN_251.
    *{   INSERT         ECDK900223                                        1
    LOOP AT CFPLT.
    MOVE-CORRESPONDING cfplt TO FPLT.
    CLEAR FPLT-FPLNR.
    FPLT-FPLNR = FPLA-FPLNR.
    MOVE-CORRESPONDING FPLT TO XFPLT.
    XFPLT-UPDKZ = 'I'.
    APPEND XFPLT.
    CLEAR XFPLT.
    ENDLOOP.
    UPD_FPLT = 'I'.
    *}   INSERT
    ENDFORM.
    Now you should be able to copy the Billing plan from Quotation into Sales Order.
    Reward if helpful
    Thanks,
    Maqsood.

  • Copy PO Number from contract to sales order

    Hi,
    My clients requirement is that when i create sales order with reference to contract the PO Number should be copied from contract to sales order other wise we have to enter PO Number every time while creating the sales order.
    Please guide me.

    Hi
    Small change in the program will copy the PO number from Contract to sales order.In case need take help of ABAPer
    Data which is not copied
      LOCAL: VBKD-FKDAT.
      LOCAL: VBKD-FPLNR.
      LOCAL: VBKD-WKWAE.
      LOCAL: VBKD-WKKUR.
      LOCAL: VBKD-DELCO.
      LOCAL: VBKD-BSTKD.
      LOCAL: VBKD-ABSSC.
      LOCAL: VBKD-BSTDK.
    In your data declaration, you have
    LOCAL: VBKD-BSTDK
    Please comment out this line and your purchase order should be copied over. You might also have to comment out some of the other fields which are declared locally if you wish to copy them as well.
    Ramesh

  • Billing Plan from Quotation to Sales Order

    Hello Friends,
    When Iam creating a Sales Order with reference to a Quotation, I want to copy the Billing Plan automatically from Quotation to Sales Order.
    How can I achieve this??
    Thx,
    Smitha.

    Hi Smitha,
    During sales order processing, the system determines from the item category whether a
    billing plan is required and, if so, which type of plan
    The type of billing plan that is determined at this point is set up in Customizing and
    cannot be changed in the sales document
    REWARD IF U FINDS THIS AS USEFUL...
    Regds
    MM

  • Copy over currency from contract to sales order directly

    Hi!
    I would like to have the currency mentioned in the contract to copy over to the sales order when a sales order is created with reference to the contract. Currently thats not happening . Is theer a way by which i can use the copy control to get the currency copy over form the contract to the sales order directly when a SO is created with refernec to the contract.?
    Thanks

    Could anyone please give suggestions as to how have the header currency copied over from the contract to sales order when created with refernec to the contract?
    Thanks

  • Copy Characteristics Values from Contract to Sales Order

    Hi Experts,
    I have created a contract with multiple configurable assemblies in Super BOM of Header Material. Requirement is to create a sales order by referencing that Contract. But system is not copying Characteristics Values. I have to enter all those characteristics manually again in Sales Order, which is increasing workload and more prone to error.
    Configuration Profile of Header Material: Sales Order BOM (SET) -  Multi Level
    Configuration Profile of Configurable Assembly: Sales Order BOM (SET) -  Multi Level
    Tried with below options:
    1. Copy Item Number, Complete reference
    2. Same Item category, copy schedule lines, under Configuration field = A.
    Please suggest a solution.
    Thanks,
    Vishal

    Hi Shiva,
    Thanks for your input.
    But I have checked with all combinations, but not working.
    Thanks & Regards,
    Vishal

  • Condition Type is not copying from contract to sales order

    Dear All,
    The value the i am giving in the sales contract is not copying into sales order. Sytem again asking to enter the value.Is there any setting to be done forthat.
    Regards,
    Suresh Yadav.

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Item number to be regenerated when copying from contract to sales order

    Hi,
    I am copying items from contract to sales order, say there are 10 items in contract. I copy all items leaving 5th & 7th item in contract. The numbers in sales order has to be in sequence (regenerated leaving the 5th & 7th line item) rather than it is copying the line item number as in the contract. Can any one kindly suggest me how to handle this in sales order.
    Thanks
    Ghanesh

    Hi,
    In VTAA
    QT to OR at header level
    REMOVE TICKMARK OF COPY ITEM NUMBER
    Then system will genrate new item numbers in targer document.
    Kapil

  • VKGRP should copy from contract to sales Order

    Hi Guru's
    I have a problem related with copy control from contract ot sales order. sales group should copy from contract to sales Order while Sales order reffers to customer Master. In contract sales group comes from Customer Master, after saving the contract if i change the sales Group and create sales order with reference to contract. sales group doesn't get updated from the contract. system refers customer master only.
    Any suggestions
    thanks,

    Hi,
    I see that you can address this in following ways.
    1. copy control between Sales order - Contract - header level routine.  Here you may be able to influence the copy of the customer group details.
    2. You can use the user exit which will trigger during Contract creation ( Move field to VBAK) or you can think of using save_prepare user exit.
    Thanks & Regards,
    CLN

  • Copy sales office from contract to sales order

    HI,
    How can i copy sales office from contract to sales order.is there any requirement in the standard process?
    Regards,
    Ramky

    Dear Ramky,
    I think, the requirement will get full-filled with Standard Settings, itself:
    Check with Copy-Control Settings (in T. Code: VTAA) b/w Sales Order--Contract.
    For the Combination (Contract-to-Sales Order), select "Item" from Left-hand Dialog-Structure, and afterwards, select "Item-Category".
    Now, on to next screen, maintain as following:
    Copying requirements 303
    DataT 151 General item data
    DataT 102 Bus.data/item compl.
    Best Regards,
    Amit

  • Net weight of the material is not copying from contract to sales order

    net weight of the material is not copying from contract to sales order?
    plz help me

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Modification in copy control from Contract to Sales order

    Hello Gurus...
    We are using a standard copy control routine to copy header and item level data from Contract to Sales order.
    Now what happening is the price for some items is changing after creation of contract. But when the sales order is created it is copying old value from contract.
    I want to modify the routine in such a way that I can redetermine the price for the item.
    I can not change configuration as the same is used by multiple company codes and the change is required only for some company code.
    Any suggestions please?

    Hi there,
    You have do some customizing in the pricing type at the copy controls in item level.
    Define a copy control routine at the item level in VOFM. In the routine put a condition that the system should read the value in the pricing type. As per your requirement if the company code / sales org is 1000 / XXXX for eg, then the system should apply the pricing type that will carry out the new pricing at the order (I am not connected to SAP right now so not sure what that pricing type is). If the company code / sales org is apart from 1000 / XXXX, it should default the pricing type that is there in standard copy control VTAA.
    Check if that is possible with your ABAPer. What I feel is that you have to hard code the pricing type value (that will carry new pricing) in the new copy control routine.
    Regards,
    Sivanand

  • Creation of Multiple billing documents from a Single sales order

    Hi Experts,
    How can we create many billing documents from a Single sales order.
    Will it be possible we create a Sales order with bigger quantity and then keep on creating partial billing documents based on the billing quantities and dates.
    Request you all for a solution.
    Thanks
    Montee

    Hi ,
    1. If Qty is one number - based on value of the order - it is possible to create different billing doc.'s based on billing date and value using billing plan , again these are periodic billing or milestone billing
    2. Using Contract process- create material /qty contract- release partial qty  by creating release document and create billing document w.r.t to contract or release document (sales order)
    thanks
    Chidambaram

  • User Exit/Badi to change the billing plan date when create sale order

    Experts,
    Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
    My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
    I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

    Hi,
      check the include MV45AFZB.
    Thanks & Regards,
    Sateesh.

Maybe you are looking for

  • Error in creating standby db... need HELP !!!

    Hi, i want to set up a standby db for current production db and i did the following: 1) shutdown the production db; 2) cp $ORACLE_HOME/oradata/testdb/*.dbf(on production) to the the standby db server; 3) startup the production db; 4) create a standby

  • My iphoto on desktop wont open?

    How do I get iphoto to open?

  • How to preventing files from downloading when I open them

    Hi there, Is there a setting somewhere on my computer that will allow me to open files (in emails, on webpages, etc.) without first having to download them? Please help....

  • Having Problem in select statement.

    Dear gurus im having an issue in select statement. i have written a select statement which is fetching the result as i required but it takes to much time to execute. how to make it work fast. SELECT vbak~vkbur vbap~vbeln vbap~posnr vbak~audat        

  • REmote Monitor and Keyboard

    Current Set up: Room 1     Mac Mini connected to TV with wireless keyboard and trackpad, Belkin router Room 2     Airport Express used to stream music to Bose speakers via wifi. Question: Can I place a second monitor, keyboard, mouse in Room 2 to con