Copy client 000 to 001

I am trying to copy client 000 to 001 in preview abap without success.
Can someone help me if it is possible?
How can I activate HELP in preview abap?
Mat

Hi Mat,
before you post you should always try the search. I've found by searching for "client copy sneak"
Client copy on SAPNetWeaver04SneakPreviewABAP.
Regards
Gregor

Similar Messages

Copy client 000 to 001 in preview abap

I am trying to copy client 000 to 001 in preview abap without success.
Can someone help me if it is possible?
How can I activate HELP in preview abap?
Mat

Hi Mat,
I've given you an anwer already in the copy client 000 to 001. It is a bad habbit to crosspost.
Regards
Gregor

Logical Systems for client 000 and 001

I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
Do I need to create logical systems for clients 000 and 001?
Do I need to creat rfc's for these?
Thanks,
Daniel

no, no need.
you will create a logical system name for the copied client (such as 100)

What's the differece between BI client 000 and 001 ?

Hello exports,
We copy the client 000 to client 100, then we done the configuration "Integration into Portal " at client 100.
But we can't success, we found that client 100 miss 7 system users( J2EE_ADMIN,SAPJSF,SLDDSUSER and so on). After we created 7 system users manually, the configuration "Integration into Portal" was sucessful .
As default, Portal connect to client 001 .
Is there any other differences bewteen BI client 000 and 001 except 7 system users ?
Thank you !
Best Regards,
Chen Jianguo

Clients are part of the defining technical structure of the SAP System. Each client contains its own master records and set of tables.
Customizing is either client-specific or cross-client, depending on which business data is configured. Cross-client Customizing is valid for all clients in an SAP System.
When you install the SAP System, the following clients are available:
Client 000 as SAP reference client
Client 001 as production preparation client
More info here:
http://help.sap.com/saphelp_nw04/helpdata/en/7e/c8189452c511d182c50000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6c/a74a3735a37273e10000009b38f839/frameset.htm
Hope it Helps
Chetan
@CP..

Difference between client 000 and 001.

Hi,
what is the difference between vclient 000 and 001 ?
Best regards

000: SAP standard client
This client is used to set up new "neutral" clients by client copy. Do not change or delete this client.
This is an SAP referce client
Every time an SAP system is installed the 000 client is created by default woth 2 users SAP* and DDIC. Transport configurations are always done from 000 client. (they can t be done in any other client and they have to be done with the user DDIC).
Other client like Customizing client, testing client etc are created form the 000 client. Similarly in the production environment also the productive environment client is copied from 000.
001: SAP standard client
This client is used to set up new "neutral " clients by client copy.
This is also an SAP reference client. No changes should be done in this client either
Do not change or delete client 000 or client 001.
Regards,
Prashant

Use of clients 000 and 001 & their differences?

hi guys,
Any one explan me the use of predefined clients 000 and 001
The differences between them

Hi,
Clients 000, 001 and 066 are standard clients that are pre-delivered by SAP. These clients are not supposed to be used in development, quality and production environments.
Client 000 is basically used as working client only when you do support pack upgrade or ABAP load generations (SGEN) and implementing additional languages, etc. Otherwise, client 000 should not be used as a working client. The same applies to client 001. But the only exception with 001 is, with Solution Manager, 001 will be your working client. You will do all configurations and obtain support from SAP through this client. With other Systems like BW and CRM, this client (001) will not be a working client. Two standard users (SAP* and DDIC) are defined in the clients 000 and 001.The client 066 is used only for EarlyWatch functions (Monitoring and performance). The user EarlyWatch is delivered in client 066 and is protected using the password SUPPORT. This password needs to be changed for security purposes.
Rgds,
Suman

Client Copy - Which source client 000 or 001?

I have a new SAP Netweaver 2004s SR1 ABAP+JAVA system with the following usage types:
SRM App
SRMLac
AS Java
AS ABAP
DI
MI
All the post-installation steps have been completed (including the CTC template configurations for DI and MI). The Java, DI, and MI have been configured against client 001. Now I want to create a new production client. The J2EE_ADMIN and users associated with DI and MI exist in client 001.
I want to create a new production client 010. Should I copy the users (SAP_USER) from client 001 and the customizing data (SAP_CUST) from client 000? Or, can I copy everything from client 001? There is a lot of conflicting information in the SAP Notes in regard to which source client to use.

You should not use a transport of copies for table USR02. Use client copy profile SAP_USER or SAP_UONL (without authorization profiles and roles).
And you should never copy customizing from client 001 to build up a new client. 001 happens to be a ordinary customer client which does not get supplied with changes SAP delivers after the release date. New SAP Netweaver 2004s installations use client 001 to file the user masters needed for the JAVA part. But this does not change the fact that client 001 is a customer client and should not be used as a template.
For local client copies you could use copy profile SAP_UCUS with source client 000 and source client user master 001 in one step. This has the same result as a client copy with SAP_CUST from 000 and SAP_UONL from 001 (i.e. thet authorization profiles and roles come from 000, when you need them from 001 you can either copy the missing individually or use SAP_ PROF in a separate step).

Client 000 & 001 ?

Hello all,
I would like to know
1) What is the diff between clients 000 and 001?
and what is use of 001?
2) What is Transport domain and Domain controller?
pls explain me
points must be rewarde
regards
Gajendra

Hello Gajendra
Just to finish off your questions...
What is Transport domain and Domain controller?
A transport domain is a group SAP Systems that are managed jointly by the same Transport Management System. So you have your test environment, QAS and productive as part of a Transport Domain.
Certain system settings are the same for all systems within a Transport Domain, such as the transport routes. To achieve this, one SAP System in the transport domain has the reference configuration, with all other SAP Systems in the transport domain taking copies of this reference configuration. The system with the reference configuration is known as the Domain Controller; only in this system can you make changes to the reference configuration. Each time you change the reference configuration, you must distribute the new configuration to all systems. The TMS automatically generates RFC connections between the systems in a domain so that they can communicate.
Hope this helps
Regards
Ken

Monitoring client 000 instead of active client

Issue: Ideally, we would like to monitor the active client but are not given SAP_ALL / SAP_NEW. Hence we end up monitoring client 000 where we get full auth. But does this gives all the info reqd for monitoring and administration?
1. With Solution Manager as the monitoring system, is it ok if we monitor client 000 of the target systems instead of the active client?
We intend to perform BASIS tasks (Perodic tasks such as servers (SM51), processes (SM50), database (DBxx), O/S (ST06), Dumps (ST22), bkg jobs (SM37) and so on)
2. Is there any documentation that shows the difference between monitoring client 000 and the active client.
Please note, we intend to configure BPM in the future, and hence we understand that the active client needs to be monitored.
3. In case we intend to monitor the active client, where can we get the list of auths (roles/profiles) reqd to perform the the above BASIS tasks
It would be great if we could get info on other ways to address this issue.
Thanks in advance

Hi.
I will try to shed some light on your questions.
1 For monitoring purposes client 000 is well suited. There are only a handful of activities that must be performed in the specific client. Example, create background job, start client copy, (look at transactional data). Reading background job logs is client independent (consider to put in the client in the name when you operate mulitple clients).
2 I cannot recall any official document stating difference. There are some information on help.sap.com defining the usage of client 000 and 001.
3 This is as hard to answer as it is to say how long a rope is. It really depends on what activities that is going to take place in the active client. simplest way is to list transactions/tasks that basis needs to perform and create the correct authorization from.
/fredrik

About IDES- CLIENT 000

Hi to all,
while working on IDES "Client 000" i am not able to make any customization chages , when i tried to do it system prompts me that user is only display user and data is locked.
As in other client there is no CIN , and i want to do configuration of CIN.
Is there any way i can do this in client 000??
Is it possible to copy client 000 to some other client and do the config.??
Or any other solution to this.
Regards, Kapil

Hi,
For changing the authorization in your personal computer, you should use Tcode: PFCG. There are a few links that you can check.
You create a new role for yourself and give full authorization. Then, assign it to your own user id.... then it should work. Check the below links for details.
http://publib.boulder.ibm.com/tividd/td/ITWS/SC32-1278-00/en_US/HTML/TWSAPPEX115.htm
http://wiki.sdn.sap.com/wiki/display/profile/2007/10/12/PFCG-ROLE+MAINTENANCE
Hope this helps
Thanks
Mukund S

When are DDIC and SAP* used in Client 066 and 001

Hi everyone,
Can someone please shed some light on when DDIC and SAP* users are supposed to be used in logging into client 066 and 001?
Your inputs will be greatly appreciated.
Thanks!
Divine Grace Banzon

User DDIC is a user with special privileges in installation, software logistics, and the ABAP Dictionary. The user master record is created in clients 000 and 001 when you install your R/3 System.
User SAP* is default superuser in SAP System, in the clients 000 and 001. A user master record is defined for SAP* when the system is installed. However, SAP* is programmed in the system and does not require a user master record.
Hope this will help.
-Pinkle

Which client should be use 000 or 001 for Client Copy

Hi,
Which client we can use 000 or 001 for fresh Client Copy.
Also what is the diff. b/w 000 and 001 client and its uses...
Please suggest.

Hi
Always use client 000, except for solution manager systems.
Best regards
550894 - CC-ADMIN: Setting up a new client
Always use client 000 as a template, and never client 001. (A known exception is the SAP Solution Manager.)
Do not copy any application data from client 000 because the consistency of data and the number ranges cannot be guaranteed.
Only client 000 is populated with upgrades, Legal Change Packages, Support Packages, language imports and so on with new Customizing so that it always contains the current sample Customizing. This is why it is also so important that the copy is only carried out after the system is updated. Client 001, on the other hand, is obsolete. It serves only as a sample client and may be deleted at any time.

Copying Client 001 instead of 000

Hi Experts,
Just a query, we've installed srm 7.0 ehp1 and after finishing the post processing i've noticed that we've copied client 001 to the new client (sandbox client - 251) instead of 000. is there any drawback or consequence of doing that? the thing is we have already configured SRM-ECC integration (SRM 251 and ECC 251).
Is there any harm? because reviewing the client 001 - it is copy of master client 000.. but based on the document -
5.16Performing the Client Copy
SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
Client 000 is the SAP reference client for ABAP.
Use client 000 as source client for the client copy.
please help me analyze and explain if there will be a drawback about copying client 001 instead of client 000. should i delete the existing client251 and create a new client251 copied from client 000 and repeat the SRM - ECC integration?
Thank you.
Regards,
Tony
Edited by: Tony on Aug 8, 2011 1:13 PM

>
Razia Cassim wrote:
> Hi, thanks for your input, I created all the required users and made the change in the
>
> When i try to access the portal I can get into the potal but when I goto
>
> http://ttaf-sap-bwp.ttaf.co.za:8000/ijr/portal ->
>
> SYSTEM ADMINISTRATION -> SYSTEM CONFIGURATION -> UME CONFIGURATION ->
>
> I get the following error message : You are not authorized to use the UME config editor
>
Does your user have the required authorizations? Is it part of the SAP_J2EE_ADMIN group? Is the user assigned to a role that contains UME.Manage_All?
>
Razia Cassim wrote:
Then when I try to goto
>
> http://ttaf-sap-bwp.ttaf.co.za:8000/index.html -> SAP NETWEAVER ADMINISTRATOR
>
> i get the following error message : SYSTEM LANDSCAPE DIRECTORY IS NOT ACCESSIBLE
> SELECT SYSTEMS BEFORE PROCEEDING
>
> Please advise how I can overcome this problem
>
> You assistance is most highly appreciated,
>
> Razia
As far as the SLD goes, I am no expert. I suggest you take a look at the SLD documentaion:
http://help.sap.com/saphelp_nw70/helpdata/EN/31/f0ff69551e4f259fdad799a229363e/frameset.htm
-Michael
Edited by: Michael Shea on Mar 5, 2008 3:40 PM
fixed quote tags

Local client copy of 000 after installation fails

I'm trying to install XI. I installed Web AS 6.40 (from the SR1 installation) ABAP stack. Before installing the Java Add-In I need to make a copy of client 000. I login using client 000 and SAP*, goto SCCL and without even getting to the transaction I get the following error message:
"Target client is prodductive and protected against client copy."
(It's message no. TA133) -- I got into SCC4 (like help suggested) and the only users I have are 000 and 066 ("Test EarlyWatch Profiles"). 000 is set to "SAP Reference", not "Productive".
The thing is I never even get to enter the target client; I never get to enter anything in the transaction, it throws me out immediatly.
I managed to get a step further by following these steps:
1. Using SCC4 I created a copy 000 (001)
2. Logged out from 000
3. Logged in using 001 and SAP*/PASS
4. Went to SCC4, deleted the 001 entry and saved (if I don't delete it I get the same error as before)
Then when I went to SCCL (while still logged in with the deleted 001 client) I got the transaction. It put 001 as the target (which is fine by me), I selected a copy profile but and selected 000 as the source -- but when I tried to execute I got the same problem as before.
(I'm sure it's apparent that the whole ABAP world is new to me this is just me trying to install an XI test system in the office.)
What am I missing here?
Thanks,
Alon.

hi alon,
what do you mean with 1) (copy 000 to 001)?
just create a new client in SCC4, make sure that the parameter "client role" isn't set to "productive".
log on as sap*/pass in the new client and use SCCL to make a copy.
kr, achim

Client 000, 001 and 066

Hi everyone,
Pretty new to SAP.
I am struggling to find answers to the following questions:
How do you use client 000, 001 and 066?
Apart from initial installation and support (066) can theses clients be used in development, testing and production environements?
Can 000 and 001 be used as working clients or should they only be used as template?
What should their configurations be when using SCC4 for each system inthe landscape: DEV, QA and PROD (and Solution Manager)
From a security point of view, once SAP*, DDIC have been secured should they be any other users (Dialog, System) in these clients?
Sorry quite a few questions but if anyone could give me direction as I am trying to understand if some of our current settings are correct and if not why.
Thank you

Hi Corinne,
Even though it is a very basic question, it is very essential to understand and find an answer to your questions.
Client 000, 001 and 066 are (as you know) standard clients thats pre-built when you install SAP.
"Apart from initial installation and support (066) can theses clients be used in development, testing and production environements?"
Answer: No, they cannot be used for development, testing or production environments. When I say, "they cannot", I mean they are not supposed to be used.
"Can 000 and 001 be used as working clients or should they only be used as template?"
Answer: Client 000 is basically used as working client only when you do support pack upgrade or ABAP load generations (SGEN) and implementing additional languages, etc. Otherwise, client 000 should not be used as a working client. The same applies to client 001. But the only exception with 001 is, with Solution Manager, 001 will be your working client. You will do all configurations and obtain support from SAP through this client. With other Systems like BW and CRM, this client (001) will not be a working client.
"What should their configurations be when using SCC4 for each system inthe landscape: DEV, QA and PROD (and Solution Manager)"
Answer: In the production system - "Changes and Transports for Client-Specific Objects" should be set to "No Changes allowed". "Cross Client Object Changes" should be set to "Changes to Repository and Cross-Client Customizing Allowed". "Protection: Client copier and comparison Tool" must be set to "Protection Level 1: No Overwriting". Same applies to Quality System and Development System. These are by-the-by default settings also when you install the system.
"From a security point of view, once SAP*, DDIC have been secured should they be any other users (Dialog, System) in these clients?"
Answer: Once you install the system, you must first make a copy of DDIC to any user you create in your name or any standard name. Never use DDIC when you do initial settings after the installation.
The following link might be of some help to you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/c8189452c511d182c50000e829fbfe/frameset.htm
Hope this helps.
Thank you.

Copy client 000 to 001

Similar Messages

Maybe you are looking for