Copy command has disappeared

Hi! I was wondering if someone could help me for this has never happened to me before and really puzzling.
My paste command has disappeared. It's gray and the shortcut doesn't work either. Does anyone have any suggestions for why this has happened? Thanks so much.
Desperately,
BT

Hi Rachimal,
The clipboard shows what I've copied but still can't paste: from Word to pdf, or even within Word itself.
Thanks for any help,
Blackthorne

Similar Messages

While importing and burning some CDs, my entire library has disappeared. Also, there no longer is a "burn file to disc" command in the File menu. I have downloaded the latest version of itunes which restored only tracks I bought from the iTunes store.

Also, the "burn playlist to disc" command has disappeared from the File options. I downloaded the latest version of iTunes but that only restored tracks I'd bought from the iTunes store. I also tried setting up another logon.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music li

The error message I get on my PC is "The ITunes library file cannot be saved" An unknown error occurred (-50)and my music library has disappeared. I recently tried to copy a CD to my library - it appeared to copy ok but then did not appear in my music library. The library does not show up even when my iPad is connected to my PC. My entire library is now held on my iPad and I wish to have it in iTunes so I can sync my iPhone to it as well. Help?

Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

On Word I was copying a sentence, but the command has not been executed and the timer is constantly circling. It has been circling for over 10 minues. How do I get out of this?

On Word I was copying a sentence, but the command has not executed and the timing cursor has been circling for over 10 minutes. How do I get out of this?

You probably will need to force-quit Word. Go to the Apple menu, choose "Force Quit", locate and select Word in the list of applications and click the "Force Quit" button. You will of course most likely lose any changes you made to the document since you last saved it (or it was auto-saved, if you have that option turned on in Word).
Regards.

My command bar has disappeared, I only have a search bar. My bar with bookmarks, internet options, tools etc has vanised as well. Ron

My command bar has disappeared as well as my bookmarks, tools, internet options, etc. My only option is to use the google search bar.
Ron

* If, on Windows, in Firefox 3.6 the menu bar is hidden then press and hold the Alt key down or press F10, that should make the "Menu Bar" appear
* Go to "View > Toolbars" and check-mark "Menu Bar" with a click on it to make that permanent. See [[Menu bar is missing]]).
* Make sure that you have the "Navigation Toolbar" and the "Bookmarks Toolbar" visible: "View > Toolbars"
* If items are missing then see if you can find them in the "View > Toolbars > Customize" window
* If you see the item in the Customize window then drag it back from the Customize window to one of the toolbars.
* If, in "View > Toolbars > Customize", you do not see that item then click the "Restore Default Set" button
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

Need help! Command bar has disappeared!

Post Author: rkanger
CA Forum: Desktop Intelligence Reporting
Hello, I am currently using Business Objects 5.1.3 to build reports using Excel as a data source. Recently, I had an error message and it shut down. When I started it back up, I noticed the Command Bar has disappeared: (top of page) FILE EDIT VIEW TOOLS DATA WINDOW HELP
I can't seem to get it back? When I right click in that area, I get "restore, close, minimize" options?
I have looked everywhere to find out if there is a keyboard shortcut that will make my command bar reappear. I do see the tool bar but no command bar.
Please help! Thank you!
cheers,
Richard K.

Post Author: Hyder
CA Forum: Desktop Intelligence Reporting
Go to windows registry and delete the following link (its for 6.x version). Find similar link for version 5.x in your PC
HKEY_CURRENT_USER\Software\Business Objects\Suite 6.0\default\BusinessObjects\Application Preferences\BusinessReporter
Login to BO, the toolbar should be visible.
Hyder

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Desktop screen keeps flashing black and dock has disappeared. iMAC X Yosemite 10.10.1

Recently I updated my iMac to OS X Yosemite 10.10.1. All was operating smoothly for a few weeks until one day i started up and logged in my dock was nowhere to be seen. The desktop screen started flashing black replacing my desktop image. None of my desktop icons disappear when this happens. screen keeps flashing black every few seconds. Also the dock has disappeared.
I have restarted in safe boot and it makes no changes.
iMAC X Yosemite 10.10.1
Please help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I am using Mavericks. I had a list of VIPS and used it extensively. Now it has disappeared and VIPs on the menu bar is faded. There is nil response to VIP in help. Can you tell me what has happened?

I am using Mavericks. In Mail I had a list of VIPS and used it extensively. Now it has disappeared and VIPs on the menu bar is faded. There is nil response to VIP in help. Can you tell me what has happened?

Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/VIPSenders.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Icloud has disappeared from my MacBook Pro

iCloud has disappeared from my MacBook Pro. I suspect I may have inadvertently deleted it. It is definitely not anywhere to be found within the Preferences section. How can I download it please when it is not on my Mac anywhere and when I go into the Apple store their instructions assume it is sitting on my computer. I do have an iphone and am about to purchase an iPad. Is there any iCloud go across to the Mac Book Pro if I sync the two items. Thank you for your help. Cheers
Pauline

How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes
Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.)
Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1.          In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b.          or click the “Find” icon in the Pacifist window and type the name of the software you need.
3.          In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4.          On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
5.          Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
          20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6.          Click “close”. Go to step 7.
Extract or Install........
7.          In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8.          If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9.          In the next dialog, click “Extract”.
10.          If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11.          Type in your password, click “OK”
Pacifist will begin to extract files.
12.          In steps 8/10ß.... you also have the choice to “cancel”
Notes:          Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
Stop
Leave original alone
Update .....
Default selection
Replace .... (Replace option should only be used on full install packages)

After updating to system 7.2 the library folder in my home folder has disappeared.. anyone know if this is a byproduct of OS7.2

After updating to system 7.2 on my MacAir, the library folder in my home folder has disappeared.. anyone know if this is a byproduct of OS7.2

Not with 10.7.2 but with OSX Lion since it was released.
Apple has hidden the Library folder by default.
In Finder option-click Go in the menubar and it will appear under Home.
Or permanently with this Terminal command: chflags nohidden ~/Library
Stefan

I have been creating a film on Final Cut Express and half of my film has disappeared- what can I do to retrieve it back!?

I have been creating a film on Final Cut Express and half of my film has disappeared! What can I do to retrieve it?! Furthermore, command Z doesn't appear to be working! Any help would be much appreciated!

Check the capture/scratch disc to make sure the media is still there. If it isn't your hard drive may be going bad. If it is, then you may have inadvertently cut part of the video from the Timeline or deleted it from the Browser.
As for the Command z issue, see how many levels of undo you have set in FCE preferences. Also keep in mind that Command z will not work if you close the project and reopen it.
-DH

My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP.

My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP. I never did anything to make this happen.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.

Copy Command in Pl/Sql block

Can I use Copy command in Pl/Sql.For example :-
Declare
cursor c1 is select table_name from all_tables
where owner = 'LSP' and rownum = 1;
v1 varchar2(2000);
Begin
for c2 in c1 loop
v1:='copy from lsp/lsp123479@dvlaq to scott/[email protected] create '|| c2.table_name ||' using select * from '||c2.table_name;
execute immediate v1;
end loop;
end;
Its not running properly giving an error as invalid Sql statement .
Is it bcoz Copy command cannot be used in a Pl/Sql Block.

Is there any other way to move the Table & data to another Data Base .Database link is the obvious one. And the SQL statement would look something like this (on the target database):
SQL> create table FOO nologging as select * from FOO@sourcedb;
However, the first question I always ask if why? What one may think is the solution to a problem is not always the best solution. So one need to identify the problem first, and then see what solutions there are and which one is the best fit.
Other options are replication (using materialised views for example), Data Pump (available with 10G) - even could be Data Guard, a standby database, or a Real Application Cluster... depending on just what the problem and actual requirements are.
Also important to note that SQL*Plus has its own set of commands. Do not confuse these commands (like EXEC, COPY, CONNECT, HOST etc) with the SQL and PL/SQL Languages. Not only are they executed by different software products, SQL*Plus commands are executed on the client and SQL (and PL/SQL) runs inside the Oracle database instance.

Everything in my iTunes has disappeared, how do I get it back?

Basically, I went into my iTunes to discover that everything (Music, TV Shows, Films etc.) has disappeared. I have regretingly not back up my files, therefore I am asking if anyone knows how to get my files back?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Copy command has disappeared

Similar Messages

Maybe you are looking for