Copy Control for Sales Order

If you want to copy one particular pricing type (say "H") to a limited number of sales order (say 10). How would you do it without letting it take effect on all the other sales orders ?
Let me rephrase the question.
In the copy control settings, there is a pricing type that you can define for Sales Document to Sales Document at the Item Category Level.
Originally it would be at "A".
So now you want to change the pricing type for 10 sales orders previously created without affecting any other. How would you do that?
Thanks

Hi Noel,
You can control through copy control settings for the future documents not for the already created document.
And you also mentioned that the specific pricing type only for ten orders that you can do it manually,you put the pricing type what you want in the copy control settings then create 10 sales orders then change that pricing type to standard one then it will continue the stanadrd process
I hope it will help you
Rwegards,
Murali.

Similar Messages

  • Copy Control between Sales Orders and Deliveries

    Hi Gurus,
    please can you tell me why copy control between Sales Order and Delivery doesn't work?
    At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
    At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
    Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
    When delivery is created with VL10A transaction, at header level only the first  general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
    Then it is used the requirement routine at item level (FV50B***).
    Please can you tel me how we camake working the routine for grouping requirement at header level?
    Thank you very much.
    Kind Regards
    Andrea

    Hi, we used standard routine even if to be sure we run also the generation report you mentioned.
    Please any other suggestions?
    Thank you very much.
    Kind Regards
    Andrea

  • Copy function for sales order

    I want to create a sales return, and use copy with reference to do that. But if the sales order items cate is TAB, then those items cannot be copied, I check the config dosen't find the TAB item for order type, even in the standard, RE to OR, I question that whehter is not make sense to copy TAB items. Anyone try add TAB item to copy function? Thanks!

    Use T-Code - VTAF (IMG - Sales and Distribution - Sales - Maintain Copy Control for Sales Documents - Copying Control: Billing Document to Sales Document
    Here select your Invoice Type & Sales Returns Documents type & double click in Item on left hand side. You will list of available items & you can also add new Items here.
    Hope this helps...
    Thanks,
    Jignesh Mehta

  • Copy Control From Sales Order to Purchase Order

    Hi Experts,
    I want to ask how the copy control from Sales Order to Purchase Document can be done? Because they are instances that the users have some items in the Sales Orders not copied to Purchase Document.
    Thanks a lot!

    Hi Experts,
    I have seen the documentation for 3rd Party Sales, thanks to some suggestions. However, there is a report which does not work in our Test Environment, the program name is SDMFSTRP. As suggested by some forums, this is another way of connecting Sales Order to the created Purchase Requisition. So I'd like to ask if there are other ways to connect the 3rd Party Sales to the created Purchase Requisition.
    And also may I know your scenarios when there will be missing items from Sales Order to Purchase Requisition. There are some instances that from Indent Orders, some SO items are not copied to PR.
    Thanks a lot!

  • Copy control for sale office in delivery

    Hi,
    In our delivery note the field sale office is blank... we need that this field will be filled by copy control or user exit from document sale (order sale)... always the deliveries are for the same sales office.
    Any clues for achiving this?
    Best Regards
    Juan

    Hi
    As mentioned in the above answer, please follow the following steps.
    1. Got VOFM - > Data Transfer -> Deliveries.
    2. Copy Routine 1 to 601.
    3. Go in the code of routine 601 and add the following line.
    MOVE CVBAK-VKBUR TO LIKP-VKBUR.
    4. Activate the routine.
    5. Go to copy control for deliveries Tcode - VTLA.
    6. Select the necessary combination of order type and delivery type.
    7. change the assignment of routine for header data to 601 and save.
    you shud be abe to achieve the desired result.
    Regards
    Yatin

  • Copy control from Sales order to Credit memo-VTAA

    Hi
    We have a below requirement..
    While copying from sales order to Credit memo order type,defualt payment terms in credit memo order type should be always change to NT00(payable immdtly due date)
    So we had written a routine under sales order copying .VOFM-901
    In VTAA we have set 901 instead of 101 under Copying requirements for transferring business data-under change header view..
    But while creating sales order type CR with reference to normal sales order,it is not copying the NT00 payment term..
    Can u tell us whether any other settings required in VTAA.
    Note:We had copied existing 101  to 901 with addition logic -
    IF VBAK-AUART = 'CR'.
       VBKD-ZTERM = 'NT00'.
    ENDIF.
    Regards
    Sudha

    Hi Sudha,
    The coding added in 101 is not enough to achieve your requirement, because of the fact that the VBKD-ZTERM will be filled again with the original value from CVBKD in the copy routine on the item level. (For example 102 for OR to OR in standard system)
    Could you please create another routine 902(adding the addition coding to 102) and replace it on copy control for item level?
    It should work then.
    Regards,
    Smile

  • Outbound message control for sales order SISCSO.

    Hi...
    I am trying to generate IDoc for Sales order using message control. The IDoc of type SISCSO is getting generated as per the requirement.
    I want to calculate certain things before generating IDocs. I have done the following configurations:
    1. A function module 'ZIDOC_OUTPUT_SALES_ORD' is created with interface same as 'IDOC_OUTPUT_ORDRSP'. (Where i am planning to write a code)
    2. WE57 where Function module is assigned to SISCSO as outbound FM.
    No BD51 is done as it is only for inbound process.
    3. New process code ZSO is created through WE41, which is made message independent and FM created in step 1 is assigned to it.
    4. In WE20 , this process code is attached to V1 type of application under message control.
    Still, my FM is not getting called... I have checked it by applying Break point as well as raising exception in the FM. But still it's not working..
    Where am i going wrong??
    Can anybody suggest solution??
    Thanks,
    Audy.

    Hi,
    You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
    check this link:
    Re: Master_IDoc_Distribute
    and use transaction : WEDI for IDOC configurations.
    here you will have all the transactions(step by step) to set the outbound IDOC configurations.
    Regards
    Appana

  • Copy controls for service orders

    Hello Experts,
    How can i do copy control from service order to another order? as I don't want to copy the components from the reference order.
    Best Regards,
    Amr Elfakharany

    Hi,
    There is no option to prevent this. When you create a order with reference the operation and components are copied from the referenced order. A solution would require a modification.
    -Paul

  • Copy control from Sales Order  to Purchase requisition

    Can any one guide me how to set this, which fields need to be copied from Sales order to Purchase requisition.
    Vasu

    I don't think so sap has provided this kind of control but you can configure certain things as item category level for thirdparty in SD
    SPRO-SD-sales-sales document-sales document item-define item categories
    here you can check for item category TAS or you can create your own

  • Copy Control within Sales Order (Contract)

    Hi Guys,
    I have a requirement to stop the copy of the Exchange rate from the Header Level of the Contract to the Line Level of the Contract. Its under under billing on both Header and Line level. Contract is created via VA41.
    I have tried VTAA, however I cannot find exactly where I can make this change, is this the right area, if so would you be kind enough to pin point the area?
    Thanks for your help!
    Cheers.
    Emal

    Hi,
    Please use following use exit to do so
    As I believe you are not using with reference of other contract to create contracts, the copy control is used when you create the new docuement with refernce with other docuement.
    V45W0001 Function module exit for copying sales header data into items for contracts.
    This enhancement contains the user exit: EXIT_SAPLV45W_001
    Activities:----
    1. Create your enhancement, using a project (CMOD). You can either use an existing one or create a new one.
    2. Activate the project.
    The ABAP coding will only run once the project has been activated. Until then the enhancements will not take effect.
    regards
    Vivek.

  • Copy control from Sales order to Delivery field FAKSK (Billing Block)- VTLA

    Hi All,
    I'm facing a standard issue, inputs and resolution from you would be appreciated,
    Issue is, If we put the Billing block in Sales order header this should not allow us to create an Invoice, But in my examples i can create the Invoice without any errors!
    The billing block from SO will be copied into Delivery header? if yes this will definitely not allow in my cases to create an Invoice, but i cannot see the Billing block copied into my Delivery! any Copy control settings missing?
    Why the Invoice will not check the Billing block from Order while creation?
    Thanks and best regards,
    Siddaram

    The billing block from SO will be copied into Delivery header? if yes this will definitely not allow in my cases to create an Invoice, but i cannot see the Billing block copied into my Delivery! any Copy control settings missing?
    Check Copy settings in VTLF tcode. Target is your delivery type. Source is your Sales Order type. Double Click to see Data transfer. Click on the small icon in field Header Data. Find your routine number and select source text. Look at the code if there is mention about LIKP-FAKSK field. You don't have ABAP, search the forum or google on how to comment it on your own to remove this data transfer.
    Why the Invoice will not check the Billing block from Order while creation?
    Check Copy settings in VTFA if it is Sales Order to Billing or VTFL if it is Delivery to Billing. Do something like above to find routines. But this time round is to check Copying requirements not data transfer and it can be at billing type level or at item level. If no check on VBAK-FAKSK field, you can copy the standard routines or make modification to customized routines to build the requirements checks. If no ABAP, search google on how to change routines.

  • Copy control for sales douments

    Hi to all. I just wanted to find out about a minor issue. When creating my sales document with reference to a previous sales document (example a quotation with reference to an inquiry), it does not pick up the line items (material and its quantity) from the predecing document (no line items in my quote that are in the inquiry). had a look at my copy control, and my copy requirements for these document types are 302 "Always an item".
    Please advise.
    Regards
    Ebraim

    Dear All,
    Thanks for the very helpul insight. I looked at my copy control configuration and it seems I had missed a small setting.
    I have a new problem now....
    When I try to post goods issue after completing the delivery, it gives me the following error:
    "For plant P100, material type FERT is not defined in Table T134W"... I havechecked the table in se16, and material type FERT is there.
    Please advise, and thanks alot.
    Regards,
    Ebraim

  • Copy Control for Sales Document to Sales Document

    Hi Gurus Good Morning to Every body,
    here my quesry is I have two sales order types.
    ZST1 and ZST2.
    first i created a sales order in sales document type ZST1, system has generated a no.
    now here i am creating a sales order(ZST2) with reference to above sales document no.which has generated in above step.
    then i save this document.
    here my question is when i am taking with reference of the same sale document no second time which has created in ZST1
    system is automatically copying but here i want to generate a warning message or error message.
    but system is not doing like that.
    system is copying full quantity with out generating a message.
    dear guru's please give the need full help.
    with regards,
    Edited by: SDGURU on Oct 12, 2009 11:38 AM

    Hi,
    This can be done at the ITEM CATEGORY level
    Goto the transaction code VOV7 and choose your item category and maintain the COMPLETION RULE with B, then once the Source document was fully referenced then next time when you  want to create the sales order with reference to the order referenced already, system will throw error.
    Try this,
    Hope it will serve your purpose.
    thanks,
    santosh

  • Creation of Custom IDoc with Message control for sales Order

    Hi all,
    I am trying to create custom Outbound IDoc with message control.
    I wrote the code in a function module and i want to register that function module. (as in inbound registration of function module as in BD51).I am not knowing if that registration is necessary for outbound Idoc, if so in which transacition?
    Please list me the steps to create a custom IDoc for Message control.
    Thanks in advance,
    Regards,
    John.

    Hi,
    You need to use FM : MASTER_IDOC_DISTRIBUTE to create outbound idoc.fill the data in the tables EDIDC,EDIDD and generate the IDOC.
    check this link:
    Re: Master_IDoc_Distribute
    and use transaction : WEDI for IDOC configurations.
    here you will have all the transactions(step by step) to set the outbound IDOC configurations.
    Regards
    Appana

  • Copy controls between sales order/contract and consignment fill up

    Hi all
    My client has received service contract from single party for 100 different locations..For this he needs to install equipment at each location and  installed equipment will be taken back once the service contract is over.
    For installation equipment  transfer he is following consignment agent system
    (kb-ka).
    But he want to track his order in SAP for how many locations he has processed KB order.whether total order has been completed or not.
    For this purpose he want to maintain quantity contract and subsequently he want  to release KB with reference to contract.
    How I have to maintain copycontrols between CQ and KB in system (Thereis no copycontrols availble for consignment agency in sap standerd)
    Please suggest the way . Most urgent
    Thanks  & regards,
    Ratna

    Dear Ratna
    Since you said that your client is using KB order type, instead of going for quantity contract, why dont you assign the different locations as ship to party in KB order itself so that whenever quantity is delivered, you can keep track of the same through movement type.
    Thanks
    G. Lakshmipathi

Maybe you are looking for