COPY CONTROL NOT PRESENT FOR SALES DOCUMENT TYPE DS

I am new beginner to the module SD, i am stuck on the issue regarding copy control
I have created an Schedule Line Agreement and want to copy it to the sale document OR standard order, once entering the number for the schedule line document , i am getting a message the copy control rule does exist for DS to OR.
I have been to the setting for copy control with T-code VTAA but there are many fields that required to be filled up,
Which fields do i fill in ?
I have filled in the fields for item category for OR (TAN) and for DS (LPN).
If i use the copy control with these settings i am getting an error message "The copying routine number for table VBAP is missing in table TVCPA"
Any Help would really would be helpful
Regards,
Sahil

Sahil,
I suggest you close this question, since this is an MM forum. You are unlikely to get many answers here.
I also suggest that you first perform a search, before re-posting this question elsewhere.
First, search within the forums (search box on the upper right of this screen). I just tried a search on 'copy control' and got over 20,000 hits. Surely one of these posts will be able to help you.
Next, check online help. This help is generic, and not generally specific to a particular industry:
http://help.sap.com ERP SD Help starts at
http://help.sap.com/saphelp_erp60/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm
Next, look for generic solutions in Best Practices. This main Library is
http://help.sap.com/bp_bl604/BL_IN/html/Content_Library_BL_EN_IN.htm
Next look for industry specific solutions in Best Practices:
http://help.sap.com/content/bestpractices/industry/index.htm
If you are experiencing a problem, or you believe that SAP is not working per the online help, you can then search OSS notes.
http://service.sap.com/notes
Next search in one of the standard online search engines (such as Google).
Only after you have performed all of these searches, and studied all of the online help that is supplied for free by SAP, then consider posting a question to these forums. A good SD forum is
SAP ERP Sales and Distribution (SAP SD)
Best Regards,
DB49

Similar Messages

Immediate Transfer Order Creation not occuring for Sales Document Type

Hello gurus,
I have a situation where a transfer order is not being created immediately for a specific sales document type.
Here is an example document flow of a desired scenario where the system is working:
Sales document type: ZOR
> Delivery type: LF
> WMS transfer order
The Item Category in this scenario is TAN.
Here is an example of the document flow in the current scenario where the system is not working:
Sales document type: ZPRD
> Delivery type: LF
The Item Category is also TAN in this scenario. The only identifiable difference in these scenarios is the sales document type. For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created. For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
Is there a configuration setting that is controlling this? Any help would be greatly appreciated.

Thank you very much for the link. When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
The problem I'm running into now is the configuration setting that controls this. I thought I figured it out when going to this IMG path:
SAP Customizing Implementation Guide --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Output Control --> Define Print Parameters Shipping
When selecting the Delivery Note, the shipping point I was using was not configured in this location. I added the shipping point into this transaction, saved, and created a new order & delivery. However, the WMTA output type still was not automatically inserted into the delivery when saving. Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery?

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

Archiving control not maintained for CIR document .T-code MD82

Hi All,
I have archived sales order till 31/12/09 in the production system, but the Customer Independent Requirement that is
CIR documents (MD82) are also there in vbak table ,now i have closed all the open document by putting rejection reason.
When i am trying to archive the document it is giving the error "Archiving control not maintained for the document" .please
suggest where to maintain these archiving control and what is to be maintained.
Thanks and Regards
Abhilash Nayak

Hi,
Check your entries in tcode VORA.
Regards,
Eduardo

Field Exit for Sales Document Type in VA01

hi
i want to do field exit for Sales Document Type in VA01.
but i dont know to find the correct exit.
pls tell the exit name and the steps to find it.
thank u

Hi,
Goto this link u will get the information u required....
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
Check the numerous threads that already exist in SDN :
CMOD and SMOD
http://www.sap-img.com/abap/what-is-user-exits.htm
Regards,
Manish

Billing block for customer for sales document type OR

Hi
I want to block a customer for a particular sales document type OR
How to do it?
Regards

Hi Nikhil
There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
SAP Documentation:
Check partner authorizations
This check determines whether a partner is authorized to release against a contract.
Procedure
Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
Partners in the contract
If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
Partners in the hierarchy
If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
Note
If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
Regards.
Mikel

Link for sales document type and PO/delivery number

Hi guys,
I have a PO number(EKPO-EBELN) and the delivery number for STO(LIKP-VBELN), how am i going to link this 2 to get the SALES document type(AUART)?
thanks a lot!

mark,
So this is really not possible to get the pricing condition using the BAPI_SALESORDER_SIMULATE since this bapi requires the sales document type?
it depends if your delivery wrt to Sales document which is VBAK-VBELN than you can use above FM.here your deliver is created from STO so now you have to use select quesy as i already suggested as vijay also.
you may want to do same.
Amit.

Number range for sales document type

Hi,
I am having 1 client under that 5 company codes, ade according to that 5 plants & 5 sales organization.
so for one comapany code including all there are 15 sales document types same for other also
my question is
How can I assign number range for all that?
If i am going to maintain seperate document type it goes to 75
which userexit will help me out for this?
without userexit what is the otherway?
regards,
Rahul

Not only at order level, you will have to use exits at delivery and billing document level also.
For sales documents:
Exit USEREXIT_NUMBER_RANGE in MV45AFZZ
For delivery documents:
Exit USEREXIT_NUMBER_RANGE in MV50AFZ1
For billing documents:
Exit USEREXIT_NUMBER_RANGE in RV60AFZZ
You need to give tables for maintaining numbers for sales, delivery and billing documents. In the exit a select query can be written to fetch the data based on the parameters like sale orgainzation, company code etc.
Regards,
GSL.

Authority-Check for Sales Document Type

Hi All...
I would like to incorporate Authority-Chack for the field Sales Document Type "TVAK-AURT"...
Can any one give me the sample code or exact code..?
I have written Authority-check for Sales Organization as follows...
authority-check object 'V_VBAK_VKO'
                 id 'VKORG' field i_sales-vkorg
                 id 'VTWEG' field '00'
                 id 'SPART' field '00'
                 id 'ACTVT' field '03'.
        if sy-subrc ne 0.
        delete i_sales.
BUT HOW TO WRITE FOR V_VBAK_AAT..??

Please check object: <b>V_VBAK_AAT</b> for the same.
EG:
authority-check object 'V_VBAK_AAT'
id 'AUART' field L_AUART
id 'ACTVT' field '03'.
Kind Regards
Eswar
Message was edited by: Eswar Rao Boddeti

Checking rule for sales document types

Hi,
Can I change the cheking rule for a sales document type? Where could I change it? or should I build Z table?
Thanks!

7,
Checking rule is hard-coded into standard SAP sales doc maintenance programs. For SOs, it is A or A* (depending on the stock type). For Deliveries, it is B or B*. There is no way to use standard configuration to alter the rule within SD.
Best Regards,
DB49

Output Type ZNEU not working for PO document type ZNB

Hi all,
I have copied from standard the document type ZNB, and also the output type ZNEU, (from NB and NEU), I have made and checked all the setting on NACE (condition records, procedures, output types and sequence) everything is same as standard, I have also mantained in the "Fine-Tuned Control: Purchase Order" the indicators 1 and 2 (for new and change) for ZNEU, and mantained in MN05 the entry for ZNB Doc Type with VN media=1, date/Time=4 so for me these is the only setting needed but for some reason I am not getting the message automaticaly, but if I create manually the message while creating the PO then it works fine.
For Doc type NB and Output type NEU the system gererates correcly the message so I don't know what could be happening here.
The reason I created these copies (ZNB and ZNEU) it's because I have a different plant in a different company code which need to issue PO's and need a different number range and also different FORM (with the logo of the other plant/Company)
Any ideas on how to correct this??
Regards

The problem was that in spanish, the function partner VN and CP are PR and PR so this was confusing and the records were crossing each other, thanks to every one

Number Ranges for sales document type

Dear All,
I have four company codes. I am assigning the same sales order type for all company codes.
I want to have diffrent number ranges for diffrent company codes for same sales order type. Is this possible?
Please advise
Regards,
Deepu Pillai

Dear Deepu,
A similar kind of requirement, has been stated in to the following thread:
[Different S.O. No. Range|Re: User Exit No for assign a different internal document number to VA01;
Include Program: MV45AFZZ
User-Exit: USEREXIT_NUMBER_RANGE
In the above thread, the routine has been modified as per the requirement "Different S.O. No. as per Sales Org."
You may Discuss the same with ABAPer to modify Routine in FORM USEREXITNUMBER_RANGE_; as per the requirement: "Different S.O. No. as per Company Code"
The user exit is called up in the FORM routine BELEG_SICHERN.
You need define the number range depending on the selling company (VKBUR)
Tabl
Best Regards,
Amit
Note: For further assistance, if Reqd.:
[SD Doc. No. Range Enhancement|http://www.saptechsolutions.com/pdf/SDDocumentNumberRangeEnhancements.pdf]

User exit for VA01 - No range for sales document type

Dear Experts,
In our project, we have 8 sales organizations and these are assigned to 8 different company codes. Actually our client doesnt want to maintain different document types for each Sales Organization. We need to maintain one document type for all the sales organizations and different No ranges for each sales organization. So can any one guide me on User exit available for this purpose.
Thanks & Regards,
Rahul

hi,
pls refer to the following user exit.
Include prog : MV45AFZZ
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
reg
Deepak

Sales Document Type(Urgent)

Hi All
I ma getting the message <b>billing plan type not maintained for Sales Document Type</b> . But when I check the Sales Document Type in SPRO. There I have declared the billing Plan Type. I am not able to understand where the problem is.
regards
Vijai

Hi Vijay,
Are you using periodic OR milestone billing plan in your project ?
If NO , then
Please keep the field 'billing Plan Type' blank in sales order.
If YES , then
Please complete the configuration specified in the path as given below :
SPRO --> IMG --> SD --> Billing -->Billing Plan
Define Billing Plan Types
Define Date Descriptions
Define And Assign Date Categories
Maintain Date Proposals For Billing Plan Types
Assign Billing Plan Types To Sales Document Types
Assign Billing Plan Types To Item Categories
Define Rules For Determining Dates
hope this helps you.
Pls reward if found useful.
Regards,
Gaurav Raghav.

Regarding-Copying from sales document type

Hi Friends,
I am trying to create Good Stock return with reference of sales invoice. While entering the reference number system is giving a error message which says u201CCopying from sales document type ZEXP to RE is not Supportedu201D. How to resolve this issue?
Regards,
Shankar G

Hi Shankar,
You need to maintain the copy controls from Invoice to Sales document. Because your Invoice type is customized.
You need to copy from F2 to RE and make the changes as per yopur requirement ZEXP to RE . Then try to create the return order with reference to invoice.
I hope its clear.
Regards,
SK

COPY CONTROL NOT PRESENT FOR SALES DOCUMENT TYPE DS

Similar Messages

Maybe you are looking for