Copy control Settings from a Quotaion to Value contract/Quantity Contract

Hello Friends,
I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
Thanks and Regards
Mohammed Roshan

if you run VTAA you would try to create a copy control as follows:
source: QT (quotation)
target: CQ (quantity contract)
say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
save it and test.
good luck!

Similar Messages

  • STO Process Copy control settings

    Dear Gurus,
    I am having issues with item number in purchase order and delivery document. I require the same item numbers in purchase order to be copied to delivery document. I think i got to do something with copy control settings. Please help me. I am confused since its an STO process.
    Thanks in advance

    Hi George,
    Here customization can be done as follows:
    Step 1: SPRO --> MM --> Purchasing --> PO --> Set up STO
    In this step the customer number and sales area is assigned to Supplying & Delivering plants.
    Step 2: SPRO --> Logistics Execution --> Shipping --> Delivery --> Copy control --> Specify Copy control for Deliveries
    Check the settings made for DL to NL (STO) and DL to NLCC (Cross company) copy control settings.
    Step 3: T.Code OVLK
    The Delivery document types NL and NLCC needs to be assigned with "B" in the order required field. Thus, the system understands the data for delivery document has to be copied from Purchase order.
    Thanks & Regards,
    Sharan

  • Copy control settings for Multilevel variant configuration

    Dear All,
    I have  the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
    with reference to this quoatation a sales order is created.
    My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
    In copy control settings there is a field at item level called
    configuration :
    In this if I maintain value
    A: The variant is getting copied but  the values for subitems is not getting copied the values for main material is in changable mode.
    B: The variant is getting copied but  the values for subitems is not getting copied the values for main material are not in changable mode.
    C:The variant is getting copied   the values for subitems is  getting copied the values for main material are  in changable mode but the values for subitems are not in changable mode.
    My requiremnt  is that
    The variant must get copied
    the values for subitems must get copied
    the main material vlaues must be in changable mode
    the subitems vlaues must be in changable mode
    How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
    Informative answers will be provided maximum points.
    Deepak

    Hai Deepak Mehmi,
    please check in T CODE VTAA
    In the position check
    SalesDocType : Sales order type
    SalesDocType : Inquiry type
    Double clcik and check
    DataT 051 General header data       Copying requirements 002 Header-diff.customer
    DataT 101 Header business data
    DataT 001 Partner header
    And Tick mark for Copy Item Number
    For further check:
    In Item
                                      Copying requirements 301
    DataT 151 General item data                                          Pos./neg. quantity   +
                                                               Copy quantity
    DataT 102 Bus.data/item compl.                                     Pricing type         G
    DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                        Copy product select.
    FPLA  251 Conditions                Configuration
                                                               Campaign Deter.
    Regards,
    Mani

  • VTFL copy control settings not visible

    hi
    i am facing some problem in copy control settings - vtfl - delivery to billing type copy control
    when i am doing the required settings i.e copying ZLLZ delivery to ZFD billing type and saving the settings, a transport request is being generated and also it says tht data has been saved,but when i see the list i cannot see the new copy control tht i did.
    i can see these entries in the table TVCPF. but these entries shows billing type ZFD n delivery type ZLLZ
    along with additional entry in sales doc column as "ED"
    i am not able to understand from where this entry is being picked...
    an why i cant see the entries at VTFL
    can anyone help.

    Hi friend,
    Please try to check you documents in transaction code VTFL by giving the Billing document (first) and the delivery document.
    Definitely you can find the combination
    And for your another question , In the table TVCPF you can see the sales document type ED which would have maintained in the VTAF copy controls from the Sales document to Billing documents
    Please let me know if you have further queries.
    santosh

  • Can i copy my settings from one mac to another?

    Hi
    Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
    I need the settings for
    System (view, font, color,)
    Finder (view, etc)
    iTunes (that include all library, playlists, etc),
    Firefox (Bookmarks, settings & plug-ins),
    Safari (Bookmarks, settings & plug-ins),
    Address Book (contacts)
    Thuderbird (emails accounts, contacts, passwords, etc)
    Stickies (stickies on the dock - i have info on there unsaved)
    Filezilla (FTP infos)
    Would appreciate.
    Thnx.

    Prince Moe wrote:
    Hi
    Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
    I need the settings for
    System (view, font, color,)
    Finder (view, etc)
    iTunes (that include all library, playlists, etc),
    Firefox (Bookmarks, settings & plug-ins),
    Safari (Bookmarks, settings & plug-ins),
    Address Book (contacts)
    Thuderbird (emails accounts, contacts, passwords, etc)
    Stickies (stickies on the dock - i have info on there unsaved)
    Filezilla (FTP infos)
    Would appreciate.
    Thnx.
    All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5.  let us know if you need more help.  Also make sure you copy most of your preferences in the user/library/prefences folder.
    Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder.  Remember that only if the image or backup is identical to your production OS.

  • Basic Difference: Copy Control Settings

    Dear All,
    I have got confused over Copy Control Settings b/w
    VTFA & VTFL.
    Please help me to understand the both (with differences).
    Best Regards,
    Amit.

    Hi
    VTFA is order to billing copy controls
    that is in order's item category the billing relevence will be order related billing like cash sales , return order etc
    Means your sales order is referrered for billing
    VTFL is Delivety to billing copy controls
    that is in your order's item category the billing relevence will be delivery related billing like standard order, rush sales etc
    Means your delivery document is referred for billing
    Hooe it calrifies
    Regards
    Raja
    Edited by: ramanathan raja on Sep 15, 2008 4:33 PM

  • Copy control settings needed for order related billing

    hi,
    sap gurus,
    please provide the copy control settings related order related billilng and order related proforma invoice.
    thanks in advance
    regards,
    balaji.t

    Dear,
    1 )Use TCODE -- VTFA  and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
      If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
    and maintain as suggested above.
    At Header Level -- COPYING REQUIREMENT (001)
    At ITEM Level-- COPYING REQUIREMENT (001)
                              DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                             Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
    2) Use TCODE -- VTFA  and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED  PROFARMA BILLING in similar way u can maintain for ur Z Documents
    At Header Level -- COPYING REQUIREMENT (007)
    At ITEM Level-- COPYING REQUIREMENT (008)
                              DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                             Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
    need further help revert back.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • How can I restore Parental Control Settings from Time Machine Backup?

    I was trying to adjust one of the parental controlled accounts for my child.  I disabled parental controls, rebooted, and re-enabled it.  Now all the settings that I had setup before are gone.  How can I restore Parental Control Settings from Time Machine Backup?

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • Contract type (value contract &quantity contract), Costomization

    Contract type (value contract &quantity contract), Costomization

    Restriction for camical meterials to sold or perticular meterial to be sold for perticular customer,What is the procedure?

  • Copy control settings in billing plan order ( Milestone billing)

    Hi ALL,
    in my scenario i have a billing plan order in which there is a material of total value 500 rs and then divided into three billing plans. like first date it will be say 100rs, 2nd date 300rs and then on the 3rd date 200rs, then the sales order is saved. when i created a proforma invoice from the sales order i am getting 3 line item there in the proforma invoice like as follows
    material
    XYZ------  100rs
    XYZ------  300rs
    XYZ------  200rs
    so the material is divide into 3 line items according to the billing plan which is maintained in the sales order.
    can it be possible to bring only onle line item in the proforma invoice with the total amount like
    Material
    XYZ--- 500rs
    are there any settings in copy control between sales order and billing which i missed?
    Looking forward.
    regards,
    Subhrangshu

    Dear Subhrangshu,
    If you want the entire amount to be reflected in the invoice, why are you using a billing plan?
    Can you share with us the scenario in detail?
    Thanks & Regards,
    Hegal K Charles

  • Copy Control Question from FI guy regarding Cr Memo via VA01

    Good Morning SD guys-
    I need your help as my SD counterpart couldn't help me.  I have an enhancement where the business would like to have automatic clearing for invoice and credit memo's via F.13.  To do this, I need to understand Copy Control.
    Here are the requirements/ current configuration:
    Assignment field is the Sales order #
    Reference field is the Purchase order #
    When I view the Credit Memo under the Document flow (users create credit memo with reference to invoice via VA01):  the item category is G2N.  The Copy Control does not mirror what I see above.  It is blank for Assignment field and reference field.
    The Copy Control mirrors F2 (Invoice) LF (Delivery).  Our SD consultant couldn't explain to me why this is.  Is this correct?  Shouldn't Copy Control mirror to that Target Sales Doc type which in this case is RK (Invoice Correct. Req CR)?
    If anyone could answer why it isn't logical to me, I would appreciate it.
    I don't understand this and I don't see where, other than Document flow the original invoice number is to make this automatic clearing happen.
    Thank you.

    Hello AMS
    In both cases - LF to F2  or equivalent Z- doc types- (VTFL)  and  CR to G2 or equivalent Z- doc types (VTFA), the header copy control setting should be:
    B Sales order number  for Assignment Number
    and
    A Purchase order number  for Reference number
    However for cancellation type of billing documents, the config from the document type  (V) takes precedence.
    Also note that reference number and the assignment number can be entered automatically in the billing document by
    copying from the sales order
    or
    automatically determined by the system - I am guessing user exits or some FI config.

  • Copying email settings from my iPad doesn't work

    I can receive IMAP email on my iPad, but even if I copy the settings exactly to my iPhone I get the message "cannot connect to IMAP/POP server" (tried both)
    I've deleted and re-input the details. I've douuble-checked the password. I've re-started and reset the phone
    Can ayone help please?

    I gave up trying after about 10 attempts. Half an hour later my phone suddenly started downloading emails from the server it "couldn't connect to". So there probably wasn't a problem in the first palce.
    Another iPhone mystery then?

  • Copy Mail settings from one mac to another

    I have a main desktop running snow leopard, but just acquired a powerbook g4 with Tiger on it. How can I transfer my my mail settings from my desktop to my powerbook? or can i?
    Message was edited by: freak

    Hi, I never tried going backwards with it, but the files/folders involved for 10.4 anyway are...
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    For Address Book...
    Files...
    /Users/YourUserName/Library/Preferences/com.apple.AddressBook.plist
    /Users/YourUserName/Library/Preferences/com.apple.AddressBook.abd.plist
    Folders...
    /Users/YourUserName/Library/Application Support/AddressBook/
    /Users/YourUserName/Library/Caches/com.apple.AddressBook/

  • Copy Control settings : Copy Only Manual conditions

    Hi,
    I have following configuration in SPRO for 'copying control of item categories':
    Source item category- ZSPP
    Target item category - ZPQL
    Copying routine - 900004
    Copy Conditions - Only Copy Manual conditions
    This copy control configuration will be used in 2 scenarios :
    1. When creating service contract quote as follow-up to service contract
    2. When creating service contract as follow-up to some other document type which is custom
    My copying routine is required only for first scenario. So, I have put one conditions in my copy routine(CRM_COPY_BADi) and it is working fine. This copying routine is getting triggerd only for first scenario.
    However, my another requirement is,
    Copy conditions - should be "Copy Manual conditions" for scenario 1 and
    Copy Conditions - should be "Copy All Conditions" for scenario 2.
    So, could you please let me know, how can control this, sinca same item categories are used in both the scenarios. I can't create or change the item categories since already they are in use.
    The baseliine is : I am able to control the copying routine by keeping a condition in CRM_COPY_BADI. But, at the same time I should control "COPY CONDITIONS" also.
    Is there any way to control through config or coding?
    Please help me.
    Thanks,
    Sandeep
    Edited by: Sandeep Reddy on Aug 17, 2010 1:37 PM

    Dear,
    1 )Use TCODE -- VTFA  and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
      If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
    and maintain as suggested above.
    At Header Level -- COPYING REQUIREMENT (001)
    At ITEM Level-- COPYING REQUIREMENT (001)
                              DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                             Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
    2) Use TCODE -- VTFA  and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED  PROFARMA BILLING in similar way u can maintain for ur Z Documents
    At Header Level -- COPYING REQUIREMENT (007)
    At ITEM Level-- COPYING REQUIREMENT (008)
                              DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                             Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
    need further help revert back.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Update Qty and Value in Quantity Contract

    Hi,
    With reference to Quantity Contract when we i create release order the status of quantity Contract should l be changed.
    Example
    Order Qty in Quantity Contract    100 pc             Value 10000
    One Release order is created  with Order qty 20   Value 2000
    Now in the contract where can i see open order qty and open order value.
    in VTAA item category KMN -
    TAN the setting has been checked for "Update Doc Flow"
    Regards
    Jyoti

    Hi,
    Just try this and let me know your expected result.
    1. Go to VA42 to VA43.
    2. Enter your contract number and press document flow button.
    3. See whether the Qty and value is getting displayed or not.
    4. If not getting displayed. Do execute the below steps.
    5. In document flow screen, select your contract document.
    6. In top menu : Documen flow->View-> Items.
    7. Now, the systme will display the Qty and value of delivered/not delivered information.
    Regards,
    Vijay

Maybe you are looking for