Copy control UB to ENL

Dear all,
I am interested to know the transaction to find out copy control for STO , order type UB and delivery type is ENL and delivery item category is NLN .
Can any body please post.
Note : If you provide the node of SPRO , it will be appreciated.
saravanan
Edited by: k saravanan on May 10, 2008 5:29 PM

Dear AKK ,
Thanks .
I am interested to know , incase of sales order to delivery , we do copy control keeping source key and target key .
The same way , i could not able to find incase of STO , keeping source key as UB and say target key as NL or ENL .
Is there any link provided through routine or config ?
saravanan
Edited by: k saravanan on May 21, 2008 9:24 AM

Similar Messages

Copy Control

What kind of config is needed to make a free goods order type billable (zero dollar billing), Tried adding the billing type into the field Dlv-rel.billing type in VOV8. Doesn't allow to create the invoice.

Hi Arju,
In order to create an invoice for a free goods order, pl. maintain the following:
1) Make the item category relevant for billing
2) Maintain a default dlvy related billing type in customizing for sales document VOV8
3) Maintain copy control between dlvy and billing document.
Thanks
Kapil Sharma

Update copy control?

How can we update a copy controls?
Thanks!

Dear Raghav,
In IMG under
Sales and Distribution -> Sales -> Sales Documents -> Maintain Copy Control for Sales Documents -> Copying Control: Sales Document to Sales Document
or Transaction VTAA
Sales and Distribution -> Sales -> Sales Documents -> Maintain Copy Control for Sales Documents -> Copying Control: Billing Document to Sales Document
or Transaction VTAF
Regards,
Naveen.

Copy Control between Sales Orders and Deliveries

Hi Gurus,
please can you tell me why copy control between Sales Order and Delivery doesn't work?
At header level, into copy control, we can set 2 requirement routines, one as general requirement for copying (TVCPL-AUBED) and the other one as requirement for grouping orders into deliveries (TVCPL-AUZUS).
At header level we can also set a routine for data transfer to define how data are passed from Sales Order header to Delivery header (TVCPL-GRUAK).
Then we can set routines at item level, one as requirement (TVCPL-AUBED) and one as data transfer (TVCPL-GRUAP).
When delivery is created with VL10A transaction, at header level only the first general requirement routine is used (FV50B***). Grouping requirement is not used (we also set a break point and the program is not passing into this routine).
Then it is used the requirement routine at item level (FV50B***).
Please can you tel me how we camake working the routine for grouping requirement at header level?
Thank you very much.
Kind Regards
Andrea

Hi, we used standard routine even if to be sure we run also the generation report you mentioned.
Please any other suggestions?
Thank you very much.
Kind Regards
Andrea

Complaint wth ref. to invoice in CRM - Copy control not taken into account!

Hi all,
We are facing problems when replicating return orders (business object Complaint) with reference to invoices in ERP.
The copy control in ERP is not taken into account. Does anyone know if it is possible to check the copy control when replicating the complaint to ERP with reference to the invoice?
The return order is being replicated correctly and the link to the invoice is shown (so, the flow is correct).
But:
1.- The manual pricing conditions in the invoice in ERP are not being copied in the return order.
2.- Some data as the 'Incoterms' is being redetermined from the customer master data and is not being copied from the invoice.
3.- Data related to material is also being redetermined when the order is replicated
The copy control is not being taken into account and we can replicate return orders from CRM to ERP with reference to invoices for which the copy control is not maintained in ERP...
Please help...
Thanks in advance!
Yolanda

Try something like this, in place of ls_input_field_names-fieldname = 'ZZDEP2PVNDPGM'..
ls_input_field_names-objectname = 'ORDERADM_H'.
ls_input_field_names-ref_handle = '100'.
insert ls_input_field_names into table lt_input_field_names.
Edited by: Kevin Alcock on Aug 10, 2009 4:03 PM

Follow-up transaction copy control for opportunities

Our CRM system is currently configured to permit follow-up opportunity creation. When follow-up transactions are created all product categories are copied to the new opportunity. We would like to stop this. All header and business partner data should be copied as present, however product information should not be copied. (i.e. follow-up transactions currently work, we only want to switch off product data copying)
I am not familiar with follow-up transaction customization, and not sure exactly where to start. Should I be modifying the current BAdI or is there a standard customizing option to switch off copying of product categories?

Hi Derek,
Just try this:-
Go to SPRO->IMG->CRM->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types.
Search for entry Source=oppt and target=oppt.In this entry, uncheck the check box-Copy Item Number and see if it resolves your issue or not?
Thanks and Regards,
Rohit

Copy Control for Transaction Types

Hi,
Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
ZAPP = Custom Appointment Activity
ZCON = Custom Opportunity
Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
Thank you,
Sebastiaan.

Hi Kai,
Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
Thank you,
Sebastiaan.

Repricing the SAP contract generated from follow up doc in copy control

Hi,
I am facing issue with the conditions copy at item categories level at the time of follow up document in copy control.
The challenge is like this:
There is an option for the conditions copy for line item level upon which the corresponding pricing is generated.
D -- Copy all Conditions
C -- Copy manual conditions
The issue here is at config level they will maintain only Copy manual conditions depending upon whether it is a follow-up / Copy it should change the behavior as Copy all Conditions.
I tried to do this with crmv_event(After with reference::50) though but the problem is its triggering after the pricing got generated.
Welcome you ideas to resolve the issue.
Thanks & Regards,
Madhu J

Hello Ravikanth
With status management it's not possible to prevent the creation of follow-up documents in CRM.
You have to use the badi CRM_COPY_BADI. Here the exception DO_NOT_COPY must be raised. But it's not possible to gray out the path of the follow-up transactions e.g. for 'varian quote'.
I hope this could be helpful.
Best regards,
Maggie

For creation of follow up transactions automatically through Actions do we require copy control?

Hi All,
I have to create folow up transactions automatically when quotation gets approved. My question is when we create a follow up transaction automatically through Action Profile is it required to have copy control settings or not?
Thanks,
Rao

the idea of using copy control would be to copy the data as needed from the base transaction so that your follow up transaction data is consistent. You need to check your requirement and find attributes that needs to be copied over before you determine this.
I hope this helps.
Thanks,
Aparna

Credit Memo Request (Copy Control)

Hi everyone. Can anyone give me a hand, please?
I would like to send an error message if a end-user is trying to create a Credit Memo Request (tr:VA01) with reference to a billing document which has been cancelled (tr: VF11) already. Actually the system let me do that, but the client doesn´t want to support it anymore.
Thanks in advance.

You can maintain the Same in the Copy Control between Billing Document to Sales Order in a Routine that if VBELN in VBRK - FKSTO is "X" ,do not allow to maintain / Save the Sales Order.
Best Regards,
Ankur

Copy controls from quotation to contract

Hi,
My client want to create contract w.r.t quatation.
I maintained the copy controls for the same but target quantity is not getting updated in contract w.r.t qutation
2)while creating contract without reference order quntity is not getting updated.
Pls suggest what i may missed
Thanks in advance

Hello Dear
This is NOT standard SAP process flow.
But make sure u have copy control at HEADER and ITEM CATEGORY level.
And as your qty is not getting copied that means some thing is wrong with Routines( copy control and data transfer).
Thanks,
Dilip Sadh

Copy control from quotation to sales order

HI ,
Though my quoation is incomplete it can be copied into sales order, kindly suggest me a so;ution where in incomplete quotaion cannot be copied into sales order.Kindly explain me teh setting in TCODE (VTAA) STEP BY STEP.
Regards
Sunaina

hi,
Copying control for sales documents is in Customizing, under Sales and Distribution - Sales - Maintain Copying Control for Sales Documents.
In this you can change the procedure by not selecting incomplete quotation for sales order, but this can be done only when some of the data in quotation is missing.
like dont give the validity date in quotation and save it before providing the validity date.
Maintaining an Incompleteness Procedure
An automatically-created quotation does not contain a Quotation-valid-to date. The customer's system requires this information for processing; therefore you have to add it to the quotation prior to saving the document, and before generating the message to the customer.
The incompleteness control is set up in such a way that the quotation is incomplete if this date has not been entered. In Customizing for Sales and Distribution, you choose Sales and Distribution - Basic Functions - Incompleteness Control for Sales and Distribution Documents, to assign sales document type QT (quotation) to incompleteness procedure 10, which contains the field for this check.
Message Control
The following message types have been created to Sales and Distribution (SD) in the vendors system:
·        Message type AN00 for the quotation
·        Message types POST and PNST for status inquiries
·        Message types BA01 and BA02 for the order
         confirmation and amendment respectively
·        Message type LALE for the delivery
·        Message type RD00 for the invoice
regards,
Siddharth.

COPY CONTROL: SALES ORDER WITH REFERENCE TO QUOTATION

Hi.
We are creating a sales orders with reference to a quotation. When copying, we'd like to be able to include another new position type in the sales orders.
For example:
QUOTATION:
POSITION 10: TYPE ZTAB
SALES ORDERS:
POSITION 10: TYPE ZTAB
POSITION 20: TYPE IRSS.
Where could we place this change?. We suppose when saving the sales orders. Does anybody know how could we make this change?.
Thank you very much!.
Raú

What do you mean by position type?
Please use the language used by SAP so that it could be easily understood.
What is ZTAB & IRSS. Are they materials?
Regarding copying, this is a brief theory
In copy control, you define control data for the document flow of sales documents.
You can specify for a particular sales document type, which document type is to be assigned to copied reference documents, and which item categories or schedule line categories are to be copied.
You must also make specifications for copying requirements and data transfer, as well as quantity and value updates in document flow.
In precise, you are telling the system what data to copy from QT to sales order. It copies data from Quotation order type to Standard order type basing on settings you indicated in copying control.
System won't do anything more than copying from preceding documents and it would transfer data based on copying rules in copy control.

How to delete a Item line in a Sales Order during Copy Control

I want to delete a Line item (VBAP ) record for a certain condition during Copying from reference . I am writing the code in the Data Transfer Routine 151 which is called through VOFM Transaction . I cannot delete it as it . it is a work area VBAP . When i Clear it in debugging i am only able to clear the Line items . I want to completely remove the line . Is there a user exit for the same .

Hi,
You should create a new copy requirement routine at item level in order to exclude the unwanted item.
Assign the requirement routine to each item category type in the copy control .
Regards,
Andrea

Copy control in contracts

Good afternoon!
I´m having problems regarding copy control between contracts and release orders.
Here´s an example:
Contract 40000019 has an item for 100 pcs.
I input a order which is referenced by this contract, and the system proposes a quantity of 100 pieces. The quantity is changed to 50 pcs manually and is delivered afterwards.
When I input a second order, the system proposes again 100 pieces.
First question: Is there anyway to make the system propose only the un-delivered quantity? i.e. the remaining 50 pieces?
Second question: how do I make the system not to copy rejected items?
Thanks in advance,
Adriano Cardoso

Hi ,
In standard system settings once we take the reference it will copy either whole quantity or nil quantity.We can make the quantity field as empty by making changes in copy controls.If you want to make the balance quantity for delivery ,then need to adda piece of code for your copying requirement for field VBAP.KWMENG and check the quantity already delivered by going in to VBFA table then pick all the subsequent documents for the contract.
It is also important to check the field update document flow tab in copying controls to restrict the quantity.
Hope it helps.
Regards,
Pasapula.

Copy control UB to ENL

Similar Messages

Maybe you are looking for