Copy Cost Element groups to Financial Statement Version

Hi
Can anyone tell me if it is possible to copy cost elemnt groups to a financial statement version?
Is possible to copy Profit Center Accoount groups to financial statement version?
Will appreciate any response.
Thanks in advance

Hi
I am not sure if cost element groups or PC groups can be copied to FSV.
Firstly, I would like to know the logic for such assignment.
However pls check the link
http://help.sap.com/saphelp_45b/helpdata/en/eb/13717743c411d1896f0000e8322d00/frameset.htm
Reg
Suresh

Similar Messages

ALE Distribute Financial Statement version /Cost Element group

Hi SAP guru,
Would any of you advise me of Standard SAP transaction to send Financial statement version or Cost Element Group via ALE(IDOC)?
I am aware of BD18 to send GL master data (program: RBDSEGLM) to send IDOC out of SAP but also looking for a similar function to send FSV or Cost element group
Kind regards
taro

Hi
Thanks for your note.
Please advise me on the financial statement version, as well.
The reason for investigating this is to find out standard way to distribute/extract FSV out of SAP for both nodes of FSV and assignment of the GL accounts to the nodes.
If you could give me some hint, i would be more grateful.
Kind regards
taro

Default group(example P+L result) in Financial statement version

Hello everyone.
I have question.
I see in financial statement
version. transaction code OB58.
there are default group such as Asset,
P+L result
how can I configure these group ? what transaction code to
edit group and display ?
please advice.

Hi,
When you create the FSV in transaction code OB58, these nodes get automatically generated and you can not directly configure any items or any accounts against these groups. If you want to use thses groups, you need to first define your items and then reassign these automatically generated items against those configured items which you will create. You can define your item first by clicking on the "Create Item" option. When you create this option place your cursor on the FSV. After that you can reassign the automatically generated items, under your configured items. Next you can assign the GL accounts again those items. Please check the screen shots below where first I have created one item called BS. Then I have reassign the "Asset" which were automatically created under BS. Then I have assign GL account range against "Asset" by taking reference from OBD4.
The item BS is created by selecting the option "Create Items". After that selected the item "Assets" by clicking on the button . Then place the curson on BS and click on the button . The following screen will open.
Group Asset is assigned under BS. Then click on the BS and choose the option Assign Account to assign the GL range.
Finally the GLs are assigned.
Please let me know if you have any questions.
Regards,
Pintu

Copy financial statement version with different chart of accounts

Hi all,
it is possible to copy financial statement version with different chart of accounts? If I copy the financial statement version, the Financial statement items are assign from the chart of accounts which were in the original financial statement version.
But I need to change the chart of accounts and accounts assignment as well. Is this somehow possible?
Thanks
Miroslav

Hi,
It does not make much sense, as FSV is based on chart of accounts. You will have to build your FSV from the scratch.
Regards,
Eli

How to created an cost element group structure from P&L FSV

Hi All,
My client has changed his financial statement version and I have to change the cost element group structure according to the new profit and lost structure of this new FSV.
Do you know any transaction to do this automatically?. For example the creation of the sets' structure can be done by FSE5, is there any similar for cost element group structure?.
Many thanks in advance!

Hi NIketa
Whats the detailed error message? Can you paste that here?
Also, check the following, which may resolve your issue
1. If you are settling to the Top most WBS, i.e. to the project itself, do not do that... Settle it to a lower level WBS, atleast one level lower than the project...
2. Check if the status of that WBS is REL (released) and
3. The flag for "acct asst elem." is checked in the WBS element
Regards
Ajay M

Financial statement version download/upload

Hi all,
I have the following question concering the financial statement version:
I want to bulid up structures and data from one SAP system in another SAP system. Therefore I also like to create the same financial stetement version.
Is there a chance or possibility to download or export the structure (e.g. as a text file .txt) and then import or upload the fsv in the other system. (the same process is for example possible for cost element groups or cost center groups - e.g. from prod. system to sandbox).
Thanks in advance.

Hi Eli,
thanks for your answer.
But I do not want to insert table content directly in the relevant SAP table, e.g via SE16N (to avoid inconsistencies).
The FSV is quiet large - therefore I also do not want to take over the content manually.
further ideas?
Thanks.

Planni values at cost element group level instead of at cost element level

Is it possible to plan values at cost element group level instead of at cost element level in BI?
Similary I have another question for financial statements.
Is it possible to plan values at financial statement level instead of at G/ in BPS or SEM?
Thanks

Hi.
It depends on what you mean "cost element group".
If you mean node (not leaf) in hierarchy so the answer is NO.
If cost element group is regular characteristic so the answer is YES.
Regards.

Plannig values at cost element group level instead of at cost element lev

Is it possible to plan values at cost element group level instead of at cost element level in BPS or SEM?
Similary I have another question for financial statements.
Is it possible to plan values at financial statement level instead of at G/ in BPS or SEM?
Thanks

You mean that I am on the wrong forum. Which forum is useful for me for this question?
Thanks

IDOC to JDBC scenario in case of Cost Element Group IDOC.

This is an IDOC to JDBC scenario.
The Cost Element Group IDOC is having different segments. The main segment E1COGH (1...unbound) is consisting of different subsegment like E1OGS (0...unbound) & E1COGV (0...unbound). The main segment (E1COGH) along with subsegments E1OGS & E1COGV) is occuring more that 1 times. I have to insert data into the table, which we can do in single rows (no hierarchy is possible in tables). I have used "use one as many" in message mapping. Now if E1OGS or E1COGV is repeating in a single E1COGH segment then we dont get any error. But if I duplicate the main segment then I am getting runtime exception.
Please suggest about how to map in this case.

In my scenario:
     E1COGH
     |
      -> E1COGS
         E1COGV
where     E1CGH -> Main segment
     E1COGS & E1COGV -> sub segment
E1COGH -> 1..unbound
E1COGS -> 1..unbound
E1COGV -> 1..unbound
At the target side I have created two Statement Structure (ie.Statement & Statement_1) . One for E1COGS (ie. Statement) & the other for E1COGV (ie. Statement_1).
Case 1 -> If E1COGS is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGS is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement & in the absence of E1COGS this Statement structure is SUPPRESSED.
Similarly,
Case 1 -> If E1COGV is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGV is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement_1 & in the absence of E1COGV this Statement_1 structure is SUPPRESSED.
All the elements of the segment E1COGH, E1COGHT & E1COGHR are replicated in all the rows for X (no. of occurance of E1COGS) + Y (no. of occurance of E1COGV).
While testing in Message Mapping, I am able to get the output as for multiple occurence of E1COGS & E1COGV in a single E1COGH.
But if I increse the occurence of E1COGH the it is giving the following error :
Runtime exception during processing target field mapping /ns0:MT_Cost_Element_Group_Response/Statement/DBtablename/access/GROUPNAME. The message is: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.flib3.CollapseContexts@51197231, , ]
Please suggest how to map the occurence of E1COGH simultaneously with the occurence of E1COGS & E1COGV.

Financial statement version in fs00 how do i change the lanugage to english

Hi Experts
I am currently asked to train a beginners course AC010 for FI. Below is one of the tasks i have to take the students through.Please look at F is where my question is??
Enter the new G/L account 700## in the financial statement version INT so that it
appears as the correct balance sheet item when the balance sheet is run.
1. The new account has to be entered in financial statement version INT. Enter
it in the same financial statement item as reference account 70 000.
a) If you have exited the previous screen, choose Accountingu2192Financial
Accounting u2192 General Ledger u2192 Master Records u2192 G/L Accounts u2192
Individual Processing u2192 In Company Code.
Fill in the following data.
Field Name Value
G/L account 700##
Company Code 1000
b) Choose Change.
Continued on next page
68 © 2006 SAP AG. All rights reserved. 2006/Q2
AC010 Lesson: G/L Master Records
c) Choose Edit Financial Statement Version.
d) Enter the following in the Select Financial Statement Version dialog
box.
Field Name Value
Financial statement version INT
e) Click Choose.
If you did remain in the screen from the previous exercise, the financial
statement should be automatically expanded to show you where the
reference account, 70 000, is located in the financial statement version.
If you have to call up the screen again, the financial statement version
does not automatically open at account 70 000. In this case, execute
the following step.
f) Drill down to the Liabilities u2192 Equity Capital u2192 Subscribed Capital
balance sheet item by clicking the folder icon in front of the balance
sheet item.(ALL these are displayed in another language how do i change to english??????????????????????????????????????????)
g) Select Subscribed Capital and choose Assign Accounts at the top of the
screen. Insert in the line From acct. To acct. the interval 700## to
700##. Select D & C (for debit and credit balance). If you do not see a
free row where you can enter your account, use the Next Page icon at
the bottom right of the dialogue box to insert an empty row. Do not type
over an existing account, as you will replace it with your account!
h) Choose Continue (Enter).
i) Choose Save.

Hello,
If you want to change the GL account language, then FS00 check last tabs.
If you want to change FSV language, then copy the FSV to another language in OB58
Regards,
Ravi

Financial statement version-OB58 required in current settings

Hello Group,
I want to bring Financial statement version-OB58 in current settings like others such as OB08, OB52 and FTXP.
Can anybody suggests me about how to bring in current settings wherin I can directly modify my FSV thru OB58 in production client.
Pl.guide me.
Thanks in advance,
Regards,
Kedar.

I applied FSE2 to the Role for my Control Team to update and change the FSV.
Not sure about that note.
We find a transaction in the IMG, add it to a role and test before moving it to Production. Not all IMG activites have transactions....

Import / Export Financial Statement Version

My customer wishes to edit the Financial Statement Version, particularly the Account Group Hierarchies, in the Production environment. This can be accomplished by implementing OSS Note 200674.
However, our issue is, how do we get those changes to the FSV to be reflected in our lower (Development) environment? We have an ALE in place for GLMAST which pushes down the account numbers themselves. But changes to the FSV, movements of an account from one node in the hierarchy to another, are not reflected in the lower environment. Is it possible to export the FSV from Production to an external file, then import that file into the Development environment? Is there an ALE object that could handle this task.
Thanks in advance for any help you may be able to provide.
Regards,
Shawn

Hi,
You can transport the FSV from the producton system.
Go to SPRO to Define Financial Statement Versions node. select your FSV, click on "Tableview" on left corner of screen & click "Transport".
Create a transport request. Here you may need BASIS help---Download the CO file & Data file of this request on your system (desktop).
Import these files to development system. This will bring the necessary changes to FSV on Development system.
Hope this helps.
Regards,
Ashutosh

Financial statement version : unassigned accounts

Hi all,
I have a problem with Financial Statement display and I couldnt figure it out. I have assigned all the accounts in Financial statement version and its working fine in traditional F.01 financial statement report .i.e. all the accounts are displaying their balances under the groups as defined in Financial statement version but when I run the new Financial statement report (S_PL0_86000028 - Financial Statement: Actual/Actual Comparison) using the same Financial statement version, it is showing all the P&L accounts in unassigned section instead of showing under the groups as in F.01.
Can any body help me with that.
Thanks
MKR

Hi,
check again
Go to TC OB58 and select relevant financial statement version.
select financial statement items select expand subtree button
In MENU select Structure - check -
in that select non assigned gl accounts and fill required like chart of accounts and company code
ENter
Now u can view non assigned accounts
Hope u r doubt clear, assin points
Regards
Ram

Problem in financial statement version

Dear all,
I have a problem relating to Financial statement version.my client copy th eold FSV and created a new one .but after that in the F.01 the new and old showing different results.and in the new FSV in F.01 the data is also not coming under various heads.
Please guide for the same
Regards
Meruta

Hi,
Make sure that all the GL accounts that have been assigned to FSV have transaction data in them.If you dont have transaction figures posted to any account in the client in which you copied the FSV ,these accounts will not show up in FSV.
Regards
A
Assign points if useful

Company Code restriction at Financial statement Version

Hi All,
We have a requirement from business for company code creation, and all elements will be same as existing company code like CHOA, FSV, PPV,FYV,CO Area etc, however my client create this company code fro recalculation of Accural amount, so they want that whatever the document posted should not be reflect to company's corporate books means financial statemen. As iam very new iin this requirement, so request you to kindly suggest that is it possible in SAP. IF yes then how do we restrict company code at Financial statement version.
Thank you for your support in advance.
Regards,
Jamuna

Hi Gaurav,
Thanks for your response, it would be great if you can detailing the same, how do we exclude this field, do i need to take any ABAPER help, and also if this field get excluded, so will business be able to execute this report at company code level by selecting another company code associated with respective COA.
Thanks,
Jamuna

Copy Cost Element groups to Financial Statement Version

Similar Messages

Maybe you are looking for