Copy Data from Non CBF Planning Area to CBF Planning Area in APO DP

Hi Experts,
I am working in APO implementation in an automative client, here we have material type Vehi and configurable material.
I have done my forecasting in Non CBF planning area . Now I want to copy Key figure of final conenses forecast which is in non - CBF planning area to a CBF planning area .
Can anybody has worked on similar scenario or worked in copying data from a non - CBF planning area to CBF planning area.
Looking for your valuable inputs
Thanks and regards
Kapil

Hi Kapil!
We have the same need mentioned by you "Copy Data from Non CBF Planning Area to CBF Planning Areau201C.
We obtained the source data, but can not do to write the same in CBF area.
You managed to make the recording of such data in CBF area? How did they do it?
Thanks and regards.
Clelidon

Similar Messages

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

How to copy data from one planning area to other planning area

Hi ,
I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and here my scenario is one planning area having extra key figures.
First i need to release forecast data to CIP planning area and then, i load the data from infocube to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
Please help me in this. Please give me the stepls i need to follow.
Thanks in advance.
Regards,
Chandu

Hi,
You can use the transaction /sapapo/tscopy.
In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
Hope this helps.
Thanks
Mani Suresh

IP Exit Planning function copy data from cca to pca planning cubes

Hello All,
I have a requirement where I have to copy the characteristics and keyfigures of CCA plan cube data to pca plan cube data.The infoobjects in CCA aggregation level are are {0amount,0costcenter,0costelement,version,0calmonth,0infoprovider} which needs to be copied to corresponding infoobjects in PCA level {0amount,0profitcenter,0account,0version,0calmonth,0infoprovider}.
The CCA and PCA aggregation level are built on the top of the multiprovider.
I can do it using the fox coding but 0costelement cannot be mapped to 0account as these two are different fields.Since I have to copy the values of 0costelement to 0account , I was wondering how can I do it using the exit function.
As I have never used the exit function before, I was wondering if somebody can help me out with this.
By the way, I have read the forums and figured out to create a class in se24 and use interface
IF_RSPFLA_SRVTYPE_IMP_EXE and since I am generating some records , will be using the method IF_RSPLFA_SRVTYPE_IMP_EXEC~INIT_EXECUTE.
By the way , I read in the forums where there are methods/function modules which can copy data from one aggregation level to another aggregation level.Anyways, can you tell how can I loop thru the records of CCA aggregation level and copy the records to the PCA aggregation level.
Edited by: nazeer on Feb 22, 2009 12:04 PM

This thread might help you.
https://forums.sdn.sap.com/click.jspa?searchID=22634973&messageID=5317176

What are the diffrent ways to copy data from one application to another?

Hi,
Can you guys tell me what are the different ways to copy data from one application to another application??
I know we can do it through script logic using DESTINATION_APP.
Is there any other way to copy data from one application to another application?
Please help me
Thanks,
Charly

You can also call a custom DTSX package in SSIS via the datamanager.
there are at least 5 ways of transfering data in BPC between apps.
1. Through the front end (excel etc) via evdre/evsnds
2. Through Script logic using *Dest App
3. Using BPC's standard export dtsx package via DM
4. Using SSIS using BPC's custom SSIS tasks
5. Through Script logic using stored procs.
i am sure people will come up with more.
remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Copy data from one Table to another Table

How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
Thanks...

Question 1:
I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
Question 2:
You have two options, but you may not have privileges for both.
Option 1:
DELETE FROM tableowner.tablename; COMMIT;
Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
Option 2:
TRUNCATE TABLE tableowner.tablename;
Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL.

I need to copy data from a table in one database (db1) to another table in

Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advance

How many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar

Copying data from excel(more than one row) and pasting into table control

I have a requirement to copy data from excel and have it pasted it into the corresponding fields table control when the user clicks on an icon.For the first part I used a class to copy it from the clip board.By the previous process,I get the data inside an internal table, but even after trying to split the data using 'split at cl_abap_char_utilities=>horizontal_tab into table itab.' it's not working.The table and the excel file are of the same structure.
Does anyone know any cause as to why it might not work?Is there any other way to achieve my objective?
Bon

Hi,
try to get data into internal table as below
TYPES :     BEGIN     OF             ty_data          ,
            zbukr     TYPE           payr-zbukr       ,
            hbkid     TYPE           payr-hbkid       ,
            hktid     TYPE           payr-hktid       ,
            rzawe     TYPE           payr-rzawe       ,
            chect     TYPE           payr-chect       ,
            laufd     TYPE           reguh-laufd      ,
            laufi     TYPE           reguh-laufi      ,
            lifnr     TYPE           reguh-lifnr      ,
            vblnr     TYPE           reguh-vblnr      ,
            rwbtr     TYPE           reguh-rwbtr      ,    "uncommented
            unique_no TYPE           char13           ,   " Added SAP Doc. No. and current year concate in NEFT,RTGS and Fund Transfer cases
            END       OF             ty_data          .
DATA :      wa_file   LIKE LINE OF   it_file          ,
            wa_data   TYPE           ty_data          .
DATA:      it_data1 TYPE              kcde_intern WITH HEADER LINE,
           wa_data1 LIKE LINE OF      it_data1.
start-of-selection.
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
      EXPORTING
        filename                = lv_file1
        i_begin_col             = '1'
        i_begin_row             = '4'
        i_end_col               = '11'
        i_end_row               = '60000'
      TABLES
        intern                  = it_data1
      EXCEPTIONS
        inconsistent_parameters = 1
        upload_ole              = 2
        OTHERS                  = 3.
    IF sy-subrc = 0.
      PERFORM format_data.
    ENDIF.
FORM format_data.
DATA : ld_index TYPE i.
FIELD-SYMBOLS : <fs>.
DATA it_tab LIKE wa_data OCCURS 0 WITH HEADER LINE.
      LOOP AT it_data1.
        MOVE it_data1-col TO ld_index.
        ASSIGN COMPONENT ld_index OF STRUCTURE
        it_tab TO <fs>.
        MOVE : it_data1-value TO <fs>.
    MOVE it_data1-value TO p_table.
        AT END OF row.
          APPEND it_tab.
          CLEAR it_tab.
        ENDAT.
      ENDLOOP.
       it_data[] = it_tab[] .
    ENDIF.
endform.                    "format_data

My external hard drive ejects when copying data. It works on windows and ubuntu. Are there any fixes?

My external hard drive ejects when copying data. It works on windows and ubuntu. Are there any fixes?

mine do the same thing... its one of the bugs from the 10.6.8 update

How to copy data from mac to external HD Drive

How do i copy data from mac book to an external hard disk drive?

Click on the Desktop area (the area where there are no open windows or Dock)
Look at the menu at the top next to the small Apple, it should say Finder
Click on the File men and select New Finder Window
Click on the File men and select New Finder Window (or stick in a disk, a USB, connect a hard drive and double click on the icon that appears on the Desktop)
Grab the Window by the top area by clicking and holding the mouse button down so both are side by side.
Click on the sidebar or open folders on the first window to get to where your files are
Click on the sidebar or open folders on the second window to get to where your destination is going to be
Click and drag the files or folder from one window to the other
If this occurs between volumes, it will copy
If this occurs on the same volume, it will move them
If you want to copy on the same volume, use the Finder > File > Duplicate and move the copy

XML script to copy data from one repository to another

Hi all,
a customer wants an xml script that copy all data from the repository A to the repository B. I think that this is not possible to do this with an xml script, because the script tags (add-item, update-item, query-item, import-item, load-item, remove-item) seems don't give this feature. The same for RQL, that doesn't give you a command like "SELECT INTO".
But what i'm asking is: Is there a way to run the copy using the repository script tags?
Thanks.
Edited by: user10980894 on 11-lug-2011 3.33

Please elaborate , If what you need is to copy data from between two dissimliar repositories then it is not possible , but if a and b are having the same structure then you might be able to do that using the following and tweaking the generated xml
Both the repositories should have the same structure and name , please follow the below commands and you will be able to export the data in below format , see if this is all you want
export using
bin/startSQLReository -m module -export all outputfile.xml -repository repositoryA
Change the reference to repositoryA in the file
import using
bin/startSQLRepository - m module - import outputfile.xml -repository repositoryB
<add-item item-descriptor="priceList" id="plist4350003">
<set-property name="description"><![CDATA[Group of Thirteen States which is generally called as L13 in AT&T]]></set-property>
<set-property name="displayName"><![CDATA[L13]]></set-property>

<set-property name="basePriceList"><![CDATA[listPrices]]></set-property>
<set-property name="creationDate"><![CDATA[9/3/2010 07:38:49]]></set-property>
<set-property name="lastModifiedDate"><![CDATA[9/10/2010 17:02:09]]></set-property>
<set-property name="itemAcl"><![CDATA[Admin$role$administrators-group:list,write,write_owner,write_acl,read_owner,destroy,read_acl,read;Admin$role$everyone-group:list,read]]></set-property>
</add-item>
please refer to this section of ATG Repository guide for further info

Move data from Non Partitioned Table to Partitioned Table

Hi Friends,
I am using Oracle 11.2.0.1 DB
Please let me know how can i copy /move the data from Non -Partitioned Oracle table to the currently created Partiotioned table.
Regards,
DB

839396 wrote:
Hi All,
Created Partitioned table but unable to copy the data from Non Partitioned table:
SQL> select * from sales;
SNO YEAR NAME
1 01-JAN-11 jan2011
1 01-FEB-11 feb2011
1 01-JAN-12 jan2012
1 01-FEB-12 feb2012
1 01-JAN-13 jan2013
1 01-FEB-13 feb2013into which partition should row immediately above ("01-FEB-13") be deposited?
[oracle@localhost ~]$ oerr ora 14400
14400, 00000, "inserted partition key does not map to any partition"
// *Cause: An attempt was made to insert a record into, a Range or Composite
//          Range object, with a concatenated partition key that is beyond
//          the concatenated partition bound list of the last partition -OR-
//          An attempt was made to insert a record into a List object with
//          a partition key that did not match the literal values specified
//          for any of the partitions.
// *Action: Do not insert the key. Or, add a partition capable of accepting
//          the key, Or add values matching the key to a partition specification>
6 rows selected.
>
SQL>
SQL> create table sales_part(sno number(3),year date,name varchar2(10))
2 partition by range(year)
3 (
4 partition p11 values less than (TO_DATE('01/JAN/2012','DD/MON/YYYY')),
5 partition p12 values less than (TO_DATE('01/JAN/2013','DD/MON/YYYY'))
6 );
Table created.
SQL> SELECT table_name,partition_name, num_rows FROM user_tab_partitions;
TABLE_NAME PARTITION_NAME NUM_ROWS
SALES_PART P11
SALES_PART P12
UNPAR_TABLE UNPAR_TABLE_12 776000
UNPAR_TABLE UNPAR_TABLE_15 5000
UNPAR_TABLE UNPAR_TABLE_MX 220000
SQL>
SQL> insert into sales_part select * from sales;
insert into sales_part select * from sales
ERROR at line 1:
ORA-14400: inserted partition key does not map to any partition
Regards,
DB

Copy data from 1 company code to another company code

hi friends
my client has 3 company codes but now they want to close one company code for that they want to copy data from one company code to another company code after copying the data they want to delete that company code
i am fresher to sap(fico) please tell me the solution for this,
1) what is the process of copy from one company code data to another
2) what is rules and integrations for that

Company Codes are the individual identity and we have to give accounting details (Balance Sheet and Profit and Loss account) to statutory bodies so deletion of Company code or coping data from one to another is not posible and not suggested too.
Expalin your client to block all the transaction in one company code and transfer all the closing balance as per trail balance, open Purchase orders, open Sales orders, inventory valuation to another company code and start doing trasaction there.
This is the only solution as per my knowledge.
Uttam

Copy Data from Non CBF Planning Area to CBF Planning Area in APO DP

Similar Messages

Maybe you are looking for