Copy Data From PDF

Hi,
I having an WD JAVA application where a filled in Interactive PDF Form is upoaded through File Upload UI.
In the appliocation, there is a local node (Cardinality = 1:1) where the Data from PDF has to be copied to that.
Please let us know how to do that without parsing.
Thanks and Regards,
Chandran S

Hi,
If you want to get the data from PDF form without parsing you need to do binding of all the fields of addobe form to webdynpro context.
You must be having a application for saving the pdf form to your system so just open the form in Interactive form Ui element and after selecting the UI element from adobe form go to binding tab under object tab.  Bind the field with the proper context in default binding section. But first make sure that your dataSource property of the Interactive form element is bind with the datanode.
In that way after uploading the form data will come to webdynpro context automatically.
Thanks & Regards
Ravindra Singh

Similar Messages

  • Copying text from pdf, "square" characters

    Using SQL 2005 standard edition.
    I have an issue with pdf generated reports. When copying text from the pdf (from a cell in a table row) the characters are just pasted as "squares" into notepad\word etc. Each character is just a small square. I am using Arial font and not doing anything outside of the norm. This is also an inconsistent problem, it doesnt happen on all cells\tables but only on particular ones. Could it be data specific?
    Anyone come across this before?

    It is not data specific but the format specific. There are many similar issues commonly encountered. The reason is that the format in the clipboard cannot be well recognized by notepad or word. You can refer to this article:
    http://support.microsoft.com/kb/212318
    From which you can read:"Microsoft Word does not directly support conversion from Adobe Portable Document Format (PDF). PDF is the format in which documents are saved for viewing and exchange in the Adobe Acrobat Reader and Adobe Acrobat Exchange for Windows."
    For those words if you could not copy/paste successfully, you may use some tools from Adobe company to extract the data from PDF file to some recognized format such as HTML. I know that there is a tool which can do this conversion:
    http://www.adobe.com/products/acrobat/access_onlinetools.html
    Hope this answers your question.Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • ADF 11g can not select and copy data from cell of readonly table in IE

    hi,
    In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
    is it a bug?
    Edited by: kent2066 on 2009-5-18 上午8:46

    Hi Timo,
    Sorry forgot to mention versions.
    We are using 11.1.1.7 and IE 9.
    I tried in Google but could not get the solution.
    Kindly let me know solution for this.
    PavanKumar

  • Help with exporting data from pdf form

    I have about 100 pdf forms that I created in adobe forms central and distributed as a pdf form (rather than on the web). I am trying to export the data into a spreadsheet but when I export it, the fields are all jumbled in the csv file, as in they are not in the same order. I need to export the data all together so I'm going to the forms menu and selecting "manage form data" and then selecting "merge data files into spreadsheet". I tried exporting a single file but that gave me something really weird.
    Please help, I have a deadline next week to analyze this data and can't make sense of it once it is exported to a spreadsheet.

    Would you please share your form with me and send me one of your pdf forms and some of the csv files?
    You can share your form by doing the following:
    1. Click on the “Share” icon on the bottom left corner.
    2. Click on “Add Collaborator” on the popup menu.
    3. Enter [email protected] under “People to share with”.
    4. Set subject to "Export data from pdf form"
    5. Click the “Share” button on the bottom right of the dialog.
    Thanks
    Ken

  • Copy data from one Table to another Table

    How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
    Thanks...

    Question 1:
    I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
    1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
    2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
    3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
    Question 2:
    You have two options, but you may not have privileges for both.
    Option 1:
    DELETE FROM tableowner.tablename; COMMIT;
    Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
    Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
    Option 2:
    TRUNCATE TABLE tableowner.tablename;
    Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
    Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL.

  • Copying data from one table to another table thru java

    Hi
    I have to copy data from table emp in Database A to table emp in Database B. My input would be table name and number of rows to be fetched. these rows i need to insert in table B.
    The problem over here is I won't be having any info. of table emp i.e the number of columns it has and their type.
    So is their any way i can copy the data from one table to other without having the info abt the number of cols and their type.
    TIA

    Cross post - http://forum.java.sun.com/thread.jspa?threadID=5169293&messageID=9649839#9649839

  • Copy data from one table to another

    Hello everyone,
    I have a student table with fields sno, sname. I created another table student1 with same fields sno, sname and with one new field class.
    Now i want to copy data from sno, sname of student table to sno, sname of student1 table when the class field in styudent1 has no data i.e., its null.
    Could any one let me know how to do this?
    Thanks,
    Prathima

    i want to copy data from sno, sname of student table to sno, sname
    of student1 table when the class field in styudent1 has no dataSo what is the join condition? What column in STUDENT1 tells us what row in STUDENT to copy?
    Cheers, APC
    Blog : http://radiofreetooting.blogspot.com/

  • I need to copy data from a table in one database (db1) to another table in

    Hi
    I need to copy data from a table in one database (db1) to another table in another database (db2).
    I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
    How am I supposed to this using sql statements..?
    I shall be happy if it is explained SQL also...
    Thanking in advance

    How many rows does the table contains? There are manyway you can achieve this.
    1. export and import.
    2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
    example:
    create a dblink in db2 database for db1 database.
    create table table1 as select * from table1@db1 -- when there is no structure present
    -- you need to add constraints manually, if any exists.
    insert into table1 select * from table1@db1 -- when there is structure present.
    If the table contains large volume of data, I would suggest you to use export and import.
    Jaffar

  • Copying data from excel(more than one row) and pasting into table control

    I have a requirement to copy data from excel and have it pasted it into the corresponding fields table control when the user clicks on an icon.For the first part I used a class to copy it from the clip board.By the previous process,I get the data inside an internal table, but even after  trying to split the data using 'split at cl_abap_char_utilities=>horizontal_tab into table itab.' it's not working.The table and the excel file are of the same structure.
    Does anyone know any cause as to why it might not work?Is there any other way to achieve my objective?
    Bon

    Hi,
    try to get data into internal table as below
    TYPES :     BEGIN     OF             ty_data          ,
                zbukr     TYPE           payr-zbukr       ,
                hbkid     TYPE           payr-hbkid       ,
                hktid     TYPE           payr-hktid       ,
                rzawe     TYPE           payr-rzawe       ,
                chect     TYPE           payr-chect       ,
                laufd     TYPE           reguh-laufd      ,
                laufi     TYPE           reguh-laufi      ,
                lifnr     TYPE           reguh-lifnr      ,
                vblnr     TYPE           reguh-vblnr      ,
                rwbtr     TYPE           reguh-rwbtr      ,    "uncommented
                unique_no TYPE           char13           ,   " Added SAP Doc. No. and current year concate in NEFT,RTGS and Fund Transfer cases
                END       OF             ty_data          .
    DATA :      wa_file   LIKE LINE OF   it_file          ,
                wa_data   TYPE           ty_data          .
    DATA:      it_data1 TYPE              kcde_intern WITH HEADER LINE,
               wa_data1 LIKE LINE OF      it_data1.
    start-of-selection.
    CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
          EXPORTING
            filename                = lv_file1
            i_begin_col             = '1'
            i_begin_row             = '4'
            i_end_col               = '11'
            i_end_row               = '60000'
          TABLES
            intern                  = it_data1
          EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
        IF sy-subrc = 0.
          PERFORM format_data.
        ENDIF.
    FORM format_data.
      DATA : ld_index TYPE i.
      FIELD-SYMBOLS : <fs>.
      DATA it_tab LIKE wa_data OCCURS 0 WITH HEADER LINE.
          LOOP AT it_data1.
            MOVE it_data1-col TO ld_index.
            ASSIGN COMPONENT ld_index OF STRUCTURE
            it_tab TO <fs>.
            MOVE : it_data1-value TO <fs>.
        MOVE it_data1-value TO p_table.
            AT END OF row.
              APPEND it_tab.
              CLEAR it_tab.
            ENDAT.
          ENDLOOP.
           it_data[] = it_tab[] .
        ENDIF.
    endform.                    "format_data

  • Error while copying data from infoprovider to planning area

    Hi,
    Error for COM routine using application program (return code 40,075)
    Message no. /SAPAPO/OM102
    Diagnosis
    An application program has called a COM routine. During the process, an error occurred.
    I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
    How to resolve this?

    Hi,
    Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
    Below are the programs for the same.
    /SAPAPO/TS_lcm_cons_check
    /SAPAPO/TS_PSTRU_TOOL
    /SAPAPO/TS_PSTRU_CONS_CHECK
    Regards
    Kishore

  • Copy data from a UDO form to Goods Receipt PO using UI API

    Hi, all
    I tried to copy data from a UDO form to Goods Receipt PO using UI API through following codes.
    It works fine while copying to a Item-type Goods Receipt PO.
    But when the doctype is set to service, I got errors.
    I use for-loop to copy two items, Description and LineTotal, into the matrix of Goods Receipt PO form, but both failed.
    any suggestion?
    Edited by: Chao-Yi Wu on Aug 25, 2009 5:50 AM

    Hi  Chao-Yi Wu ,
    SBO_Application.ActivateMenuItem("2306")
    Dim oFormGR As SAPbouiCOM.Form = SBO_Application.Forms.ActiveForm
    Dim omtxIQC, omtxGR As SAPbouiCOM.Matrix
    Dim oedIQC, oedGR, oed As SAPbouiCOM.EditText
    Dim ocbIQC, ocbGR As SAPbouiCOM.ComboBox
    oFormGR.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE
    oedIQC = oFormIQC.Items.Item("13").Specific
    oedGR = oFormGR.Items.Item("4").Specific
    oedGR.Value = oedIQC.Value
    oedIQC = oFormIQC.Items.Item("21").Specific
    oedGR = oFormGR.Items.Item("24").Specific
    oedGR.Value = oedIQC.Value
    oedIQC = oFormIQC.Items.Item("edComments").Specific
    oedGR = oFormGR.Items.Item("16").Specific
    oed = oFormIQC.Items.Item("3").Specific
    oedGR.Value = oedIQC.Value + ", Goods Recript PO:" + oed.Value
    ocbIQC = oFormIQC.Items.Item("cbDocType").Specific
    ocbGR = oFormGR.Items.Item("3").Specific
    If ocbIQC.Selected.Value = "I" Then
         ocbGR.Select(0, SAPbouiCOM.BoSearchKey.psk_Index)
    Else
         ocbGR.Select(1, SAPbouiCOM.BoSearchKey.psk_Index)
    End If
    omtxIQC = oFormIQC.Items.Item("mtx_0").Specific
    For i As Integer = 1 To omtxIQC.RowCount
    omtxGR = oFormGR.Items.Item("38").Specific
           If ocbIQC.Selected.Value = "I" Then
                oedIQC = omtxIQC.Columns.Item("c_ItemCode").Cells.Item(i).Specific
                oedGR = omtxGR.Columns.Item("1").Cells.Item(i).Specific
                oedGR.String = oedIQC.String
                oedIQC = omtxIQC.Columns.Item("c_AQty").Cells.Item(i).Specific
                oedGR = omtxGR.Columns.Item("11").Cells.Item(i).Specific
                oedGR.String = oedIQC.String
                oedIQC = omtxIQC.Columns.Item("col_19").Cells.Item(i).Specific
                oedGR = omtxGR.Columns.Item("14").Cells.Item(i).Specific
                oedGR.String = oedIQC.String
       Else  
    omtxGR = oFormGR.Items.Item("39").Specific
               oedIQC = omtxIQC.Columns.Item("c_Descrp").Cells.Item(i).Specific
               oedGR = omtxGR.Columns.Item("1").Cells.Item(i).Specific
               oedGR.String = oedIQC.String
               oedIQC = omtxIQC.Columns.Item("col_16").Cells.Item(i).Specific
               oedGR = omtxGR.Columns.Item("12").Cells.Item(i).Specific
               oedGR.String = oedIQC.String
      End If
                Next
    for items the matrix is 38 and for service the matrix is 39
    Rgds
    Micheal

  • 2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
    If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
    Do you have a complete-drive backup of your old system?
    Matt

  • Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

    Hi all,
    I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
    I've had to force restart over a dozen times today :/
    I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
    If anybody could share some light into the report below I would be very grateful:
    Problem description:
    Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
    EtreCheck version: 2.2 (132)
    Report generated 5/2/15, 4:55 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro7,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:7:25
    Disk Information: ℹ️
        ST1000LM024 HN-M101MBB disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.mtrecorder.plist
    Launch Daemons: ℹ️
        [failed]    com.apple.spirecorder.plist
    User Launch Agents: ℹ️
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        Caffeine    Application  (/Applications/Caffeine.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            20%    WindowServer
             6%    com.apple.WebKit.WebContent(7)
             4%    Safari
             3%    hidd
             1%    launchd
    Top Processes by Memory: ℹ️
        1.07 GB    com.apple.WebKit.WebContent(7)
        439 MB    kernel_task
        90 MB    spindump
        57 MB    mdworker(5)
        57 MB    Safari
    Virtual Memory Information: ℹ️
        4.54 GB    Free RAM
        3.46 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 2, 2015, 04:47:31 PM    Self test - passed
        May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
        May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
    Regards
    Hoz

    Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
    My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
    The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
    The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
    This has happened about a dozen times.
    I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
    I have a 250 gb partition for the OS and the rest is my second partition for data.
    I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
    Any thoughts would be awesome. Thank you for reading and replying!
    Hoz

  • How to copy data from one BB to another via Desktop Manager

    I've got two BBs (8900 and 9300), both actively in use and with different data (contacts, memos, etc.) on them.
    I need to copy my tasks, memos and contacts from 8900 to 9300. I tried "switch phones" option, but it substitutes data, while I need to syncronize it, so that data from 8900 is added to what is currently is on the 9300. 
    Is it possible to do it via Desktop Manager? It seems there was somewhere an option "copy data from another BB", but I can't find it in the latest Desktop Manager version.

    You would need to use Desktop Mangaer to sync BB1 with a local PIM program (such as Outlook or Lotus Notes) to get the information off BB1. Then use Desktop Manager to sync BB2 with the same PIM program. 

  • Copying text from PDF to Pages

    I am trying to copy text from a PDF file into Pages, after pasting the copied text into my new Pages document the spacing between most of the text becomes corrupeted,
    for ex.
    "Copying text from PDF to Pages" is imported as "CopyingtextfromPDFtoPages"
    does anyone know how to correct this?
    Imac   Mac OS X (10.4.7)  

    Rishi,
    Welcome to Apple Discussions.
    After reading your post, I tried to duplicate this problem. I opened a PDF, selected a sentence, then copied it to the clipboard. I then opened Pages, selected the blank template, then pasted in the text. It pasted perfectly.
    Does this problem happen with all text in a PDF? With different PDFs?
    -Dennis

Maybe you are looking for