Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

Similar Messages

  • MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012

    I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
    where I can find this book.
    Thanks
     

    Hi Azhar lqbal Gondal,
    According to your description, since the issue regards training and certification,
     I suggest you post the question in the Learning forums at
    http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
     you can visit and post your question on  the SQL Server Forum.
    There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
    Exam content can be found here:
    http://www.microsoft.com/learning/en-us/exam-70-466.aspx
    http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Need Data Model and Report Suggestions in Design aspect

    Hi all,
    I have a requirement as shown below
    The reports need to be available on different hierarchy levels with corresponding levels of details. To aggregate the data the standard price is applied as the weighting factor. The STANDARD PRICE should be provided on IDH-VU (plant) level in EUR. The Logic can be seen below:
    mat, plt, Forecast, Actual, Absolute Forct Error, STD Price, Wgtd For Error(WFE),Weighted Actuals(WA), Agr Ext Sales FCA
    Absolute Forecast Error = ( F-A)      
    WFE= ( AFE * STD Price)
    WA= ( Actual * STD PRICE ) (1-(WFE/WA )
    m1, p1,   900,      600 ,          300 ,                               3 ,             3003 = 900  ,           6003=1800,                (1-(300/600))=
    m1,p2 ,  1000  ,      1200     ,      200 ,                              10 ,                 2000   ,                    12000    ,                  (1-200/1200)
    Total
    On country level:                                                                     Sum of WFE (SWFE)  Sum of WA(SWA)      (1-SWFE/SWA) 
    Figure 11: Aggregation Logic
    The forecast in quantity is multiplied with the STANDARD PRICE per unit. The sum of all weighted forecast, is the aggregated figure for the next level.
    HOw to get the value  (1-SWFE/SWA) in report and what model i should follow?
    Thanks & Regards
    Jana
    Edited by: Janardhan Karmala on Jan 5, 2012 3:01 PM

    Hi Dan,
    I have just joined this SAP community. Did you get any solution to your question? We have the same situation in our company too. I suppose Profit Center could be used for this, but ... is it possible to plan by trading partner GL company (intercompany transactions) in Cost Center accounting as well ?
    Thank you in advance!

  • Course 10778 Implementing Data Models and Reports with Microsoft SQL Server 2012

    Hi,
    I recently imported the virtual machines for the above-mentioned course. I am running Windows Server 2012 Standard edition on my pc. When I tried the first lab exercise, I could
    not open the report in MS Sharepoint Server. The error was to do with the following: "cannot impersonate user for data source 'AdventureWorksDW' ", and also "cannot convert claims identity to windows token sharepoint". I followed all the
    steps in the setup guide.
    Please assist me with this regard,
    Many thanks.

    Hi Zimiso,
    Based on the error message, it seems that the issue is caused by the incorrect configuration of Claims to Windows Token Service (C2WTS) that it was not running under a domain account.
    The domain account used by the Claims to Windows Token Service needs to be granted the following rights through the Local Security Policy:
    Act as part of the operating system
    Impersonate a client after authentication
    Log on as a service
    We can find these settings under Administrative Tools > Local Security Policy > Local Policies > User Rights Assignment. Please note that we should add the service account to the local Administrators Groups ahead.
    Reference:
    http://msdn.microsoft.com/en-us/library/hh231678.aspx
    http://blogs.msdn.com/b/psssql/archive/2012/08/20/sharepoint-adventures-reporting-services-claims-and-one-way-trusts.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to seperate Power Pivot Data Model and Power Pivot Report from Single Workbook.

    HI  Team,
    Initially, We have created Power Pivot report in workbook, containing Source Data Model as well.
    Now, we want to convert workbook having model as Shared Data Model, and all report needs to be part of single workbook.
    I want to implement one of the below solution, but know how to do it.
    1. Separate and Export all Power Pivot report sheet into single Excel Workbook such that it will have all report sheets.
    2. Use Same Model as it is and delete reports from existing one after export to new excel workbook.
    OR
    Is there is any other way to avoid re-creation of reports again? I want to use same report but instead of Embedded Excel data source, I want to use shared data Source in excel.

    One option is to use one workbook as the data source(model) and other workbooks for the reports.  This works in the stand alone Excel and SharePoint versions of Power BI, but not yet in O365 Power BI version.
    There is no export functionality. You would have to copy the workbook and update data source references. I have never tried it, but in theory it should work :).
    Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.
    Hi Michael,
    Yes your answer is partially correct..thanks for reply, I am working on Power Pivot reports on SharePoint.
    However, below issues observed.
    1. There is No Export Functionality ( as you told)
    2. We can not copy report sheet from workbook1 (which has Data Model) to Workbook2 ( only for report) using Control + C (copy) and Control + V (paste) option.
    Or Move Power Pivot Table ..
    So, solution can be (as you said, unfortunately I tried it already but dint worked)
    1. Copied workbook with New Name - Workbook2.
    2. Go to Data -> I tried to change connection setting -> to use shared Data Model -> I could create new Pivot table using shared Data Model
    But, Still I could use earlier designed Power Pivot tables as it is, to point to shared data model.
    I don't want to re-design entire report. As my project workbook has plenty reports.... :)

  • How to Extract data and reports from the SAP BW warehouse

    Hi to All Guru's
    I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools.  After Extracting the data from SAP BW how can we move all the data to Cognos.  It would be kind enough to provide me with any documentation or links.  Step by step procedure would be very much helpfull to me.
    Thanks
    Venu

    Hi Voodi
    Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos.  Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this.  Thanks for your concern.
    Venu

  • Synchronized my iPhone 3G 8G to copy the contacts and calendars from Outlook, I wonder if I can do the same synchronization to copy the same data from Gmail

    Synchronized my iPhone 3G 8G to copy the contacts and calendars from Outlook, I wonder if I can do the same synchronization to copy the same data from Gmail ?

    Right, I finally managed to get it sorted out.
    iCloud only accept version 3.0 vcards, and the one I was using were version 2.1 so that's why it wasn't picking it up. So the easy way to get that sorted out is, use a gmail account.
    I know you don't wanna do it because you think it's too much hassle and stuff, but trust me it only takes 5 minutes and that's it.
    1. Create a Gmail Account.
    2. Export your Old VCard files to the Gmail Account.
    3. Now Import them from Gmail to your PC again.
    And, that's it, that's just makes the new imported version in 1 file contains your all contacts in version 3.0. Now you can just upload that on icloud and then sync it with your iphone.
    That's what I did and it worked, and I am sure if you wanna replace this file in the Contacts folder under your User Account in Windows and then try to sync Contacts in Tunes, it should work, but as I said, I did it with iCloud and it worked for me. So aye, that's pretty much it. Phewwww..
    Been searching for it for the whole day and it took 5 minutes in the end, badass...
    Anyway, don't lose hope and always Google for everything!

  • Error to open a data model in Report builder (Word)

    Dear all,
    Im troubles when i try to open a data model in Report Builder (Word). Someone know about this problem?
    The message is: A error has ocurred. Check the settings and try again.
    Any suggestion?
    Thanks for all!

    I've also got this error several times. Usually the reason is an error in the Publisher query (or data template). It's better to first test (view) that you get a proper xml-output in Publisher, and only after that try to create an rtf-template. If this doesn't work, I usually start from the beginning, and first make a very simple report, then try the template, and if it works, then gradually increase elements for the Publisher side. Sometimes I haven't got any idea why it didn't work at the first place, when it then works after beginning from the simple report.

  • BW data model and impacts to HANA memory consumption

    Hi All,
    As I consider how to create BW models where HANA is the DB for a BW application, it makes sense moving the reporting target from Cubes to DSOs.  Now the next logical progression of thought is that the DSO should store the lowest granularity of data(document level).  So a consolidated data model that reports on cross functional data would combine sales, inventory and purchasing data all being stored at document level.  In this scenario:
    Will a single report execution that requires data from all 3 DSOs use more memory vs the 3 DSOs aggregated say at site/day/material?Lower Granularity Data = Higher Memory Consumption per report execution
    I'm thinking that more memory is required to aggregate the data in HANA before sending to BW.  Is aggregation still necessary to manage execution memory usage?
    Regards,
    Dae Jin

    Let  me rephrase.
    I got an EarlyWatch that said my dimensions on one of cube were too big.  I ran SAP_INFOCUBE_DESIGNS in SE38 in my development box and that confirmed it.
    So, I redesigned the cube, reactivated it and reloaded it.  I then ran SAP_INFOCUBE_DESIGNS again.  The cube doesn't even show up on it.  I suspect I have to trigger something in BW to make it populate for that cube.  How do I make that happen manually?
    Thanks.
    Dave

  • Error while creating Data Form Definition report from Planning

    Hi All,
    Working on Planning 11.1.2 (x64)
    I tried to generate a Data Form Definition report from Planning and found that I get an error if I select the option "Include member selection list". By going a bit deeper, I realised that it errors for some forms while works fine for others.
    I have tried to find any differences in setting or selection between the forms but haven't been able to see anything that struck me as a reason for error.
    Help please.
    Thanks,
    Abhishek

    The Planning sysout log says:
    [120910_091125126][oracle.apps.xdo.common.xml.XSLTWrapper][EXCEPTION] XSL error:
    <Line 1, Column 1068>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 1068>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 1075>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 1075>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 1082>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 1082>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 1089>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 1089>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 1096>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 1096>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 4586>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 4586>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 4593>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 4593>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 4600>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 4600>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 4607>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 4607>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 4614>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 4614>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 12215>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 12215>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 12222>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 12222>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 12229>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 12229>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 12236>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 12236>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 12243>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 12243>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 18528>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 18528>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 18535>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 18535>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 18542>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 18542>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 18549>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 18549>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 18556>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 18556>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 39824>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 39824>: XML-20250: (Fatal Error) Missing entity 'Scenario'.
    <Line 1, Column 39905>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 39905>: XML-20250: (Fatal Error) Missing entity 'PriorYear'.
    <Line 1, Column 39985>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 39985>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 39992>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 39992>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 39999>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 39999>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 40006>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 40006>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 40013>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 40013>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 41613>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41613>: XML-20250: (Fatal Error) Missing entity 'CommentYearTarget'.
    <Line 1, Column 41702>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41702>: XML-20250: (Fatal Error) Missing entity 'CommentYearTarget'.
    <Line 1, Column 41791>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41791>: XML-20250: (Fatal Error) Missing entity 'CommentYearTarget'.
    <Line 1, Column 41880>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41880>: XML-20250: (Fatal Error) Missing entity 'CommentYearTarget'.
    <Line 1, Column 41960>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41960>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 41967>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41967>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 41974>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41974>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 41981>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41981>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 41988>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 41988>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 46124>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 46124>: XML-20250: (Fatal Error) Missing entity 'CostCentre'.
    <Line 1, Column 47563>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47563>: XML-20250: (Fatal Error) Missing entity 'Scenario'.
    <Line 1, Column 47644>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47644>: XML-20250: (Fatal Error) Missing entity 'PriorYear'.
    <Line 1, Column 47724>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47724>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 47731>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47731>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 47738>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47738>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 47745>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47745>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    <Line 1, Column 47752>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 47752>: XML-20250: (Fatal Error) Missing entity 'Year5'.
    <Line 1, Column 49431>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 49431>: XML-20250: (Fatal Error) Missing entity 'Scenario'.
    <Line 1, Column 49512>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 49512>: XML-20250: (Fatal Error) Missing entity 'PriorYear'.
    <Line 1, Column 49592>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 49592>: XML-20250: (Fatal Error) Missing entity 'ThisYear'.
    <Line 1, Column 49599>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 49599>: XML-20250: (Fatal Error) Missing entity 'Year2'.
    <Line 1, Column 49606>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 49606>: XML-20250: (Fatal Error) Missing entity 'Year3'.
    <Line 1, Column 49613>: XML-20100: (Fatal Error) Expected ';'.
    <Line 1, Column 49613>: XML-20250: (Fatal Error) Missing entity 'Year4'.
    Most of these are Substitution Variables. I dont know why it is showing a few lines for "Scenario" as well.
    The Planning syserr log says
    java.net.SocketException: socket write error: Connection reset by peer.
         at jrockit.net.SocketNativeIO.writeBytesPinned(Native Method)
         at jrockit.net.SocketNativeIO.socketWrite(SocketNativeIO.java:73)
         at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
         at weblogic.utils.io.ChunkedOutputStream.writeTo(ChunkedOutputStream.java:193)
         at weblogic.servlet.internal.ResponseHeaders.writeHeaders(ResponseHeaders.java:443)
         at weblogic.servlet.internal.ServletResponseImpl.writeHeaders(ServletResponseImpl.java:1291)
         at weblogic.servlet.internal.ServletOutputStreamImpl.sendHeaders(ServletOutputStreamImpl.java:260)
         at weblogic.servlet.internal.ServletOutputStreamImpl.flush(ServletOutputStreamImpl.java:108)
         at weblogic.servlet.internal.ServletResponseImpl.sendRedirect(ServletResponseImpl.java:907)
         at HspValidatingHttpResponse.sendRedirect(Unknown Source)
         at jsp_servlet.__planninglogoff._jspService(__planninglogoff.java:1411)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at HspValidationFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    oracle.xml.parser.v2.XMLParseException: Expected ';'.
         at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:323)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:335)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:318)
         at oracle.apps.xdo.common.xml.XSLTClassic.transform(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
         at HspReportingServlet.Handle(Unknown Source)
         at HspHttpServlet.initialize(Unknown Source)
         at HspHttpServlet.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at HspValidationFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Would be great if you could interpret these log and let me know how I can resolve this.
    Cheers

  • DB link problem between active Data Guard and report application database

    My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
    I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
    SQL> select name, database_role, open_mode from v$database;
    NAME DATABASE_ROLE OPEN_MODE
    ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
    Problem detail is below
    I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
    SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
    Database link created.
    But when I run a query using db link from my report application database I got this below error.
    ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
    ORA-02063: preceding line from DATADB_LINK
    Then I check Active Data Guard database alart log file and get below error
    ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
    But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
    So is it a problem of DB link between active Data Guard and other database?

    Fazlul Kabir Mahfuz wrote:
    My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
    I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
    SQL> select name, database_role, open_mode from v$database;
    NAME DATABASE_ROLE OPEN_MODE
    ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
    Problem detail is below
    I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
    SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
    Database link created.
    But when I run a query using db link from my report application database I got this below error.
    ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
    ORA-02063: preceding line from DATADB_LINK
    Then I check Active Data Guard database alart log file and get below error
    ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
    But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
    So is it a problem of DB link between active Data Guard and other database?
    Check this note which is applicable for your environment
    *ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
    also
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

  • Newly registered user doesn't have Data Model or Report Creation option

    Hi,
    I have recently registered in http://bipdev2.us.oracle.com:7001/xmlpserver
    Except Create Report Job option, i do not have Create Data Model and Create Report options visible in my Home page.
    In My Account-> My Groups, in which i have BI Consumer Role assigned.
    Do i need to have a BI Administrator Role (or) BI Author Role to have these options enabled in my Home page?.
    or What is the procedure to request for access
    Any help regarding the same is highly appreciated.
    Thanks
    Parvez

    Hi,
    for the first part where you don't access I would suggest you do an authorization trace to ensure that the user has all the necessary authorizations.
    and on the second part - yes the user needs to have credentials for the system that you trying to access
    Ingo

  • Printing the datas through Crystal Report from Java

    How can I Print the datas through Crystal Report from java?

    How can I Print the datas through Crystal Report from
    java?
    What the hell are "the datas"?
    Jesus, I can understand this is a shrinking planet, Global community, and all that happy horse pucky. Typos or small grammar errors are no big deal, I make them all the time. But when I have to spend more time interpretting the question than figuring out the answer, it drives me crazy.

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • How To Start Forms and Reports From Start Command

    Hi All,
    How to start Oracle Forms and Reports in Oracle8i My OS is Windows 2000.Please tell the procedure to get into forms and reports.
    Otherwise we have to install other software for Forms and Reports.
    Thanks
    Sujan

    Sujan,
    what does the database have to do with starting Forms and Reports ? If you are on Wondows2000 then navigate to the \bin directory if the Oracle Home you installed Oracle9iDS to. Type ifbld90 for Forms and rwbuilder for Reports design environment.
    If your ability to start Forms and Reports from the command line is your only exit criteria in evaluating software for a project , how far will you go with it?
    Frank

Maybe you are looking for