Copy express and user defined windows

Hi All,
I´m using CopyExpress to copy a company A to B with a certain selection criteria.
The content of the user defined windows are in the target company (B) and when adding an entry into the Journal Entry certain fields are populated automatically when saving the entry.
That´s how we expect the system to behave.
But for a certain document serie these same fields are not populated automatically.
Someone has encountered some issues regarging the Journal Entry and Copy Express?
Thanks for your help

The data copied by Copy Express may not be identical. For example, the account code will be different if you use segregated accounts. Some of other internal codes may not be the same either.
Thanks,
Gordon

Similar Messages

LSMW Fixed, Translations and User defined routines??????

Hi Experts,
I have another questions here.. I can see the step called Maintain Fixed values, Translation and User defined routines in LSM Workbench, why is it used, when its used and where???
If its possible can someone give me examples for this particular step...
Well, I wanted to award some points to experts like RICH, CHRISTIAN AND ZHENGLIU, but my screen is not showing the points radio button. But I will award, as soon as possible.
Thanks and waiting for your replies.
Regards,
-Ken C

Also check http://help.sap.com/saphelp_erp2005/helpdata/en/7a/5e3d38faba11d1b40f006094b944c8/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/7a/5e3d38faba11d1b40f006094b944c8/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/7a/5e3d38faba11d1b40f006094b944c8/frameset.htm
Hope you'll find your answers..
Cheers !!!

Value mapping, interface mapping, standard funtions and user defined functi

I like have more information abt live scenario's use of value mapping, interface mapping, standard funtions and user defined functions.
How to create user defined funtions and how to use it in XI?
thanks in advance
shiva

Hi,
Interface mappings register your mapping program for an interface pair in the Integration Repository. If you require a mapping at runtime, it is sufficient to select the interface mapping for the interface pair at configuration time .The Integration Server uses the interface mapping to identify associated mapping programs for request messages, response messages, fault messages, or all three.
Features
Executing Multiple Mapping Programs for One DirectionBy using an interface mapping you can execute multiple mapping programs consecutively for the transformation of a request or response message. In such cases, an interface mapping comprises multiple steps for which the following applies:
●     The steps are executed in the sequence specified (from top to bottom). The result of the mapping program from the previous step is forwarded to the mapping program of the subsequent step.
●     Each step can reference a mapping program that executes a 1:1, 1:n, n:1, or an m:n transformation. In the case of multi-mappings (1:n, n:1, or m:n), the previous step must create the same number of messages that the subsequent step expects.
●     Multi-mappings use one envelope to put all messages in one structure. If one of the steps references a multi-mapping program, all subsequent steps must use the same envelope.
The mapping for a request message comprises two message mapping programs: one 1:1 transformation and one 1:n transformation. Since the latter message mapping uses the multi-mapping envelope for both the target message and the source message, the message mapping for the 1:1 transformation must also create a transformation result with a multi-mapping envelope.
You do not strictly need to divide up one direction of the whole mapping into different steps. However, this enables all the message formats in one system landscape to be mapped to a central message format, for example. This results in less mapping programs being required because you no longer need to be able to map all the different message formats to each other
Activities
       1.      Create a message mapping on the design maintenance screen of the Integration Builder (see also: Creating an Object).
You can also create multiple interface mappings for the same interface pair.
       2.      Enter the source and target interfaces that require a mapping of the request message, the response message, the fault message, or all three, in the table of the same name. The following restrictions apply:
○     If you want to use the interface mapping in a transformation step in an integration process, you must only specify abstract message interfaces. Furthermore, all objects (integration process, interface mapping, and all objects that reference the interface mapping) must be in the same software component version. If you want to reference objects from underlying software component versions, you must access the objects from the Basis Objects branch (in the navigation tree or using an input help).
○     If you want to map multiple messages to each other by using a multi-mapping, you can only specify asynchronous interfaces (for further restrictions, see: Multi-Mappings). If any message interfaces are missing, you can also create them by using the function Create New Object ().
If the interface cannot be imported or cannot be created in the Integration Repository (in the case of an external adapter, for example), you must enter the interface names manually. However, it is not possible to check the technical name in this case.
       3.      To import the properties of the interfaces, choose Read Interfaces. The table in the lower area displays tab pages for the request message, response message, and if available, for the fault message, for each mode of the interfaces (either synchronous or asynchronous).
       4.      To develop an external mapping program, export the XSD schema of the respective request or response message as a zip file after you have imported the interfaces. The zip file can contain multiple schema files that reference each other, for example in a multi-mapping. In this case, the schema with the global message element has the name MainSchema.
       5.      To reference a mapping program for the respective message, you have the following options:
○     Select an existing mapping program from the Integration Repository by using the input help (). If this is a message mapping, the default setting of the input help only displays those message mappings that are found using the source and target message in the Integration Repository (in multi-mappings, the first source and target messages are used as the search criteria). However, you can also display any number of message mappings, for example, because you are constructing a mapping from several mapping programs with intermediate instances which have no message types.
○     You can create message mappings directly from the interface mapping. To do this, select the mapping type Message Mapping in the Type column. Position the cursor in the Name column and choose the function Create New Message Mapping () in the Mapping Program frame. The Integration Builder copies the specifications of the messages and their occurrence directly from the interface mapping.
An interface mapping can only reference mapping programs that belong to the same or an underlying software component version of the interface mapping. This ensures that the mapping program can be shipped together with the interface mapping (see: Software Logistics).
       6.      If it is not a mapping for a fault message, you can execute multiple mapping programs in succession for request and response messages:
○     To insert an additional line for a mapping program, choose .
○     To delete the registration for a mapping program, choose .
At runtime, the mapping programs are executed from top to bottom.
       7.      Save the interface mapping.
Regards
Aashish Sinha
PS : reward points if helpful

"Nested and User Defined Exceptions" in Java...Theory and Code Required...?

Can anyone provide theoretical information with example code for "Nested Exceptions" and "User Defined Exceptions"..? Or it would be equally good, if someone can provide links for further reading on the said topic.

User Defined Exceptions are the same as exceptions in the JDK, but are defined by a "User"
I suggest you look at the JDK for examples.
A Nested Exception is an Exception with a different exception set as the cause.
This pages covers more than you need to know with examples. [http://java.sun.com/javase/6/docs/api/java/lang/Throwable.html]

Field to distinguish standard users and user defined users

Hi,
   I want to distinguish the standard users and user defined users for getting one report to filter what are all the standard users in sap like sap*.....I dont know how to split the standard users and users created by us.is there any way to distinguish both the users
                                           Thanks in advance

>
J@Y wrote:
> In table USR04, MODBE is the Last changed by check if its your Zbatch, or any of your basis guyz initials on it. if not its standard created by SAP.
Nice try - but on my system SAP* has a MODBE of one of our basis people.

User Defined Windows

Hi Friends,
Is there any way to add a User-defined to the menu so that it will be easier for the users to select them.
Currently i am having lot of user-defined windows in SBO since i am using lot of quite a lot of add-ons which puts it's own UDTs.
Thanks & Regards
Shiva

Hi
I mean u want to add a menu in main menu bar....then my answer is NO
U can add under MODULE by help of SDK or by development
else u can make shortcut thru"MY Menu" Tab
Kevin

Using copy express for user settings

I am in the process of setting up 10 company databases on one system. The same users will have access to all of the databases (over 100 users). We have laboriously entered form settings for every possible form under the manager user in one of the databases. We have a script to copy manager's settings to other users.
What I need to do is copy manager's settings from the first database to each of the others. Copy express has an option to copy display settings, and I have attempted to do so. But I get a message saying that the record already exists in the target database. I know that manager has never changed any form settings in the other databases, so I don't know what record it is referring to.
Can anyone help with this? Thanks.

Hi!
SAP B1 has the new feature of copy one user form settings to another. For B cluster it is 2007B PL 15.
Please refer SAP Software Center info and update to required patch.

Tabbed navigation,Theme change and User define templates problem

Hi,
·     I have created an application in which I have defined many page,page regions,buttons,forms templates myself.
·     The end user has now requested for a tabbed look and feel for the same and that too in a different theme (color red)
·     However, inclusion of tabs to the application plus a change in the theme color (to red) in this case causes all user defined templates to behave erratically.
·     I guess these templates will have to be redefined in this new theme. I tried to copy some of these today but got weird results.
Without all these templates in place the look and feel of the application will not be as usual.
·     Also,I had posted a thread on the APEX forums concerning tabs and have received information that each page in the application has to be manually added to the tab set in a situation such as this.This will really increase the time taken to achieve the desired application navigation.
I would appreciate some good advice as how to get this appliction navigation running smoothly in a tabbed format in the least possible time.
Thanks and Regards,
Priya Jetley

Hello,
I would have a look at the Lists in Shared Components which allow you to create Tabs as well.
They are a bit more flexible.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

Juniper MX Regular expressions and user permissions ACS 5.4

Hi everyone!
Im having some trouble with regular expressions and permissions on our Juniper MX routers through ACS 5.4, and i would like some insight/help/poitners!!
We have a team of engineers that should only have read only permissions (important: show configuration) and also be able to just change the description on interfaces.
Thus far with the following regular expressions set for the shell profile they are going through i have managed the above, however the problem is when an engineer inputs "Show configuration", only the interfaces descriptions configuration is shown! The rest of the configuration will not be printed.
deny-commands1=.*.
allow-commands1=configure
deny-configuration1=.*.
allow-commands2=interfaces .*. description .*$
allow-configuration1=interfaces .*. description .*$
allow-commands2=show configuration.*
allow-commands3=show configuration
(some of these regex i know that are not needed, i was just playing around to check everything before posting)
Any pointers as to why or how to resolve this?
example output with the above:
show configuration
## Last commit: 2014-01-09 09:34:44 EET by someone
interfaces {
    xe-0/0/0 {
    xe-0/0/1 {
        description xxxx;
    xe-0/1/0 {
        description xxxx;
    xe-0/1/1 {
        description xxxx;
    xe-0/2/0 {
        disable;
    xe-0/2/1 {
        description xxxx;
    xe-0/3/0 {
        description xxxx;
    xe-0/3/1 {
        description xxxx;
    ae0 {
        description "xxxx";
    ae1 {
        description xxxx;
    demux0 {
    lo0 {
{master}
Thanks in advance!
Spyros

You are absolutely right!! I was doing research online after posting the above. The correct RADIUS attribute to use is actually CVPN3000/ASA/PIX7.x-Group-Based-Address-Pools. Then create the pool in ASA, and call that pool's name in ACS under that RADIUS attribute. Someone explained this perfectly in this community before. Much appreciate your answer!
Here's from another post last year:
ACS 5 does not have the feature of IP pools. Logically its always good to setup pools locally on vpn server and if you want user to pick ip from specific local pool you can configure acs to push that attribute.
On ACS Go to > Policy Elements -> Network Access ->   Authorization Profiles -> Create ->
Name of the Policy ->Dictionary Type: Radius-Cisco VPN 3000/ASA/PIX7.x
Attribute Type : CVPN3000/ASA/PIX7.x-Group-Based-Address-Pools
Attribute Type: String
Attribute Value : Static MYPOOL (Name of the Pool which is defined on the ASA)
Access Policies ->Default Network Access -> Authorization -> Create -> Under result section call the Authorization p

Authorization for User Table (User-Defined Windows)

Hi Experts
I want to restrict access for specific users to User Defined Tables. Is this possible?
Regards
Nabeel

You can do it by using Additional Authorization Creator Winow
1. Open Additional Authorization Creator Window.
2. Click on 'Add Same Level ' Button
3. On the Right side window, Type in
Authorization ID = 'Activity Subject'
Name = 'Activity Subject'
Option = 'Full/ ReadOnly/ No Authorization"
4. In form ID, press 'Edit Butto' and type Form Id of the UDT
5. press OK to close this window
6. Open 'General Authorization' Screen
7. On the Right Side, navigate 'User Authorization'
8. Scroll down ''Activity Subject' and select the user and Set appropriate authorization('Full/ ReadOnly/ No Authorization")
9. Now Log off and Login with user.
You can see the authorization in effect.
Similarly you can do for any window which are missing in 'General Authorization'

Problem with ALV and user defined selection screen. please help!

Hi Experts,
I have program which has a user defined selection screen 9001. On executing the selection screen i call a ALV using resuse_alv_grid function module.
What problem I am facing is that when I press back button from ALV page it goes to the se38 editor instead of selection screen.
How to resolve this?
Thanks
Gopal

Hi,
This might be due to LEAVE TO TRANSACTION statement. You might be running the program from SE38. Try to run the program using Z-TCode assigned to it.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was edited by: Bharat Reddy V

Query SQL with variables Parameters and user defined tables

Hi everyone
I got a problem about Query SQL
[dbo].[@CSOURCE] is a user defined table
select * from [dbo].[@CSOURCE]
you can get the result in following
code name
T01 newspaper
T02 TV
T03 radio
T04 friends
when I execute the following SQL Statements ，I get an error
SELECT T0.CardCode , 0.CardName ,T1.Name ,T2.SONumber
FROM OCRD T0 LEFT JOIN [dbo].[@CSOURCE] T1 ON T0.U_CSOURCE = T1.Code
 LEFT JOIN (SELECT T0.CardCode ,COUNT(T0.DocNum)SONumber
 FROM ODLN T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
 WHERE T1.GroupCode =111
 AND (T0.DocDate >=[%0] or [%0]='')
 AND (T0.DocDate <=[%1] or [%1]='')
 GROUP BY T0.CardCode) T2 ON T0.CardCode=T2.CardCode
WHERE T0.GroupCode =111
and T0.CardType ='C
Is there anyone can correct it for me
thank you very much
Edited by: Li Mishan on Jul 17, 2008 9:36 AM
Edited by: Li Mishan on Jul 17, 2008 9:40 AM

I am sorry .It is just a mistake of my typewriting.
The following is the whole SQL
dbo.@CSOURCE is a user table.It's content is
code name
T01 newspaper
T02 TV
T03 radio
T04 friends
declare @m int
declare @FromDate DateTime
declare @ToDate DateTime
set @m=(SELECT count(*) FROM ORDR T0 WHERE T0.DocDate >=[%0] and T0.DocDate <=[%1])
set @FromDate=[%0]
set @ToDate=[%1]
/*****************If I do not connect user tavble dbo.@CSOURCE ，I will succed *****************************************************/
SELECT T0.CardCode ,T0.CardName ,T2.SONumber,T1.Name
FROM OCRD T0 LEFT JOIN [dbo].[@CSOURCE] T1 ON T0.U_CSOURCE = T1.Code
 LEFT JOIN (
 SELECT T0.CardCode ,COUNT(T0.DocNum)SONumber FROM ODLN T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
 WHERE T1.GroupCode =111
 AND (T0.DocDate >=@FromDate or @FromDate='')
 AND (T0.DocDate <=@ToDate or @ToDate ='')
GROUP BY T0.CardCode
 ) T2 ON T0.CardCode=T2.CardCode
WHERE T0.GroupCode =111
and T0.CardType ='C'
when I excute the SQL, It return a error , whith says the column name '%0' is invalid.
If I delete "set @m=(SELECT count(*) FROM ORDR T0 WHERE T0.DocDate >=[%0] and T0.DocDate <=[%1])"
and rewrite "set @FromDate='2008.05.01' set @ToDate='2008.07.01' "
It Shows the following results
 CardCode CardName SONumber name
1 000070 Deng. Jiahua 1 newspaper
2 000293 LU .Weijuan 1 radio
3 000313 Xie .Jifang 3 TV
Edited by: Li Mishan on Jul 18, 2008 4:42 AM
Edited by: Li Mishan on Jul 18, 2008 4:43 AM
Edited by: Li Mishan on Jul 18, 2008 5:43 AM

User Defined field and User defined values.

Curently testing this in the demo database before rolling it out to a customer.
I added a user defined field to my item master data base called Lengthcm of type Amount.
I have created a query:
SELECT u_lengthcm = CASE
                  WHEN $[oitm.blen1unit] = 5 THEN $[oitm.blength1] * 2.54
                  WHEN $[oitm.blen1unit] = 6 THEN $[oitm.blength1] * 2.54 * 12
                  ELSE 0 END
Length unit 5 is inches and length unit 6 is feet.
In Item Maintenance then I create a user defined value for the lengthcm field linked to the query and set to auto-update when the blength1 field changes.
This works perfectly for 1 inch through 9 inches (1" through 9") and fills in the centimeter value. When I put in a value in feet (1', 2'), it does nothing and if I put in any value of 10" or greater gives an error message:
[Microsoft][SQL Server Native Client 10.0][SQL Server] Arithmetic overflow error
converting nvarchar to data type numeric. 'Received Alerts' (OAIB).
Checking database structure back end, blen1unit is of type small int, blength1 is numeric of size 19, 6 and so is my lengthcm field.
Edited by: Danielle Ostach on Mar 18, 2011 8:18 PM
Edited by: Danielle Ostach on Mar 18, 2011 8:19 PM
Edited by: Danielle Ostach on Mar 18, 2011 8:20 PM
Edited by: Danielle Ostach on Mar 18, 2011 8:21 PM
Edited by: Danielle Ostach on Mar 18, 2011 8:21 PM

Hi Danielle ,
Try this...
SELECT u_lengthcm = CASE
                  WHEN $[oitm.blen1unit] = 5 THEN (cast(($[oitm.blen1unit]) as decimal(19,6))) * 2.54
                  WHEN $[oitm.blen1unit] = 6 THEN (cast(($[oitm.blen1unit]) as decimal(19,6))) * 2.54 * 12
                  ELSE 0 END
Regards,
Sachin

PROMPT(SELECTINPUT, ...) and user defined dimensions

Hi,
I created a custom package that should enable the user to select members of the TIME, Account and Category dimensions and also members of some user defined dimension called "Costcent". After that, a scriptlogic file should be called.
I tried:
1)
PROMPT(SELECTINPUT, ... %TIME_DIM%%ACCOUNT_DIM%%CATEGORY_DIM%"Costcenter")
which doesn't work, bc. compiler doesnt seem to like %var%"fixedexpression"
2)
PROMPT(SELECTINPUT, ... "Costcenter")
PROMPT(SELECTINPUT, ... %TIME_DIM%%ACCOUNT_DIM%%CATEGORY_DIM%)
running the package only allows to select a costcenter, 2nd prompt ignored?
3) similar, the other way round.
Any ideas?
Moreover, I need to be able to access the selection of the Costcenter members in the script logic. For the std. dimensions, there is %TIME_SET%, %CATEGORY_SET% etc.I am using successfully, but how to define or access the set (or list) for the selected members of user-def. "CostCent" dimension ?
Thanks for your help!

Clear Bug: Using the DataManager to modify the .dtsx file sometimes modifies the prompt lines in an unpredictable way... So the file that is safed doesn't get the content it is intended to get... - Guess "this should never happen", but it is...

XmlBeans and user defined interface...Does it work within WLW?

I'm attempting to build an xmlbean with a user defined interface that our xmlbean ( derived from our xsd) will implement.
 
I have tried this using the samples from the Apache Xmlbean project ( v1.0.4 ) and the BEA version; both have worked.
 
I was wondering if anyone has attempted this and managed to achieve success using this via the WLW build process.
 
I have removed the reference to the our xmlbean within the handler and used the com.bea.xml.XmlBean reference. This worked with both apache and BEA tests. This also reduces the need for a circular build process ( ugly at best! )
 
I get the following error message:
 

ERROR: localInfo.xsdconfig:35: Interface 'com.extension.weatherExtension' not found.
ERROR: localInfo.xsdconfig:35: Interface 'com.extension.weatherExtensionHandler' not found.

 
It woud seem that i am missing the java classes fromthe classpath....however i echo out the classpath during the build and my compiled jar is there.
 
Any thoughts?
 
Thanks

Andy,
Let me see if I can help.
Groups A and B and assigned to group C. That means members of group A are also members of group C. Members of group B are also members of group C.
However members of group C are only members of group C. So any roles you assign to group A apply only to group A. Likewise with B, roles assigned to group B apply only to group B.
Now, assign a role to group C and members of groups A, B, and C have that role. So assign general roles to group C and more specific ones to groups A and B.
C-role 1
A B-role 2
Carl is assigned to group C so he has role 1.
Brenda is assigned to group B so she has roles 1 and 2.
Does this help?
-Michael
Message was edited by: Michael Shea

Copy express and user defined windows

Similar Messages

Maybe you are looking for