Copy Failed "Error of Type -1402"
I upgraded to Tiger a few months ago. I am trying to reinstall some old programs from the MAC OS X 10.3.3 installation CD. However, specifically the applications. However, when I try and do this I get the following message and my cd spits out.
Copy Failed:
An error of type -1402 occurred while copying.
My guess is that I am trying to install applications from the 10.3.3 cd and should use the 10.3.4 cd? But, I need the older version applications. Is there any way to get these off my cd?
Thanks.
The error is:
errFSBadForkName = -1402, /* Fork name parameter is bad */
Use Pacifist to extract the installers. More than likely, Panther apps won't work with Tiger, but that's something for you to figure out.
Similar Messages
-
Export for system copy fails - Error 9 (Bad file number)
Hello all,
I am attempting to perform the export phase for a hetergenous system copy on our BI system (BI 7.0 - NW2004s). This system runs on HP-UX 11.11 using Oracle 10.2.0.2 and will be migrated to Windows Server 2003 and MS SQL Server 2005, once the export is complete.
While running sapinst to export the data from the source system, there are several input dialog screens that are skipped, which means I am not able to enter all the paramters used for the export. After seeing this behavior from sapinst, I reviewed the sapinst.log and sapinst_dev.log files and find the warning/error "System call failed. Error 9 (Bad file number)". I have included a portion of these files below.
I have reviewed notes 546006 and 583861, but these seem to refer to an Oracle error ORA-27121, but I am not receiving any Oracle errors in sapinst.log or the Oracle alert log. I have looked for possible permission or ownership problems with any of the SAP or Oracle files, but have not found any that were incorrect. Also, these errors do not specify which file sapinst is having problems with, so I do not have a specific file or area to check.
If anyone has seen something similar to this and has any suggestions, I would greatly appreciate any help.
sapinst.log details:
INFO 2009-02-14 15:15:51.67
Execute step collect of component |NW_Export|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind
|ind|ind|0|0
INFO 2009-02-14 15:15:52.737
Account bwpadm already exists.
WARNING 2009-02-14 15:15:52.747
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.757
Account 0 already exists.
WARNING 2009-02-14 15:15:52.777
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:15:52.777
Account 200 already exists.
WARNING 2009-02-14 15:15:52.827
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
INFO 2009-02-14 15:16:04.937
Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/EXP/CENTRAL/AS/EXP/ypcat.log.
INFO 2009-02-14 15:16:05.007
Output of ypcat passwd.byname is written to the logfile ypcat.log.
sapinst_dev.log details:
TRACE 2009-02-14 15:15:52.737
2009-02-14 15:15:52.743 NW._getSAPMount() done: /sapmnt
INFO 2009-02-14 15:15:52.737 [syuxcaccmg.cpp:227]
bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
Account bwpadm already exists.
TRACE 2009-02-14 15:15:52.747 [syuxcuser.cpp:1943]
CSyUserImpl_getOsInfos(ILogBook *m_logBook, iastring sName, iastring sID, tSyUserInfo& msUserinfo)
getspnam(bwpadm) returned NULL.
WARNING 2009-02-14 15:15:52.747 [syxxsyshlp.cpp:78]
syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
System call failed. Error 9 (Bad file number) in execution of system call 'getgrent' with parameter (), line (292) in file (syuxcuse
r.cpp).
Regards,
Rusty RobbinsHello Peter,
Thanks for the reply. I did confirm the points you made, and have the details below.
1. check filesystem, if you have enough space, especially /tmp
All filesystems have available space, and /tmp has 310 MB available, before the start of sapinst.
2. check again alert log, trace log for Oracle,
I could not find any errors in the alert_SID.log or any unusual trace files.
3. How did you run sapinst? Are you using "root" account.
I am running sapinst as user root and I am following all the recomendations in the system copy guide (at least as far as I can tell. ;p )
We have four BI systems in this landscape, and the other three have migrated successfully. The procedure I am using, is the same as for the other 3 systems and uses the same SAP media directory that was used on the other systems.
One other item that may be part of my problem here, is that this system is the production system, and was originally installed as a high-availability system, using HP-UX Service Guard for clustering. Currently, this system does not have fail-over enabled, but of course the cluster is still intact. One required piece of the Service Guard enviornment is the use of a virtual hostname. This seems to resolve successfully by sapinst, as I see the correct (virtual) hostname referenced several times. While this is a clustered system (for fail-over purposes), the CI and DB are installed on the same host. So it is not a distributed system, and if failover had been initiated, it would fail both the CI and DB instance, which is the same and only SAP instance.
This did raise one question in my mind, however. I am attempting to extract this using the following menu path within sapinst.
SAP NetWeaver 7.0 Support Release 3 --> Software Life-Cycle Options --> System Copy --> Oracle --> Source System Export --> Central System --> Based on AS ABAP and AS Java
Since this does use Service Guard, but is not a distributed system, should I be using a different path in the sapinst tree, for the export? I have only performed a migration using the above path, so I am not familar with the detailf of the other types, such as High-Availabitly or Distributed-System.
Regards,
Rusty -
We are using TINA backup solution and windows 2003 backup is failling with VSS error.
For testing purpose we initiate a system state backup (or any file backup) with the help of windows 2003 ntbackup.exe and found it is failing with below error.
Backup error report.
Backup Status
Operation: Backup
Active backup destination: File
Media name: "Backup.bkf created 28/05/2014 at 06:34"
Volume shadow copy creation: Attempt 1.
Error returned while creating the volume shadow copy:0x8004230f.
Error returned while creating the volume shadow copy:8004230f
Aborting Backup.
The operation did not successfully complete.
We check event viewer and found below error event.
Event Type:
Error
Event Source:
VSS
Event Category:
None
Event ID:
12293
Date:
28/05/2014
Time:
05:48:10
User:
N/A
Computer:
CQ329TOS
Description:
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details Cannot ask provider {b5946137-7b9f-4925-af80-51abd60b20d5} if
volume is supported. [0x8000ffff] [hr = 0x8000ffff].Resolution:
After getting this error we check Shadow Copy provider and writer health and fond it is fine.
To get shadow copy providers details use below command.
Command: vssadmin list providers
Command output
C:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
To get shadow copy writers health
Command: vssadmin list writers
Command Output.
C:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {333e02cd-d9ec-43c8-9b45-39691ad1b351}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {800877a5-e13d-47a3-8f99-ebd4d3b3fd12}
State: [1] Stable
Last error: No error
Writer name: 'MSDEWriter'
Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
Writer Instance Id: {63400aa0-a17f-4121-9483-1cd226f03238}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e13cb72b-84fa-4c86-86d8-48f523aafc9a}
State: [1] Stable
Last error: No error
Writer name: 'Event Log Writer'
Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
Writer Instance Id: {ce63b3a0-e038-4e56-9d07-929f256639de}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {008e8714-ed6d-4288-81ce-4b0b1ec41294}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {e22a8953-a52c-4a76-bec0-8773122cbff8}
State: [1] Stable
Last error: No error
Next I check Shadow Copies details from volume properties (right click on C or other drive then select properties then click on Shadow Copies Tab) and found it is showing the same error code..
From this error it is clear that the issue is inside the registry hive and due to junk hive shadow copies services not able to working properly.
For me the server have two disk we check disk signature at MBR and found the disk signature was.
Signature disk 0 : 9351912b
Signature disk 0 : FDFBE035
But at registry we found lot of nonexistance signature. Which indicate lot of junk valu inside registry.
Now how can we resolve this issue?
It is very simple just delete the registry key “volume” (registry key “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\STORAGE\Volume”) and reboot the server it will “Volume” registry hive automatically.
Note:
When you remove registry key it is showing error unable to delete, then please right click on it select permission then take ownership and assign full permission to your login account.
Please be careful when you delete registry key because system can fully crashed if you delete or modify wrong registry key.
Your can take a backup of the registry key by exporting. -
Error #1034 Type Coercion fail with registerClassAlias and nested Vectors
I'm attempting to use flash.net.registerClassAlias and ByteArray.writeObject in order to serialize/deserialize data with static type information. It works as you'd expect in the general case but I've run into problems with some nested Vectors that I don't understand. Hopefully someone can point out if I'm just missing something.
For what I understand, we must register both the scalar types and a one-deep specification of a Vector for that scalar type in order to use nested Vectors. For example:
flash.net.registerClassAlias("TestStructureInner", TestStructureInner);
flash.net.registerClassAlias("VectorTestInner", Vector.<TestStructureInner> as Class);
This should allow us to read/write objects of type TestStructureInner, Vector.<TestStructureInner>, and Vector.<Vector.<TestStructureInner>> into ByteArrays. And in general it seems to work.
Attached though is a simplified test case that fails, however. The first time we deserialize the data it works. The subsequent time, however, we encounter the following runtime error #1034.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fcb9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fbc9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fdd1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fce1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fbf1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fec1 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fad9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304fa61 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304f9e9 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
TypeError: Error #1034: Type Coercion failed: cannot convert __AS3__.vec::Vector.<Object>@304f971 to __AS3__.vec.Vector.<__AS3__.vec::Vector.<Test0.as$30::TestStructureInner>>.
Re-registering the class aliases again via flash.net.registerClassAlias works in this test case but isn't 100% for our actual application (I'm reticent to even mention it but it seems relevant). Is there a step I'm missing here? Any light shed would be appreciated.
// mxmlc -debug Test0.as
package
import Base64; // http://code.google.com/p/jpauclair-blog/source/browse/trunk/Experiment/Base64/src/Base64.a s
import flash.net.registerClassAlias;
import flash.events.Event;
import flash.utils.ByteArray;
import flash.display.Sprite;
import flash.display.Stage;
import flash.system.System;
public class Test0 extends Sprite
static private const OPERATION_SERIALIZE:uint = 0;
static private const OPERATION_DESERIALIZE_AND_FAIL:uint = 1;
static private const OPERATION_DESERIALIZE_AND_SUCCEED:uint = 2;
static private var staticStage:Stage;
private var bar:Vector.<TestStructure>;
* common functions
static private function registerClassAliases():void
flash.net.registerClassAlias("TestStructureInner", TestStructureInner);
flash.net.registerClassAlias("VectorTestInner", Vector.<TestStructureInner> as Class);
flash.net.registerClassAlias("TestStructure", TestStructure);
static public function staticDeserialize():Object
var byteArray:ByteArray = Base64.decode("EBUAG1Rlc3RTdHJ1Y3R1cmUKEwAHZm9vEAEAH1ZlY3RvclRlc3RJbm5lcgoBEAEABAoBEAEABA oBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABAoBEAEABA==");
byteArray.position = 0;
return byteArray.readObject();
public function Test0():void
registerClassAliases();
// Switching operation between the constants demonstrates failure/success in a couple of different ways.
// SERIALIZE is just used to prepare the base64 string for subsequent tests.
var operation:int = OPERATION_SERIALIZE_AND_FAIL;
if (operation == OPERATION_SERIALIZE)
trace("Serializing");
// outputs base64 string for subsequent tests
serialize();
else if (operation == OPERATION_DESERIALIZE_AND_FAIL)
trace("Fail case");
// perform successful one deserialization, then one failing one.
deserializeOnceThenFail();
else if (operation == OPERATION_DESERIALIZE_AND_SUCCEED)
trace("Success via re-registration");
// perform successful one deserialization, then another successful one.
deserializeOnceThenSucceed();
* serialize
// outputs base64 string we use for subsequent tests.
private function serialize():void
var baz:Vector.<TestStructure> = new Vector.<TestStructure>;
for (var i:int=0; i<10; ++i)
baz.push(new TestStructure);
var byteArray:ByteArray = new ByteArray;
byteArray.writeObject(baz);
trace(Base64.encode(byteArray));
* deserializeOnceThenFail
// perform successful one deserialization, then one failing one.
public function deserializeOnceThenFail():void
// save stage
staticStage = stage;
// the first deserialize will proceed without error.
staticDeserialize();
trace("Successful deserialize");
// add an event listener in order to invoke error on subsequent frame
stage.addEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenFail);
// remove event listener and invoke again.
static private function doEnterFrameOnceThenFail(e:Event):void
staticStage.removeEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenFail);
staticDeserialize();
trace("unsuccessful deserialize2");
* deserializeOnceThenSucceed
* Here, we re-call flash.net.registerClassAlias on all our class types when running.
// perform successful one deserialization, then one failing one.
public function deserializeOnceThenSucceed():void
// save stage
staticStage = stage;
// the first deserialize will proceed without error.
staticDeserialize();
trace("Successful deserialize");
// add an event listener in order to invoke error on subsequent frame
stage.addEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenSucceed);
// remove event listener and invoke again.
static private function doEnterFrameOnceThenSucceed(e:Event):void
staticStage.removeEventListener(Event.ENTER_FRAME, doEnterFrameOnceThenSucceed);
registerClassAliases();
staticDeserialize();
trace("successful deserialize2");
internal class TestStructureInner
public var value:int;
internal class TestStructure
public var foo:Vector.<Vector.<TestStructureInner>> = new Vector.<Vector.<TestStructureInner>>;The error would imply that ImageAssetEvent does not inherit
DisplayEvent. Either modify the inheritance chain or listen for a
basic Event object (flash.events.Event) and cast inside the
function. -
I'm a student I have a final project want to deliver it after two days.
I'm making a drag and drop game, I watched a tutorial to do that.
But after ending coding I faced a weird error!
I've I checked that my code is the same as the code in the tutorial.
This is the Debug error report:
Attempting to launch and connect to Player using URL E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf
[SWF] E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf - 87403 bytes after decompression
TypeError: Error #1034: Type Coercion failed: cannot convert paper1$ to DragDrop.
at Targets()[E:\FL\ActionScript\Drag and Drop Project\Targets.as:23]
My `.fla` File is containing 12 Objects to drag and another 12 Objects to drop on it.
The idea here is when drop the Object on the target the Object will become invisible and the target become visible (in `.fla` file `target alpha = 0`).
I made two classes:
DragDrop.as : for the objects that I'm going to drag.
Targets.as : for the targets that I'm going to drop Objects on it.
Note: match function is to animate "GameOver" MovieClip When complete the game.
DragDrop.as:
package
import flash.display.*;
import flash.events.*;
public class DragDrop extends Sprite
var origX:Number;
var origY:Number;
var target:DisplayObject;
public function DragDrop()
// constructor code
origX = x;
origY = y;
addEventListener(MouseEvent.MOUSE_DOWN, drag);
buttonMode = true;
function drag(evt:MouseEvent):void
stage.addEventListener(MouseEvent.MOUSE_UP, drop);
startDrag();
parent.addChild(this);
function drop(evt:MouseEvent):void
stage.removeEventListener(MouseEvent.MOUSE_UP, drop);
stopDrag();
if(hitTestObject(target))
visible = false;
target.alpha = 1;
Object(parent).match();
x = origX;
y = origY;
Targets.as:
package
import flash.display.*;
import flash.events.*;
public class Targets extends MovieClip
var dragdrops:Array;
var numOfMatches:uint = 0;
var speed:Number = 25;
public function Targets()
// constructor code
dragdrops = [paper1,paper2,paper3,paper4,paper5,paper6,
paper7,paper8,paper9,paper10,paper11,paper12,];
var currentObject:DragDrop;
for(var i:uint = 0; i < dragdrops.length; i++)
currentObject = dragdrops[i];
currentObject.target = getChildByName(currentObject.name + "_target");
public function match():void
numOfMatches++;
if(numOfMatches == dragdrops.length)
win.addEventListener(Event.ENTER_FRAME, winGame);
function winGame(event:Event):void
win.y -= speed;
if(win.y <= 0)
win.y = 0;
win.removeEventListener(Event.ENTER_FRAME, winGame);
win.addEventListener(MouseEvent.CLICK, clickWin);
function clickWin(event:MouseEvent):void
win.removeEventListener(MouseEvent.CLICK, clickWin);
win.addEventListener(Event.ENTER_FRAME, animateDown);
var currentObject:DragDrop;
for(var i:uint = 0; i < dragdrops.length; i++)
currentObject = dragdrops[i];
getChildByName(currentObject.name + "_target").alpha = 0;
currentObject.visible = true;
numOfMatches = 0;
addChild(win);
function animateDown(event:Event):void
win.y += speed;
if(win.y >= stage.stageHeight)
win.y = stage.stageHeight;
win.removeEventListener(Event.ENTER_FRAME, animateDown);
...ThanksThank you very much for replying.
- dragdrops represents: the dragable objects.
- Targets obtaining the dropable objects by hitTestObject, then the dropable objects visible is turned to false, & the target visible turned to true.
Dragable objects is a 12 elements all of them have an instance names: paper1....paper12.
When I focused to the project I noticed that I forget to give the dragable objects an instance names!
after making the instance names to them, a new error occures:
E:\FL\ActionScript\Drag and Drop Project\Targets.as, Line 11
1046: Type was not found or was not a compile-time constant: paper1.
This error is continuing to paper2, paper3.....paper12 !
Please download my project, I must deliver it to my college in 24/12. I will never forget your favor. thanks.
https://www.dropbox.com/s/8mdg5w17vvryzso/Drag%20and%20Drop%20Project.rar | 715KB -
Error #1034: Type Coercion failed: Error in FocusManager
Hi,
I am using ActionScript 3.0.
Here I want to setFocus on a DisplayObject(flash.display.DisplayObject).
I tried :
//var dispObject:DisplayObject;
//dispObject = code here to get displayObject;//valid DisplayObject got
var focusManager1:FocusManager = dispObject["focusManager"];
var component:IFocusManagerComponent = dispObject as IFocusManagerComponent;
if(focusManager1 != null && component != null)
focusManager1.setFocus(component);
But I am getting : Error #1034: Type Coercion failed: cannot convert mx.managers::FocusManager@3881e41 to mx.managers.FocusManager.
This is at line : var focusManager1:FocusManager = dispObject["focusManager"];
The same code would work if I use mx.core.UIComponent instead of DisplayObject, I guess.
But I am not able to convert DisplayObject to UIComponent (invalid cast).
Can someone please help me.
Thanks,
Pradeep.mx.managers.FocusManager is for Flex Components and does not work with any other objects.
In order to set focus on an InteractiveObject (you cannot set focus on a DisplayObject which is not an InteractiveObject) use stage.focus. -
I have a Pavilion dm4 and it is telling me that my Hard Drive is going to fail.
The original operating system was Windows 7 (64bit), but I 'upgraded' to Windows 8
I have backed up everything on an external hard drive
I purchased a new hard drive: WD Mainstream 500GB SATA 3
I ordered the system recovery disks from HP
Durning recovery I keep getting a 'Copy FIle Fails' error about half way through disk 2 of 3
I have tried several times and it keeps getting stuck
Someone suggested that it might be a BIOS problem, but I don't know how to navigate this tool. ( I have version F.26 I think)
Any help would be greatly appreciated.Hello BvinR,
I understand you are getting a "'Copy FIle Fails" error on the second disc when you are trying to recover after a failed hard drive. I have checked the HP Pavilion dm4 Entertainment PC Maintenance and Service Guideand on page 2 it lists a 500 GB, 7200 rpm hard drive as compatible with your system. I am more inclined to believe there is something wrong with the recovery disc. If this is the case I would encourage you to contact HP technical support to see about getting the second disc replaced. Be sure to explain to them as you did here. Below is the contact links for HP Technical Support if you need them.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
So for my A2 studies I have to make an interactive product using flash. Long story short, I needed to make a flash gallery. I am using the "Zen Gallery Flash Component" and this is my code;
galleryInstance.albums=[ { imagesFolder:"N:\ICT\ICT Unit 10\Prototype 3\images", icon:"4.jpg", items: [ {source:"1.jpg"}, {source:"2.png"}, {source:"3.jpg"}, {source:"4.jpg"}, {source:"5.jpg"} ] }, { imagesFolder:"N:\ICT\ICT Unit 10\Prototype 3\images", icon:"8.jpg", items: [ {source:"6.png"}, {source:"7.jpg"}, {source:"8.jpg"}, {source:"9.jpg"}, {source:"10.jpg"} ] } ]; galleryInstance.build();
The user manual does not specify any more coding is needed (I read all the relevant parts and couldn't find anything). The problem is that my images do not show but when exporting the flash product, the gallery is fully functionon - it seems that it cannot locate my images.
In addition to this, I get multiple Output Errors;
TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::IOErrorEvent@2d09a709 to Error. TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::IOErrorEvent@2d09a709 to Error. TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::IOErrorEvent@2d09a709 to Error.etc..
What am I doing wrong?I'm not sure, the gallery just appeares to be an SWF.
This is all that came up when I clicked it (I had a look at the parameters and they don't seem to help in the addition of pictures).
There appears to be no forum for this flash component :L -
<p>Need help with the following error.....what does it mean....</p><p>28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1<br /><font color="#ff0000">28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at</font><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1><br />28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>.<br />28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1<br />28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.</p><p>Any help would be greatly appreciated. It's something to do with my datasource and possibly the codepage but I'm really not sure.</p><p>-m<br /></p>
please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.
-
My Code:
<?xml version="1.0" encoding="UTF-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:states>
<mx:State name="addRoleState">
<mx:RemoveChild target="rLabel"/>
<mx:RemoveChild target="pLabel"/>
<mx:RemoveChild target="h1Box"/>
<mx:AddChild relativeTo="roleForm" position="firstChild">
<mx:FormItem id="rNameId" label="Role">
<mx:TextInput id="roleName" />
</mx:FormItem>
</mx:AddChild>
<mx:AddChild relativeTo="roleForm" position="lastChild">
<mx:FormItem>
<mx:HBox id="h2Box">
<mx:Button id="saveButton" label="Save" click=""/>
<mx:Button id="cancelButton" label="Cancel" click="currentState=' '"/>
</mx:HBox>
</mx:FormItem>
</mx:AddChild>
</mx:State>
</mx:states>
<mx:Form id="roleForm">
<mx:FormItem id="rLabel" label="Role">
<mx:ComboBox id="roleCombo" labelField="roleName"/>
</mx:FormItem>
<mx:FormItem id="pLabel" label="Permission">
<mx:List id="permDataId" width="75"/>
</mx:FormItem>
<mx:FormItem id="h1Box">
<mx:HBox>
<mx:Button id="editButton" label="Edit" click=""/>
<mx:Button id="deleteButton" label="Delete" click=""/>
<mx:Button id="addButton" label="Add Role" click="currentState='addRoleState'"/>
</mx:HBox>
</mx:FormItem>
</mx:Form>
</mx:WindowedApplication>
I am getting the below error when I click 'cancel' button (where currentState=' ' event function triggers)
TypeError: Error #1034: Type Coercion failed: cannot convert "h1Box" to mx.core.UIComponent.
at mx.states::RemoveChild/remove()
at mx.core::UIComponent/removeState()
at mx.core::UIComponent/commitCurrentState()
at mx.core::UIComponent/setCurrentState()
at mx.core::UIComponent/set currentState()
at RoleInfo/__cancelButton_click()
Please help me understand what is causing the above error.Hi,
I was able to get your app to work under Flex 3.5 by making a few changes. First, I had to add curly brakets around the RemoveChild targets and the AddChild relativeTo properties. Finally, I removed the extra space in cancelButton's click method.
Hope this helps,
Chris
Here's the revised code:
<?xml version="1.0" encoding="UTF-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:states>
<mx:State name="addRoleState">
<mx:RemoveChild target="{rLabel}"/>
<mx:RemoveChild target="{pLabel}"/>
<mx:RemoveChild target="{h1Box}"/>
<mx:AddChild relativeTo="{roleForm}" position="firstChild">
<mx:FormItem id="rNameId" label="Role">
<mx:TextInput id="roleName" />
</mx:FormItem>
</mx:AddChild> <mx:AddChild position="lastChild">
<mx:FormItem>
<mx:HBox id="h2Box">
<mx:Button id="saveButton" label="Save" />
<mx:Button id="cancelButton" label="Cancel" click="currentState=''"/>
</mx:HBox>
</mx:FormItem>
</mx:AddChild>
</mx:State>
</mx:states>
<mx:Form id="roleForm">
<mx:FormItem id="rLabel" label="Role">
<mx:ComboBox id="roleCombo" labelField="roleName"/>
</mx:FormItem>
<mx:FormItem id="pLabel" label="Permission">
<mx:List id="permDataId" width="75"/>
</mx:FormItem>
<mx:FormItem id="h1Box">
<mx:HBox>
<mx:Button id="editButton" label="Edit" />
<mx:Button id="deleteButton" label="Delete" />
<mx:Button id="addButton" label="Add Role" click="currentState='addRoleState'"/>
</mx:HBox>
</mx:FormItem>
</mx:Form>
</mx:WindowedApplication> -
I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do
Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive. -
Hi,
I am doing remote client copy from (Development Server - ECD 140) to
our (Sandbox System - E6S 150) and the client copy keeps failing. I get
the below error message. Please advise what is the solution to this
problem? I am also copying the log file of the remote client copy below
Error Message:
Change documents are not copied
3 Tables cannot be converted
Critical differences: Missing tables: 125
Log file of remote client copy below
Target Client
150
Source RFC Dest.:
ECDCLNT140
System Name:
ECD
Client in Source System
140
Copy Type
Remote copy
Profile
SAP_ALL
Status
Cancelled. See Log
User
SAP*
Start on
08.05.2010 / 17:05:18
Last Entry on
08.05.2010 / 17:13:36
Last Action:
RFC DDIC System Comparison
Statistics for this Run
- No. of Tables
0 of 56508
- Copied Lines
0
Warnings and Errors
Table Name
Component
Package
/SAPTRX/EXT_AOT
Table Def. Missing Locally
/SAPTRX/EXT_EE
Table Def. Missing Locally
/SAPTRX/EXT_ETY
Table Def. Missing Locally
/SAPTRX/EXT_EVT
Table Def. Missing Locally
/SAPTRX/EXT_FLD
Table Def. Missing Locally
/SAPTRX/EXT_FLDS
Table Def. Missing Locally
/SAPTRX/EXT_FLDT
Table Def. Missing Locally
/SAPTRX/EXT_PAR
Table Def. Missing Locally
A850
Table Def. Missing Locally
A851
Table Def. Missing Locally
A852
Table Def. Missing Locally
A900
Table Def. Missing Locally
A901
SD-MD-CM
Different Field Names
A902
Table Def. Missing Locally
A903
Table Def. Missing Locally
A904
Table Def. Missing Locally
A909
Table Def. Missing Locally
A910
Table Def. Missing Locally
A911
Table Def. Missing Locally
A912
Table Def. Missing Locally
A933
Table Def. Missing Locally
A935
Table Def. Missing Locally
A942
Table Def. Missing Locally
A943
Table Def. Missing Locally
A944
Table Def. Missing Locally
A945
Table Def. Missing Locally
A946
Table Def. Missing Locally
A947
Table Def. Missing Locally
A948
Table Def. Missing Locally
A949
Table Def. Missing Locally
A952
Table Def. Missing Locally
A953
Table Def. Missing Locally
A954
Table Def. Missing Locally
A955
Table Def. Missing Locally
A956
Table Def. Missing Locally
A957
Table Def. Missing Locally
A958
Table Def. Missing Locally
A961
Table Def. Missing Locally
A962
Table Def. Missing Locally
A963
Table Def. Missing Locally
A964
Table Def. Missing Locally
A965
Table Def. Missing Locally
A966
Table Def. Missing Locally
A967
Table Def. Missing Locally
A981
Table Def. Missing Locally
A982
Table Def. Missing Locally
A983
Table Def. Missing Locally
A984
Table Def. Missing Locally
A985
Table Def. Missing Locally
A986
Table Def. Missing Locally
A987
Table Def. Missing Locally
A999
Table Def. Missing Locally
AFRU
PP-SFC-EXE-CON
Field missing locally
B901
Table Def. Missing Locally
B902
Table Def. Missing Locally
B903
Table Def. Missing Locally
B905
Table Def. Missing Locally
B906
Table Def. Missing Locally
B907
Table Def. Missing Locally
B950
Table Def. Missing Locally
B997
Table Def. Missing Locally
B998
Table Def. Missing Locally
B999
Table Def. Missing Locally
K9RECD1400004
Table Def. Missing Locally
KOTD601
Table Def. Missing Locally
KOTD602
Table Def. Missing Locally
KOTD603
Table Def. Missing Locally
KOTE901
Table Def. Missing Locally
KOTE902
Table Def. Missing Locally
LIKP
LE-SHP
Field missing locally
S001BIW1
LO-LIS-DC
Table has convertible differen
S001BIW2
LO-LIS-DC
Table has convertible differen
Z864DATA
Table Def. Missing Locally
Z864DIRECT
Table Def. Missing Locally
Z864INVOICETYPES
Table Def. Missing Locally
Z864ORDERTYPES
Table Def. Missing Locally
Z864RATES
Table Def. Missing Locally
Z864YENADJUST
Table Def. Missing Locally
ZBJOB_EMAIL
Table Def. Missing Locally
ZCSTMATNRLBL
Table Def. Missing Locally
ZCUSTJULIAN
Table Def. Missing Locally
ZFEDEX_COUNTRY
Table Def. Missing Locally
ZFEDEX_INBOUND
Table Def. Missing Locally
ZFEDEX_OUTBOUND
Table Def. Missing Locally
ZFI_EXCG_CURR
Table Def. Missing Locally
ZGBASE
Table Def. Missing Locally
ZGPRICE
Table Def. Missing Locally
ZHIPVALUES
Table Def. Missing Locally
ZIDOCDSS
Table Def. Missing Locally
ZLABOR_TIME
Table Def. Missing Locally
ZMACH_TIME
Table Def. Missing Locally
ZMM_GIMS_MTART
Table Def. Missing Locally
ZMM_WM_MAP
Table Def. Missing Locally
ZNGK_WORKFLOW
Table Def. Missing Locally
ZPPCRT
Table Def. Missing Locally
ZPPERRORLOG
Table Def. Missing Locally
ZPPEXPIRE
Table Def. Missing Locally
ZPPJOBMAP
Table Def. Missing Locally
ZPPNUM
Table Def. Missing Locally
ZPPWRKMAP
Table Def. Missing Locally
ZPP_COMP
Table Def. Missing Locally
ZPP_EXT_SOP
Table Def. Missing Locally
ZPP_MV_IN
Table Def. Missing Locally
ZPP_MV_OUT
Table Def. Missing Locally
ZPP_OPID_HU
Table Def. Missing Locally
ZPP_SOP_PBCR1
Table Def. Missing Locally
ZPP_SOP_PBCR3
Table Def. Missing Locally
ZPP_SOP_PBCR5
Table Def. Missing Locally
ZQM_CUST_BATCH
Table Def. Missing Locally
ZSD_NAPA
Table Def. Missing Locally
ZSD_PRICE_BLOCK
Table Def. Missing Locally
ZSD_SHPCND
Table Def. Missing Locally
ZSHIPVALUES
Table Def. Missing Locally
ZTABMAINT
Table Def. Missing Locally
ZUPS_COUNTRY
Table Def. Missing Locally
ZUPS_FEDEX_LOG
Table Def. Missing Locally
ZUPS_INBOUND
Table Def. Missing Locally
ZUPS_OUTBOUND
Table Def. Missing Locally
ZWMPACK2LABEL
Table Def. Missing Locally
ZWM_CUST_HU
Table Def. Missing Locally
ZWM_HU_HDR
Table Def. Missing Locally
ZWM_HU_ITEM
Table Def. Missing Locally
ZWM_IB_GR
Table Def. Missing Locally
ZYA1
Table Def. Missing Locally
ZYA2
Table Def. Missing Locally
ZYA3
Table Def. Missing Locally
ZYA5
Table Def. Missing Locally
ZYADDER
Table Def. Missing Locally
ZYATYPES
Table Def. Missing Locally
ZYAVG
Table Def. Missing LocallyI ran the report "RSCLICHK" on the target client and below are the results. There are some table differences. How do i syncronnize the tables so that i can successfully complete the remote client copy? Do i make the table changes on the source system or the target system? I was also told that the table changes will take days to complete. What is the most efficient way to syncronize the tables?
AFRU Field Missing Local PP-SFC-EXE-CON CORU SAP TRANSP Order Confirmations SAPK-603DDINSAPAPPL
S001BIW1 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW1 * SIS: Customer Statistics
S001BIW2 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW2 * SIS: Customer statistics
A901 Fields Missing <-> SD-MD-CM VKOK VLOVELACE TRANSP Sales org./Distr. Chl/Division/Cust.group/PH2/Price grp/Pric
LIKP Field Missing Local LE-SHP VL SAP TRANSP SD Document: Delivery Header Data SAPK-603DDINSAPAPPL
/SAPTRX/EXT_AOT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EE Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_ETY Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EVT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLD Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDS Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_PAR Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
A850 Table Missing Local SD-MD-CM VKOK TRANSP
A851 Table Missing Local SD-MD-CM VKOK TRANSP
A852 Table Missing Local SD-MD-CM VKOK TRANSP
A900 Table Missing Local SD-MD-CM VKOK TRANSP
A902 Table Missing Local SD-MD-CM VKOK TRANSP
A903 Table Missing Local SD-MD-CM VKOK TRANSP
A904 Table Missing Local SD-MD-CM VKOK TRANSP
A909 Table Missing Local SD-MD-CM VKOK TRANSP
A910 Table Missing Local SD-MD-CM VKOK TRANSP
A911 Table Missing Local SD-MD-CM VKOK TRANSP
A912 Table Missing Local SD-MD-CM VKOK TRANSP
A933 Table Missing Local SD-MD-CM VKOK TRANSP
A935 Table Missing Local SD-MD-CM VKOK TRANSP
A942 Table Missing Local SD-MD-CM VKOK TRANSP
A943 Table Missing Local SD-MD-CM VKOK TRANSP
A944 Table Missing Local SD-MD-CM VKOK TRANSP
A945 Table Missing Local SD-MD-CM VKOK TRANSP
A946 Table Missing Local SD-MD-CM VKOK TRANSP
A947 Table Missing Local SD-MD-CM VKOK TRANSP
A948 Table Missing Local SD-MD-CM VKOK TRANSP
A949 Table Missing Local SD-MD-CM VKOK TRANSP
A952 Table Missing Local SD-MD-CM VKOK TRANSP
A953 Table Missing Local SD-MD-CM VKOK TRANSP
A954 Table Missing Local SD-MD-CM VKOK TRANSP
A955 Table Missing Local SD-MD-CM VKOK TRANSP
A956 Table Missing Local SD-MD-CM VKOK TRANSP
A957 Table Missing Local SD-MD-CM VKOK TRANSP
A958 Table Missing Local SD-MD-CM VKOK TRANSP
A961 Table Missing Local SD-MD-CM VKOK TRANSP
A962 Table Missing Local SD-MD-CM VKOK TRANSP
A963 Table Missing Local SD-MD-CM VKOK TRANSP
A964 Table Missing Local SD-MD-CM VKOK TRANSP
A965 Table Missing Local SD-MD-CM VKOK TRANSP
A966 Table Missing Local SD-MD-CM VKOK TRANSP
A967 Table Missing Local SD-MD-CM VKOK TRANSP
A981 Table Missing Local SD-MD-CM VKOK TRANSP
A982 Table Missing Local SD-MD-CM VKOK TRANSP
A983 Table Missing Local SD-MD-CM VKOK TRANSP
A984 Table Missing Local SD-MD-CM VKOK TRANSP
A985 Table Missing Local SD-MD-CM VKOK TRANSP
A986 Table Missing Local SD-MD-CM VKOK TRANSP
A987 Table Missing Local SD-MD-CM VKOK TRANSP
A999 Table Missing Local SD-MD-CM VKOK TRANSP
B901 Table Missing Local SD-MD-CM VKOK TRANSP
B902 Table Missing Local SD-MD-CM VKOK TRANSP
B903 Table Missing Local SD-MD-CM VKOK TRANSP
B905 Table Missing Local SD-MD-CM VKOK TRANSP
B906 Table Missing Local SD-MD-CM VKOK TRANSP
B907 Table Missing Local SD-MD-CM VKOK TRANSP
B950 Table Missing Local SD-MD-CM VKOK TRANSP
B997 Table Missing Local SD-MD-CM VKOK TRANSP
B998 Table Missing Local SD-MD-CM VKOK TRANSP
B999 Table Missing Local SD-MD-CM VKOK TRANSP
K9RECD1400004 Table Missing Local CO-PA KEG0 TRANSP
KOTD601 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD602 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD603 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE901 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE902 Table Missing Local SD-MD-CM VKOK TRANSP
Z864DATA Table Missing Local ZDEV TRANSP
Z864DIRECT Table Missing Local ZDEV TRANSP
Z864INVOICETYPES Table Missing Local ZDEV TRANSP
Z864ORDERTYPES Table Missing Local ZDEV TRANSP
Z864RATES Table Missing Local ZDEV TRANSP
Z864YENADJUST Table Missing Local ZDEV TRANSP
ZBJOB_EMAIL Table Missing Local ZDEV TRANSP
ZCSTMATNRLBL Table Missing Local ZDEV TRANSP
ZCUSTJULIAN Table Missing Local ZDEV TRANSP
ZFEDEX_COUNTRY Table Missing Local ZDEV TRANSP -
CMS fails - Error 500 - since upgrading to SP19 (from 15) - [RESOLVED]
We have been using XI3.0 for almost two years now, however after patching to SP19, our CMS system has failed - Error 500:
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - (class: com/sap/cms/pcs/conf/core/plugin/DefaultTrack, method: readTrackConfiguration signature: (Ljava/lang/String;Ljava/lang/String;)Lcom/sap/cms/client/types/config/TrackConfigurationObject;) Incompatible object argument for function call
at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
at com.sap.cms.ui.wl.Custom1.getConfigurationDataOfTrack(Custom1.java:10038)
at com.sap.cms.ui.wl.Custom1.setSelectedTrack(Custom1.java:2823)
at com.sap.cms.ui.wl.Custom1.prepareTransportStudio(Custom1.java:3585)
... 46 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; {12F65990-D65C-C5FA-1449-43FE4509287F}; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Version
DOM version
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, Build ID: 6.4019.00.0000.20061005104024.0000 (release=630_VAL_REL, buildtime=2006-10-26:20:43:46[UTC], changelist=419718, host=PWDFM026)
J2EE Engine 6.40 patchlevel 106831.313
Java VM Java HotSpot(TM) Server VM, version:1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Other
Session Locale en
Time of Failure Tue Jan 30 09:30:57 UTC 2007 (Java Time: 1170149457113)
Web Dynpro Code Generation Infos
sap.com/tcSLCMS~WebUI
SapDictionaryGenerationCore (unknown)
SapDictionaryGenerationTemplates (unknown)
SapGenerationFrameworkCore (unknown)
SapIdeWebDynproCheckLayer (unknown)
SapMetamodelCommon (unknown)
SapMetamodelCore (unknown)
SapMetamodelDictionary (unknown)
SapMetamodelWebDynpro (unknown)
SapWebDynproGenerationCTemplates (unknown)
SapWebDynproGenerationCore (unknown)
SapWebDynproGenerationTemplates (unknown)
sap.com/tcwddispwda
No information available
sap.com/tcwdcorecomp
No information available
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Unexpected error; inform your system administrator - (class: com/sap/cms/pcs/conf/core/plugin/DefaultTrack, method: readTrackConfiguration signature: (Ljava/lang/String;Ljava/lang/String;)Lcom/sap/cms/client/types/config/TrackConfigurationObject;) Incompatible object argument for function call
at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessageInternal(MessageManager.java:254)
at com.sap.tc.webdynpro.progmodel.controller.MessageManager.raiseMessage(MessageManager.java:964)
at com.sap.cms.ui.wl.Custom1.getConfigurationDataOfTrack(Custom1.java:10038)
at com.sap.cms.ui.wl.Custom1.setSelectedTrack(Custom1.java:2823)
at com.sap.cms.ui.wl.Custom1.prepareTransportStudio(Custom1.java:3585)
at com.sap.cms.ui.wl.Custom1.wdDoInit(Custom1.java:299)
at com.sap.cms.ui.wl.wdp.InternalCustom1.wdDoInit(InternalCustom1.java:990)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.doInit(DelegatingCustomController.java:73)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:436)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:374)
at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:403)
at com.sap.tc.webdynpro.progmodel.context.MappedAttributeInfo.initAttributeMapping(MappedAttributeInfo.java:319)
at com.sap.tc.webdynpro.progmodel.context.MappedAttributeInfo.init(MappedAttributeInfo.java:278)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:674)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:659)
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:539)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:397)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:554)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:421)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:135)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:404)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I have some development to move through today as part of aproject, but we cannot due to this.
I have checked that the Data in ExchangeProfile is correct. No users are locked. I have started the CBS applications not started in Java Admin Console.
It worked before upgrading to SP19 (from 15).Hi,
I hope, please try this error in SAP Notes
like
Note 907721 - "Web Dynpro Client" missing in SAP GUI 6.40
similar Note 843804 ,
Regards
Chilla.. -
Copy Protection Error when doing a system recover - Satellite C655
I have a satellite c655 S5206. The computer seemed to have a virus as it would lock on windows and eventually wouldn't boot. I tried using the system recover option built in but it didn't work so I ordered the disk from Toshiba. When I tried to use them I got an Error 0x80030309 copy protection error. I though it was a corrupted or bad hard drive so I ordered a new one but I still get the same error when trying to install disk 1 of the system recovery process. Any help or explanation would be helpful. Thanks
Hi Models may differ in the way you use your recovery discs. You should read your user manuel to find out how to use these discs. Here's the basic way.
Using Recovery CDs / DVDs / Media
If you have created recovery DVDs/media for your system, you can restore your system from such media, if necessary. For example, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery DVDs/media. For instructions on creating recovery DVDs/media, see the How To: Understanding System Recovery Options + Creating / Purchasing Recovery Media article.
IMPORTANT: The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery.
To recover your internal storage drive from recovery DVDs/media:
Make sure your computer is turned off.
Do one of the following: If your recovery files are on DVDs, insert the first recovery DVD into your optical disc drive. If your recovery files are on a USB flash drive, connect the USB flash drive to your computer.
Turn on your computer. When the initial TOSHIBA screen displays, press the F12 key on your keyboard. The boot menu displays.
Using the arrow keys, select the DVD option or the USB Flash option, depending on which type of media you are using, and then press the Enter key.
A warning screen appears, stating that when the recovery is executed all data on your internal storage drive will be deleted and rewritten unless the “Recovery of Factory Default Software with user’s data” option is selected. Click Yes to continue.
When the Toshiba Recovery Wizard opens and the “Selecting a process” screen displays, select Recovery of Factory Default Software, and then click Next.
On the next screen you may have recovery method options. The default and recommended method is to Recover to Out of Box state.
Follow the on screen instructions as you navigate through the system recovery steps.
The laptop will restart multiple times and install the needed components.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
Client copy failed in SCM without livecache
Hi,
I am executing client copy on a SCM-EWM system with profile SAP_ALL. Client copy failed with error. How can I find what tables are not being copied?
The copy fail at post processing steps for this exit program "/SAPAPO/OM_CLNT_COPY_UPLOAD". My SCM system is not using LiveCache.
How do I confirm the copy is successful?
-Intan-Hi Deepak,
I found this is error in the client copy logs :
BEFORE_EXP_ADDRESS3 310 Q43C000004 320
Exit program BEFORE_EXP_ADDRESS3 successfully executed 10:12:57
Exit program BDC_DELETE_SESSION successfully executed 10:12:57
Error: Table /1CN/CPHPHU00001 error in DDIC - Check table with SE14
The data object could not be created: The type /1C N/CPHPHU00001 does not exist.
Error: Table /1CN/CPHPHU00002 error in DDIC - Check table with SE14
The data object could not be created: The type /1C N/CPHPHU00002 does not exist.
Error: Table /1CN/CPWPWO00001 error in DDIC - Check table with SE14
Maybe you are looking for
-
Enable Features - Managed Meta Data - MetaDataNav TaxonomyFieldAdded
I have been facing this issue for a while now and cannot get the features to work. i have tried using both STSADM and PowerShell Comands on both Features; 7201d6a4-a5d3-49a1-8c19-19c4bac6e668 73ef14b1-13a9-416b-a9b5-ececa2b0604c all indicate that the
-
okaay so my problem is whenever I import a cd into all seems okay until I sync the songs into my ipod. It seems that the first song is always cut off and then it skips to the next song. Does anybody else seem to have this problem? How do I solve this
-
Im installing a new version of PE12 and am getting an error message
The error message is something to do with the shaed technologies failing to install.
-
Eclipse question: why no compile?
hi, i have my Eclipse workspace in: c:\\.....\\java, in this java folder I have a project called FORS, with 2 folders in the project, one called Site, the other called JFORLIBRARY. In the Site folder, when I save the classes (in Eclipse) Eclipse auto
-
E2fsck: Bad magic number in super-block
e2fsck: Bad magic number in super-block while trying to open /dev/hda1 Yup, a very tricky one this is. I did the following: [root@(none)~]#e2fsck /dev/hda1 e2fsck 1.40.2 (12-jul-2007) /dev/hda1: clean, 310310/4702208 files, 8118002/9396009 blocks Wha