Copy File from Macbook Pro to Ipad2

I am trying to transfer a file of Keynote Users Manual from my Macbook Pro13 to my Ipad2. Any suggestions will be appreciated. I am new to Mac, coming from the PC World.
Tks

If it is a pdf - why don't you just email it to yourself. That is the easiest thing to do - IMO - and then you can tap and hold down on the pdf icon in the email in the mail app and use the "Open In" feature to open the pdf in iBooks.
Download iBooks if you do not already have it. It is free and you can save pdf files in iBooks. You can download Adobe Reader as well - also free - and do the same with it.

Similar Messages

How to transfer files from MacBook Pro pages app to iPad mini pages app?

How to transfer files from MacBook Pro pages app to iPad mini pages app?

The above assumes you are running current software.
Mac - OX X 10.9.2, Pages 5.1.
iPad - iOS 7.0.6, Pages 2.1.

I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other

I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other.
Any ideas?
Barry

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Cannot transfer files from macbook pro running os 10.6 to macbook pro running 10.8

having trouble transferring files from macbook pro running os 10.6.7 to macbook pro running os 10.8. getting message to up grade migration assistant but cannot find upgrade

The latest version of Migration Assistant is version 5 and should have been installed in you Utilities folder when you upgraded to version 10.8. Use the 10.8 version machine to migrate to and you should have no problems.
Clinton

Hello everybody! i want ask you... how can i transfer my files from macbook pro to flash card or other devices?

hello everybody! i want ask you... how can i transfer my files from macbook pro to flash card or other devices?

Of course you can. You may use USB drives, HDDs and other Mac if the need be. More details from you will be required if you want more information.
Ciao.

Moving files from MacBook Pro to MacBook Air

My MacBook Pro's display is all crapped out (can't even view on external monitor) and I'm trying to transfer files over to my new MacBook Air.
How can I do this? Since there is no Firewire on my Air, I can't boot into target disk mode and just copy my home folder over.
Any other suggestions?

If your display is so bad, I will assume you cannot get to system prefs to enable sharing/screen sharing etc.
Have you considered removing the HD from the MBP, putting it into an enclosure and connect it to the air via usb?
Given the state of things that is what makes sense to me.

Quickest way to transfer iMovie 09 Files from Macbook Pro to iMac

Hello:
We recently got an iMac and I would like to transfer my iMovie 09 files from my macbook pro to the iMac which also has iMovie 09. Can you suggest the quickest and easiest way to do this? I am assumign this can be done since they are both iMovie 09-anyhelp is appreciated

Huh.
Well, my approach has always been:
1. Click the "Consolidate Media" menu in File, and click the buttons to move all source materials into the project.
2. Shut down iMovie
3. Navigate to Movies/iMovie Projects in Finder, and copy the corresponding project over to the other machine's Movies/iMovie Projects folder.
4. Start up iMovie on the other machine.
I don't do much video (mostly photo slideshows) in iMovie, but this certainly hasn't caused me any problems before. iMovie just sees the new item in its iMovie Projects folder and allows you to select it.

How To Transfer Hard Drive Files from Macbook Pro

I have a macbook pro(late 2006 model) which won't turn on. Brought it to the apple store for them to take a look at. I was told that the main circuit board is broken and it will be cheaper to buy a newer macbook instead of fixing it. I was also told that the harddrive was ok. How do I transfer the files from my old macbook pro hardrive(which won't turn on) to a new macbook pro? They offered to help me at the apple store but it will cost me $99 for their "one to one." Can someone help me? Thanks!

k-ci204 wrote:
What size of a usb external harddrive caddy do I need? What is compatable with the macbook pro hardrive?
2.5" SATA. USB2 models can be found be found for $15 or so. Then the enclosure can be used with an old or new HD for backups/troubleshooting. I have way too many around, but I don't know what I'd do without at least one 2.5" and one 3.5" (but I prefer the faster FireWire 800 models, which are more expensive). In any case, I think it's safe to say you won't regret spending $15 on an enclosure.

Can't copy files from Macbook to External Hard Drive

Hi:
I have an external hard drive for backup, works fine at the office with mssoft -- but for some reason I am told by Macbook that I cannot modify the External hard drive when trying to copy files and folders to the drive from the Macbook.
I'm thinking "read only" because I know how to change attribute in Windows - but this is my first MAC (and generally I love it).
HELP -- how do I copy to the External Drive?
...Dan

This drive is probably formatted as NTFS for use with the PC.
Your options are:
1) Install NTFS-3g on your Mac (available here: http://macntfs-3g.blogspot.com/2010/06/ntfs-3g-for-mac-os-x-2010522.html)
2) Reformat the external drive as FAT32 (you'll have to save the data elsewhere, then use either OS X's Disk Utility to reformat the drive, or use a Windows tool to do the same thing). FAT32 has a 4GB maximum file size limit.
3) Reformat the drive as HFS+ on the Mac (saving the data elsewhere first) and install MacFuse on the PC. HFS+ does not have a maximum file size limit, but MacDrive is not free.
http://www.softpedia.com/get/File-managers/MacDrive.shtml
~Lyssa

Copying files from Macbook to PC help (network)

I just got a 13" Macbook the other day and I'm learning how to use it. I've been playing around with the Photo Booth program where you can take snapshots or videos with the built-in camera. Specifically, I have created a movie with Photo Booth and want to copy it to a folder on my Windows XP PC via the network.
I have networking set up just fine and I have enabled sharing with a folder on my PC (and allowed network users to modify the files checkbox). So these are the steps I'm taking to copy the file, but it's not working:
1) I have dragged the movie from Photo Booth to the desktop on my Macbook. It is a .mov file appx 70MB in size.
2) Then I drag the file from the desktop into Finder where I open my network and open my shared folder on the PC and let go.
3) The file shows that it is being copied (the bar successfully moves from left to right indicating the file is being copied). But at the end of the copy process I hear an audible sound and the file is not present in the folder on my PC. I do, however, have a file called ".DS_Store" on my PC in the folder I was trying to copy the .mov file to. At first, this made me think of my Nintendo DS, but then I discovered this is just a file the Mac creates in every folder.
But the .mov file is not there! No matter what I do, I cannot get the file to copy there. I have even tried using Edit/Copy on the file on my Mac and then pasting into the folder. Same thing happens.
What am I missing? I have successfully been able to copy some MP3's from my PC to my MAC, but this is the first file I've tried to copy from my MAC to my PC.

It sounds like perhaps you are coping into a different folder than you think you are.
On the PC, place a file into the destination folder. On the Mac, open up the destination folder over the network. If you cannot see the file you just added, then we have confirmed that you are probably copying the file into a different location.

Aperture installation deleted all image files from MacBook Pro.

After installing Aperture 3, I noticed that all the image files I had on my MacBook Pro immediately disappeared. These were stored in various locations throughout my computer depending on subject (e.g. "Emergency Response Training", "Summer 2009", "Car Restoration" and so on). A small number were in the "Pictures" folder but most were kept in other locations. All the folders and subfolders where these images were stored are intact but the images are gone. There is simply a "thumbs.db" file inside and the folder size is about 6 kb on average.
I did nothing other than install Aperture (no importing or library creation) and none of these images or folders are in the Aperture library. A similar thing happened with iPhoto where all my iphoto thumbnails show up but there appears to be no actual photo. No images prior to Aperture installation appear anywhere on the Macbook using tailored queries with "Find".
Apple support indicated that Aperture would not search out these photos unless prompted and would never delete them but It's hard to imagine how else this could have happened, as it happened only during installation (subsequent photos are fine) and targeted all image files in every location. Hard drive is new and indicates no problems.
Any ideas what might have happened - and, more importantly, how I might be able to recover the missing images? Unfortunately, my upgrade to Lion obliterated my DNS 321 back up disk, as well, and I don't yet know if I can recover those files.
Thanks for any help you can offer.

Apple support claimed it was impossible for Aperture to delete files, as well, Allen. All I can tell you is I installed Aperture and the files immediately disappeared. I installed Aperture with the intention of learning its capabilities over the ensuing months, as I had never used it before, and so made sure to do nothing but install and launch so I could have a look at it and see how it was set up.
The network hard drive obliteration occured when I was trying to transfer novie files from my Macbook to my DNS 321 network drive, which I use to store all my backups and most of my media files. I've done this countless times with Snow Leopard without a hitch. However, when I tried it with Lion the system locked up during the transfer and I lost my connection to the drive. Once I managed to reconnect, I found that I couldn't get into the folders on the network drive anymore. All that would come up was a "My Documents" folder, which had no content. After doing a websearch I discovered that Lion no longer supports DNS 321 and that others with similar style drives had been having similar problems. What might be unique to my situation was that when I hooked up an old PC to the DNS 321 I was able to get back into my original folder set up but I found that the folders labelled from (A to J) were missing entirely and that the remaining folders had no content.
So, as I mentioned in my first post, the only input from me was installation and launch of Aperture and the only thing I was doing with my network drive was transferring movie files from the Macbook to the DNS 321 drive. If neither of those actions could possibly have caused the problems I described, I'd be very eager to learn what did.

New iMac - need to move files from Macbook Pro to new iMac

Hi there everyone,
Did some quick searching, but didn't find the answer that I needed.
I am picking up my new 27" iMac (base model) and will need to move my files and programs from my Macbook Pro to the iMac. What is the best way to accomplish this? Are there any tools on the iMac that will help do that, or is it a manual effort?
Thanks!
Mark

When you first start new Mac it will ask you if you want to migrate. Say yes at that point and Setup Assistant will migrate everything for you.
Allan

Can't delete file from macbook pro...

I recently bought a new macbook pro (2.3 GHZ, i5, 4gb ram...) and began to download some torrents. I was converting one movie file to play on my iphone but I cancelled the conversion because I realized the picture quality of the movie wasn't that great. I deleted the file but now there is a left over file that can only be seen under the "all my files" section in the Finder that I canno delete. There is no icon for this file except for this grayed out cut out.
When I click "get info" I'm unable to move to trash that way and it says I have "unknown access" under the sharing and permissions tab. I can't drag the file to the trash bin and when I do, another file is taken instead. When I click on the icon this message displays -The alias “Immortals.2011.DVDScr#8B1B.divx” can’t be opened because the original item can’t be found" I'm given options to click "Delete alias, Fix alias, or Ok". When I click delete alias, nothing happens, when I click Fix alias I can't find the original becuase I've obviously deleted it and clicking ok just closes the message.
I have two questions,
1. When I "get info" on file, it states that the file size is 956 mb. Is it really taking that much space up on my hd? I know I deleted the original file. What gives?
2. How can I delete this file?
I could really use some help on this. I've asked my friends and they coudln't figure it out either.
I'd appeciate any and all who can give me some ideas.
Thanks,
D
Message was edited by: dee-g

I can't change the file name or extension - it's grayed out.

How to transfer large files from macbook pro to External Hard Drive?

I want to transfer a file from my Mac to an external hard drive, it says "The item “File name” can’t be copied because it is too large for the volume's format."
I am trapped, if there is any way you could suggest me to overcome this problem I will be grateful.

I may be wrong, but I believe the format has something to do with it - note the sizes here (from the Help in Disk Utility on how to format a drive for Windows):

Transferring files from MacBook Pro to new iMac via Firewire

Hi guys
My MacBook Pro is seriously on its way out and I would like to transfer my music files, work documents, photographs, videos etc. onto my brand new iMac and the best way to do this I would think would be to link the two up via Firewire. The MacBook Pro is no longer accepting my external hard drive and fails during during DVD's, so those options are out.
So I was wondering if someone could advise me on what type of Firewire cable to get. As far as I'm aware I didn't get one with either the MacBook Pro or the new iMac, so I think a purchase is necessary however, I've spotted that there are different kinds with different ends, some which have 6-pin, 8-pin and 9-pin and I have no idea what to get. Could someone advise me on what would be the best item to get for this situation?
My MacBook Pro is one that was the model before the black keyboards came back in, and the iMac is the brand new one at 21".
Thanks for your help guys.
Steve.

Hi
FireWire 800 / FW800 / IEEE 1394b uses a 9-pin connector for both the imac and the macbook pro.
good luck.
M.

Copy File from Macbook Pro to Ipad2

Similar Messages

Maybe you are looking for