Copy filter forward makes FCP crash

Just wanted to report that when I apply the 3-way CC effect and try to copy the filter forward, it makes FCP crash, and it won't reopen until I restart the computer.

Trash FCP preferences using this free tool: http://www.digitalrebellion.com/prefman/
Repair permissions on your boot drive.
Restart.

Similar Messages

FCP crashes when editing in XDCAM HD4.2.2

Yes, it completley exits FCP leaving the editor to recover from the autosave several times a day. From other forums it appears to be a common problem. I have tried everything under the sun but still no go. I am told the XDCAM format is process intensive, but should it make FCP crash? Maybe the editor is scubbing too fast for it, as it doesn't happen so much in other suites with same hardware/software.
Message was edited by: JMC

The editor has tried using Prores 422 1080i and has the same crashing issue. I'm told once the XDCAM material is brought onto the timeline it is rendered as prores ,if this is selected. If that the case the problem isn't to do with the XDCAM format. Can anyone confirm this?
My next step is to do a hardware test as we have an almost identical system that works fine. Only difference is it only has 6GB RAM. I am thinking this one has been upgraded with dodgy RAM or incompatible RAM. The other thing that could be an issue is the Declink card. I read it could be conflicting with the eSATA card as though both like to have slot 4. The other difference between these systems is one uses the Declink/Black Magic BOB, the other uses the AJA BOB.

FCP crash while copying clips between sequences

Any insights as to why FCP crashes when I copy clips (overlay) from a small sequence into a larger sequence? I'm doing this by the drag/drop method.

The copy and paste suggestion is good... however I'm not crashing when I tried this just now... a drag and drop between sequences, so figure something's up. I'm running the universal version of FCP however.
Post back with the results of the copy and paste.
Are the sequences in the same project file?
Jerry
DP 2 Gig G5 DP 533 G4, 17" MPB C2D, Sound Sticks, 22,23 CD Mac OS X (10.4.8) 4 gig fibre Huge Systems Arrays, Kona 2 ATTO cards 7 TB of storage

Unable to Log and Capture AND make FCP a boot disk

I am unable to go into Log and Capture mode in FCP 4. I can capture from firewire using I movie just fine so I know the sytem works. The minute I open Log and Capture from within FCP (with the JVC Mini-DV camera hooked up thru Firewire), it crashes. Help. I upgraded from FCP 3 to FCP 4 a couple years ago and it hasn't worked right since. Would re-installing the FCP 4 upgrade work? Also, my system works very sluggish. Please explain to me how I would make the veersion of FCP 4 my boot disk. I realize that I can't have the FCP 4 application and the media on the same drive but is there a way to partition one of my drives and make FCP one of the startup disks? Hope this isn't too confusing. Thanks.

First off, FCP 4 was darn unstable. FCP 4.5 is a free upgrade and is STILL the most stable version out there. FCP 5 is getting there.
Secondly, try:
Shane's Stock Tip Mantra: If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://fcprescue.andersholck.com/ and run it.
2) Open the Disk Utility and Repair Permissions.
As for partitioning the hard drive, that isn't necessary. Hasn't been since FCP 3.
Shane

FCP crashes, and opening and saving projects take too much time

Since my upgrade to FCP 5.0.4 I’m having trouble on several aspects of FCP.
I am using an Xserve raid storage, connected via fiberchannel to an Xserve with 10.4.4.
The editing computers are connected via fiberchannel and Xsan to the central storage.
FCP runs on an Apple G5, and my projects run from an external disk described as above. Al the other FCP scratch disk settings are also set on the external disks.
Example:
I’m using the FCP 5.0.4 with the multi-clip mode, and one of the consequences is, that my projects become relatively large. The larger they become, the longer it takes to open (up to 10 minutes) it and to save it (up to 2 minutes). Together with these problems, FCP crashes a lot.
I set my “auto-save” at an interval of 15 minutes, to prevent to loose a lot of work, but when it takes 2 minutes to “auto-save” each time, I loose a lot of time.
So when my project was 224 MB, I made a copy of my project, and opened it from a local drive. Opening the project took also 10 minutes. But when it was open, “saving” the project took only 15 seconds, instead of 2 minutes. The “auto-save” was still on the external scratch disk. “Auto-saving” still took 2 minutes. So I set the “auto-save” on a local scratch disk, and after that, it took only 15 seconds. Opening the project still took 10 minutes. And the FCP didn’t crash frequently.
My conclusion would be that the problems have something to do with the size of the project in combination with the connection with the external scratch disks. Is this correct? If yes, how do I solve this.
And if not, what else could it be?
Out of memory
Another problem occurred when my project was 327 MB. I had a multi-clip sequence of 100 minutes, with 4 camera angles and a lot of cuts and effects in it. When I tried to “nest” the sequence, it didn’t work and got the message: “out of memory” . Then FCP crashed.
When I opened the project again (it took 10 minutes), I could not save it anymore: ”out of memory”. So now I cannot work with this project anymore.
How do I solve this?
Is my project or sequence too big?
Another crash example
FCP crashed sometimes, when I switch my “Ëxternal Video” setting from “Blackmagic 8 bit” to “Firewire PAL”. Could this have something to do with it the problems I previously described?
Can anyone help me with these problems?
G5 Mac OS X (10.4.4)

I've run into a simliar problem and I believe I traced the issue down to the number of files on the drive. A drive I was using had over 600,000 files on it. Opening projects took 5+ minutes, saving took 2+, for a 15 minute simple project.
See if that is your issue.
Edit: 600,000 files on the scratch/capture disk.

FCP Crashing?

FCP crashes when XL1 is fw connected. I have enclosed part of the report.
I have been working on a project for months now and everything has been working smoothly. Now, when I try to fw my project to my canon xl1, FCP crashes. ( I have been doing it this way for a looong time with no problems).
Here's what I do: connect the cam/computer via fw; open fcp; make sureA/V output settings are on "apple fw". I get signal to the camera but as soon as I try to play anything on the timeline or any moviefile it "unexp. quits".
This started last Friday and the first thing I did was replace the FW cable. It worked perfectly after that until today. Now it has started again. I trashed the prefs w/ FPC rescue and reset my permissions. Still crashed. I then connected a different camera (smaller canon). I got video but audio was heavily distorted. Then, while the little camera was still connected, FCP suddenly acted like I had the A/V settings to "built in" with audio coming from the comp speakers (that audio was not distorted). I went to double-check the settings again and it suddenly crashed.
I have not updated anything recently. The camera is the only fw connected. FCP works fine w/o the camera. (I have a fw harddrive that works fine too but I disconnect it when the camera is connected). I'm using 10.3.9 on a 1.8 ghz Power pc G-5 w/ 1 GB DDRSD ram and FCP 4.5
Here is the report:
Date/Time: 2007-03-23 12:49:15 -0500
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: Final Cut Pro
Path: /Applications/Final Cut Pro HD.app/Contents/MacOS/Final Cut Pro
Version: 4.5 (4.5)
PID: 997
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x000000e4
Is that enough of the report?
Any ideas? I did some searching first but didn't find any ansewrs for this.
Thanks!
G5 1.8G 1GB DDR SDRAM Mac OS X (10.3.9)

Here's something else it's doing, (I had forgotten how it started). Before it started crashing, It did send video to the xl1 but no audio. I switched external audio to my other 2 speakers and it came through them nicely. Switch it back to apple-fw and I can see the meters pumping on the comp screen but nada on the camera meters.
I just updated quicktime and decided to try her again. Now it's back to no crashes but no audio to the xl1.
Please help!
Thanks!
G5 1.8G 1GB DDR SDRAM Mac OS X (10.3.9)

DSR11 Not Recognised. FCP Crashes When Log & Capture Selected.

I've recently had a quite traumatic period installing QT7 Pro to work with iDVD disk burning. During that period, FCP3 worked faultlessly. Succeeded at last with disk burning then shut down for the night. Next day went into FCP and found that my DSR11 was not being seen by it. Chose 'Continue' and tried to set things up through 'Easy Setup' in the usual way. Couldn't be done. Selected Log and Capture as a 'try' and FCP crashed, leaving me with the Desktop screen. Despite numerous attempts to create a connection with the DSR11, I always am getting the box telling me it cannot be found and giving the choice to try again or select 'Continue.'
I'm wondering if the QT settings were in some way corrupted as I shut down the computer.... I'd like some help in getting back the settings.
I downloaded the QT7 upgrade which afforded the correct running of FCP and iDVD disk burning but now I can't find any record of the prog and its key in order to re-install it. I looked in HD/Library/Receipts and could only find references to Flip4Mac and QT Packages - no QT references with numbers following. Since inplutting this post I've found that the last mentioned QT package is 7.2 so I tried reinstalling it but after going through the procedure it ends with a message that there were errors in the installation and that I should try reinstalling it again.... Well, after four attempts with the same result, I'm here, and on tenterhooks!
As an aftermention..... I also have used the DSR11 with my MacPro to successfully operate FCP in its normal way.
Ron.
Message was edited by: Ron

On the Apple website it specifically states that QT7.2 with OSX.4.10 (actually any system of 10.3.9 and above) is the best way forward for the most efficient result from my computer. In view of that, I've recently used their Feedback page to pass the information to them. Yes, I know it states that one can only use it for feedback and they will not entertain other than that but we should have the abililty to put back to them the sort of quandary I'm in over their OS and allegedly compliant prog - ie QT7.2.
I've now taken the bull by the horns, because there's no other way I'm going to get satisfaction with Apple's software which should be capable as stated, and I'm about to re-install QT7 then try once again. That's despite not finding those additional Receipt files for scrapping prior to the install.
I'll report back the result when finished and tested. If it again fails, Apple will get an official complaint regarding their software that fails after being bought when their advertising says it improves rather than fails.
Thanks for your inputs.
Ron.

Help! FCP crashes during H.264 export!

Hi All,
I am using Final Cut Pro 6 and need to create a Quicktime movie file that is under 2 GB in size. The film is 2h 3m. The frame size should be 480x270 and 24fps. I am using H.264 as my compressor. To accomplish this, I am exporting from FCP using “Export with Quicktime Conversion”. I don’t know a whole lot about compression, so I have pretty much been experimenting. First I exported using the Bitrate setting as Automatic, but the file was over 5 GB. I then set the bitrate to restrict to 750kbps and the resulting file was 660 MB. However, I wanted to push it to right under 2 GB, for the best possible quality. I tried again with the bitrate restricted to 2000kbps. However, it takes so long to render on my computer (a few days each time), and happened to lose power during this render. So, since then, I have tried various times with these same settings, and every time FCP “Quits Unexpectedly.”
Since then I have tried various things to try to isolate the issue and determine what the problem is:
I have deleted all old render files, reset permissions and trashed preferences, and still FCP crashes during export.
I tried exporting a different piece of footage (30 second clip) with the same settings and it works great.
After breaking apart, rendering, seeing if it crashes, cutting that in half, rendering that, seeing if it crashes, etc., I've determined that the problem is happening in the last 15 minutes of the film.
I've been rendering with these attributes:
Compressor: H.264
480 x 270
2000kbps bitrate
AAC audio
I took that section of the film that was crashing on render and rendered just the audio and it worked fine. Then I rendered just the video and it crashes, so I've determined it is the video.
I tried rendering at a different bitrate with the H.264 codec and it still crashed during render again.
I also just rendered with two different other video compressors: ProRes 422 HQ and HDV 1080p24 and both rendered that section of the film fine.
This would leave me to believe that it is the H.264 codec at that one section of film crashing. Any idea why this might be, or how I can fix it?
Here are my conclusions:
-It occurs in the last 15min of the film
-Only occurs to video, not audio
-Only to H.264 codec
-Doesn't matter what the bitrate is at
-Deleting old render files doesn't fix it
-Trashing Prefs and resetting permissions doesn't fix it
-First noticed it after I tried rendering after my previous got killed due to a power loss in the house
If anyone has any input, I would greatly appreciate it! I have been dealing with this for weeks now and can't discover the problem. I am on my knees praying and begging because this whole film is caught up with this. I appreciate all and any suggestions! Thank you in advance and have a great day!

Thanks for the response!
I took the last 15 minutes, broke that into two 7-8 minute sections. Tried both and both crashed. Then took the first of those two sections (which I call 15/16 since it is the 15th section if the film is broken into 16 equal pieces) and cut that in half, so it was about 4 minutes long, and that crashed as well. The way the film was made is each scene is it's own sequence, and I then have all those into one full sequence (I'll reference that as TMUG-completed). That one sequence is then another sequence (TMUG-condensed), so I can then bump up all audio at once.
I have taken the sequence TMUG-completed, copied it, and pasted that into a new timeline, and rendered, but still got the crash. And all the render files have been removed as deep as they can go, going back to the individual scene render files.
Since each scene is it's own sequence, I can see that the problem is happening over multiple scenes.

FCP Crashes when I Try to Log and Transfer

I just got a new iMac and installed a new copy of Final Cut Studio on it. I'm trying to transfer footage from my camera (Cannon Vixia HFM300) to Final Cut Pro via Log and Transfer. When I first tried, the thumbnails came up fine. I realized however that I had the wrong SD card, so I switched it. Now as soon as the Log and Transfer window comes up, FCP quits unexpectedly.
I've tried disconnecting the camera and restarting the computer. Log and Transfer comes up fine when the camera's not connected. But when it is, the Log and Transfer window comes up for a second or two only, and then FCP crashes.
I'm not sure what else to try. So any help will be much appreciated!

So heres a status update:
Someone suggested that I copy the files off the camera and onto the computer, then eject the camera, and try to Log and Transfer from the new folder.
I tried that and FCP isn't crashing now, so that's an improvement. But when I try to open the folder in the L&T window, I get the following error message:
Warning
'Folder Name' contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Any suggestions?

FCP Crashes When Rendering or Converting Project

I have FCP Studio Academic. I have finished a project that is 2 hours and 20 minutes plus. I put several sequences together that are quite lengthy. I couldn't get it to convert using converter, or quicktime, because FCP would crash in converter shortly after it began. In quicktime, it would consistently reach the 80% mark and then crash. So I went to the 115th minute, and nothing was visibly distinct that would make me think that it was a problem.
So I deleted all the preferences stuff that the website tells you to, and nothing happened. I then deleted all of the rendered stuff, so I would have to re-render everything. Lo and behold, I couldn't render the individual sequences by themselves. I can't seem to get this to work, can anyone help??

In addition to the previous post,
subdividing the sequences to render did work. However, I tried to go back to the master sequence and render it, and I got the same result: FCP crashed.
I know that I can go through and subdivide all the sequences to render them and that will work to get them rendered, but I need to convert the project into a file so that I can put it on a disk.
Any Suggestions?

FCP crashes using MOTION files

Hi
85-min doc mostly shot by amateur camera person, wobbly, not steady, hand held...so 75% of the shots I brought to MOTION to stabilize, then brought those into FCP timeline...only 1/3 of the way through this process and FCP crashes every 5 minutes, then takes at least 5 minutes to open up again (relaunch), my 85 min timeline now won't render, says it's out of memory (using MAC PRO 3.0 with 8GB RAM)...crashes, some MOTION files turn orange in the canvas, then beach ball , then FCP crashes...what to do?
Thanks
K

try rendering the movies out of motion, and then import them into the FCP project instead of rendering the Motion files in the timeline. Leave the motion files in the timeline, but disable them (right click on them in the timeline and deselect clip enable). That way, if you need to go back in and tweak them, you can still open the motion file from the timeline, make your changes, re-output a movie file from Motion (save as same name and it will re-link) and you'll find the workflow quite easy.

FCP crashes when opening with motion2 files rountrip

I have a new MacPro FCP 5.1.2 and Motion2.
After creating a motion project, importing into FCP, FCP crashes 3 times before it will open the project. upon exiting it asks if i would like to keep the new settings.
In FCP under video processing my settings were High Precision and best motion filtering quality. But even at 8bit YUV and normal, it still seems to crash FCP.
Any ideas?
MacPro Mac OS X (10.4.8)

Motion 2.1?
When you crash, you get the option of Reporting to Apple? Take that and copy this section of the log:
Command: Final Cut Pro
Path: /Applications/Final Cut Pro HD.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [117]
Version: 5.1 (5.1)
Build Version: 4
Project Name: FCPApp
Source Version: 602161028
PID: 1460
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
Thread 0 Crashed:
0 ...lCutPro.Plugins.QTRtEffects 0x061eea90 KGSetQTRtResFile(unsigned char, short*) + 72
1 ...lCutPro.Plugins.QTRtEffects 0x061f5b08 RTEffectComponentRegister() + 96
2 ...lCutPro.Plugins.QTRtEffects 0x061e521c PluginStart + 2028
3 com.apple.FinalCutPro 0x001b23e0 DispatchRegisterMessage(void*, void*) + 104
. - buncha info -
25 com.apple.FinalCutPro 0x002c10a8 main + 64
26 com.apple.FinalCutPro 0x00002c24 _start + 340
27 com.apple.FinalCutPro 0x00002acc start + 60
Thread 1:
0 libSystem.B.dylib 0x9002c128 semaphorewait_signaltrap + 8
That's the kinda thing we need...But only the crashed section, not the entire log - like the example above.
Patrick

FCP Crashes when I try to open a project - just one project.

I even tried going to the Autosave Vault to open the latest saved file.
"Finder>Documents>Final Cut Pro Documents>Autosave Vault>Look for the folder with the project's name you are trying to open." Someone else had a similar issue and had success with that, but not me.
When I open the file it launches the latest FCP, but when it gets to 19% loaded FCP crashes and wants to report the error to Apple.
This file represents about one weeks worth of work, and FCP suddenly won't open this project anymore for some reason.
I made consistent backups, and even the backups won't work now.
How do people editing with FCP for a living survive if FCP does this??? This is unbelievable. If anyone can offer any ideas I would appreciate it.

Here's the first part of the crash log... (Let me know if the rest will help.)
Process: Final Cut Pro [154]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.5 (6.0.5)
Build Info: FCPApp-810171515~24
Code Type: X86 (Native)
Parent Process: launchd [80]
Date/Time: 2009-02-09 11:27:43.550 -0600
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000606258df
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0xa08c2ca2 0 + 2693541026
1 com.apple.FinalCutPro 0x001129eb pKGDictHasNotifier(KGDictInt*, KGErrorCode (*)(long, long, KGDictInt*, void*), KGDictNotifyActOn, unsigned char*, ...) + 53
2 com.apple.FinalCutPro 0x003b5cac pKGSpeedMakeInOutMessageable(KGDictInt*, unsigned char) + 158
3 com.apple.FinalCutPro 0x003b40a8 SpeedInOutMsgProc(long, long, KGDictInt*, SpeedNotifyRec*) + 364
4 com.apple.FinalCutPro 0x0012a7c8 ReadMessageable + 542
5 com.apple.FinalCutPro 0x0010fc66 ReadNotifiers + 482
6 com.apple.FinalCutPro 0x0001f378 KGDictReadHashCommon(KGDictInt**, KGStreamRecord*, KGReferenceTableInt*, KGDictInt* (*)(long)) + 332
7 com.apple.FinalCutPro 0x0001f460 KGDictReadHash + 38
8 com.apple.FinalCutPro 0x00113d8e KGDictReadInternal + 116
9 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
10 com.apple.FinalCutPro 0x0012b21b KGTypeReadPtr + 61
11 com.apple.FinalCutPro 0x000040ab KGDictReadArray + 341
12 com.apple.FinalCutPro 0x00113da8 KGDictReadInternal + 142
13 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
14 com.apple.FinalCutPro 0x0012b1d7 KGTypeReadValue + 131
15 com.apple.FinalCutPro 0x0001f351 KGDictReadHashCommon(KGDictInt**, KGStreamRecord*, KGReferenceTableInt*, KGDictInt* (*)(long)) + 293
16 com.apple.FinalCutPro 0x0001f460 KGDictReadHash + 38
17 com.apple.FinalCutPro 0x00113d8e KGDictReadInternal + 116
18 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
19 com.apple.FinalCutPro 0x0012b21b KGTypeReadPtr + 61
20 com.apple.FinalCutPro 0x000040ab KGDictReadArray + 341
21 com.apple.FinalCutPro 0x00113da8 KGDictReadInternal + 142
22 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
23 com.apple.FinalCutPro 0x0012b1d7 KGTypeReadValue + 131
24 com.apple.FinalCutPro 0x0001f351 KGDictReadHashCommon(KGDictInt**, KGStreamRecord*, KGReferenceTableInt*, KGDictInt* (*)(long)) + 293
25 com.apple.FinalCutPro 0x0001f460 KGDictReadHash + 38
26 com.apple.FinalCutPro 0x00113d8e KGDictReadInternal + 116
27 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
28 com.apple.FinalCutPro 0x0012b1d7 KGTypeReadValue + 131
29 com.apple.FinalCutPro 0x0001f351 KGDictReadHashCommon(KGDictInt**, KGStreamRecord*, KGReferenceTableInt*, KGDictInt* (*)(long)) + 293
30 com.apple.FinalCutPro 0x0001f460 KGDictReadHash + 38
31 com.apple.FinalCutPro 0x00113d8e KGDictReadInternal + 116
32 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
33 com.apple.FinalCutPro 0x0012b1d7 KGTypeReadValue + 131
34 com.apple.FinalCutPro 0x0001f351 KGDictReadHashCommon(KGDictInt**, KGStreamRecord*, KGReferenceTableInt*, KGDictInt* (*)(long)) + 293
35 com.apple.FinalCutPro 0x0001f460 KGDictReadHash + 38
36 com.apple.FinalCutPro 0x00113d8e KGDictReadInternal + 116
37 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
38 com.apple.FinalCutPro 0x0012b21b KGTypeReadPtr + 61
39 com.apple.FinalCutPro 0x000040ab KGDictReadArray + 341
40 com.apple.FinalCutPro 0x00113da8 KGDictReadInternal + 142
41 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
42 com.apple.FinalCutPro 0x0012b1d7 KGTypeReadValue + 131
43 com.apple.FinalCutPro 0x0001f351 KGDictReadHashCommon(KGDictInt**, KGStreamRecord*, KGReferenceTableInt*, KGDictInt* (*)(long)) + 293
44 com.apple.FinalCutPro 0x0001f460 KGDictReadHash + 38
45 com.apple.FinalCutPro 0x00113d8e KGDictReadInternal + 116
46 com.apple.FinalCutPro 0x00124e65 ReadDict(void*, KGStreamRecord*, KGReferenceTableInt*) + 67
47 com.apple.FinalCutPro 0x0012b21b KGTypeReadPtr + 61
48 com.apple.FinalCutPro 0x00114114 pKGDictReadWithFlags(KGDictInt**, KGStreamRecord*, KGMessageableRec*, unsigned long, __CFArray const*) + 580
49 ...FinalCutPro.Plugins.Browser 0x0ae0ba00 BrowserOpenFile(KGFileRec*, unsigned char, unsigned char) + 2680
50 ...FinalCutPro.Plugins.Browser 0x0ae0eec1 Browser(long, long, KGDictInt*, KGFileRec*) + 10179
51 com.apple.FinalCutPro 0x00183fd2 pKGDisplayFile(KGFileSpec*, char*, unsigned char, unsigned char) + 426
52 com.apple.FinalCutPro 0x003ff5ff OpenDocuments(AEDesc const*, AEDesc*, long) + 311
53 com.apple.AE 0x918bf648 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 144
54 com.apple.AE 0x918bf57e dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
55 com.apple.AE 0x918bf425 aeProcessAppleEvent + 177
56 com.apple.HIToolbox 0x935e39a5 AEProcessAppleEvent + 38
57 com.apple.HIToolbox 0x93641e46 AEProcessEvent + 160
58 com.apple.HIToolbox 0x93641d99 HIStdAppHandler::HandleEvent(OpaqueEventHandlerCallRef*, TCarbonEvent&) + 219
59 com.apple.HIToolbox 0x9363f03a TEventHandler::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 70
60 com.apple.HIToolbox 0x935b9143 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
61 com.apple.HIToolbox 0x935b857d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
62 com.apple.HIToolbox 0x935b83e2 SendEventToEventTargetWithOptions + 58
63 com.apple.HIToolbox 0x935e6d54 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 356
64 com.apple.HIToolbox 0x935b94fc DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2134
65 com.apple.HIToolbox 0x935b857d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
66 com.apple.HIToolbox 0x935d4ed2 SendEventToEventTarget + 52
67 com.apple.HIToolbox 0x93641b80 ToolboxEventDispatcher + 86
68 com.apple.HIToolbox 0x9363e3da RunApplicationEventLoop + 222
69 com.apple.FinalCutPro 0x0014cece KGMainEvent(void*) + 46
70 com.apple.FinalCutPro 0x002aae53 main + 59
71 com.apple.FinalCutPro 0x00003122 _start + 216
72 com.apple.FinalCutPro 0x00003049 start + 41
Thread 1:
0 libSystem.B.dylib 0x9506c6f2 select$DARWIN_EXTSN + 10
1 libSystem.B.dylib 0x9504e095 pthreadstart + 321
2 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 2:
0 libSystem.B.dylib 0x950243ae _semwaitsignal + 10
1 libSystem.B.dylib 0x9504ed0d pthreadcondwait$UNIX2003 + 73
2 libGLProgrammability.dylib 0x96579b32 glvmDoWork + 162
3 libSystem.B.dylib 0x9504e095 pthreadstart + 321
4 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004152e8 DisplayQueue::Run() + 702
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 5:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 6:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 7:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 8:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 9:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 10:
0 libSystem.B.dylib 0x9501d20e semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x9504f206 pthread_condwait + 1267
2 libSystem.B.dylib 0x95094539 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 11:
0 libSystem.B.dylib 0x9501d1c6 machmsgtrap + 10
1 libSystem.B.dylib 0x950249bc mach_msg + 72
2 com.apple.CoreFoundation 0x94de50ae CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x94de5d34 CFRunLoopRun + 84
4 com.apple.DVCPROHDMuxer 0x24aa20fb AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 297
5 libSystem.B.dylib 0x9504e095 pthreadstart + 321
6 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 12:
0 libSystem.B.dylib 0x9501d1c6 machmsgtrap + 10
1 libSystem.B.dylib 0x950249bc mach_msg + 72
2 com.apple.CoreFoundation 0x94de50ae CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x94de5cd8 CFRunLoopRunInMode + 88
4 com.apple.audio.CoreAudio 0x914fd5dc HALRunLoop::OwnThread(void*) + 160
5 com.apple.audio.CoreAudio 0x914fd464 CAPThread::Entry(CAPThread*) + 96
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 13:
0 libSystem.B.dylib 0x9501d1c6 machmsgtrap + 10
1 libSystem.B.dylib 0x950249bc mach_msg + 72
2 com.apple.CoreFoundation 0x94de50ae CFRunLoopRunSpecific + 1790
3 com.apple.CoreFoundation 0x94de5cd8 CFRunLoopRunInMode + 88
4 ....CoreMediaIOServicesPrivate 0x96bccf88 MIO::DAL::RunLoop::OwnThread(void*) + 160
5 ....CoreMediaIOServicesPrivate 0x96bcf108 CAPThread::Entry(CAPThread*) + 96
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 14:
0 libSystem.B.dylib 0x9501d2e6 machwaituntil + 10
1 libSystem.B.dylib 0x950943ad nanosleep + 314
2 libSystem.B.dylib 0x9509426d usleep + 61
3 com.apple.DesktopVideoOut 0x24b58b92 DVOClockGetTime + 1211
4 libSystem.B.dylib 0x9504e095 pthreadstart + 321
5 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 15:
0 libSystem.B.dylib 0x9501d226 semaphoretimedwait_signaltrap + 10
1 libSystem.B.dylib 0x9504f1ef pthread_condwait + 1244
2 libSystem.B.dylib 0x95050a73 pthreadcond_timedwait_relativenp + 47
3 ...ple.CoreServices.CarbonCore 0x96c2ce62 TSWaitOnConditionTimedRelative + 246
4 ...ple.CoreServices.CarbonCore 0x96c2cc42 TSWaitOnSemaphoreCommon + 422
5 ...ickTimeComponents.component 0x942e2bee ReadSchedulerThreadEntryPoint + 4724
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 16:
0 libSystem.B.dylib 0x9501d226 semaphoretimedwait_signaltrap + 10
1 libSystem.B.dylib 0x9504f1ef pthread_condwait + 1244
2 libSystem.B.dylib 0x95050a73 pthreadcond_timedwait_relativenp + 47
3 ...ple.CoreServices.CarbonCore 0x96c2ce62 TSWaitOnConditionTimedRelative + 246
4 ...ple.CoreServices.CarbonCore 0x96c2cc42 TSWaitOnSemaphoreCommon + 422
5 ...ple.CoreServices.CarbonCore 0x96c55248 AIOFileThread(void*) + 1056
6 libSystem.B.dylib 0x9504e095 pthreadstart + 321
7 libSystem.B.dylib 0x9504df52 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0xbfff001f ebx: 0x003b3f3c ecx: 0xa08bbedf edx: 0x49b9d5c4
edi: 0xbfffd834 esi: 0xbfffd88f ebp: 0xbfffd818 esp: 0xbfffd7ac
ss: 0x0000001f efl: 0x00010206 eip: 0xa08c2ca2 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x606258df

FCP Crash when opening log and transfer with some AVCHD footage on a card

Hi,
I'm using a freshly (re)installed version of FCP 7 on a brand new macbookpro loaded with 8gb ram and equipped with a small 2ghz Intel Core i7
I get footage shot on Panasonic ag-hmr10 minicams coming on SD cards as AVCHD footage. Sometimes the files are quite big, 17gb of compressed footage.
When I go to log and transfer, to convert the footage in apple prores, the l/t window opens, I see a preview of my footage, than the spinning beach ball of death shows up and FCP crashes every time. I've tried deleting the preferences and reinstalling the software. Still, it keeps crashing. Now the same file on a different computer equipped with FCP will be processed, slowly but surely.
Now I know I can work around this problem by going to toast as an encoder, but I want to fix this issue so I can operate from FCP. I've seen this problem posted before but never found any good solution.
Any suggestions?

Have you tried setting the L&T AVCHD audio conversion prefs to plain stereo?
Open the L&T window.
Click on the gear icon towards the upper center of the frame.
Select "Plain Stereo" For the AVCHD plugin.
MtD

How can I copy and forward a string of text messages from a Iphone 5s to an email address

How can I copy and forward a string of text messages from an IPhone 5S to an Email address?

You can find my blog post on the same.
http://www.pointtobenoted.com/blog/technology/mobile/how-to-copy-messages-from-i message/
The 6 steps process is listed step by step.
Hope this helps.
http://www.pointtobenoted.com/

Copy filter forward makes FCP crash

Similar Messages

Maybe you are looking for