Copy Folder with Joins. Export/Import Folder with joins. In EUL.

Ok, I've got a custom folder which has been made up by dragging items from 2 or 3 other folders into it.
It then has some joins of it's own, quite a few.
When trying to create a workbook from it, it takes 9 mins to run a query.
I need to work out what is slowing it down. If I create the same workbook against the folder which has the majority of the items in the custom folder, it runs instantly.
So I suspect it is one of the joins causing it.
My plan was to duplicate the folder, then remove joins until I find out which one is causing it.
However, if I cut n paste the folder, I get a copy without the joins.
If I export the folder and import it I get a copy without the joins.
Question then - how can I get a copy of a folder WITH the joins ?
I'm slightly concerned that when I export my EUL from the dev database and import it into the live database that I'm not going to get any joins since the export and import into the dev database is not retaining the joins.
Anyone ?

Hi,
The preferences for Disco Plus are set in the pref.txt file on the apps server and for Disco Desktop in the Windows Registry. I think the defaults are set on so unless you have changed them this is unlikely to help.
I think I read somewhere that the 11g optimiser will remove unused outer joins or where there is a foreign key constraint. I may have made that last bit up as I cannot find a reference to it, but it may be worth exploring.
To speed things up you could look at why this join is slowing things down. It could be that you need an index on the join column.
The join actually is used, in that it has to check in the other table that a record exists. This is why Discoverer cannot remove the join from the complex folder query. If it did and there where no matching records in the other table then you would get a different result.
Rod West

Similar Messages

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.h

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?

Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly

Nexus 1010 can not erase export-import folder

Hi Expert,
After we import the backup vsb. We try to erase the export-import folder. But system show "Device or resource busy". So we can not execute more export or import command. Please reference the below image and help us to fix this issue.
Ps. The Nexus 1010 version is "4.2.1.SP1.4"

Hello Meng,
I was able to recreate this problem in the lab. It appears it only occurs when importing a secondary VSB. A 'system switchover' of the N1010s frees the NFS locks. Not an ideal workaround, but a workaround.
CSCtz44247 has been opened for this problem.
Matthew

?BUG? App Export / Import error with javascript

Greetings -
Anyone have an idea on how to get around this or if I'm doing something wrong?
I have a page button to collapse a tree, with a URL Target of:
javascript:apex.widget.tree.collapse_all($v(P2130_TREE_ID));
Page and button work fine, have never had a problem. Until I went to do an application import and found that the SQL file for the import was corrupted due to the above line. SQL file has:
p_button_redirect_url=>'javascript:apex.widget.tree.collapse_all($v(P'||to_char(2130+www_flow_api.g_id_offset)||''_TREE_ID));',
It appears to have an extra (2x) single quote right before _TREE_ID. I have this logic in several places in my application and every place caused the same error.
Application copy also fails with same error.
Thanks,
Scott

Tom -
I assume this is the prior post you where talking about : https://forums.oracle.com/thread/2401714
However, this doesn't cover my problem. I have tried all the follow, and they all break export / import and copy functionality due to mismatched quotes:
collapse_all($v(P2130_TREE_ID));
collapse_all($v('P2130_TREE_ID'));
collapse_all($v("P2130_TREE_ID"));
collapse_all('&P2130_TREE_ID.');
collapse_all("&P2130_TREE_ID.");
These all allow the collapse button to work.
NOW, if I change my ID tag to be something like 'P_SCOTT_TREE' then everything works just fine (import/export/copy). It's having a number in the tag that is cause the problems because the export is casting it to_char and somehow throwing in an extra quote.
Thanks,
Scott

Export/import text with all styles (indesign CS3 (XP SP2))

I'm looking for the best way to export text so authors can edit their text using MS Word, Excel or xml. (they don't want to use Indesign). after they are done editting I want to import the text back into Indesign (with par, char, obj styles).
I know how to import/export to .doc with styles, but this doesn't work for table, object styles, and page breaks.
Xml tags or plugin/software might be a solution.
I've searched the forums, google and read the help file, but still don't know what the best/quickest solution might be. ... ?
thanks in advance

1. Those programs don't support every feaature of InDesign, so you are out of luck.
2. If they don't want to use InDesign, ask them to use InCopy, that is the only one programm which supports the whole InDesgin-functionlity
3. Page breaks should never be done manually, never in Word, neither with InDesign. They should be created via paragraph styles in both program, but with the import options is a checker to get Word's page breaks.

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

Export / import tablespace with all objects (datas, users, roles)

Hi, i have a problem or question to the topic export / import tablespace.
On the one hand, i have a database 10g (A) and on the other hand, a database 11g (B).
On A there is a tablespace called PRO.
Furthermore 3 Users:
PRO_Main - contains the datas - Tablespace PRO
PRO_Users1 with a role PRO_UROLE - Tablespace PRO
PRO_Users2 with a role PRO_UROLE - Tablespace PRO
Now, i want to transfer the whole tablespace PRO (included users PRO_MAIN, PRO_USER1, PRO_User2 and the role PRO_UROLE) from A to B.
On B, I 've created the user PRO_Main and the tablespace PRO.
On A , i execute following statement:
expdp PRO_Main/XXX TABLESPACES=PRO DIRECTORY=backup_datapump DUMPFILE=TSpro.dmp LOGFILE=TSpro.log
On B:
impdp PRO_Main/XXX TABLESPACES=PRO DIRECTORY=backup_datapump DUMPFILE=TSpro.dmp LOGFILE=TSpro.log
Result:
The User PRO_Main was imported with all the datas.
But i 'm missing PRO_USER1, PRO_User2 and the role PRO_UROLE...
I assume, i 've used wrong parameters in my expd and / or impdp.
It would be nice, if anybody can give me a hint.
Thanks in advance.
Best Regards,
Frank

When you do a TABLESPACE mode export by specifying just the tablespaces, then all that gets exported are the tables and their dependent objects. The users, roles, and the tablespace definitions themselves don't get exported.
When you do a SCHEMA mode export by specifying the schemas, you will get the schema definitions (if the schema running the export is privied) and all of the objects that the schema owns. The schema does not own roles or tablespace definitions.
In your case, you want to move
1. schemas - which you already created 1 on your target database
2. roles
3. everything in the tablespaces owned by multiple schemas.
There is no 1 export/import command that will do this. This is how i would do this:
1 - move the schema definitions
a. you can either create these manually or
b1. expdp schemas=<your list of schemas> include=user
b2 impdp the results from b1.
2. move the roles
expdp full=y include=role ...
remember, this will include all roles. If you want to limit what gets exported, then use:
include=role:"in ('ROLE1', 'ROLE2', ETC.)
impdo the roles just exported
3. move the user information
a. If you want to move all of the schema's objects like functions, packages, etc, then you need to use a schema mode
export
expdp user/password schemas=a,b,c ...
b. If you want to move only the objects in those tablespaces, then use the tablespace export
expdp user/password tablespaces=tbs1, tbs2, ...
c. import the dumpfile generated in step 3
impdp user/password ...
Hope this helps.
Dean

Export/import table with XMLTYPE data_type and fine_grained policy

Hi friends!
I'm trying to export a table with XMLTYPE and faine-grained policy.
Source: HP-UX - Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
Target: Linux 2.6.18-238.el5 - Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I do it thru exp/imp old utilities as mention in metalink ID 1318012.1.
One of the things that surprised me after exp/imp is that the number of objects increased:
Objects at Source:
exp \"/ as sysdba\" owner=xml log=xml file=xml.dmp
Type
Number of Objects
TYPE
431
TRIGGER
6
TABLE
17
PROCEDURE
2
LOB
120
INDEX
17
FUNCTION
1
On Target:
imp \"/ as sysdba\" file=xml.dmp fromuser=xml touser=xml log=xml.log
Type
Number of Objects
TYPE
431
TABLE
32
PROCEDURE
2
LOB
429
INDEX
478
FUNCTION
1
Why is this happening? Is it normal?
Other problem that I found is triggers are not imported, why!?!?
Thank you very much for your help!
José

Hi!
The new squema was created empty. If I run the following query:
select '10g', TABLE_NAME,COUNT(*)
from DBA_LOBS@DSN_HP
where OWNER='XML'
group by TABLE_NAME
union
select '11g', table_name,count(*)
from DBA_LOBS
where OWNER='XML'
group by TABLE_NAME
order by 2,1
As a result:
Version
Table_name
Total
10g
ACTION_TABLE
1
11g
ACTION_TABLE
1
10g
Document1767_TAB
14
11g
Document1767_TAB
13
10g
Document1852_TAB
14
11g
Document1852_TAB
13
10g
Document1941_TAB
16
11g
Document1941_TAB
15
10g
Document2016_TAB
14
11g
Document2016_TAB
13
10g
Document2087_TAB
13
11g
Document2087_TAB
12
10g
IBT_XML_RECIBIDOS
1
11g
IBT_XML_RECIBIDOS
1
10g
LINEITEM_TABLE
2
11g
LINEITEM_TABLE
2
10g
PURCHASEORDER
7
11g
PURCHASEORDER
7
10g
PurchaseOrder1145_TAB
9
11g
PurchaseOrder1145_TAB
7
10g
RICARDO
13
10g
RICARDO2
1
11g
RICARDO2
1
10g
RITNTFER
1
11g
RITNTFER
1
10g
RITNTFRE_08
13
11g
SYS_NT3+LEU6vbfGLgQ18DLgrURw==
69
11g
SYS_NT3+LEU6vffGLgQ18DLgrURw==
76
11g
SYS_NT3+LEU6vjfGLgQ18DLgrURw==
63
11g
SYS_NT3+LEU6vpfGLgQ18DLgrURw==
1
11g
SYS_NT3+LEU6vqfGLgQ18DLgrURw==
2
11g
SYS_NT3+LEU6vTfGLgQ18DLgrURw==
65
11g
SYS_NT3+LEU6vXfGLgQ18DLgrURw==
66
10g
TESTCLOB
1
11g
TESTCLOB
1
There are many new tables created...I suppose because the differences between versions...
Any ideas?
Thanks a lot!
José

How to export/import data with different nls_lang???

hello
now i try to run my forms by APPLICATION SERVER to view the forms as web forms i success but data appear unreadable that it is arabic and i use the nls WE8ISO8859P1 so i change the nls to arabic like AR8MSWIN1256 but i faild so i create new database with charset UTF8 and nls_lang is AR8MSWIN1256 and try to insert new data when i do query about data ......the new data appear readable but the old unreadable so what can i do???
i think that if i do export data and import it with new (charset and nls_lang) it will be success....but how can i do it??
thank u
regards

Hi did you already exported data from SQL SERVER? if not using SQL*LOADER you cannot export data. SQL*LOADER is only mean for importing data from flat files(usually text files) into ORACLE tables.
for importing data into oracle tables using sql*loader use below steps
1) create a sql*loader control file.
it looks like as follows
LOAD DATA
INFILE 'sample.dat'
BADFILE 'sample.bad'
DISCARDFILE 'sample.dsc'
APPEND
INTO TABLE emp
TRAILING NULLCOLS
or for sample script of control file search google.
2) at command prompt issue following
$ sqlldr test/test
enter control file=<give control file name which you create earlier>
debug any errors (if occured)

Issue with Oracle Export/Import

Hello Oracle,
I m using Oracle Import Utility to Import data .This utility, i m controlling through a C#.Net Application.
But I want to show the time estimation required to complete the Export/Import process in advance just like the windows feature when we are copying files from one place to another.
How can we get time estimation in advance to import the dump file or after analysis of dump file ?
Is Oracle providing any information regarding estimated time required to import the dump in data base.
Pls guide me.
Thanks.
Regards
Tarun

But I want to show the time estimation required to
complete the Export/Import process in advance just
like the windows feature when we are copying files
from one place to another.So you want to show the user that it will be another 10 minutes left to complete the export/import, and just when he/she thinks it is nearly complete the time to remaining is reported in some 20+ digit number? ;)
The export and import utilities do not have a method to report the time remaining to complete that I have seen.

Project duplication: Copy/Paste vs. Export/Import

Anyone have any thoughts on project duplication?
Presently I am copying a project and then pasting it into multiple new locations then renaming them. Recently I was in a training session where the instructor suggested exporting the project and then importing it claiming database size savings. Can anyone shed any insight?
Thanks in advance.

I can't imagine why an export/import would be a smaller footprint within the database than a project copy/paste. Not to mention that if you are talking about a relatively large project it can take a substantial amount of time to export and import. One of our schedules that is about 18k activities takes approximately 1.5 hours to export/import where as a project copy/paste only takes about 10 minutes. Note that we do not copy the baseline schedules when replicating projects.

Full Export/Import Errors with Queue tables and ApEx

I'm trying to take a full export of an existing database in order to build an identical copy in another database instance, but the import is failing each time and causing problems with queue tables and Apex tables.
I have used both the export utility and Data Pump (both with partial and full exports) and the same problems are occurring.
After import, queue tables in my schema are unstable. They cannot be dropped using the queue admin packages as they throw ORA-24002: QUEUE_TABLE <table> does not exist exceptions. Trying to drop the tables causes the ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables error
As a result, the schema cannot be dropped at all unless manual data dictionary clean up steps (as per metalink) are done.
The Apex import fails when creating foreign keys to WWV_FLOW_FILE_OBJECTS$PART. It creates the table ok, but for some reason the characters after the $ are missing so the referencing tables try to refer to WWV_FLOW_FILE_OBJECTS$ only.
I am exporting from Enterprise Edition 10.2.0.1 and importing into Standard edition 10.2.0.1, but we are not using any of the features not available in standard, and I doubt this would cause the issues I'm getting.
Can anyone offer any advice on how I can resolve these problems so a full import will work reliably?

Thanks for the lead!
After digging around MetaLink some more, it sounds like I'm running into Bug 5875568 (MetaLink Note:5875568.8) which is in fact related to the multibyte character set. The bug is fixed in the server patch set 10.2.0.4 or release 11.1.0.6.

Export/import masters *with* adjustments?

Hi,
I've a Mac Pro with my main Aperture installation, and a Mac Book with an Aperture installation for when I'm travelling. I would like to export masters and the adjustments from the Aperture library in the Mac Book and import them in the Aperture library in the Mac Pro.
Any advice? Aperture 2.1.

OK, I figured it out myself. Here's what I did. If you do this and manage to mess things up, it's your responsibility.
I have an external hard drive with a vault that contains the backups of the images on my Mac Book. I connected that drive to my Mac Pro. I showed the vault's contents with Finder, and similarly the Mac Pro's library contents. I copied the X.approject that contains the files I want to import/export with adjustments and other metadata from the vault to Mac Pro's library. Then I started Aperture by pressing Option/Command, and rebuilt the library.
It worked fine, I have the ratings and white balances etc. copied with the images.

Pb export/import keywords with psd file

While working with export and import of metadata, I found the following strange behavior with LR1.3.1:
0) Initial keywords
1) In LR, I modified keywords of a psd file
2) Export of metadata
3) Remove all keywords of the picture in LR
4) Then, reload of keywords.
=> I should get keywords defined at the step 1
and I always get initial keywords (step 0). It appears than something is not working as I would expect when importing, just exported data.
Any help to understand this behavior or workaround would be welcome.
Thanks all,
PH

As Curt stated, the keywords are written to the file itself and will not be cleared using the clear and import function in Keywords.
Using the clear and import option is useful if you want to get rid of the default keywords or have a better new list for import at hand. If you already have assigned some of these old keywords to files and they are not present in your current list then they will show as italic in the keyword panel (usually at the bottom under "Other keywords") once a file with this old keyword is selected in Bridge.
When a keyword is in italic then you have the option to make it again persistent in your new list using right mouse click menu or leave it as it is. Using the find option in the menu should provide you with the result of all present keywords in the files you are searching in, regardless if they are in the list or not.

Exporting/importing photos with Faces tags

I have an iMac where I keep all photos, movies, etc. and an Air. I loaded all my photos to my Air for a long flight when I tagged them all with Faces and Locations. Now I cannot move them back onto my iMac (where I want to store them for space reasons) with any of that info. Please tell me I have not wasted 8 hours.

Welcome to the Apple Discussions.
The only way to do this is with iPhoto Library Manager
Regards
TD

Copy Folder with Joins. Export/Import Folder with joins. In EUL.

Similar Messages

Maybe you are looking for