Copy frames from one movie to another in Flash 8

How do you copy frames from one movie to another in Flash 8?
I found this one, but it does not work on Flash 8.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12863
I want to copy the contents of a scene from one movie, and
then create a scene in another movie and paste it in there.

Adesi wrote:
> How do you copy frames from one movie to another in
Flash 8?
>
> I found this one, but it does not work on Flash 8.
>
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12863
>
> I want to copy the contents of a scene from one movie,
and then create a scene
> in another movie and paste it in there.
you must be doing something wrong, the above tutorial is
correct and it is the
only way to copy paste frames in flash.
Make sure your layers are not locked. Locked layers cant be
copied.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

[AS IDCS3] copy frame from one document to another doc

Hi-
I have a document with a text frame labeled "code". I want to copy that frame and paste it into another document.
How do I do that?
I am using applescript.
Thanks, Karen

I got the following information from Ray Robertson:
As of CS3, you can now do this (directed at the application):
duplicate text frame "code" of document 2 to page 1 of document 1
Or use document names if you want. In CS2, you had to resort to using the ID
commands for copy and paste.
This worked great. Karen

Can I copy clips from one project to another? The clips are still frames captured within a video event.

Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.

The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this?

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.

You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

Unable to paste frame from one animation into another

Hi, I'm currently working to make a set of GIFs. I'm using PS CS6 64-bit on a Windows 7 PC. This is my first time encountering this error. I am attempting to select a batch of frames from one animation (in the frame animation mode) then select "Copy Frames" in the drop down window of the workflow menu, then move to the other animation, which is also in frame animation mode. However, when I go to that animation's drop down menu I'm unable to select "Paste Frame" - it's grayed out. I've attempted to rest my tools and preferences, and reopened PS several times, but still can't copy and paste frames from one animation to another. (I'm still able to copy and paste frames within a single animation.) As I said, this is my first time encountering this error after making numerous GIF sets this way -- any troubleshooting tips?

That copy and paste you describe does not work in ASO -- it does in BSO. AFAIK, it has been that way forever.
Sorry, because it is a very nice bit of functionality in BSO.
Regards,
Cameron Lackpour

How can I copy songs from one iPod to another?

I received a new iPod Classic (last generation) and I'm trying to transfer my songs from my old iPod Nano (also last generation).
My iTunes library is also split up between my two parent's houses and I only have half the songs on my Nano in this computer's library.
Is there a way to copy only the songs on the +iPod Nano+ (not the iTunes library) and drop them onto the new iPod?

*Is there a way to copy only the songs on the iPod Nano (not the iTunes library) and drop them onto the new iPod?*
You can't copy directly from one iPod to another, you have to copy the songs back to iTunes and update the new iPod from there. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod

How do you copy files from one user to another

How do you copy files from one user to another user on the same machine?

open your home folder in finder move file to public, log into other account, click the go tab on the finder menu, select computer, your hard drive (Macintosh HD Default)>Users, the origonal user> public and drag that file to your specified folder.
hope it works
Craig.

What are the diffrent ways to copy data from one application to another?

Hi,
Can you guys tell me what are the different ways to copy data from one application to another application??
I know we can do it through script logic using DESTINATION_APP.
Is there any other way to copy data from one application to another application?
Please help me
Thanks,
Charly

You can also call a custom DTSX package in SSIS via the datamanager.
there are at least 5 ways of transfering data in BPC between apps.
1. Through the front end (excel etc) via evdre/evsnds
2. Through Script logic using *Dest App
3. Using BPC's standard export dtsx package via DM
4. Using SSIS using BPC's custom SSIS tasks
5. Through Script logic using stored procs.
i am sure people will come up with more.
remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

How can i copy apps from one computer to another?

how can i copy apps from one computer to another?

You don't mention which operating system you have so it's difficult to provide an answer since the mac and Windows stores the files differently.
The other thing you can do is just re-download the apps from the iTunes Store. Just login to the iTunes Store on the other computer using the same Apple ID. On the right-hand side of the iTunes Store page you will see a 'Purchased' link. Clicking on that will take you to a page that will list your past purchases which you can re-download to the new computer.

Copying value from one cursor to another

Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
            TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
            temp_cursor types.ref_cursor;
            wip_rec types.ref_cursor;
BEGIN
DECLARE
                CURSOR temp_cursor IS
            SELECT ...........
END;
BEGIN
    FOR wip_rec IN temp_cursor
    LOOP
    update tinsagr set something
    where {the condition}
        IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
        Fetch wip_rec into TransactionResultSet;
     END IF;
   END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?

There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2    rc      sys_refcursor;
3    v_ename emp.ename%TYPE;
4    v_dept emp.deptno%TYPE;
5    ---End Of Local Varriable Declaration
6    --Procedire declaration !
7    PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8      emp_rec emp_tbl;
9    BEGIN
10      /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11      with some simple modification, Here I have used implicit cursor! */
12      SELECT emp_obj(ename, deptno) --Casting as the object
13      BULK COLLECT
14        INTO emp_rec
15        FROM emp
16       WHERE deptno = 10;
17
18      dbms_output.put_line('Records selected are:');
19      FOR i in 1 .. emp_rec.COUNT LOOP
20        dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21      END LOOP;
22      --Now we are filtering the record and may be doing some operation with each record.
23      FOR i in 1 .. emp_rec.COUNT LOOP
24        IF emp_rec(i).ename = 'KING' THEN
25          --You can change this IF according to your need.
26          emp_rec.DELETE(i);
27        END IF;
28      END LOOP;
29      OPEN pi_out_ref_cur FOR
30        SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31    END TEST_CUR;
32    /* Main execution or procedure calling section*/
33 BEGIN
34    --Actual calling
35    TEST_CUR(rc);
36    dbms_output.new_line;
37    dbms_output.put_line('Now in Ref Cursor');
38    dbms_output.put_line('****************');
39    LOOP
40      FETCH rc
41        INTO v_ename, v_dept;
42      dbms_output.put_line(v_ename || '--' || v_dept);
43      EXIT WHEN rc%NOTFOUND;
44    END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL>

Copying photos from one computer to another, with descriptions

After editing photo descriptions and locations in iPhoto, it is desireable to be able to copy them to iPhoto on another computer, with the associated photo descriptions and locations. In principle, this is possible by selecting all desired photos, then selecting File -> Export... In the Export dialog box, in the "File Export" tab, select "Include: Titles and keywords", and "Include: Location information". Copy the exported files to the other computer, and do a File -> Import to Library ...
In practice, this works fine with images taken by some cameras, and not with images from others. In my limited experience with a Fuji F80EXR and a Canon SX230HS, the above work flow works with the Fuji. But, with the Canon, while the exported files clearly have the description data embedded in them (as seen by GraphicConverter), it is not imported into iPhoto, nor is it visible in Preview's Inspector. The workaround I use is to run an exiftool command on the exported files.
Exiftool is a command line utility that can read and write meta data in image files:
http://owl.phy.queensu.ca/~phil/exiftool/
I run the following command on the exported files to rewrite the IPTC Caption:
exiftool −overwrite_original_in_place -tagsfromfile %f.jpg -ext jpg -"IPTC:Caption-Abstract>IPTC:Caption-Abstract" *.jpg
Note that the above command overwrites the files that were exported from iPhoto. If you wish to leave the original files intact, with an "_original" appended to the file name, run:
exiftool -tagsfromfile %f.jpg -ext jpg -"IPTC:Caption-Abstract>IPTC:Caption-Abstract" *.jpg
I'm not sure why it is necessary to copy and rewrite that data. Perhaps there is something strange in the format of the meta data in the file as it comes from the camera, and the iPhoto export does not correct this strangeness. Copying and rewriting the data by exiftool seems to put things right.
The above works for me, but is somewhat unwieldy. Is there a better way to copy photos from one computer to another, if iPhoto refuses to import the description data that it was written to the exported files?

Thanks for the pointer. I did a test with 10 images, and confirmed the iPLM works, even with the problematic images from my Canon SX230HS.
The workflow is to use iPLM to create a new Library on the computer that has the photos you want to copy. Copy the photos to the new Library. Copy the new Library to the second computer using a method of your choice (file sharing, USB flash drive, etc). Copy the photos from the new Library to the existing iPhoto Library.
iPLM costs $20, whereas my original solution was free (but you need to invest the time to get exiftool installed and working). But, unlike exiftools, iPLM also copies over the Faces information, so it is likely a worthwhile investment if you use that feature.

How can I copy text from one card to another while creating cards using Iphoto?

I created two cards with different pictures using Iphoto on Macnotebook.
I want to use the same text message.
How can I copy text from one card to another?

select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
LN

How do I copy text from one layer to another?

I have Googled this but not a single answer seems to work.
I am using Photoshop CS4 on OS X 10.6.7.
OK, so I have a layer that has some text in it. I would like to be able to simply copy that text from one layer to another, but this seems to be impossible as the Edit Paste menu item is grayed out after I have copied it in to the clipboard. I can paste it into the SAME layer, but not into another layer.
This is how I am trying to do this.
In the layer with the text, click on the "T" icon to the left.
Click on the text, in the layer that I want to copy.
I select the text (either by clicking and dragging or pressing Command-A).
Next I press Command-C.
Then I click on the layer In the Layer Panel) where I want to paste the text.
Pressing Command-V is impossible because the Edit-Paste menu option is grayed out!!!!
WHY??????
Perhaps more importantly, HOW do I copy text from one layer to another?

First thing you can simply right click on the Text Layer and choose Duplicate Layer. But that will create a new Text Lay
er identical to the one you have.
To answer your question in your case.... Create the Text Layer. Make a New Layer. Or have the layer you want to paste into visible.
Highlight the text layer in the Layer Palette and Ctrl+Click (Win) Cmd+Click(Mac) so that you see marching ants walking around your text.
Edit>Copy.
Then highlight your Layer you want to paste into and hit Edit>Paste or Cmd+V / Ctrl+V.

HT3819 how do I copy songs from one ipod to another

How do I copy songs from one ipod to another?

Transfer the songs to iTunes and then sync to the other iPod.

How do I copy photos from one iPad to another iPad?

How do I copy photos from one ipad to another ipad without using my Mac?

https://appsto.re/us/SQ8Wv.i
This app helps you to upload easy all you photos by selecting all
to your dropbox account,
to Google Drive,
To your computer,
to another device,

Copy frames from one movie to another in Flash 8

Similar Messages

Maybe you are looking for