Copy from Time machine to an new iMac doesn't Work ?

I bought a new iMac and want to copy from time machine that is on an external disk. Copying stops after 10 minutes. What to do?

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

Similar Messages

  • HT201250 How long does it take to move 700gb from time machine to a new iMac?

    How long does it take to move 700gb from time machine to a new iMac?

    Last time I did this it took approx 2 and a half hours for 220 GB...
    That was using an External USB 2 Time Machine Hard Drive.

  • I restored from time machine and now my password doesn't work?

    I had to replace my hard drive on my iMac at work. I can login to my Mac Admin user but I can't login as my network user which is how I use my Mac 99.99% of the time. I can see that the files are there through my Mac Admin login but I can't access the files or login as my everyday user. I have gone back 7 passwords without success. What do I do?

    ...I can't login as my network user...
    I'm not sure I understand this. Are you trying to log in to a network account or to another local account? If the latter, have you tried resetting the password of that account as administrator? If it's a network account, then the network administrator should be able to help you.

  • Back up from time machine and first new tm machine back up on new mac

    hi
    i just made a back up from time machine into a new iMac...
    no i need to configure again TM for the new mac but even if i use the same TM disc the first new back up doesn't write onto the old one so I need to make a new back up from scratch... can't I keep on writing over the old one?
    thanks
    m

    Here is some of the best information you can find on Time Machine:
    Pondini's Time Machine FAQ

  • How do I restore my iPhoto library from my old macbook (stored in time machine) to my new iMac?

    I have my old macbook backed up on my time machine.  The problem is, when i enter time machine on my new iMac, I can only restore files from the current iMac's backups.  I can go to finder, and find my files under the "shared>airport time capsule" menu, but I don't know how to safely and accurately restore the iPhoto library to the current iMac's iPhoto.
    Most of the searches I did on this topic kept advising to enter time machine, find your file and hit restore, but I can not select files from my macbook's backup in time machine on the current iMac.

    Linc Davis wrote:
    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
    If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
    The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
    The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
    Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
    The next part is "Users", followed by a slash.
    Next is your (short) user name, which is also the name of your home folder.
    Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.
    This seemed to do the trick.  I found the iPhoto library file and chose restore.  The question now is where to put the iPhoto library file.

  • HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

    When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

    sohs wrote:
    When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
    If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
    Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

  • I want to restore 300 Gigs of data, saved to Time Machine, on my new iMac 27".  I want my OS on the 256G SSD, but I want all the other data (which can be separated) on the 2TB internal hard drive.  How do I do that?

    I want to restore 300 Gigs of data, saved to Time Machine, on my new iMac 27".  I want my OS on the 256G SSD, but I want all the other data (which can be separated) on the 2TB internal hard drive.  How do I do that?

    The Apple article will transfer everything from one volume to another.  Doing what you want is not simple, unfortunately. 
    See Transferring Home Folders not on a Startup volume, especially scenario #1 in the gray box there.
    That's just recently reworded and revised; please advise if it's not clear or you have problems with it.

  • HT201250 When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ?

    When migrating from time machine to my new hard drive, it migrates the first back-up I made several years ago. How can I migrate the latest back-up ? I need time machine to migrate the latest back-up. Should I delete the older back-ups ?

    As noondaywitch says, it should use the latest backup.
    Where are your backups (external HD, Time Capsule, etc.)?
    It sounds like there are two separate sets, and you're not connected to the right set.

  • I want to purchase a two terabyte external hard drive to utilise Time Machine on my new iMac....but which one? Western Digital, Time Capsule, Seagate? Any advice would be most welcome please.

    I want to purchase a two terabyte external hard drive to utilise Time Machine on my new iMac....but which one? Western Digital, Time Capsule, Seagate? Any advice would be most welcome please. Thanks Phil

    If you are looking for high quality drives and enclosures I'd recommend these 3:
    http://g-technology.com/products/g-drive.cfm
    http://www.lacie.com/us/products/product.htm?id=10330
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    I use the LaCie's, I've got three connected to my system and a 4th acting as my TM drive on my MacBook Air. Any of the above would be welcome on my desk though.

  • How to reinstall from time machine onto a new hard drive?

    how to reinstall the system from time machine to a new hard drive?

    If you are connected to the internet you can do this.
    Boot your computer and immediately hold down command, option and R  (three keys together). This gets you connected with internet recovery.
    See this article for more directions: http://support.apple.com/kb/HT4718.
    This process installs an OS on your blank drive. You can then boot from the fresh OS installation and restore from your Time Machine back up.
    Note that you cannot boot from a TM back up.

  • Restore from time machine to SSD/HDD iMac

    Hi,
    I had to erase HDD/SDD on my 2011 iMac with both SSD and HDD drives. The system was installed on the 256 GB SSD ("Macintosh HD) and the user accounts on the much larger 2 TB HDD ("Macintosh HD 2"). I was able to restore the SSD with the system, software etc. Also one smaller account that was previously on the SSD also made the cut. However, I didn't figure out how to restore also the contents to the HDD and whenever I've tried to use the Migration Assistant I was told that there is no need to restore the user accounts that were sitting on the HDD (in fact, Migration Assistant said that there is only "1 kb" to transfer). I've then tried to manually copy the user accounts from time machine (on a Time Capsule) to the HDD but I've waited for hours (my account is roughly 1 TB big) - only to get error messages about permissions. Same story happened when I tried to log into my empty user account and tried to use time machine to restore my folders.
    How is this system supposed to work in the first place? Shouldn't the user accounts on the HDD be restored 'automatically' during a restore or when using migration assistant?
    Look forward to hear from you.

    samaki wrote:
    "This user's data doesn't need to be transferred")
    That seems to mean, their home folders aren't on the OSX drive, so Migration Assistant doesn't need to (or can't) transfer them.  
    We've asked Apple to address this, but it doesn't seem real common, and would make the Assistants rather complicated, especially for newbies.
    I've tried out many things I had come to get used to from 12+ years on the Mac
    Yeah, it ends up being a bit of a conundrum.  That's why it's often best to leave the home folders on the Startup drive, but put the data on the HD. 
    I've made a note to try to find a better workaround for your situation (the Disk Utility thing is fine, space permitting).  I tried a bunch of finagles when I wrote that page, but maybe something will turn up with a fresh start.
    Retrospectively, perhaps, it was a mistake to have the time machine backup sitting on a user account specific folder on the time capsule (named after my first name) instead of the standard "Data". Both the setup assistant after flatting the drives and reinstalling 10.8 and the Migration Assistant seem to have had trouble to recognise the password protected location.
    It does complicate things. 
    For the future I'd loved to know what one could do to streamline this should the need arise again?
    What I'm thinking of is, if you still have access to the old Mac, to create default home folders on the SSD, point the accounts to them, so they can sign on.  Then either transfer directly from the old Mac, or do a backup and transfer from it.  Log on to each user account, copy the home folder, then redirect the account to that one.  Sounds promising, but there are a couple of "gotchas" there, I think.
    I'll let you know, and revise that page accordingly, if I figure something out.
    Thanks for the feedback - - it gets me thinking. 

  • How do I restore from time machine on a new macbook pro ?

    Hello,
    My Macbook pro was stollen about 2 months ago and i'm currently debating on which Macbook retina I should get, the higher 13" or the higher 15" model. In either case, how do I go about restoring the system to which my old macbook pro was at ? i.e getting the same itunes songs files, iPhoto pictures etc.
    I have read that if the version of the os x in the time machine was an earlier than that on the new machine it would cause problems. so how do can I work around that if i face this problem ?
    One last question, how can I know the space needed on the new system for the restoration from the time machine?

    The new machine will boot into Setup Assistant, and you'll be prompted to import the data from a Time Machine backup, among other options. A system-version mismatch is OK.

  • How to get my files back from time machine on a new computer

    My laptop has been stolen so i bought a new one.
    I would like to keep the clean install but also i would like to restore my files from my time machine (on a time capsule)
    How can i do that ?

    After you do a clean install, when you first boot up, Setup Assistant will open and you can restore everything from Time Machine.
    Set up a New Mac
    Migration Assistant/Set Up Assistant - Mavericks

  • Restore from time machine to a new external drive

    Hi,
    My iMac is configures as follows :
    - the internal hd contains the apps/etc
    - my home path is pointed to my external usb hard drive (/volumes/hd300gb/users/danygeller)
    Is working perfectly and time machine backs it up correctly...
    NOW, I need to replace this hard drive with a larger one 750gb.
    So, how can i restore Time machine to this new drive ? What's the procedure ?
    Thanks/Dany

    This web site might answer all of your Time machine questions:
    http://pondini.org/OSX/Home.html
    Ciao.

  • How can I input mails from time machine to my new Mac?

    I recently change to a new Apply Air, but having a hard time to find all my mails from the time machine where it usually backup all my files. I also changed from Entourage to Outloook. Please advice how I can input all my old mails.
    Thanks,
    Ivy

    06/2014 ChrisCA post: Restore iTunes library from Time Machine backup - https://discussions.apple.com/message/26104480

Maybe you are looking for

  • Doubt in BAPI - BAPI_TRANSACTION_COMMIT

    Hi Gurus, I am posting material from customer storage palce to activate storage location through the follwo\ing BAPI- BAPI_TRANSACTION_COMMIT. in that i got error as follow Material 30000004 not maintained in plant SUND Material 30000005 not maintain

  • Blue Screen (STOP: 0x00000050) when using multiple Agilent34970A devices with a single GPIB

    Hi, I am using two test fixtures that contain two Agilent34970A Multimeters and two Sorensen Power Supplies (each test fixture is contaning one Multimeter and one Sorensen Power Supply) that are connected via GPIB cables to a single PCI-GPIB card. Be

  • How do i download itunes on one computer (64-bit) for a different computer(32-bit)?

    How do I download itunes on one computer (64-bit) for a different computer (32-bit)?  The download page automatically detects my computer as 64-bit, but I want to download the installer for a different computer that is 32-bit.

  • Sample data extracts wanted

    My team is developing a custom reporting tool for the financial services industry. We are wondering if Oracle provides sample data (examples that we may see in the real world to test our reports). Does anyone know if Oracle provides sample data extra

  • Frequent index synchronization for table with a lot of data

    Hello! I have a table with text column to be indexed. There are a lot of records in the table and the texts in the text column are ofter big enough. The number of records are rising frequently and i need actual search results in any time, so i cant s