Copy function simple question

Dear all,
i need to copy values from 2008 to 2009,
from version 0 to version 1.
in my aggregation level i have equipment type and months.
when i create conditions do i have to write down all conditions.?
should i just write :
from 2008 version 0 to 2009 version 1?
or:
from 2008 version 0 January EQTYPE1 to 2009 version 1 January EQTYPE1
from 2008 version 0 February EQTYPE1 to 2009 version 1 February EQTYPE1
from 2008 version 0 March EQTYPE1 to 2009 version 1 March EQTYPE1
from 2008 version 0 April EQTYPE1 to 2009 version 1 April EQTYPE1....
thanks

Hi,
In your aggregation level you have to include year and version as well.
then include Year and Version in "Fields to be changed".
If you are having only months in one of your characteristics to denote Jan, Feb etc.. then you don't need to include that in "Fields to be changed" and in the Copy function you can simply write
"from 2008 version 0 to 2009 version 1"
but if you have year also in your month characteristic for eg. if you have taken Fiscal Year / Period to denote your months where year is also part of the key then you have to map the old values of months also to new values in the copy function by writing January 2008 to januray 2009 and consecutively for all months .
You don't need to include Equipment in "Fields to be changed"
Regards,
Deepti

Similar Messages

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Snap function in CS4 After Effect (simple Question)

Windows 7 Ultimate
After Effect CS4
Gentlemen .
A very simple question, since i am more of a Premiere person, it seems like I am stuck with this problem and the problem is
In Premiere its called "Snap" its a tool or function that automatically finds the connecting or starting or ending of a clip.
For example if I have 3 channels of video and I have many cuts, by dragging the edge of a video , it tells or shows me when they are connected
I tried to search , all I find is "Snap to Guides" which in not doing what I want .
If you need more explanation, plz let me know , else hope you can help.
Thanks.
Btw. in Premiere the Snap looks like a "Magnet"

To help you with that we need to know something about your composition settings and the settings you picked in the output module. Anything else would just be a guess. My guess is that you're using some HD footage from a non square pixel aspect ratio format and rendering to the same size. If you pick a square pixel HD format (1080 or 720 both have square pixel frame sizes in the default composition settings) and you put your HDV, DVCProHD, AVCHD, Mpeg non square footage in a square pixel comp it will fit and render out correctly.

Simple question about flex and AS 3.0

Hi, this might sound like a simple question so I apologize...
I have both a copy of flex 2 and 3, and i want to simply code in AS
3.0 not mxml. I referred to the help of both flex 2 and 3, and all
i could come up with is "you can add dynamic behavior to your
documents using actionscript", which means to me, you only write
your functions in AS and create instances with mxml (...ugh).
personally, i find mxml to be ugly (mainly because it looks like
html to me), and i'd rather not use it. coming from programming in
an IDE in Java, it seems like it would be nicer to have something
similar, all the while having the power and cool features of flash.
I'm not fully educated in this matter so i understand that i could
be totally wrong.
i mean, if i have to code in mxml, i will. i'm a web
programmer for a living, and if a more experience programmer said
something like "if you don't code mxml in flex, you'll never get a
job coding in flex", i would trust the advice, and learn the ugly
code. :)
yes, i do have Flash cs3, it's great but it seems like a pain
to me the way you organize classes.... i've only seen a few
tutorials, ones that explain how you cannot simply import a custom
class, you have tell your movie to link to it, put it in the same
directory, or manually name the package, it's sort of confusing.
my main point here is that i'm very eager to start building
apps in straight AS 3.0 instead of using flash cs3 (for some
projects), and it would be cool to get some help or be pointed in
the right direction.
to simplify:
can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
you link me to a tutorial? any advise?
thanks!

Hey William, thanks for the post. It's a great coincidence
because I'm reading that book as well. I'm about half way through
it, and I love it. I installed mxmlc on my linux box and am writing
pure AS 3 apps. I think that's the way to go, though I know it's
not for everybody.
My problem with mxml is that it has a weird syntax for
function calls, and it's not as 'intuitive' for a person like me,
who came from C++ and Java programming in the past. I like writing
programs in the C++ and Java style syntax, and since so many other
languages use a similar syntax, I don't see any reason to learn the
nuances of mxml, unless I was getting paid to do it. As far as I
can tell there is no benefit.
I hate using Flash to write flash apps as well, I feel like
they become messy and confusing, especially when trying to write an
OOP application. I only use it if I want to move an object in a
very specific way and can't do it with the Tween methods.

Need Help Troubleshooting Copy Function

When I try to copy a page using the flatbed scanner, the printer will scan the page and act like it's going to perform the copy. However, after about 20 seconds, the printer spits out a blank page and on the touchscreen, it says "Printing canceled." (I did NOT touch anything on the printer to cancel the Copy request.) After that, the printer never recovers, i.e. it hangs on the "printing canceled" message. I end up powering the printer off, waiting a few seconds, powering it back on, and trying to copy the page again. Thankfully, the copy function performs as expected, no problem.
This process occurs every time I try to copy something, and I think it's silly to believe that I need to power my printer off then turn it back on every time I want to copy something. My settings are very simple: Make one copy, 1-to-1 sided, black ink.
Any help in trying to figure out why my printer does this, or how to make it work properly on the first attempt, would be appreciated.

Hello mamacgl,
Welcome to the HP Forums.
I see that you are having some copy issues.
I have seen this issue in the past and I was able to get it resolved by doing one simple step.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is powered back on, use the on/off button to do a proper power cycle. This will do a semi power reset on the printer.
Try another copy and let me know if you still have issues or if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Item Conversion Template Issue for Oracle Migration - Copy functionality

Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PM

Issue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi

Copy function for sales order

I want to create a sales return, and use copy with reference to do that. But if the sales order items cate is TAB, then those items cannot be copied, I check the config dosen't find the TAB item for order type, even in the standard, RE to OR, I question that whehter is not make sense to copy TAB items. Anyone try add TAB item to copy function? Thanks!

Use T-Code - VTAF (IMG - Sales and Distribution - Sales - Maintain Copy Control for Sales Documents - Copying Control: Billing Document to Sales Document
Here select your Invoice Type & Sales Returns Documents type & double click in Item on left hand side. You will list of available items & you can also add new Items here.
Hope this helps...
Thanks,
Jignesh Mehta

Copy function not working in nw2004s-ip

Hi,
I am using NW2004s BI-Integrated Planning. I am using the Planning Modeler tool.
I am trying to create a copy function to copy actual data from 2006 to become plan data for 2007.
There are no variables involved. I have specified the infoprovider, fiscal year/period and value type for reporting.
The copy function reads as:
FROM :
Fiscal year / period: 001.2006; InfoProvider: CO-OM-CCA: Costs and Allocations; Value Type for Reporting: Actual
TO:
Fiscal year / period: 001.2007; InfoProvider: Plan Data; Value Type for Reporting: Plan
The fiscal year/period value chosen in both cases is a V3 variant.
I get the same error message every time
" Inconsistent time characteristics: 0FISCPER,V3/001.2007 and 0FISCYEAR,V3/2006"
Ultimately I want to copy to all periods of 2006 to 2007, but to get something working would be nice!
What am I doing wrong?
Any suggestions gratefully received (and points given).

Hi Dave,
We are experiencing the same problem. We've just implemented BW-IP and we are trying to configure through the Modeler a simple copy function from 0cca_c11 to a transactional InfoCube with plan data. Also changing characteristics as: 0fiscyear, 0vtype, 0version and nothing else, both InfoCubes are selected in the filter area, and I think the Multiprovider that we've created in BW is ok. Everything seems to be so straight forward but .. .nothing is working (we had this working in the previous BW-BPS).
Can someone give us a hint of what we may be doing wrong, or a kind of checklist of the things that we have to validate so as to be sure to get this working.?
(tips about the multiprovider in bw? , tips about the filter options?, tips aobut the copy function parameters?)
Regards,
Andrea.

Simple question .... how to add photos to the body of my EMAILS -Found 1000 results for How do I add photos to my emails for Thunderbird

Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.

First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

A very very very simple question

Hi guys,
I have a very simple question and standard but I cant find anywhere...
I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
(dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
can you help me this?

Hi Jose
Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
Thanks
Ravi Jegga

No reference data for copy function between two infoproviders

Hello,
I am trying to copy data from an actuals cube into a plan cube. Both cubes are assigned to the same multi provider.
The planning function is defined as follows:
Characteristics to be changed: InfoProvider (from: Actual; to: Plan)
Condistions: none
To keep it simple I am using a filter with no entries.
When I am executing the copy function with a trace I find that the function reads the entries from the Plan Cube (which I expected) but it does not generate the entries that are available in the Actuals Cube in the plan cube (which I hoped it would do). It seems that the function cannot find any reference values in the Actuals cube.
The structure of the two cubes is different. Could this be the reason that the copy function does not work?
I will appreciate any hints.
Cheers,
Sven

Hi,
The structure of the cubes being different is not a problem. Anyway, the records get aggregated depending on the characteristics you have included in the aggregation level on which the copy function is created. Because you say not even one record is getting copied from the actuals cube I feel there is some basic problem. Check the below things (some might sound very basic but I am just noting them)
1) Actual cube has data in an active request with green status
2) You have identified the characteristics and key figures properly in the multiprov (on which the aggregation level is built) from both the cubes.
3) In the copy function, you have selected the desired KFs to be copied.

BPC 5x - bad performance of standard copy function

Hi,
when applying the standard copy function in BPC 5x, it takes 1 min 30 seconds to just copy 2500 records ... we are still in the development phase of the project, but fear performance when copying real live production data ...
in the formula log, we can see 95% of the time goes to running the SQL query:
Total Time to build queries = 0,1 sec
Total Time to run queries = 77,5 sec
time to post records = 1,5 sec
Is this normal behaviour?
D
I investigated further, and apperantly it is caused by the following simple script in the default logic:
#PL100=(PL010_QTYPL100_UR)-1
#PL200=(PL010_QTYPL200_UR)-1
#PL210=(PL010_QTYPL210_UR)-1
#PL220=(PL010_QTYPL220_UR)-1
Why is this piece of coding causing so much performance problems ... If we put this in comment, the copy only takes a couple of seconds ...
D
Edited by: Dries Paesmans on Jan 24, 2009 11:26 PM

Hi D
These calculation statements get their data from the database. So it will create a query or some queries for that.
#PL100=(PL010_QTYPL100_UR)-1
#PL200=(PL010_QTYPL200_UR)-1
#PL210=(PL010_QTYPL210_UR)-1
#PL220=(PL010_QTYPL220_UR)-1
Since you put them in Default Script, for every single data update/send, BPC is going to execute the the content of the Default Script.
If you don't have the need, you can move the statements out from the Default Script, put them in other script logic and run it on demand.
Otherwise, you need a powerful and optimum database server to serve the queries faster.
Best regards,
Halomoan

Simple question - which HD to chose?

Hi everybody,
I have a really simple question, I am about to buy an external HD, my doubt is: do any HD work with TimeMachine in order to use it for my backups?

Pondini wrote:
Noiseboy2006 wrote:
Steer clear of Seagate FreeAgent drives, they have hardware controlled sleep functions that can't be set on a Mac and its bloody annoying to have to wait for them the wake up all the time.
Not necessarily. I have one (in the "Pro" line) without any such problem.
With many drives, if you completely erase and reformat it, without loading any of the software that comes with it, those problems are unlikely.
Some will respond to the +Put the hard disk(s) to sleep . . .+ option in System Preferences > Energy Saver, some don't.
Some WDs, however, come with "spin down" programming that's near-impossible to remove.
Well it was certainly the case on 3 FreeAgent drives that I know of, and it was a well known problem that Seagate did nothing about. The drives would spin-down after a short time and cause a fairly long delay anytime drive access was needed.This was a hardware issue and nothing to do with the disk format. seagate provided drive manager software for Windows but not Mac.
I suppose the issue has been resolved in later drives but the point is not to assume that any old external drive is suitable for use with OS X.

Flash cs3 simple question

I know this is a very simple question, but i just dont know
what im doing wrong
Im trying to add a script on a movie clip, but everytime i
click on the movie clip then click on the actions i get a message
"Current selection cannot have actions applied to it"
I have done everything i can think of to add script to the
movie clip.

"old way of programming buttons will work!"
However, this is not the preferred way to add actions to
symbols.. You should get into the habit of doing it correctly. You
code will be more organized, and can make performance increase. If
you want to use AS2, I strongly suggest attaching your actions to
the frame. It is very simple, and a much better practice.. give
your symbol an instance name and attach this to a frame.
instancename.onRelease = function(){
trace("I've been clicked");
using on(release) and such, is outdated and not good practice
for you for the future. Why revert to the old bad habits, when you
can learn the new, and future of programming in AS

The copy function doesn't work for years

Hi experts,
i have a copy function for copying a combination of version, vtype and fiscyear in another combination e.g.
version = 0, vtype = 10 and fiscyear = 2010 should be copied to version = 101, vtype = 60 and fiscyear = 2011
As far as the year doesn't change the function works for example with the same combination as before just from
fiscyear = 2010 to fiscyear = 2010 but when i try to copy from 2010 to 2011 no data will be generated.
The interesting thing is that i have all the TO-Variables for version, vtype and fiscyear in the filter and all of these char.
are selected as to changed char. in the planning function. I defined all the From-variables version-from, vtype-from and
fiscyear-from in the from part of function and the TO-variables as version-to, vtype-to and fiscyear-to in the TO-Part of the function.
Has anyone an idea why it's not working for different years?
Thank you all in advance.
Kind regards,
Ansarial

Hi Cornelia,
i tried to change the fiscper too within the copy planning function and i had to work with exit variables to derive the fiscper from the fiscyear dependent on the year inputted by user. But in order to copy every periode i had to use the offset function which has not worked. I don't know why. I want to go for your proposal so i had some questions:
- if i want to create a char. relationship with fiscyear and fiscper3 as source fields and fiscper as target field i get an error message at checking the char. relationship that tells me that it is an inconsistency and it is not possible to FISCYEAR FISCPER3
-> FISCPER. So what to do?
I created the class and write my ABAP in the derive methode but the relationship doesn't seem to work.
Do you know all the steps i have to do to derive fiscper from the other two for my copy function?
I would be very appreciate it.
Thanks and regards,
Ali

Copy function simple question

Similar Messages

Maybe you are looking for