Copy HR Standard Form for Payslip
Hi, I had copy the SAP_Payslip HRFORM to ZSAP_Payslip_MY. After I copy and activate, there is an error occur in the smartform - wa_result-interiod_oc_key not found. Then,I had replace the wa_result-interiod_oc_key to wa_result-interiod_key. So the error has solve.
Next, there come an error in print program. There is CL_HR_PAY_RESULT_MY not found. So, I create the CL_HR_PAY_RESULT_MY by copying CL_HR_PAY_RESULT_JP to it. I had do some modification on the natio attributes to paymy_national.
After all this done, I run my print program, the payroll result is nothing and nothing show in my smartform except the title. Why the print program cant retrieve the payroll result? Is there any alternative to do my own payslip? Thanks.
hi Likim,
I am also having the same requirement over here.. for India payroll
I have did the changes in Smartform and its been activated.
Next, when creating the print program. There is CL_HR_PAY_RESULT_IN not found error have come.
and i ur conversation u have specified u have copied and created a new CL_HR_PAY_RESULT_MY, can u plz guide me how did u do that.. ?
Thanks in advance
Regards
Similar Messages
-
Standard form for ECS in FI module.....?
Hi all,
Please provide if there is a standard form for Electronic clearing system(ECS) in FI and the corresponding print program...
thanksHi,
as per your requirement Tcode -VA21 standard script name is RVORDER01 if u want change as per your requirement copy it as Zform then modify it . and according to ur printform give name in NACE Tcode ...
<REMOVED BY MODERATOR>
thanks,
Suresh.
Edited by: sriratna nainala on Feb 15, 2008 4:12 PM
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 2:55 PM -
Standard Form for Customer Quotation in PS
Hi All,
Can anybody tell me Standard Form for Customer Quotation in Project System (PS).
Its Urgent.
Regards,
Sachin Bhatnagar.Hi,
as per your requirement Tcode -VA21 standard script name is RVORDER01 if u want change as per your requirement copy it as Zform then modify it . and according to ur printform give name in NACE Tcode ...
<REMOVED BY MODERATOR>
thanks,
Suresh.
Edited by: sriratna nainala on Feb 15, 2008 4:12 PM
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 2:55 PM -
Modifying the format of standard form for transaction PP40
Hello gurus,
I want to modify the format of the standard form HR_ALL_BUCH for training and event management section of HR. For this i know that i have to copy the standard form into a z-form. So i copied the form and named it as ZH_ALL_BUCH. Now i am able to change the contents of the mail but i cannot reposition the windows. The section where we put the height and width of window is looking grayout even if i open th form in change mode. How can i reposition the windows?
Regards,
Yayati EkboteHello,
I solved my problem myself. The original form was in german language. so while opening the form in change mode, the language of the form should have been 'DE' and not 'EN'. So i set the language as 'DE' and the form windows were repositionable. Thanks.
Regards,
Yayati Ekbote -
Standard prgram and the standard form for the AR Bill of Exchange
I need to configure AR Program for Bank bills and Bill of Exchange. This configuration is for France.
Can you let me knoe the standard prgram and the standard form for the same.
Regards,
SenthilHello,
You can refer to the below sap help link whcih describes about the Bill of exchange understanding in sap
http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FI-AP-AP-BE.pdf
http://help.sap.com/saphelp_45b/helpdata/de/e8/f0c10a0a6911d294f200a0c929f4c9/frameset.htm
Alternatively you can also check the customizing settings for the BOE which details on the settings needed foractivating of BOE
hope this helps
regards,
radhika -
Hi friends,
Can anybody give me the name of the standard form for printing quotation??
Thanks in advance.Dear,
There is no standard transaction code for quotation printing.
we can get the print through va22 or Va23, from menu bar------->select sales document-> issue output to.
You want mass printing , go through Z-Development.
Thanks
Narasimha -
Standard Form for Service order.
Can any1 suggest me which standard form for service order?
otherwise should I go for New one? pls guide me..If it is PM module then no need to go for that long path you can configure it in the OID1 transaction .
If it is PM module you cant develop smartform you need to go for script only.
As Wing mentioned try PM_COMMON script . Even I have worked on PM module but developed my own form
Regards,
Nageswar -
Standard form for payment order creation
Hi,
I got a requiremnt to create a form for payment order creation,
can one plzzz guide me, do v hav any standard form available in sap, n also let me know the program for it.
Regards
ashwiniHi Aswini,
FPY1_CH_DTA_EZAG
FPY1_CH_DTA_LSV
FPY1_DE_DTA
FPY1_DE_DTA
FPY1_DE_DTAZV
FPY1_DE_DTA_ZZV
FPY1_DE_DTA_ZZV
FPY1_DE_EURO
FPY1_DE_EURO
FPY1_FR_BANQUE
FPY1_NL_DTA
FPY1_NL_DTA
FPY1_NZ_MTS
FPY1_NZ_MTS
check these forms
Regards,
Venkat -
How to use copy of standard program for direct input in LSMW
currently we're using object 0085 Purchase Orders and and method 0001 for standard direct input, which is processed with program RM06EEI0
now I want to set an additional flag and avoid creating it by means of BUS PurchaseOrder.CreateFromData1 method (coz the structure is quite different and more complex).
so my question is now how can i assign a copy of the standard program for processing?
for better understanding I've attached a screenshot of the according screen
[img]http://img71.imageshack.us/img71/1558/lsmwcr6.jpg[/img]ok, solution was to maintain table SXDA1 (SAPDXfer: Data Transfer Objects and Sub-Category).
modify entries for DXPRG, DXPR1 and LOADPRG with custom program names -
Standard form for printing production order
hi experts,
i need the standard script for printing production order.Hi
Check out this Forms
PSFC_DOC_LINKS Print production order
PSFC_PRINT_LAY Production order printing
WE_FERT_VERS2 GR slip for production order
Reward Points if it is Useful.
Thanks,
Manjunath MS -
Global Variables passing from standard form for use on custom form
Hi,
I'm trying to grab a value from a standard form, and pass it to a new custom form, which I am opening automatically from the standard form via personalizations. Is anyone aware of a way to send a value from one form to another? I was going to try using a global variable, which it looks like you can set through personalization. I tried doing it by passing the value as a form parameter, which works if I hard code a value, but it doesn't work if I refer to a value from the standard form.in your E-Business-environment may exist some special codings, which you have to think of, when passing parameters through the application.
Copy the question to your EBS-Forum. They know ways using personalization and passing parameters -
Hello Everyone,
1) Iam New to Interactive forms by Adobe.I want to use this for SAP Engineering Change Management Process.
I heard that there will be a standard form available in Out of the Box SAP.
Can someone guide where can i find the Standard form in SAP system.
2) In Configuration side(Tcode spro) for Engineering Change Management where do i need to configure to activate these forms.
3) What are the system prerequisites(Any specific Licensing required) to use Adobe forms.
Any information related to this or any suitable links where i can get relevant information will be appreciated.
Regards,
Praveen.Hi Praveen...
First You have to Install this...
prerequisites to use Adobe Forms in SAP
Configuration
SAP NetWeaver 6.40
Java Stack installed
Adobe Document Services (ADS) installed on the Java Stack
Adobe LiveCycle Designer 7.1 is installed on your machine ( Desktop / Laptop)
Adobe Reader 7.* is installed
Transactions in SAP Engineering Change Management
CC01 Create change Master.
CC02 Change change Master.
CC03 Display change Master.
CC22 Change Object Mgmt Record: Initial Screen
CC23 Display Object Mgmt Record: Initial Screen
CC11 Create Material Revision Level
CC12 Change Material Revision Level
CC13 Display Material Revision Level
CC15 Change Document Revision Level
CC16 Display Document Revision Level
CC31 Create change request.
CC32 Change change request.
CC33 Display change request.
CCUNDO Undo changes with Engineering Change Management ( Available from SAP ECC 6.0)
CC07 Engineering Change Management Information System
CC05 Change Overview
CC60 Change Hierarchy
DSAL Log for Digital Signature -
Standard forms for printing Appointment/Offer Letters
Hi All,
We have a requirement where we need to develop forms for printing Appointment Letters to employees.
Are there any standard forms/scripts available in SAP for this kind of requirements?
Regards
PavanClosed.
-
Add Logo in HR Forms for payslip
Hi Experts,
I need to inculde logo in HR froms, my consultant suggested that copy the satandart HR form and create a Z-form.
i dont have that much idea on HR Forms, is it possible to include the logo in HR Forms?
Based upon the input given by the user the logo should change dynamically.
Client has many companies, but they are having common payroll so when they are running the payslip based upon the company the logo should print.
could any one please suggest how to so this?
With Regards,
ThaneshHi Thanesh,
There are two possibilities either create a 'Z' one or go through standard one. I prefer you to try the standard one.
Have a look on this link.
[Add logo in PE51;
Hope this will solve your problem.
Regards,
Gaurav -
Question: using links in report to copy data into form for update
Hi there,
I have a report that selects data from one a table, and i want to populate a form to update the report info and more info that a user will enter into another table. With alot of help I have managed to get the first 3 column fields across by editing the report link, under report attributes -> column link. The values of Item 1 to Item 3 work fine, but how do i get the rest of the info in the other 5 columns across??
regardsI think you're trying to reinvent the htmldb wheel.
Have you tried looking at the wizards that help you do this?
Anyway, as an example, to populate the form using the pk
1: create your items on the page, including the PK
eg P2_EMPNO (PK), P2_ENAME, P2_SAL,P2_DEPTNO
2: create a page process "on load" that runs if the PK item is not null
begin
select ename,sal,deptno
into :P2_ENAME,P2_SAL,P2_DEPNTO
from emp
where empno = :P2_EMPNO
end;
3: You now need to write a process that does an update
after submit
begin
update emp
set ename = :P2_ENAME,
sal = P2_SAL,
deptno = :P2_DEPTNO
where empno = :P2_EMPNO;
end
You need to consider how to handle new rows, optimistic locking and a few other things.
I would suggest that you have a look at the existing form wizard that does all this for you. We can then work around any "limitations" you find.
Chris
Maybe you are looking for
-
Log 4 j error in struts 1.2.8
I am using struts1.2.8 with hibernate 3. I am getting below error. Is there any solution for this problem ? private DailyRollingFileAppender cAeroAppender; java.util.Calendar cal=java.util.Calendar.getInstance(); // getting calendar instance
-
T440s & Windows 7 in UEFI mode
Hi, I try to install Windows 7 on my T440s. However, I fail booting the USB stick with error code 0xc000000d ("An error occurred while attempting to read the boot configuration data"). I created the USB stick as described in the Forum here (http://f
-
My PowerPC Mac recently broke and I've had to replace it with a new Intel Mac but my copy of CS2 Photoshop won't instal as it says it's not supported. What do I have to do to be able to use my software again?
-
Hi All, Please give me ur inputs on this scenario: <b>Scenario:</b> FileXI- ECC - Data from File is converted to various IDocs and posted in SAP. (No BPM used) <b>Problem:</b> <i>Exception Handling</i> > > We want a message back from SAP s
-
Hi all I am having some problems with the content search. Please help me with this: In iFS, a new document type "MWORLDTYPE" (sub type of DOCUMENT class) is created. I am using SimpleXmlParser to load xml files and convert them into mworldType docume