Copy iCal settings
I am running OS X 10.6.8 on my new iMac. Need to copy from Mac OS X 10.4.9.
I want to copy my iCal settings from one compter to another in case the old one dies. I copied the settings from the old computer. Where do I find the iCal settings in OS X 10.6.8? I want to copy them elsewhere in case there is a problem and then I want to replace them with my settings from the other compyuter. I looked at the location below, which is where I found the others on the old compuuter. and don't see them.
/Users/YourUserName/Library/Application Support/iCal/
Thanks for your help.
Rufus9,
Are both computers running Tiger?
If these two computers have the same version of OS X, the calendar source information that you are looking for will be located in ~Library/Application Support/iCal/Sources.
The fact that your help instructions point to ~/Library/Calendars/ indicates to me that one of the computers may be running Panther.
Further details will give you a better response. I cannot verify if a drag and drop will work if you have two different systems.
I also do not know if the iCal>File>Back up Database/Revert to Database Backup feature will work under those circumstances.
In any event make sure that you have a safe/useable backup before attempting to move anything back and forth.
;~)
Similar Messages
-
Can i copy my settings from one mac to another?
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS. -
STO Process Copy control settings
Dear Gurus,
I am having issues with item number in purchase order and delivery document. I require the same item numbers in purchase order to be copied to delivery document. I think i got to do something with copy control settings. Please help me. I am confused since its an STO process.
Thanks in advanceHi George,
Here customization can be done as follows:
Step 1: SPRO --> MM --> Purchasing --> PO --> Set up STO
In this step the customer number and sales area is assigned to Supplying & Delivering plants.
Step 2: SPRO --> Logistics Execution --> Shipping --> Delivery --> Copy control --> Specify Copy control for Deliveries
Check the settings made for DL to NL (STO) and DL to NLCC (Cross company) copy control settings.
Step 3: T.Code OVLK
The Delivery document types NL and NLCC needs to be assigned with "B" in the order required field. Thus, the system understands the data for delivery document has to be copied from Purchase order.
Thanks & Regards,
Sharan -
I have an iCal settings problem. I simply cannot change the format to 12 hours. I have repeatedly set the system to 12 hours and that works fine. I have re launched iCal several times to no avail. Running system 10.6.7 and iCal is 4.0.4. Any ideas? Thanks. Geoff.
iCal takes its format from System Preferences>Language& Text>Formats.
Click on the 'Customize' button for 'Time' and set as here:
Then drag the 'PM' button in the 'Time Elements' section to after the short time - though when I tried this it didn't appear in iCal. You may need to experiment a bit. -
"Copy Form Settings" in Users-Setup
Hi
Could somebody shed some light on the Copy From Settings function in Users-Setup?
How to select source and how to select target user?
The one currently logged on as well as the one selected are greyed out ... I'm not getting it how to use this.
Thanks
FranzHi Franz,
Please check out SAP Note No. 1369613 which explains the steps regarding the 'Copy Form Settings'.
Hope it helps.
Kind Regards,
Jitin
SAP Business One Forum Team -
Copy control settings for Multilevel variant configuration
Dear All,
I have the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
with reference to this quoatation a sales order is created.
My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
In copy control settings there is a field at item level called
configuration :
In this if I maintain value
A: The variant is getting copied but the values for subitems is not getting copied the values for main material is in changable mode.
B: The variant is getting copied but the values for subitems is not getting copied the values for main material are not in changable mode.
C:The variant is getting copied the values for subitems is getting copied the values for main material are in changable mode but the values for subitems are not in changable mode.
My requiremnt is that
The variant must get copied
the values for subitems must get copied
the main material vlaues must be in changable mode
the subitems vlaues must be in changable mode
How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
Informative answers will be provided maximum points.
DeepakHai Deepak Mehmi,
please check in T CODE VTAA
In the position check
SalesDocType : Sales order type
SalesDocType : Inquiry type
Double clcik and check
DataT 051 General header data Copying requirements 002 Header-diff.customer
DataT 101 Header business data
DataT 001 Partner header
And Tick mark for Copy Item Number
For further check:
In Item
Copying requirements 301
DataT 151 General item data Pos./neg. quantity +
Copy quantity
DataT 102 Bus.data/item compl. Pricing type G
DataT 002 Partner item 2 Update document flow Cont. item copy mode
Copy product select.
FPLA 251 Conditions Configuration
Campaign Deter.
Regards,
Mani -
Copy control Settings from a Quotaion to Value contract/Quantity Contract
Hello Friends,
I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
Thanks and Regards
Mohammed Roshanif you run VTAA you would try to create a copy control as follows:
source: QT (quotation)
target: CQ (quantity contract)
say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
save it and test.
good luck! -
VTFL copy control settings not visible
hi
i am facing some problem in copy control settings - vtfl - delivery to billing type copy control
when i am doing the required settings i.e copying ZLLZ delivery to ZFD billing type and saving the settings, a transport request is being generated and also it says tht data has been saved,but when i see the list i cannot see the new copy control tht i did.
i can see these entries in the table TVCPF. but these entries shows billing type ZFD n delivery type ZLLZ
along with additional entry in sales doc column as "ED"
i am not able to understand from where this entry is being picked...
an why i cant see the entries at VTFL
can anyone help.Hi friend,
Please try to check you documents in transaction code VTFL by giving the Billing document (first) and the delivery document.
Definitely you can find the combination
And for your another question , In the table TVCPF you can see the sales document type ED which would have maintained in the VTAF copy controls from the Sales document to Billing documents
Please let me know if you have further queries.
santosh -
Basic Difference: Copy Control Settings
Dear All,
I have got confused over Copy Control Settings b/w
VTFA & VTFL.
Please help me to understand the both (with differences).
Best Regards,
Amit.Hi
VTFA is order to billing copy controls
that is in order's item category the billing relevence will be order related billing like cash sales , return order etc
Means your sales order is referrered for billing
VTFL is Delivety to billing copy controls
that is in your order's item category the billing relevence will be delivery related billing like standard order, rush sales etc
Means your delivery document is referred for billing
Hooe it calrifies
Regards
Raja
Edited by: ramanathan raja on Sep 15, 2008 4:33 PM -
How to copy default settings to all user ?
Dear Expert
I want to set for all users have same default settings (default form layout)
is there any way to copy default settings from 1 user to another users ?
really appreciate your help
thank you
Best Regards
JeiMingHi,
If am understood, I hope you are expect the authorization copy.
Procedure
1. In the Administration --> System Initialization --> Authorizations window, choose the name of the user whose authorizations are to be copied. Hold the mouse button until a rectangle appears around the user name.
2. Drag the rectangle to the name of the user to whom to grant the authorizations.
3. Release the mouse button.
4. A system message prompts for confirmation of the copy operation.
5. Choose OK to confirm the operation. The authorizations are copied completely to the second user.
Thanks & Regards,
Venkatesan G. -
Copy control settings needed for order related billing
hi,
sap gurus,
please provide the copy control settings related order related billilng and order related proforma invoice.
thanks in advance
regards,
balaji.tDear,
1 )Use TCODE -- VTFA and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
and maintain as suggested above.
At Header Level -- COPYING REQUIREMENT (001)
At ITEM Level-- COPYING REQUIREMENT (001)
DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
2) Use TCODE -- VTFA and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED PROFARMA BILLING in similar way u can maintain for ur Z Documents
At Header Level -- COPYING REQUIREMENT (007)
At ITEM Level-- COPYING REQUIREMENT (008)
DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
need further help revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U -
Hello everyone.
Photoshop CS6 on macbook retina. I had tried to copy develop settings from my .NEF file but received error message : Camera Raw editing is not enabled - Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature.
How I can fix it ?Use the Adobe Cleaner Tool but first back up important files and read the instructions carefully.
Try this link for the cleaner tool:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -
Copy/Paste settings always includes lens corrections even if not ticked? (LR3)
I'm having trouble with copy/paste settings on LR3, in that whenever I copy settings and paste them onto other images, the settings for the Lense Corrections section are always transferred, even though they were not ticked in the copy settings dialog. Can anyone else confirm this is a bug or am I doing something wrong?
Edit: Should have mentioned, LR 3.0, Mac OSX 10.6.4, iMac i7.
Thanks,
DavidI CANNOT reproduce that.
Do you have the lens correction box unchecked? or do you just have the four boxes under that hierarchy unchecked?
Mac OS X 10.6.4 -
In Final Cut Pro 7 it was easy to copy audio settings, in FCPX I found no possibility to do this...
I have to adjust 500 clips with -4 db ... and idea how to do this without adjusting every single clip?Fantastically simple in X!
Select all the clips in Event browser (you can enable Show waveforms in the Clip appearance, it
will illustrate the level change on the clips) open the inspector and select audio.
Adjust the Volume slider -4dB and all clips will be adjusted.
If they're in the timeline already, select all the clips and CTRL & -
Four times will give the -4dB drop you need -
Hi.
Is there a way to copy channel settings within a project or between projects? I do not want to copy the entire track (I know that can be done). I just want to apply the effects inserts that I have on one channel to another channel (preferably in a different project). I know this can be done in Logic, so it seems reasonable that Soundtrack Pro would be able to do this, but I haven't figured out how (and I have checked the manual).
Thanks,
MarkYou can save & re-use (all) settings of one effect by clicking the 'show presets' knob in the lower-right corner of the effect-popup you want to copy. Then, click '+' in the lower left corner of the popup, and enter a new name for the setting.
When re-using the effect on another channel, click 'show presets' again, and select the user preset you created earlier.
If you automated effect parameters (with envelope points), you can copy & paste by selecting this knob:
+(Selecting and Moving Envelope Points with Clips+ / p. 371 of the manual)
Maybe you are looking for
-
No Plant is assigned to Vendor 200002
Hi I have got a message while creating a Purchase Order as below. What might be the actual problem. And also give me the explaintion of Cross-System flow of Goods No plant is assigned to vendor 200002 Message no. AIPLOC002 Diagnosis You have tried to
-
http://indianvisa-bangladesh.nic.in/visa/indianVisaRegDetails.jsp; this is page link. I want to stay in this page for a long time but i can't, they show me a message "session expired". Also I set an add-on namely Session Keeper but don't implement it
-
Standard function for settlement period
Hello Does someone knows if there is a standard function that could define the settlement period based on a date (DD.MM.YYYY)? The aim of this is to use it in report RKO7CO88 thanks to a link with table TVAR because we would like to run in background
-
Commit and changes in database
Hi, If someone makes an sql request but without commiting at the end, what happens exactly with the databuffer blocks. Is the DBWR works for these datas? I see a few people working with the oracle express 10 g version: their post is both client and s
-
[svn:fx-trunk] 11602: Fix for Button tooltips.
Revision: 11602 Author: [email protected] Date: 2009-11-09 22:35:11 -0800 (Mon, 09 Nov 2009) Log Message: Fix for Button tooltips. TextBase dispatches an event when _isTruncated is set through the setIsTruncated() function. This allows ButtonBa