Copy inspection results not working
Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaX
Go through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf
Similar Messages
-
Operation confirmation without inspection results - not working
Hi All,
We have 4 operations for one production order.
1st operation has 5 MICs
2nd operation - no MICs
3rd operation - no MICs
4th operation - 1 MIC.
In tcode OPK4 I have configured error message if QM results are not recorded.
Before result recording I tried to do 1st operation confirmation (tcode CO11n). I got error QM data for operation missing (as expected).
Now for the first operation (having 5 MICs), I have recorded values for only 1 MIC (out of 5). Then it is not giving error for 1st operation confirmation.
Our requirement is- all 5 MICs must be recorded for operation confirmation.
How to handle this. Please Help.
Thanks & regardsThe configuration setting you have made doesn't give error message during confirmation even when one of the MIC assigned to one Operation is recorded and remaining MIC's assigned are not recorded.
Hence we can use User Exit during Confirmation screen and do the necessary coding to throw a error message if RR is not done.
Best Regards,
K. Raghavendra Nayak -
Copy Inspection Results of one lot to other lots at a time
Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out -
Copying Inspection results from inspection lot.
Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar MokashiHi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM -
Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM -
SAP QM Result recording - Copy inspection results functionality
Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
ManoharHello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle -
Error during copying inspection result.
Hi All,
While recording result with the Inspection plan where I had done settings to copy inspection result from another lot I got the error message;;;;
Message Text
No active implementation exists for BAdI QEC_SELECTION, procedure
Technical Data
Message type__________ E (Error)
Message class_________ QECOPY (QM Data Transfer to an Inspection Lot)
Message number________ 016
Message variable 1____ QEC_SELECTION
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 1 (very important)
Sort criterion________
Number________________ 1
Pls guide me how do I activate this BADi
Regards,
Shyamal JoshiHI all,
I think I will not get any response over it so closing the thread to contribute in new rule of engagement.
Regards,
Shyamal -
Dear Friends ,
I have configured for Quality certificate.
At the time of delivery , the system will create an inspection lot.
To make delivery we need to carry out RR and UD once again.
Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection type 04 .
Thanks in advance.HI Dear,
As you said , it is for COA.
And the materials are not batch manged.
Is there any possibility of copying the results of 04 inspection lot to inspection type 10 lot , which is created at the time of PGI.
Because untill and unless RR and UD is made sales people will be not able to make the delivery . if there are multiple lots , it takes
time for them to carry out RR and UD.
Thanks for your reply!!! -
IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast
Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
Restore iPad to Factory Settings
http://support.apple.com/kb/ht1414
Download Past Purchases
http://support.apple.com/kb/ht2519 -
Copy/paste function not working in Firefox 22. Always good in previous versions
Copy/paste function not working in Firefox 22. Always good in previous versions editions
Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P. -
SQL*Plus COPY command does not work
SQL*Plus COPY command does not work in SQL Developer. I am using SQL Developer 1.5.1 on Windows XP.
copy from <source_db_connection> to <target_db_connection> create <target_tab_name> using select * from <source_tab_name>
Does it work on different versions of SQL Developer ?
Anyone had any success in trying COPY command in SQL Developer?
Thanks in advance.While it hasn't been updated for v1.5, this page lists the supported SQL*Plus commands. COPY is explicitly listed as not supported.
theFurryOne -
I reinstalled microsoft word and now have a copy that will not work that is the default
I reinstalled microsoft word and now have a copy that will not work that is the default
I have MS word 2008 for MAC version 12.1
When I left click the MS word applications that is the default seems to be corrupted as indicated by the message below but when I right click i can select the second MS word application that works. The message from the left click is
Process: Microsoft Word [10367]
Path: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier: com.microsoft.Word
Version: ??? (???)
Build Info: Unknown-80409~0
Code Type: X86 (Native)
Parent Process: launchd [128]
Date/Time: 2011-07-25 17:25:09.413 -0400
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 166920 sec
Crashes Since Last Report: 5
Per-App Crashes Since Last Report: 5
Anonymous UUID: 1C5621D4-1D85-488D-A24C-CB298759DBC6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
Referenced from: /Users/geralddowling/Library/Mail Downloads/Microsoft Word.app/Contents/MacOS/Microsoft Word
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x24300000
USB Device: Cruzer Mini, 0x0781 (SanDisk Corporation), 0x5150, 0x24310000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0x24320000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Back-UPS ES 750 FW:841.I3 .D USB FW:I3, 0x051d (American Power Conversion), 0x0002, 0x06400000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000 -
Dear Experts,
In the production server copying inspection results is possible with one user ID but with another user ID it is giving error. Please let me know if there is any particular related authorization object.
Regards
SunitDear what is the error description and error code or else you can check the missing authorization object by entering SU53 in error screen and check with basis guy.
Cheers
KK -
When I try to make a copy of something the arrow just keeps spinning and never allows me to copy.
Hi , Welcome to the HP Forums! I understand that the copy function does not work with your HP Envy 5530. I am happy to look into this copying issue for you! So I have a better understanding of your question. Is this happening when printing from the computer? Or, when you place a sheet of paper on the glass and select copy? If you are trying to print from the computer, what Operating System do you have? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. In the meantime, please make sure the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. Also, you will want to make sure the printer's firmware is up-to-date. Getting Printer Updates for HP Photosmart 5520 e-All-in-One, HP ENVY 5530 e-All-in-One, and HP Deskjet Ink Advantage 4510 and 5520 e-All-in-One Printer Series. Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”
-
Why does the "fix" for firefox copying and pasting not work?
I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.
In what way is Firefox slow?
Is this all the time or only with loading web pages?
What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?
Maybe you are looking for
-
'register with shared services' option missing while configuring eas
I am facing some issues while configuring a new epm system: While configuring eas 11.1.2.0, I am not getting the option' Register with Shared Services'. but otherwise, the configuration is successful. As a result, I don't see the Business Rules optio
-
Image of e-mail sender not appearing in e-mail even though it's in Contacts
From Gizmodo: "If you receive an email from a person who has a picture in your contacts, you'll now see a tiny image of him or her in the corner." Sometimes I see the image, but most of the time I do not. And, yes, I confirmed that the image does app
-
Azureus file download problems....
Hi there, im pretty new to torrents so im sorry if this is an easy problem to rectify- as i said, im pretty new to it all so bare with me... Ok, so i have Azureus V 3.006 (the blue frog:P) Anyway up in till this morning it was working fine, i would s
-
I/O Recommendations please
Hi, I want to record up to 8 tracks simultaneously and have midi i/p. What interface would you recommend on a budget of about £250 I've seen an Alesis io14 which gives the Midi as well but I think it needs extra hardware to get 8 inputs? There's an E
-
i am having a little trouble trying to get cfexecute to create a symbolic link on linux. i am using the below cfexecute tag to try and mimic what i am doing from the command line, but no link is made and no output is received from the cfexecute tag.